|
|
STS-100 Crew Portrait
| Name of Image |
STS-100 Crew Portrait |
| Date of Image |
2001-03-01 |
| Full Description |
This is the official crew portrait of the STS-100 mission. Seated are astronauts Kent V. Rominger, (left) and Jeffrey S. Ashby, commander and pilot, respectively. Standing (from the left) are cosmonaut Yuri V. Lonchakov with astronauts Scott E. Parazynski, Umberto Guidoni of the European Space Agency, Chris A. Hadfield, and John L. Phillips, all mission specialists. The seven launched from the Kennedy Space Center aboard the Space shuttle Orbiter Endeavour on April 19, 2001 for an 11-day mission. The STS-100 mission, the sixth International Space Station (ISS) assembly flight, accomplished the following objectives: The delivery of the Canadian-built Space Station Remote Manipulator System (SSRMS), Canadarm2, which is needed to perform assembly operations on later flights, The delivery and installation of a UHF antenna that provides space-to-space communications capability for U.S.-based space walks, and carried the Italian-built Multipurpose Logistics Module Raffaello containing six system racks and two storage racks for the U.S. Lab, Destiny. |
|
STS-100 Mission Lifts off Ab
| Name of Image |
STS-100 Mission Lifts off Aboard Endeavour |
| Date of Image |
2001-04-19 |
| Full Description |
The sixth International Space Station (ISS) assembly flight, STS-100, blasted from the launch pad aboard the Space Shuttle Orbiter Endeavour on April 19, 2001. Onboard were astronauts Kent V. Rominger, Jeffrey S. Ashby, Scott E. Parazynski, Chris A. Hadfield, John Phillips, and Umberto Guidoni of the European Space agency, along with cosmonaut Yuri V. Lonchakov for an 11-day mission. Mission objectives included: The delivery of the second Canadian Remote Mainpultor System, Canadarm2, which is needed to perform assembly operations on later flights, The delivery and installation of a UHF anterna that provides space-to-space communications capability for U.S.-based space walks, and carried the Italian-built Multi-Purpose Logistics Module Raffaello containing six system racks and two storage racks for the U.S. Lab, Destiny. |
|
STS-100 Mission Lifts Off Ab
| Name of Image |
STS-100 Mission Lifts Off Aboard Endeavor |
| Date of Image |
2001-04-19 |
| Full Description |
The sixth International Space Station (ISS) assembly flight, STS-100, blasted from the launch pad aboard the Space Shuttle Orbiter Endeavour on April 19, 2001. Onboard were astronauts Kent V. Rominger, Jeffrey S. Ashby, Scott E. Parazynski, Chris A. Hadfield, John Phillips, and Umberto Guidoni of the European Space agency, along with cosmonaut Yuri V. Lonchakov for an 11-day mission. Mission objectives included: The delivery of the second Canadian Remote Manipulator System, Canadarm2, which is needed to perform assembly operations on later flights, The delivery and installation of a UHF anterna that provides space-to-space communications capability for U.S.-based space walks, and carried the Italian-built Multipurpose Logistics Module Raffaello containing six system racks and two storage racks for the U.S. Lab, Destiny. |
|
| General Description |
STS-100 Shuttle Mission Imagery |
|
A worker (left) in the Space
| Description |
A worker (left) in the Space Station Processing Facility explains use of the equipment in the foreground to STS-100 Mission Specialist Umberto Guidoni (center) and Commander Kent Rominger (right). Guidoni is with the European Space Agency. Mission STS-100, scheduled to launch April 19, 2001, will include the Multi-Purpose Logistics Module (MPLM) Raffaello and the Space Station Remote Manipulator System (SSRMS) as its payload. MPLMs are pressurized modules that will serve as the International Space Station's ?moving vans,? carrying laboratory racks filled with equipment, experiments and supplies to and from the station aboard the Space Shuttle. The SSRMS is the primary means of transferring payloads between the orbiter payload bay and the International Space Station for assembly |
| Release Date |
09/28/2000 |
|
With workers (far left and f
| Description |
With workers (far left and far right) looking on, STS-100 Commander Kent Rominger tries out a piece of equipment while Mission Specialist Umberto Guidoni (leaning over) watches. Guidoni is with the European Space Agency. Mission STS-100, scheduled to launch April 19, 2001, will include Raffaello as well as the Space Station Remote Manipulator System (SSRMS) as its payload. MPLMs are pressurized modules that will serve as the International Space Station's ?moving vans,? carrying laboratory racks filled with equipment, experiments and supplies to and from the station aboard the Space Shuttle. The SSRMS is the primary means of transferring payloads between the orbiter payload bay and the International Space Station for assembly |
| Release Date |
09/29/2000 |
|
In the Space Station Process
| Description |
In the Space Station Processing Facility, STS-100 Commander Kent Rominger (left) tries out a piece of equipment while a worker (center) gives directions. Looking on at right is Mission Specialist Umberto Guidoni, with the European Space Agency. Mission STS-100, scheduled to launch April 19, 2001, will include Raffaello as well as the Space Station Remote Manipulator System (SSRMS) as its payload. MPLMs are pressurized modules that will serve as the International Space Station's ?moving vans,? carrying laboratory racks filled with equipment, experiments and supplies to and from the station aboard the Space Shuttle. The SSRMS is the primary means of transferring payloads between the orbiter payload bay and the International Space Station for assembly |
