Browse All : Images by Stephen Robinson

Description	The seven crew members in training for the STS-95 mission aboard Discovery pose for photographers prior to participating in a training session at NASA's Johnson Space Center. Pictured, from the left, are Pedro Duque, Curtis Brown, Chiaki Nauto-Mukai, then-U.S. Sen. John H. Glenn Jr. (D.-Ohio), Stephen Robinson, Steven Lindsey and Scott Parazynski. Sen. Glenn, who served as a payload specialist for the mission, launched with the Discovery crew on Oct. 29, 1998. On Feb. 20, 1962, Glenn piloted the Mercury-Atlas 6 Friendship 7 spacecraft on America's first manned orbital mission. Image Credit: NASA
Date	10/29/09

The crew of Space Shuttle mission STS-114 gathered for a press brief following landing at Edwards Air Force Base, California, 5:11 am, August 9, 2005. Left to right: Mission Specialists Charles Camarda, Wendy Lawrence and Stephen Robinson, Commander Eileen Collins at microphone, Mission Specialists Andrew Thomas and Soichi Noguchi, and Pilot James Kelly. Space Shuttle Discovery landed safely at NASA's Dryden Flight Research Center at Edwards Air Force Base in California at 5:11:22 a.m. PDT this morning, following the very successful 14-day STS-114 return to flight mission. During their two weeks in space, Commander Eileen Collins and her six crewmates tested out new safety procedures and delivered supplies and equipment the International Space Station. Discovery spent two weeks in space, where the crew demonstrated new methods to inspect and repair the Shuttle in orbit. The crew also delivered supplies, outfitted and performed maintenance on the International Space Station. A number of these tasks were conducted during three spacewalks. In an unprecedented event, spacewalkers were called upon to remove protruding gap fillers from the heat shield on Discovery's underbelly. In other spacewalk activities, astronauts installed an external platform onto the Station's Quest Airlock and replaced one of the orbital outpost's Control Moment Gyroscopes. Inside the Station, the STS-114 crew conducted joint operations with the Expedition 11 crew. They unloaded fresh supplies from the Shuttle and the Raffaello Multi-Purpose Logistics Module. Before Discovery undocked, the crews filled Raffeallo with unneeded items and returned to Shuttle payload bay. Discovery launched on July 26 and spent almost 14 days on orbit.

Photo Description	The crew of Space Shuttle mission STS-114 gathered for a press brief following landing at Edwards Air Force Base, California, 5:11 am, August 9, 2005. Left to right: Mission Specialists Charles Camarda, Wendy Lawrence and Stephen Robinson, Commander Eileen Collins at microphone, Mission Specialists Andrew Thomas and Soichi Noguchi, and Pilot James Kelly. Space Shuttle Discovery landed safely at NASA's Dryden Flight Research Center at Edwards Air Force Base in California at 5:11:22 a.m. PDT this morning, following the very successful 14-day STS-114 return to flight mission. During their two weeks in space, Commander Eileen Collins and her six crewmates tested out new safety procedures and delivered supplies and equipment the International Space Station. Discovery spent two weeks in space, where the crew demonstrated new methods to inspect and repair the Shuttle in orbit. The crew also delivered supplies, outfitted and performed maintenance on the International Space Station. A number of these tasks were conducted during three spacewalks. In an unprecedented event, spacewalkers were called upon to remove protruding gap fillers from the heat shield on Discovery's underbelly. In other spacewalk activities, astronauts installed an external platform onto the Station's Quest Airlock and replaced one of the orbital outpost's Control Moment Gyroscopes. Inside the Station, the STS-114 crew conducted joint operations with the Expedition 11 crew. They unloaded fresh supplies from the Shuttle and the Raffaello Multi-Purpose Logistics Module. Before Discovery undocked, the crews filled Raffeallo with unneeded items and returned to Shuttle payload bay. Discovery launched on July 26 and spent almost 14 days on orbit.
Project Description	STS-114
Photo Date	August 9, 2005

The crew of Space Shuttle mission STS-114 gathered in front of the shuttle Discovery following landing at Edwards Air Force Base, California, August 9, 2005. From left to right: Mission Specialist Stephen Robinson, Commander Eileen Collins, Mission Specialists Andrew Thomas, Wendy Lawrence, Soichi Noguchi and Charles Camarda, and Pilot James Kelly. Space Shuttle Discovery landed safely at NASA's Dryden Flight Research Center at Edwards Air Force Base in California at 5:11:22 a.m. PDT this morning, following the very successful 14-day STS-114 return to flight mission. During their two weeks in space, Commander Eileen Collins and her six crewmates tested out new safety procedures and delivered supplies and equipment the International Space Station. Discovery spent two weeks in space, where the crew demonstrated new methods to inspect and repair the Shuttle in orbit. The crew also delivered supplies, outfitted and performed maintenance on the International Space Station. A number of these tasks were conducted during three spacewalks. In an unprecedented event, spacewalkers were called upon to remove protruding gap fillers from the heat shield on Discovery's underbelly. In other spacewalk activities, astronauts installed an external platform onto the Station's Quest Airlock and replaced one of the orbital outpost's Control Moment Gyroscopes. Inside the Station, the STS-114 crew conducted joint operations with the Expedition 11 crew. They unloaded fresh supplies from the Shuttle and the Raffaello Multi-Purpose Logistics Module. Before Discovery undocked, the crews filled Raffeallo with unneeded items and returned to Shuttle payload bay. Discovery launched on July 26 and spent almost 14 days on orbit.

