|
|
STS-109 Shuttle Mission Onbo
…
| Name of Image |
STS-109 Shuttle Mission Onboard Crew Portrait |
| Date of Image |
2002-03-11 |
| Full Description |
On the Space Shuttle Columbia's mid deck, the STS-109 crew of seven pose for the traditional in-flight portrait. From the left (front row), are astronauts Nancy J. Currie, mission specialist, Scott D. Altman, mission commander, and Duane G. Carey, pilot. Pictured on the back row from left to right are astronauts John M. Grunsfield, payload commander, and Richard M. Lirneham, James H. Newman, and Michael J. Massimino, all mission specialists. The 108th flight overall in NASA's Space Shuttle Program, the STS-109 mission launched March 1, 2002, and lasted 10 days, 22 hours, and 11 minutes. The goal of the mission was the maintenance and upgrade of the Hubble Space Telescope (HST). Using Columbia's robotic arm, the telescope was captured and secured on a work stand in Columbia's payload bay where four members of the crew performed five space walks to complete system upgrades to the HST. The Marshall Space Flight Center had the responsibility for the design, development, and construction of the HST, which is the most complex and sensitive optical telescope ever made, to study the cosmos from a low-Earth orbit. |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-69 Shuttle Mission Imagery |
|
| General Description |
STS-88 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
| General Description |
STS-109 Shuttle Mission Imagery |
|
KENNEDY SPACE CENTER, FLA. -
…
| Description |
KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility Bay 1, STS-88 Mission Specialists (left to right) Jerry L. Ross, Sergei Krikalev, a cosmonaut from Russia, and James H. Newman examine equipment that will be on the Space Shuttle Endeavour during their upcoming flight. Launch of Mission STS-88 is targeted for Dec. 3, 1998. The STS-88 crew members are participating in a Crew Equipment Interface Test (CEIT), familiarizing themselves with the orbiter's midbody and crew compartments. Other crew members are Commander Robert D. Cabana, Pilot Frederick W. "Rick" Sturckow and Mission Specialist Nancy J. Currie. STS-88 will be the first Space Shuttle launch for assembly of the International Space Station (ISS). The primary payload is the Unity connecting module which will be mated to the Russian-built Zarya control module, expected to be already on orbit after a November launch from Russia. The first major U.S.-built component of ISS, Unity will serve as a connecting passageway to living and working areas of the space station. Unity has two attached pressurized mating adapters (PMAs) and one stowage rack installed inside. PMA-1 provides the permanent connection point between Unity and Zarya, PMA-2 will serve as a Space Shuttle docking port. Zarya is a self-supporting active vehicle, providing propulsive control capability and power during the early assembly stages. It also has fuel storage capability |
| Release Date |
10/03/1998 |
|
KENNEDY SPACE CENTER, FLA. -
…
| Description |
KENNEDY SPACE CENTER, FLA. -- Inside the Orbiter Processing Facility Bay 1, STS-88 Mission Specialists Sergei Krikalev (left), a Russian cosmonaut, and James H. Newman look over equipment for their upcoming flight. The STS-88 crew members are participating in a Crew Equipment Interface Test (CEIT), familiarizing themselves with the orbiter's midbody and crew compartments. Targeted for liftoff on Dec. 3, 1998, STS-88 will be the first Space Shuttle launch for assembly of the International Space Station (ISS). The primary payload is the Unity connecting module which will be mated to the Russian-built Zarya control module, expected to be already on orbit after a November launch from Russia. The first major U.S.-built component of ISS, Unity will serve as a connecting passageway to living and working areas of the space station. Unity has two attached pressurized mating adapters (PMAs) and one stowage rack installed inside. PMA-1 provides the permanent connection point between Unity and Zarya, PMA-2 will serve as a Space Shuttle docking port. Zarya is a self-supporting active vehicle, providing propulsive control capability and power during the early assembly stages. It also has fuel storage capability |
| Release Date |
10/03/1998 |
|
KENNEDY SPACE CENTER, FLA. -
…
| Description |
KENNEDY SPACE CENTER, FLA. -- As the bucket operator (left) lowers them into the open payload bay of the orbiter Endeavour, STS-88 Mission Specialists Jerry L. Ross (second from left) and James H. Newman (second from right) do a sharp-edge inspection. At their right is Wayne Wedlake, with United Space Alliance at Johnson Space Center. Below them is the Orbiter Docking System, the remote manipulator system arm and a tunnel into the payload bay. The STS-88 crew members are participating in a Crew Equipment Interface Test (CEIT), familiarizing themselves with the orbiter's midbody and crew compartments. Targeted for liftoff on Dec. 3, 1998, STS-88 will be the first Space Shuttle launch for assembly of the International Space Station (ISS). The primary payload is the Unity connecting module which will be mated to the Russian-built Zarya control module, expected to be already on orbit after a November launch from Russia. After the mating, Ross and Newman are scheduled to perform three spacewalks to connect power, data and utility lines and install exterior equipment. The first major U.S.-built component of ISS, Unity will serve as a connecting passageway to living and working areas of the space station. Unity has two attached pressurized mating adapters (PMAs) and one stowage rack installed inside. PMA-1 provides the permanent connection point between Unity and Zarya, PMA-2 will serve as a Space Shuttle docking port. Zarya is a self-supporting active vehicle, providing propulsive control capability and power during the early assembly stages. It also has fuel storage capability |