| Release Date |
09/29/2000 |
|
In the Space Station Process
| Description |
In the Space Station Processing Facility, STS-100 Mission Specialist Umberto Guidoni (left) and Commander Kent Rominger (center back), along with two workers, take a close look at equipment on the floor. Guidoni is with the European Space Agency. Mission STS-100, scheduled to launch April 19, 2001, will include the Multi-Purpose Logistics Module (MPLM) Raffaello and the Space Station Remote Manipulator System (SSRMS) as its payload. MPLMs are pressurized modules that will serve as the International Space Station's ?moving vans,? carrying laboratory racks filled with equipment, experiments and supplies to and from the station aboard the Space Shuttle. The SSRMS is the primary means of transferring payloads between the orbiter payload bay and the International Space Station for assembly |
| Release Date |
09/29/2000 |
|
STS-100 Commander Kent Romin
| Description |
STS-100 Commander Kent Rominger and Mission Specialist Umberto Guidoni, who is with the European Space Agency, look over the inside of Raffaello, a Multi-Purpose Logistics Module. Mission STS-100, scheduled to launch April 19, 2001, will include Raffaello as well as the Space Station Remote Manipulator System (SSRMS) as its payload. MPLMs are pressurized modules that will serve as the International Space Station's ?moving vans,? carrying laboratory racks filled with equipment, experiments and supplies to and from the station aboard the Space Shuttle. The SSRMS is the primary means of transferring payloads between the orbiter payload bay and the International Space Station for assembly |
| Release Date |
09/29/2000 |
|
With workers looking on, STS
| Description |
With workers looking on, STS-100 crew members check out equipment inside the Multi-Purpose Logistics Module Raffaello, located in the Space Station Processing Facility. Standing at center is Mission Specialist Umberto Guidoni, with the European Space Agency. Kneeling at right is Commander Kent Rominger. Mission STS-100, scheduled to launch April 19, 2001, will include Raffaello as well as the Space Station Remote Manipulator System (SSRMS) as its payload. MPLMs are pressurized modules that will serve as the International Space Station's ?moving vans,? carrying laboratory racks filled with equipment, experiments and supplies to and from the station aboard the Space Shuttle. The SSRMS is the primary means of transferring payloads between the orbiter payload bay and the International Space Station for assembly |
| Release Date |
09/29/2000 |
|
STS-100 Commander Kent Romin
| Description |
STS-100 Commander Kent Rominger and Mission Specialist Umberto Guidoni (right), with the European Space Agency, pose for a photo during Crew Equipment Interface Test activities in the Space Station Processing Facility. Behind them is the Space Station Remote Manipulator System (SSRMS), also known as the Canadian arm, which is part of the payload on their mission. The SSRMS is the primary means of transferring payloads between the orbiter payload bay and the International Space Station for assembly. The 56-foot-long robotic arm includes two 12-foot booms joined by a hinge. Seven joints on the arm allow highly flexible and precise movement. The payload also includes the Multi-Purpose Logistics Module (MPLM) Raffaello. MPLMs are pressurized modules that will serve as the International Space Station's ?moving vans,? carrying laboratory racks filled with equipment, experiments and supplies to and from the station aboard the Space Shuttle. Mission STS-100 is scheduled to launch April 19, 2001 |
| Release Date |
09/28/2000 |
|
With workers at left looking
| Description |
With workers at left looking on, STS-100 crew members check out equipment inside the Multi-Purpose Logistics Module Raffaello, located in the Space Station Processing Facility. At right is Commander Kent Rominger, to his left in the photo is Mission Specialist Umberto Guidoni, with the European Space Agency. Mission STS-100, scheduled to launch April 19, 2001, will include Raffaello as well as the Space Station Remote Manipulator System (SSRMS) as its payload. MPLMs are pressurized modules that will serve as the International Space Station's ?moving vans,? carrying laboratory racks filled with equipment, experiments and supplies to and from the station aboard the Space Shuttle. The SSRMS is the primary means of transferring payloads between the orbiter payload bay and the International Space Station for assembly |
| Release Date |
09/29/2000 |
|
In the Space Station Process
| Description |
In the Space Station Processing Facility, STS-100 Commander Kent Rominger and Mission Specialist Umberto Guidoni, who is with the European Space Agency, look over equipment on the floor. Mission STS-100, scheduled to launch April 19, 2001, will include the Multi-Purpose Logistics Module (MPLM) Raffaello and the Space Station Remote Manipulator System (SSRMS) as its payload. MPLMs are pressurized modules that will serve as the International Space Station's ?moving vans,? carrying laboratory racks filled with equipment, experiments and supplies to and from the station aboard the Space Shuttle. The SSRMS is the primary means of transferring payloads between the orbiter payload bay and the International Space Station for assembly |
| Release Date |
09/29/2000 |
|
|