Browse All : Images by Dafydd Williams of Kennedy Space Center (KSC)

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, STS-118 crew members practice using equipment for the mission. At left, on the ladder, is Mission Specialist Scott Parazynski, on the right, looking up, is Mission Specialist Dafydd Williams (Canadian Space Agency). The STS-118 mission will be delivering and installing the third starboard truss segment, the ITS S5, to the International Space Station, and carry a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.

Description	KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, STS-118 crew members practice using equipment for the mission. At left, on the ladder, is Mission Specialist Scott Parazynski, on the right, looking up, is Mission Specialist Dafydd Williams (Canadian Space Agency). The STS-118 mission will be delivering and installing the third starboard truss segment, the ITS S5, to the International Space Station, and carry a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.
Release Date	04/07/2004

KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialist Dafydd Williams (Canadian Space Agency) practices using a tool that is part of equipment for the mission. The crew is taking part in equipment familiarization in the Space Station Processing Facility. The STS-118 mission will be delivering and installing the third starboard truss segment, the ITS S5, to the International Space Station, and carry a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.

Description	KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialist Dafydd Williams (Canadian Space Agency) practices using a tool that is part of equipment for the mission. The crew is taking part in equipment familiarization in the Space Station Processing Facility. The STS-118 mission will be delivering and installing the third starboard truss segment, the ITS S5, to the International Space Station, and carry a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.
Release Date	04/07/2004

KENNEDY SPACE CENTER, FLA. - The STS-118 crew look over parts of the mission payload in the Space Station Processing Facility. The crew comprises Commander Scott Kelly, Pilot Charles Hobaugh, and Mission Specialists Scott Parazynski, Dafydd Williams, Barbara Morgan and Lisa Nowak. Williams is with the Canadian Space Agency. Morgan was selected by NASA in January 1998 as the first Educator Astronaut. The mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, and a SPACEHAB Single Cargo Module with supplies and equipment. Launch aboard Space Shuttle Columbia is scheduled for Nov. 13, 2003.

Description	KENNEDY SPACE CENTER, FLA. - The STS-118 crew look over parts of the mission payload in the Space Station Processing Facility. The crew comprises Commander Scott Kelly, Pilot Charles Hobaugh, and Mission Specialists Scott Parazynski, Dafydd Williams, Barbara Morgan and Lisa Nowak. Williams is with the Canadian Space Agency. Morgan was selected by NASA in January 1998 as the first Educator Astronaut. The mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, and a SPACEHAB Single Cargo Module with supplies and equipment. Launch aboard Space Shuttle Columbia is scheduled for Nov. 13, 2003.
Release Date	01/24/2003

Description	KENNEDY SPACE CENTER, FLA. - The STS-118 crew look over parts of the mission payload in the Space Station Processing Facility. The crew comprises Commander Scott Kelly, Pilot Charles Hobaugh, and Mission Specialists Scott Parazynski, Dafydd Williams, Barbara Morgan and Lisa Nowak. Williams is with the Canadian Space Agency. Morgan was selected by NASA in January 1998 as the first Educator Astronaut. The mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, and a SPACEHAB Single Cargo Module with supplies and equipment. Launch aboard Space Shuttle Columbia is scheduled for Nov. 13, 2003.
Release Date	01/24/2003

KENNEDY SPACE CENTER, FLA. -- Members of the STS-118 crew take part in a hardware review of the SPACEHAB module, part of the payload on their mission. Seen here (in uniforms) from left are Mission Specialists Dafydd Williams and Barbara Morgan and Pilot Charles Hobaugh. Williams represents the Canadian Space Agency. The mission payload also includes the third starboard truss segment (ITS S5), a control moment gyro and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett

Description	KENNEDY SPACE CENTER, FLA. -- Members of the STS-118 crew take part in a hardware review of the SPACEHAB module, part of the payload on their mission. Seen here (in uniforms) from left are Mission Specialists Dafydd Williams and Barbara Morgan and Pilot Charles Hobaugh. Williams represents the Canadian Space Agency. The mission payload also includes the third starboard truss segment (ITS S5), a control moment gyro and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
Release Date	02/02/2007

Description	KENNEDY SPACE CENTER, FLA. -- Members of the STS-118 crew take part in a hardware review of the SPACEHAB module, part of the payload on their mission. Seen here inside the module are Mission Specialists Dafydd Williams (center) and Barbara Morgan. Williams represents the Canadian Space Agency. The mission payload also includes the third starboard truss segment (ITS S5), a control moment gyro and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
Release Date	02/02/2007