Photo Description	The crew of Space Shuttle mission STS-114 gathered in front of the shuttle Discovery following landing at Edwards Air Force Base, California, August 9, 2005. From left to right: Mission Specialist Stephen Robinson, Commander Eileen Collins, Mission Specialists Andrew Thomas, Wendy Lawrence, Soichi Noguchi and Charles Camarda, and Pilot James Kelly. Space Shuttle Discovery landed safely at NASA's Dryden Flight Research Center at Edwards Air Force Base in California at 5:11:22 a.m. PDT this morning, following the very successful 14-day STS-114 return to flight mission. During their two weeks in space, Commander Eileen Collins and her six crewmates tested out new safety procedures and delivered supplies and equipment the International Space Station. Discovery spent two weeks in space, where the crew demonstrated new methods to inspect and repair the Shuttle in orbit. The crew also delivered supplies, outfitted and performed maintenance on the International Space Station. A number of these tasks were conducted during three spacewalks. In an unprecedented event, spacewalkers were called upon to remove protruding gap fillers from the heat shield on Discovery's underbelly. In other spacewalk activities, astronauts installed an external platform onto the Station's Quest Airlock and replaced one of the orbital outpost's Control Moment Gyroscopes. Inside the Station, the STS-114 crew conducted joint operations with the Expedition 11 crew. They unloaded fresh supplies from the Shuttle and the Raffaello Multi-Purpose Logistics Module. Before Discovery undocked, the crews filled Raffeallo with unneeded items and returned to Shuttle payload bay. Discovery launched on July 26 and spent almost 14 days on orbit.
Project Description	STS-114
Photo Date	August 9, 2005

NASA DFRC Deputy Director Steven Schmidt and DFRC Shuttle Program Manager Joe D'Agostino greet Commander Eileen Collins and the crew of STS-114. Left to right: Steven G. Schmidt, deputy director of the NASA Dryden Flight Research Center, Joe D'Agostino, DFRC Space Shuttle Flight Management Support Specialist, STS-114 Commander Eileen Collins and Mission Specialists Andrew Thomas and Stephen Robinson. Space Shuttle Discovery landed safely at NASA's Dryden Flight Research Center at Edwards Air Force Base in California at 5:11:22 a.m. PDT this morning, following the very successful 14-day STS-114 return to flight mission. During their two weeks in space, Commander Eileen Collins and her six crewmates tested out new safety procedures and delivered supplies and equipment the International Space Station. Discovery spent two weeks in space, where the crew demonstrated new methods to inspect and repair the Shuttle in orbit. The crew also delivered supplies, outfitted and performed maintenance on the International Space Station. A number of these tasks were conducted during three spacewalks. In an unprecedented event, spacewalkers were called upon to remove protruding gap fillers from the heat shield on Discovery's underbelly. In other spacewalk activities, astronauts installed an external platform onto the Station's Quest Airlock and replaced one of the orbital outpost's Control Moment Gyroscopes. Inside the Station, the STS-114 crew conducted joint operations with the Expedition 11 crew. They unloaded fresh supplies from the Shuttle and the Raffaello Multi-Purpose Logistics Module. Before Discovery undocked, the crews filled Raffeallo with unneeded items and returned to Shuttle payload bay. Discovery launched on July 26 and spent almost 14 days on orbit.

Photo Description	NASA DFRC Deputy Director Steven Schmidt and DFRC Shuttle Program Manager Joe D'Agostino greet Commander Eileen Collins and the crew of STS-114. Left to right: Steven G. Schmidt, deputy director of the NASA Dryden Flight Research Center, Joe D'Agostino, DFRC Space Shuttle Flight Management Support Specialist, STS-114 Commander Eileen Collins and Mission Specialists Andrew Thomas and Stephen Robinson. Space Shuttle Discovery landed safely at NASA's Dryden Flight Research Center at Edwards Air Force Base in California at 5:11:22 a.m. PDT this morning, following the very successful 14-day STS-114 return to flight mission. During their two weeks in space, Commander Eileen Collins and her six crewmates tested out new safety procedures and delivered supplies and equipment the International Space Station. Discovery spent two weeks in space, where the crew demonstrated new methods to inspect and repair the Shuttle in orbit. The crew also delivered supplies, outfitted and performed maintenance on the International Space Station. A number of these tasks were conducted during three spacewalks. In an unprecedented event, spacewalkers were called upon to remove protruding gap fillers from the heat shield on Discovery's underbelly. In other spacewalk activities, astronauts installed an external platform onto the Station's Quest Airlock and replaced one of the orbital outpost's Control Moment Gyroscopes. Inside the Station, the STS-114 crew conducted joint operations with the Expedition 11 crew. They unloaded fresh supplies from the Shuttle and the Raffaello Multi-Purpose Logistics Module. Before Discovery undocked, the crews filled Raffeallo with unneeded items and returned to Shuttle payload bay. Discovery launched on July 26 and spent almost 14 days on orbit.
Project Description	unknown
Photo Date	August 9, 2005

Title	Maneuvering in Space
Explanation	What arm is 17 meters long and sometimes uses humans for fingers? The Canadarm2 [ http://en.wikipedia.org/wiki/Canadarm2 ] aboard the International Space Station [ http://antwrp.gsfc.nasa.gov/apod/ap060516.html ] (ISS). Canadarm2 has multiple joints and is capable of maneuvering payloads as massive as 116,000 kilograms, equivalent to a fully loaded bus. Canadarm2 [ http://spaceflight.nasa.gov/station/assembly/elements/mss/index.html ] is operated by remote control by a human inside the space station [ http://www.nasa.gov/mission_pages/station/main/index.html ]. To help with tasks requiring a particularly high level of precision and detail, an astronaut can be anchored to an attached foot constraint. The arm is able propel itself [ http://en.wikipedia.org/wiki/Inchworm ] end-over-end around the outside of the space station. Pictured above [ http://spaceflight.nasa.gov/gallery/images/shuttle/sts-114/html/s114e6646.html ], astronaut Stephen Robinson [ http://www.jsc.nasa.gov/Bios/htmlbios/robinson.html ] rides Canadarm2 during the STS-114 [ http://www.nasa.gov/returntoflight/crew/index.html ] mission of the space shuttle Discovery [ http://antwrp.gsfc.nasa.gov/apod/ap050802.html ] to the ISS in 2005 August. Space shuttles often deploy their own original version of a robotic arm [ http://www.space.gc.ca/asc/eng/exploration/canadarm/backgrounder.asp ] dubbed Canadarm [ http://en.wikipedia.org/wiki/Canadarm ]. Next year, a second robotic arm [ http://en.wikipedia.org/wiki/European_Robotic_Arm ] is scheduled to be deployed on the space station.