| Release Date |
10/03/1998 |
|
KENNEDY SPACE CENTER, FLA. -
…
| Description |
KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, STS-88 Mission Specialists Sergei Krikalev (left), a Russian cosmonaut, James H. Newman (center), and Jerry L. Ross conduct a sharp-edge inspection of the Unity connecting module, which is the primary payload on their upcoming mission. The STS-88 crew members are participating in a Crew Equipment Interface Test (CEIT), familiarizing themselves with the orbiter's midbody and crew compartments. Targeted for liftoff on Dec. 3, 1998, STS-88 will be the first Space Shuttle launch for assembly of the International Space Station (ISS). The primary payload is the Unity connecting module which will be mated to the Russian-built Zarya control module, expected to be already on orbit after a November launch from Russia. The first major U.S.-built component of ISS, Unity will serve as a connecting passageway to living and working areas of the space station. Unity has two attached pressurized mating adapters (PMAs) and one stowage rack installed inside. PMA-1 provides the permanent connection point between Unity and Zarya, PMA-2 will serve as a Space Shuttle docking port. Zarya is a self-supporting active vehicle, providing propulsive control capability and power during the early assembly stages. It also has fuel storage capability |
| Release Date |
10/03/1998 |
|
KENNEDY SPACE CENTER, FLA. -
…
| Description |
KENNEDY SPACE CENTER, FLA. -- Inside the payload bay of Space Shuttle orbiter Endeavour, workers and STS-88 crew members on a movable work platform or bucket move closer to the rear of the orbiter's crew compartment. While Endeavour is being prepared for flight inside Orbiter Processing Facility Bay 1, the STS-88 crew members are participating in a Crew Equipment Interface Test (CEIT) to familiarize themselves with the orbiter's midbody and crew compartments. A KSC worker (left) maneuvers the platform to give Mission Specialists Jerry L. Ross and James H. Newman (right) a closer look. Looking on is Wayne Wedlake of United Space Alliance at Johnson Space Center. Targeted for liftoff on Dec. 3, 1998, STS-88 will be the first Space Shuttle launch for assembly of the International Space Station (ISS). The primary payload is the Unity connecting module which will be mated to the Russian-built Zarya control module, expected to be already on orbit after a November launch from Russia. After the mating, Ross and Newman are scheduled to perform three spacewalks to connect power, data and utility lines and install exterior equipment. The first major U.S.-built component of ISS, Unity will serve as a connecting passageway to living and working areas of the space station. Unity has two attached pressurized mating adapters (PMAs) and one stowage rack installed inside. PMA-1 provides the permanent connection point between Unity and Zarya, PMA-2 will serve as a Space Shuttle docking port. Zarya is a self-supporting active vehicle, providing propulsive control capability and power during the early assembly stages. It also has fuel storage capability |
| Release Date |
10/03/1998 |
|
KENNEDY SPACE CENTER, FLA. -
…
| Description |
KENNEDY SPACE CENTER, FLA. -- Inside the payload bay of Space Shuttle orbiter Endeavour in Orbiter Processing Facility Bay 1, STS-88 Mission Specialists Jerry L. Ross (crouching at left) and James H. Newman (far right) get a close look at equipment. Looking on is Wayne Wedlake (far left), with United Space Alliance at Johnson Space Center, and a KSC worker (behind Newman) who is operating the movable work platform or bucket. The STS-88 crew members are participating in a Crew Equipment Interface Test (CEIT), familiarizing themselves with the orbiter's midbody and crew compartments. Targeted for liftoff on Dec. 3, 1998, STS-88 will be the first Space Shuttle launch for assembly of the International Space Station (ISS). The primary payload is the Unity connecting module which will be mated to the Russian-built Zarya control module, expected to be already on orbit after a November launch from Russia. After the mating, Ross and Newman are scheduled to perform three spacewalks to connect power, data and utility lines and install exterior equipment. The first major U.S.-built component of ISS, Unity will serve as a connecting passageway to living and working areas of the space station. Unity has two attached pressurized mating adapters (PMAs) and one stowage rack installed inside. PMA-1 provides the permanent connection point between Unity and Zarya, PMA-2 will serve as a Space Shuttle docking port. Zarya is a self-supporting active vehicle, providing propulsive control capability and power during the early assembly stages. It also has fuel storage capability |
| Release Date |
10/03/1998 |
|
|