KENNEDY SPACE CENTER, FLA. -- Members of the STS-118 crew take part in a hardware review of the SPACEHAB module, part of the payload on their mission. Looking inside one of the stowage compartments are Pilot Charles Hobaugh (holding a light) and Mission Specialists Dafydd Williams and Barbara Morgan. Williams represents the Canadian Space Agency. The mission payload also includes the third starboard truss segment (ITS S5), a control moment gyro and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett

Description	KENNEDY SPACE CENTER, FLA. -- Members of the STS-118 crew take part in a hardware review of the SPACEHAB module, part of the payload on their mission. Looking inside one of the stowage compartments are Pilot Charles Hobaugh (holding a light) and Mission Specialists Dafydd Williams and Barbara Morgan. Williams represents the Canadian Space Agency. The mission payload also includes the third starboard truss segment (ITS S5), a control moment gyro and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
Release Date	02/02/2007

Description	KENNEDY SPACE CENTER, FLA. -- Members of the STS-118 crew take part in a hardware review of the SPACEHAB module, part of the payload on their mission. Seen here inside the module are Mission Specialists Richard Mastracchio (left), Dafydd Williams (center, standing) and Barbara Morgan (lower right). Williams represents the Canadian Space Agency. The mission payload also includes the third starboard truss segment (ITS S5), a control moment gyro and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
Release Date	02/02/2007

Description	KENNEDY SPACE CENTER, FLA. -- Members of the STS-118 crew take part in a hardware review of the SPACEHAB module, part of the payload on their mission. Seen here inside the module are Mission Specialists Dafydd Williams (center) and Barbara Morgan. Williams represents the Canadian Space Agency. The mission payload also includes the third starboard truss segment (ITS S5), a control moment gyro and the external stowage platform 3 (ESP3). STS-118 is targeted to launch June 28 from Launch Pad 39A. Photo credit: NASA/Kim Shiflett
Release Date	02/02/2007

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities at KSC, STS-118 Mission Specialist Dr. Dafydd Williams (right) maneuvers the latch on the crew airlock module. The airlock is located in the middeck. The airlock and airlock hatches permit flight crew members to transfer from the middeck crew compartment into the payload bay for extravehicular activities in their space suits without depressurizing the orbiter crew cabin. The airlock is sized to accommodate two fully suited flight crew members simultaneously. The STS-118 mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, as well as the SPACEHAB single cargo module filled with supplies and equipment. Launch aboard Space Shuttle Endeavour is targeted for Aug. 9. Photo credit: NASA/Kim Shiflett

Description	KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities at KSC, STS-118 Mission Specialist Dr. Dafydd Williams (right) maneuvers the latch on the crew airlock module. The airlock is located in the middeck. The airlock and airlock hatches permit flight crew members to transfer from the middeck crew compartment into the payload bay for extravehicular activities in their space suits without depressurizing the orbiter crew cabin. The airlock is sized to accommodate two fully suited flight crew members simultaneously. The STS-118 mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, as well as the SPACEHAB single cargo module filled with supplies and equipment. Launch aboard Space Shuttle Endeavour is targeted for Aug. 9. Photo credit: NASA/Kim Shiflett
Release Date	05/12/2007

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities at KSC, STS-118 Mission Specialists Tracy Caldwell (center) and Dr. Dafydd Williams (right) look over the interior of the payload bay of orbiter Endeavour. The STS-118 mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, as well as the SPACEHAB single cargo module filled with supplies and equipment. Launch aboard Space Shuttle Endeavour is targeted for Aug. 9. Photo credit: NASA/Kim Shiflett

Description	KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities at KSC, STS-118 Mission Specialists Tracy Caldwell (center) and Dr. Dafydd Williams (right) look over the interior of the payload bay of orbiter Endeavour. The STS-118 mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, as well as the SPACEHAB single cargo module filled with supplies and equipment. Launch aboard Space Shuttle Endeavour is targeted for Aug. 9. Photo credit: NASA/Kim Shiflett
Release Date	05/12/2007

KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities at KSC, STS-118 crew members get a close look at equipment inside Endeavour's payload bay. The crew comprises Commander Scott Kelly, Pilot Charles Hobaugh, and Mission Specialists Dr. Dafydd Williams, Barbara Morgan, Richard Mastracchio, Tracy Caldwell and Benjamin Drew. The STS-118 mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, as well as the SPACEHAB single cargo module filled with supplies and equipment. Launch aboard Space Shuttle Endeavour is targeted for Aug. 9. Photo credit: NASA/Kim Shiflett