Various views of activities with the STS-95 crew on the middeck

mediatype	IMAGE
mediatype	image
date	1998-11-19
creator	NASA
identifier	STS095-356-022

Group 15, 1995 Astronaut Class Candidates (ASCANs) participate in training

mediatype	IMAGE
mediatype	image
date	1996-02-22
creator	NASA
identifier	S96-03658

mediatype	IMAGE
mediatype	image
date	1998-11-19
creator	NASA
identifier	STS095-356-003

mediatype	IMAGE
mediatype	image
date	1996-02-22
creator	NASA
identifier	S96-03655

mediatype	IMAGE
mediatype	image
date	1996-02-22
creator	NASA
identifier	S96-03634

mediatype	IMAGE
mediatype	image
date	1996-02-22
creator	NASA
identifier	S96-03641

mediatype	IMAGE
mediatype	image
date	1996-02-22
creator	NASA
identifier	S96-03649

General Description	STS-95 Shuttle Mission Imagery

KENNEDY SPACE CENTER, FLA. - Inside the MILA Spaceflight Tracking and Data Network Station during a visit to Kennedy, members of the STS-114 crew listen to Gary Morse (left), incumbent MILA/PDL station director. (MILA refers to Merritt Island Launch Area, PDL designates the Ponce De Leon Inlet site.) The astronauts, from left, are Mission Specialists Andrew Thomas, Wendy Lawrence and Stephen Robinson, and Commander Eileen Collins. The tracking station serves as the primary voice, data and telemetry communications link between the Shuttle and the ground from launch until 7-1/2 minutes into the flight. Millions of clues about the performance of the Space Shuttle?s main engines and other components are communicated to launch managers, technicians and engineers on the ground, who must keep their fingers on the pulse of the Space Shuttle during the critical ascent period. In a typical year, MILA provides through KSC more than 10,000 hours of data between spacecraft and data users. MILA is also used during a Space Shuttle landing at KSC and provides communications beginning about 13 minutes before touchdown. Also, MILA can be called upon to provide data transfer support for NASA?s Expendable Launch Vehicle missions and orbiting scientific satellites.

Description	KENNEDY SPACE CENTER, FLA. - Inside the MILA Spaceflight Tracking and Data Network Station during a visit to Kennedy, members of the STS-114 crew listen to Gary Morse (left), incumbent MILA/PDL station director. (MILA refers to Merritt Island Launch Area, PDL designates the Ponce De Leon Inlet site.) The astronauts, from left, are Mission Specialists Andrew Thomas, Wendy Lawrence and Stephen Robinson, and Commander Eileen Collins. The tracking station serves as the primary voice, data and telemetry communications link between the Shuttle and the ground from launch until 7-1/2 minutes into the flight. Millions of clues about the performance of the Space Shuttle?s main engines and other components are communicated to launch managers, technicians and engineers on the ground, who must keep their fingers on the pulse of the Space Shuttle during the critical ascent period. In a typical year, MILA provides through KSC more than 10,000 hours of data between spacecraft and data users. MILA is also used during a Space Shuttle landing at KSC and provides communications beginning about 13 minutes before touchdown. Also, MILA can be called upon to provide data transfer support for NASA?s Expendable Launch Vehicle missions and orbiting scientific satellites.
Release Date	12/13/2004

KENNEDY SPACE CENTER, FLA. - On a visit to Kennedy, STS-114 Mission Specialist Stephen Robinson (right) points out an area above the orbiter Discovery to Commander Eileen Collins (left). Discovery is in the Orbiter Processing Facility for launch processing. Discovery is scheduled for a launch planning window of May 12 to June 3, 2005.

Description	KENNEDY SPACE CENTER, FLA. - On a visit to Kennedy, STS-114 Mission Specialist Stephen Robinson (right) points out an area above the orbiter Discovery to Commander Eileen Collins (left). Discovery is in the Orbiter Processing Facility for launch processing. Discovery is scheduled for a launch planning window of May 12 to June 3, 2005.
Release Date	12/13/2004

KENNEDY SPACE CENTER, FLA. - On a visit to Kennedy, STS-114 Mission Specialist Stephen Robinson looks at the tiles, part of the Thermal Protection System, on the belly of the orbiter Discovery. The designated vehicle for the mission, Discovery is in the Orbiter Processing Facility for launch processing. Discovery is scheduled for a launch planning window of May 12 to June 3, 2005.

Description	KENNEDY SPACE CENTER, FLA. - On a visit to Kennedy, STS-114 Mission Specialist Stephen Robinson looks at the tiles, part of the Thermal Protection System, on the belly of the orbiter Discovery. The designated vehicle for the mission, Discovery is in the Orbiter Processing Facility for launch processing. Discovery is scheduled for a launch planning window of May 12 to June 3, 2005.
Release Date	12/13/2004

KENNEDY SPACE CENTER, FLA. - During a visit to Kennedy, at the MILA Spaceflight Tracking and Data Network Station, members of the STS-114 crew listen to Gary Morse (center), incumbent MILA/PDL station director. (MILA refers to Merritt Island Launch Area, PDL designates the Ponce De Leon Inlet site.) The astronauts, from left, are Pilot James Kelly, Mission Specialists Andrew Thomas, Wendy Lawrence and Stephen Robinson, and Commander Eileen Collins. The tracking station serves as the primary voice, data and telemetry communications link between the Shuttle and the ground from launch until 7-1/2 minutes into the flight. Millions of clues about the performance of the Space Shuttle?s main engines and other components are communicated to launch managers, technicians and engineers on the ground, who must keep their fingers on the pulse of the Space Shuttle during the critical ascent period. In a typical year, MILA provides through KSC more than 10,000 hours of data between spacecraft and data users. MILA is also used during a Space Shuttle landing at KSC and provides communications beginning about 13 minutes before touchdown. Also, MILA can be called upon to provide data transfer support for NASA?s Expendable Launch Vehicle missions and orbiting scientific satellites.

Description	KENNEDY SPACE CENTER, FLA. - During a visit to Kennedy, at the MILA Spaceflight Tracking and Data Network Station, members of the STS-114 crew listen to Gary Morse (center), incumbent MILA/PDL station director. (MILA refers to Merritt Island Launch Area, PDL designates the Ponce De Leon Inlet site.) The astronauts, from left, are Pilot James Kelly, Mission Specialists Andrew Thomas, Wendy Lawrence and Stephen Robinson, and Commander Eileen Collins. The tracking station serves as the primary voice, data and telemetry communications link between the Shuttle and the ground from launch until 7-1/2 minutes into the flight. Millions of clues about the performance of the Space Shuttle?s main engines and other components are communicated to launch managers, technicians and engineers on the ground, who must keep their fingers on the pulse of the Space Shuttle during the critical ascent period. In a typical year, MILA provides through KSC more than 10,000 hours of data between spacecraft and data users. MILA is also used during a Space Shuttle landing at KSC and provides communications beginning about 13 minutes before touchdown. Also, MILA can be called upon to provide data transfer support for NASA?s Expendable Launch Vehicle missions and orbiting scientific satellites.
Release Date	12/13/2004

KENNEDY SPACE CENTER, FLA. - On a visit to Kennedy, members of the STS-114 crew stop by the Orbiter Processing Facility to look at the designated orbiter vehicle for the mission, Discovery. Mission Specialists Stephen Robinson (left) and Andrew Thomas are at right, looking at an engine recently installed on the orbiter. Discovery is scheduled for a launch planning window of May 12 to June 3, 2005.

Description	KENNEDY SPACE CENTER, FLA. - On a visit to Kennedy, members of the STS-114 crew stop by the Orbiter Processing Facility to look at the designated orbiter vehicle for the mission, Discovery. Mission Specialists Stephen Robinson (left) and Andrew Thomas are at right, looking at an engine recently installed on the orbiter. Discovery is scheduled for a launch planning window of May 12 to June 3, 2005.
Release Date	12/13/2004

KENNEDY SPACE CENTER, FLA. - On a visit to Kennedy, STS-114 Mission Specialist Stephen Robinson views closely one of the main engines recently installed on Discovery, the designated vehicle for the mission. Discovery is in the Orbiter Processing Facility for launch processing. Discovery is scheduled for a launch planning window of May 12 to June 3, 2005.

Description	KENNEDY SPACE CENTER, FLA. - On a visit to Kennedy, STS-114 Mission Specialist Stephen Robinson views closely one of the main engines recently installed on Discovery, the designated vehicle for the mission. Discovery is in the Orbiter Processing Facility for launch processing. Discovery is scheduled for a launch planning window of May 12 to June 3, 2005.
Release Date	12/13/2004

Description	KENNEDY SPACE CENTER, FLA. - On a visit to Kennedy, members of the STS-114 crew stop by the Orbiter Processing Facility to look at the designated orbiter vehicle for the mission, Discovery. Mission Specialists Andrew Thomas and Stephen Robinson are seen here on some of the scaffolding surrounding the orbiter. Discovery is scheduled for a launch planning window of May 12 to June 3, 2005.
Release Date	12/13/2004

KENNEDY SPACE CENTER, FLA. - On a visit to Kennedy, STS-114 Mission Specialist Stephen Robinson looks inside the wing of the orbiter Discovery, which is in the Orbiter Processing Facility for launch processing. Discovery is scheduled for a launch planning window of May 12 to June 3, 2005.

Description	KENNEDY SPACE CENTER, FLA. - On a visit to Kennedy, STS-114 Mission Specialist Stephen Robinson looks inside the wing of the orbiter Discovery, which is in the Orbiter Processing Facility for launch processing. Discovery is scheduled for a launch planning window of May 12 to June 3, 2005.
Release Date	12/13/2004

KENNEDY SPACE CENTER, FLA. - Photographers and journalists gather in the Space Station Processing Facility (SSPF) to interview and photograph the STS-114 crew. Crew members from left are ) Mission Specialists Charles Camarda, Wendy Lawrence, Stephen Robinson, Soichi Noguchi (with the Japanese Space Agency) and Andrew Thomas, Commander Eileen Collins, and Pilot James Kelly. The crew is looking over some of the hardware in the SSPF. The crew is at KSC for Crew Equipment Interface Test (CEIT) activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on-orbit. The Return to Flight mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - Photographers and journalists gather in the Space Station Processing Facility (SSPF) to interview and photograph the STS-114 crew. Crew members from left are ) Mission Specialists Charles Camarda, Wendy Lawrence, Stephen Robinson, Soichi Noguchi (with the Japanese Space Agency) and Andrew Thomas, Commander Eileen Collins, and Pilot James Kelly. The crew is looking over some of the hardware in the SSPF. The crew is at KSC for Crew Equipment Interface Test (CEIT) activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on-orbit. The Return to Flight mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/10/2005

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, members of the STS-114 crew look at Discovery, the orbiter designated for the Return to Flight mission. The crew members seen in front are Mission Specialists Soichi Noguchi (with the Japanese Space Agency) and Stephen Robinson, in back are Mission Specialist Andrew Thomas (back to camera) and Commander Eileen Collins. With them are Cindy Begley (left), lead EVA flight controller, and Christi Hansen (right), EVA trainer. The crew is at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the orbiter and equipment they will be working with on the mission. Return to Flight Mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, members of the STS-114 crew look at Discovery, the orbiter designated for the Return to Flight mission. The crew members seen in front are Mission Specialists Soichi Noguchi (with the Japanese Space Agency) and Stephen Robinson, in back are Mission Specialist Andrew Thomas (back to camera) and Commander Eileen Collins. With them are Cindy Begley (left), lead EVA flight controller, and Christi Hansen (right), EVA trainer. The crew is at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the orbiter and equipment they will be working with on the mission. Return to Flight Mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/10/2005

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 Mission Specialists Soichi Noguchi, left, (with the Japanese Space Agency), Stephen Robinson, center, and Andrew Thoma, right, look closely at the tiles over the nose cap on Discovery. On the far right is Cindy Begley, lead EVA flight controller. The tiles are part of the Thermal Protection System on the orbiter. They and other crew members are at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the orbiter and equipment they will be working with on the mission. Return to Flight Mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 Mission Specialists Soichi Noguchi, left, (with the Japanese Space Agency), Stephen Robinson, center, and Andrew Thoma, right, look closely at the tiles over the nose cap on Discovery. On the far right is Cindy Begley, lead EVA flight controller. The tiles are part of the Thermal Protection System on the orbiter. They and other crew members are at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the orbiter and equipment they will be working with on the mission. Return to Flight Mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/10/2005

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, members of the STS-114 crew take a close look at the Reinforced Carbon-Carbon on the wing?s leading edge on Discovery. From left are Mission Specialists Soichi Noguchi (with the Japanese Space Agency), Charles Camarda and Andrew Thomas, accompanied by Cindy Begley, lead EVA flight controller. At right is Mission Specialist Stephen Robinson, with Christi Hansen, EVA trainer. The crew is at KSC for Crew Equipment Interface Test activities. The leading edge panels of the orbiters? wings have 22 Reinforced Carbon-Carbon panels, made entirely of carbon composite material. The molded components are approximately 0.25-inch to 0.5-inch thick. During CEIT, the crew has an opportunity to get a hands-on look at the orbiter and equipment they will be working with on the mission. Return to Flight Mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, members of the STS-114 crew take a close look at the Reinforced Carbon-Carbon on the wing?s leading edge on Discovery. From left are Mission Specialists Soichi Noguchi (with the Japanese Space Agency), Charles Camarda and Andrew Thomas, accompanied by Cindy Begley, lead EVA flight controller. At right is Mission Specialist Stephen Robinson, with Christi Hansen, EVA trainer. The crew is at KSC for Crew Equipment Interface Test activities. The leading edge panels of the orbiters? wings have 22 Reinforced Carbon-Carbon panels, made entirely of carbon composite material. The molded components are approximately 0.25-inch to 0.5-inch thick. During CEIT, the crew has an opportunity to get a hands-on look at the orbiter and equipment they will be working with on the mission. Return to Flight Mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/10/2005

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, STS-114 crew members look at the replacement Control Moment Gyroscope (CMG) that they will bring to the International Space Station. From left are Mission Specialists Soichi Noguchi (with the Japanese Space Agency), Stephen Robinson and Andrew Thomas. The crew is at KSC for Crew Equipment Interface Test (CEIT) activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on-orbit. The Return to Flight mission STS-114 will also carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, STS-114 crew members look at the replacement Control Moment Gyroscope (CMG) that they will bring to the International Space Station. From left are Mission Specialists Soichi Noguchi (with the Japanese Space Agency), Stephen Robinson and Andrew Thomas. The crew is at KSC for Crew Equipment Interface Test (CEIT) activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on-orbit. The Return to Flight mission STS-114 will also carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/10/2005

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, Mission Specialist Stephen Robinson (left) examines a tool from the Tool Stowage Assembly. He and other crew members are at Kennedy for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, Mission Specialist Stephen Robinson (left) examines a tool from the Tool Stowage Assembly. He and other crew members are at Kennedy for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/11/2005

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, STS-114 Mission Commander Eileen Collins talks to Tip Talone (right), director of International Space Station Payload Processing. Other crew members behind them are Pilot James Kelly (left) and Mission Specialists Andrew Thomas (center left) and Stephen Robinson (center right). The crew is at KSC for Crew Equipment Interface Test (CEIT) activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on-orbit. The Return to Flight mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, STS-114 Mission Commander Eileen Collins talks to Tip Talone (right), director of International Space Station Payload Processing. Other crew members behind them are Pilot James Kelly (left) and Mission Specialists Andrew Thomas (center left) and Stephen Robinson (center right). The crew is at KSC for Crew Equipment Interface Test (CEIT) activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on-orbit. The Return to Flight mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/10/2005

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, members of the STS-114 crew look at tools from the Tool Stowage Assembly. From left are Mission Specialists Stephen Robinson, Andrew Thomas and Soichi Noguchi, who is with the Japanese Space Agency. They and other crew members are at Kennedy for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, members of the STS-114 crew look at tools from the Tool Stowage Assembly. From left are Mission Specialists Stephen Robinson, Andrew Thomas and Soichi Noguchi, who is with the Japanese Space Agency. They and other crew members are at Kennedy for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/11/2005

KENNEDY SPACE CENTER, FLA. - After looking over some of the hardware in the Space Station Processing Facility, STS-114 crew members answer questions from the media. At the microphone is Commander Eileen Collins. Behind her are (left to right) Mission Specialists Charles Camarda, Wendy Lawrence, Stephen Robinson, Soichi Noguchi (with the Japanese Space Agency) and Andrew Thomas, and Pilot James Kelly. The crew is at KSC for Crew Equipment Interface Test (CEIT) activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on-orbit. The Return to Flight mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - After looking over some of the hardware in the Space Station Processing Facility, STS-114 crew members answer questions from the media. At the microphone is Commander Eileen Collins. Behind her are (left to right) Mission Specialists Charles Camarda, Wendy Lawrence, Stephen Robinson, Soichi Noguchi (with the Japanese Space Agency) and Andrew Thomas, and Pilot James Kelly. The crew is at KSC for Crew Equipment Interface Test (CEIT) activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on-orbit. The Return to Flight mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/10/2005

Description	KENNEDY SPACE CENTER, FLA. - Photographers and journalists gather in the Space Station Processing Facility (SSPF) to interview and photograph the STS-114 crew. Crew members from left are ) Mission Specialists Charles Camarda, Wendy Lawrence, Stephen Robinson, Soichi Noguchi (with the Japanese Space Agency) and Andrew Thomas, Pilot James Kelly, and Commander Eileen Collins. The crew is looking over some of the hardware in the SSPF. The Multi-Purpose Logistics Module Raffaello that will fly on mission STS-114 is at right. The crew is at KSC for Crew Equipment Interface Test (CEIT) activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on-orbit. The Return to Flight mission STS-114 will also carry a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/10/2005

Description	KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, members of the STS-114 crew look at Discovery, the orbiter designated for the Return to Flight mission. From left are Mission Specialists Soichi Noguchi (with the Japanese Space Agency), Andrew Thomas and Stephen Robinson. They and other crew members are at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the orbiter and equipment they will be working with on the mission. Return to Flight Mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/10/2005

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, members of the STS-114 crew look at tools from the Tool Stowage Assembly. At left is Mission Specialist Stephen Robinson, at right is Mission Specialist Soichi Noguchi, who is with the Japanese Space Agency. They and other crew members are at Kennedy for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, members of the STS-114 crew look at tools from the Tool Stowage Assembly. At left is Mission Specialist Stephen Robinson, at right is Mission Specialist Soichi Noguchi, who is with the Japanese Space Agency. They and other crew members are at Kennedy for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/11/2005

Description	KENNEDY SPACE CENTER, FLA. - After looking over some of the hardware in the Space Station Processing Facility, STS-114 crew members answer questions from the media. From right are Mission Specialists Charles Camarda, Wendy Lawrence, Stephen Robinson (with the microphone), Soichi Noguchi (with the Japanese Space Agency) and Andrew Thomas, Pilot James Kelly, and Commander Eileen Collins. They are standing in front of the Multi-Purpose Logistics Module Raffaello that will fly on mission STS-114. The crew is at KSC for Crew Equipment Interface Test (CEIT) activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on-orbit. The Return to Flight mission STS-114 will also carry a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/10/2005

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 Mission Specialists Soichi Noguchi (left) and Stephen Robinson look at tools from the Tool Stowage Assembly. Robinson is holding the External Tank/umbilical door tool (one that is used if, during an EVA, an astronaut would have to manually close the ET Umbilical doors). The crew is at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 Mission Specialists Soichi Noguchi (left) and Stephen Robinson look at tools from the Tool Stowage Assembly. Robinson is holding the External Tank/umbilical door tool (one that is used if, during an EVA, an astronaut would have to manually close the ET Umbilical doors). The crew is at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/11/2005

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 Mission Specialists Soichi Noguchi (left) and Stephen Robinson (second from right) look at a three-dimensional camera that will be used on future missions. Noguchi is with the Japanese Space Agency. They and other crew members are at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 Mission Specialists Soichi Noguchi (left) and Stephen Robinson (second from right) look at a three-dimensional camera that will be used on future missions. Noguchi is with the Japanese Space Agency. They and other crew members are at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/11/2005

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 crew members behind a protective screen practice using handheld cameras as they look into Discovery?s payload bay. At left is Mission Specialist Stephen Robinson, at right are Mission Specialists Andrew Thomas and Soichi Noguchi (with the Japanese Space Agency). They will use the cameras during the mission. Crew members are at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the orbiter and equipment they will be working with on the mission. Return to Flight Mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 crew members behind a protective screen practice using handheld cameras as they look into Discovery?s payload bay. At left is Mission Specialist Stephen Robinson, at right are Mission Specialists Andrew Thomas and Soichi Noguchi (with the Japanese Space Agency). They will use the cameras during the mission. Crew members are at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the orbiter and equipment they will be working with on the mission. Return to Flight Mission STS-114 will carry the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station, and a replacement Control Moment Gyroscope. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/10/2005

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 Mission Specialists Soichi Noguchi (left) and Stephen Robinson (right) practice with a three-dimensional camera that will be used on future missions. Noguchi is with the Japanese Space Agency. They and other crew members are at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 Mission Specialists Soichi Noguchi (left) and Stephen Robinson (right) practice with a three-dimensional camera that will be used on future missions. Noguchi is with the Japanese Space Agency. They and other crew members are at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/11/2005

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 Mission Specialist Soichi Noguchi (right) practices with a three-dimensional camera that will be used on future missions. At left, foreground, Mission Specialist Stephen Robinson watches. Behind Robinson are Mission Specialists Andrew Thomas and Charles Camarda. The crew is at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.

Description	KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-114 Mission Specialist Soichi Noguchi (right) practices with a three-dimensional camera that will be used on future missions. At left, foreground, Mission Specialist Stephen Robinson watches. Behind Robinson are Mission Specialists Andrew Thomas and Charles Camarda. The crew is at KSC for Crew Equipment Interface Test activities. During CEIT, the crew has an opportunity to get a hands-on look at the payloads with which they?ll be working on orbit. The Return to Flight mission STS-114 will carry a replacement Control Moment Gyroscope and the Multi-Purpose Logistics Module Raffaello, filled with supplies for the International Space Station. Launch of STS-114 has a launch window of May 12 to June 3.
Release Date	02/11/2005

KENNEDY SPACE CENTER, FLA. - Members of the Space Shuttle Discovery?s Return to Flight STS-114 crew are conducting a payload Crew Equipment Interface Test (CEIT) in the Space Station Processing Facility at NASA?s Kennedy Space Center, Fla. Seen here looking at tile samples are Mission Specialists Stephen Robinson (left) and Soichi Noguchi (right), who is with the Japanese Aerospace Exploration Agency. The launch window for STS-114 is May 15 to June 3, 2005. During CEIT, the crew is inspecting the resupply stowage racks installed in the Italian-built Multi-Purpose Logistics Module Raffaello and performing tool and equipment interface checks with the Thermal Protection System (TPS) repair sample box, the Control Moment Gyroscope (CMG) and the External Stowage Platform-2 in preparation for the mission?s three scheduled spacewalks. The seven-member crew will fly to the International Space Station primarily to evaluate procedures for flight safety, including Shuttle inspection and repair techniques. The TPS repair sample box contains tile samples for the Detailed Test Objective (DTO) that will enable the crew to test new on-orbit TPS repair techniques. The CMG installed on the Lightweight Multi-Purpose Experiment Support Structure Carrier (LMC) is a replacement for an inoperable CMG on the International Space Station. The CMGs provide altitude control for the outpost keeping it properly oriented toward the Sun without use of rocket fuel. The ESP2 will carry replacement parts, known as orbital replacement units (ORU) to the Station. The platform will be deployed and attached to the Station?s airlock and will be used as a permanent spare parts facility.

Description	KENNEDY SPACE CENTER, FLA. - Members of the Space Shuttle Discovery?s Return to Flight STS-114 crew are conducting a payload Crew Equipment Interface Test (CEIT) in the Space Station Processing Facility at NASA?s Kennedy Space Center, Fla. Seen here looking at tile samples are Mission Specialists Stephen Robinson (left) and Soichi Noguchi (right), who is with the Japanese Aerospace Exploration Agency. The launch window for STS-114 is May 15 to June 3, 2005. During CEIT, the crew is inspecting the resupply stowage racks installed in the Italian-built Multi-Purpose Logistics Module Raffaello and performing tool and equipment interface checks with the Thermal Protection System (TPS) repair sample box, the Control Moment Gyroscope (CMG) and the External Stowage Platform-2 in preparation for the mission?s three scheduled spacewalks. The seven-member crew will fly to the International Space Station primarily to evaluate procedures for flight safety, including Shuttle inspection and repair techniques. The TPS repair sample box contains tile samples for the Detailed Test Objective (DTO) that will enable the crew to test new on-orbit TPS repair techniques. The CMG installed on the Lightweight Multi-Purpose Experiment Support Structure Carrier (LMC) is a replacement for an inoperable CMG on the International Space Station. The CMGs provide altitude control for the outpost keeping it properly oriented toward the Sun without use of rocket fuel. The ESP2 will carry replacement parts, known as orbital replacement units (ORU) to the Station. The platform will be deployed and attached to the Station?s airlock and will be used as a permanent spare parts facility.
Release Date	03/18/2005

Description	KENNEDY SPACE CENTER, FLA. - Members of the Space Shuttle Discovery?s Return to Flight STS-114 crew are conducting a payload Crew Equipment Interface Test (CEIT) in the Space Station Processing Facility at NASA?s Kennedy Space Center, Fla. Seen here are Mission Specialists Stephen Robinson (left) and Andrew Thomas. The launch window for STS-114 is May 15 to June 3, 2005. During CEIT, the crew is inspecting the resupply stowage racks installed in the Italian-built Multi-Purpose Logistics Module Raffaello and performing tool and equipment interface checks with the Thermal Protection System (TPS) repair sample box, the Control Moment Gyroscope (CMG) and the External Stowage Platform-2 in preparation for the mission?s three scheduled spacewalks. The seven-member crew will fly to the International Space Station primarily to evaluate procedures for flight safety, including Shuttle inspection and repair techniques. The TPS repair sample box contains tile samples for the Detailed Test Objective (DTO) that will enable the crew to test new on-orbit TPS repair techniques. The CMG installed on the Lightweight Multi-Purpose Experiment Support Structure Carrier (LMC) is a replacement for an inoperable CMG on the International Space Station. The CMGs provide altitude control for the outpost keeping it properly oriented toward the Sun without use of rocket fuel. The ESP2 will carry replacement parts, known as orbital replacement units (ORU) to the Station. The platform will be deployed and attached to the Station?s airlock and will be used as a permanent spare parts facility.
Release Date	03/18/2005

KENNEDY SPACE CENTER, FLA. - During Crew Equipment Interface Test (CEIT) at SPACEHAB in Cape Canaveral, Fla., STS-114 Mission Specialist Stephen Robinson inspects External Stowage Platform-2 (ESP2). As payload on Space Shuttle Discovery?s Return to Flight mission, the ESP2 will carry replacement parts, known as orbital replacement units (ORU) to the International Space Station. The platform will be deployed and attached to the Station?s airlock and will be used as a permanent spare parts facility. The launch window for STS-114 is May 15 to June 3, 2005. During CEIT in the Space Station Processing Facility, the crew also inspected the resupply stowage racks installed in the Italian-built Multi-Purpose Logistics Module Raffaello and performed tool and equipment interface checks with the Thermal Protection System (TPS) repair sample box, and the Control Moment Gyroscope (CMG) in preparation for the mission?s three scheduled spacewalks. The seven-member crew will fly to the Space Station primarily to evaluate procedures for flight safety, including Shuttle inspection and repair techniques.

Description	KENNEDY SPACE CENTER, FLA. - During Crew Equipment Interface Test (CEIT) at SPACEHAB in Cape Canaveral, Fla., STS-114 Mission Specialist Stephen Robinson inspects External Stowage Platform-2 (ESP2). As payload on Space Shuttle Discovery?s Return to Flight mission, the ESP2 will carry replacement parts, known as orbital replacement units (ORU) to the International Space Station. The platform will be deployed and attached to the Station?s airlock and will be used as a permanent spare parts facility. The launch window for STS-114 is May 15 to June 3, 2005. During CEIT in the Space Station Processing Facility, the crew also inspected the resupply stowage racks installed in the Italian-built Multi-Purpose Logistics Module Raffaello and performed tool and equipment interface checks with the Thermal Protection System (TPS) repair sample box, and the Control Moment Gyroscope (CMG) in preparation for the mission?s three scheduled spacewalks. The seven-member crew will fly to the Space Station primarily to evaluate procedures for flight safety, including Shuttle inspection and repair techniques.
Release Date	03/18/2005

KENNEDY SPACE CENTER, FLA. - During Crew Equipment Interface Test (CEIT) at SPACEHAB in Cape Canaveral, Fla., STS-114 Mission Specialists Stephen Robinson, Soichi Noguchi and Andrew Thomas check out the External Stowage Platform-2 (ESP2). Noguchi is with the Japanese Aerospace Exploration Agency. As payload on Space Shuttle Discovery?s Return to Flight mission, the ESP2 will carry replacement parts, known as orbital replacement units (ORU) to the International Space Station. The platform will be deployed and attached to the Station?s airlock and will be used as a permanent spare parts facility. The launch window for STS-114 is May 15 to June 3, 2005. Earlier, during CEIT in the Space Station Processing Facility, the crew also inspected the resupply stowage racks installed in the Italian-built Multi-Purpose Logistics Module Raffaello and performed tool and equipment interface checks with the Thermal Protection System (TPS) repair sample box, and the Control Moment Gyroscope (CMG) in preparation for the mission?s three scheduled spacewalks. The seven-member crew will fly to the Space Station primarily to evaluate procedures for flight safety, including Shuttle inspection and repair techniques.

Description	KENNEDY SPACE CENTER, FLA. - During Crew Equipment Interface Test (CEIT) at SPACEHAB in Cape Canaveral, Fla., STS-114 Mission Specialists Stephen Robinson, Soichi Noguchi and Andrew Thomas check out the External Stowage Platform-2 (ESP2). Noguchi is with the Japanese Aerospace Exploration Agency. As payload on Space Shuttle Discovery?s Return to Flight mission, the ESP2 will carry replacement parts, known as orbital replacement units (ORU) to the International Space Station. The platform will be deployed and attached to the Station?s airlock and will be used as a permanent spare parts facility. The launch window for STS-114 is May 15 to June 3, 2005. Earlier, during CEIT in the Space Station Processing Facility, the crew also inspected the resupply stowage racks installed in the Italian-built Multi-Purpose Logistics Module Raffaello and performed tool and equipment interface checks with the Thermal Protection System (TPS) repair sample box, and the Control Moment Gyroscope (CMG) in preparation for the mission?s three scheduled spacewalks. The seven-member crew will fly to the Space Station primarily to evaluate procedures for flight safety, including Shuttle inspection and repair techniques.
Release Date	03/18/2005

Description	KENNEDY SPACE CENTER, FLA. - During Crew Equipment Interface Test (CEIT) at SPACEHAB in Cape Canaveral, Fla., STS-114 Mission Specialist Stephen Robinson inspects External Stowage Platform-2 (ESP2). As payload on Space Shuttle Discovery?s Return to Flight mission, the ESP2 will carry replacement parts, known as orbital replacement units (ORU) to the International Space Station. The platform will be deployed and attached to the Station?s airlock and will be used as a permanent spare parts facility. The launch window for STS-114 is May 15 to June 3, 2005. During CEIT in the Space Station Processing Facility, the crew also inspected the resupply stowage racks installed in the Italian-built Multi-Purpose Logistics Module Raffaello and performed tool and equipment interface checks with the Thermal Protection System (TPS) repair sample box, and the Control Moment Gyroscope (CMG) in preparation for the mission?s three scheduled spacewalks. The seven-member crew will fly to the Space Station primarily to evaluate procedures for flight safety, including Shuttle inspection and repair techniques.
Release Date	03/18/2005

KENNEDY SPACE CENTER, FLA. - After arrival at NASA?s Kennedy Space Center, the STS-114 crew members pause on the runway while Commander Eileen Collins makes a brief statement to the media. Standing behind her, from left, are Pilot James Kelly and Mission Specialists Wendy Lawrence, Stephen Robinson, Charles Camarda, and Andrew Thomas. The crew is at KSC to take part in the Terminal Countdown Demonstration Test (TCDT) over the next three days. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - After arrival at NASA?s Kennedy Space Center, the STS-114 crew members pause on the runway while Commander Eileen Collins makes a brief statement to the media. Standing behind her, from left, are Pilot James Kelly and Mission Specialists Wendy Lawrence, Stephen Robinson, Charles Camarda, and Andrew Thomas. The crew is at KSC to take part in the Terminal Countdown Demonstration Test (TCDT) over the next three days. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/01/2005

Description	KENNEDY SPACE CENTER, FLA. - After arrival at NASA?s Kennedy Space Center, the STS-114 crew members pause on the runway while Commander Eileen Collins makes a brief statement to the media. Seen here are Pilot James Kelly and Mission Specialists Wendy Lawrence and Stephen Robinson. The crew is at KSC to take part in the Terminal Countdown Demonstration Test (TCDT) over the next three days. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/01/2005

KENNEDY SPACE CENTER, FLA. - During Terminal Countdown Demonstration Test (TCDT) activities at NASA?s Kennedy Space Center, the STS-114 crew takes part in training on an M-113, an armored personnel carrier that is used for speedy departure from the launch pad in an emergency. Seated in the M-113, left to right, are Commander Eileen Collins, Mission Specialist Stephen Robinson, Capt. George Hoggard, astronaut rescue team leader, Mission Specialists Andrew Thomas, Soichi Noguchi and Charles Camarda, and Pilot James Kelly. Noguchi is with the Japan Aerospace Exploration Agency. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - During Terminal Countdown Demonstration Test (TCDT) activities at NASA?s Kennedy Space Center, the STS-114 crew takes part in training on an M-113, an armored personnel carrier that is used for speedy departure from the launch pad in an emergency. Seated in the M-113, left to right, are Commander Eileen Collins, Mission Specialist Stephen Robinson, Capt. George Hoggard, astronaut rescue team leader, Mission Specialists Andrew Thomas, Soichi Noguchi and Charles Camarda, and Pilot James Kelly. Noguchi is with the Japan Aerospace Exploration Agency. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/02/2005

KENNEDY SPACE CENTER, FLA. - During Terminal Countdown Demonstration Test (TCDT) activities at NASA?s Kennedy Space Center, STS-114 Mission Specialist Stephen Robinson is getting ready to practice driving an M-113, an armored personnel carrier that is used for speedy departure from the launch pad in an emergency. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - During Terminal Countdown Demonstration Test (TCDT) activities at NASA?s Kennedy Space Center, STS-114 Mission Specialist Stephen Robinson is getting ready to practice driving an M-113, an armored personnel carrier that is used for speedy departure from the launch pad in an emergency. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/02/2005

KENNEDY SPACE CENTER, FLA. - Dozens of media are gathered at the slidewire basket landing area on Launch Pad 39B to interview and hear comments from the STS-114 crew: Mission Specialists Andrew Thomas, Wendy Lawrence and Stephen Robinson, Commander Eileen Collins, Mission Specialists Charles Camarda and Soichi Noguchi, and Pilot James Kelly. Noguchi is with the Japan Aerospace Exploration Agency. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is designated the first Return to Flight mission, with a launch window extending from July 13 to July 31.

Description	KENNEDY SPACE CENTER, FLA. - Dozens of media are gathered at the slidewire basket landing area on Launch Pad 39B to interview and hear comments from the STS-114 crew: Mission Specialists Andrew Thomas, Wendy Lawrence and Stephen Robinson, Commander Eileen Collins, Mission Specialists Charles Camarda and Soichi Noguchi, and Pilot James Kelly. Noguchi is with the Japan Aerospace Exploration Agency. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is designated the first Return to Flight mission, with a launch window extending from July 13 to July 31.
Release Date	05/03/2005

Narrow Search

Remove

What

Where

Who

When

Browse All : Images by Stephen Robinson