Description	KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities at KSC, STS-118 crew members get a close look at equipment inside Endeavour's payload bay. The crew comprises Commander Scott Kelly, Pilot Charles Hobaugh, and Mission Specialists Dr. Dafydd Williams, Barbara Morgan, Richard Mastracchio, Tracy Caldwell and Benjamin Drew. The STS-118 mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, as well as the SPACEHAB single cargo module filled with supplies and equipment. Launch aboard Space Shuttle Endeavour is targeted for Aug. 9. Photo credit: NASA/Kim Shiflett
Release Date	05/12/2007

Description	KENNEDY SPACE CENTER, FLA. -- During crew equipment interface test activities at KSC, STS-118 Mission Specialist Dr. Dafydd Williams (right) maneuvers the latch on the crew airlock module. The airlock is located in the middeck. The airlock and airlock hatches permit flight crew members to transfer from the middeck crew compartment into the payload bay for extravehicular activities in their space suits without depressurizing the orbiter crew cabin. The airlock is sized to accommodate two fully suited flight crew members simultaneously. The STS-118 mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, as well as the SPACEHAB single cargo module filled with supplies and equipment. Launch aboard Space Shuttle Endeavour is targeted for Aug. 9. Photo credit: NASA/Kim Shiflett
Release Date	05/12/2007

KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialists Dafydd Williams (left) and Scott Parazynski (center) practice using equipment during training in the Space Station Processing Facility. He and other crew members are at KSC to become familiar with equipment for their mission. The mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, and a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.

Description	KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialists Dafydd Williams (left) and Scott Parazynski (center) practice using equipment during training in the Space Station Processing Facility. He and other crew members are at KSC to become familiar with equipment for their mission. The mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, and a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.
Release Date	04/22/2003

KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialists Dafydd Williams (left) and Scott Parazynski (center) look at equipment during training in the Space Station Processing Facility. They and other crew members are at KSC to become familiar with equipment for their mission. The mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, and a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.

Description	KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialists Dafydd Williams (left) and Scott Parazynski (center) look at equipment during training in the Space Station Processing Facility. They and other crew members are at KSC to become familiar with equipment for their mission. The mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, and a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.
Release Date	04/22/2003

KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialist Dafydd Williams looks at equipment during training in the Space Station Processing Facility. Williams is with the Canadian Space Agency. He and other crew members are at KSC to become familiar with equipment for their mission. The mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, and a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.

Description	KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialist Dafydd Williams looks at equipment during training in the Space Station Processing Facility. Williams is with the Canadian Space Agency. He and other crew members are at KSC to become familiar with equipment for their mission. The mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, and a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.
Release Date	04/22/2003

KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialists Dafydd Williams (center left) and Scott Parazynski (center right) practice using equipment during training in the Space Station Processing Facility. They and other crew members are at KSC to become familiar with equipment for their mission. The mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, and a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.

Description	KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialists Dafydd Williams (center left) and Scott Parazynski (center right) practice using equipment during training in the Space Station Processing Facility. They and other crew members are at KSC to become familiar with equipment for their mission. The mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, and a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.
Release Date	04/22/2003

KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialist Scott Parazynski practices using equipment during training in the Space Station Processing Facility. At left is Mission Specialist Dafydd Williams, with the Canadian Space Agency. They and other crew members are at KSC to become familiar with equipment for their mission. The mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, and a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.

Description	KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialist Scott Parazynski practices using equipment during training in the Space Station Processing Facility. At left is Mission Specialist Dafydd Williams, with the Canadian Space Agency. They and other crew members are at KSC to become familiar with equipment for their mission. The mission will be delivering the third starboard truss segment, the ITS S5, to the International Space Station, and a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.
Release Date	04/22/2003

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, members of several Space Shuttle mission crews get a close look at the Video Stanchion Support Assembly (VSSA) that will fly on STS-114 (Logistics Flight 1). From left are STS-118 Mission Specialist Barbara Morgan, STS-116 Mission Specialist Christer Fuglesang (European Space Agency), and STS-118 Mission Specialists Scott Parazynski and Dafydd Williams (Canadian Space Agency). The crews are at KSC for equipment familiarization.

Description	KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, members of several Space Shuttle mission crews get a close look at the Video Stanchion Support Assembly (VSSA) that will fly on STS-114 (Logistics Flight 1). From left are STS-118 Mission Specialist Barbara Morgan, STS-116 Mission Specialist Christer Fuglesang (European Space Agency), and STS-118 Mission Specialists Scott Parazynski and Dafydd Williams (Canadian Space Agency). The crews are at KSC for equipment familiarization.
Release Date	04/07/2004

KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialist Scott Parazynski (left) practices using a tool that is part of equipment for the mission to the International Space Station. Below is Mission Specialist Dafydd Williams (Canadian Space Agency). At right is STS-116 Mission Specialist Christer Fuglesang (European Space Agency), also taking part in the equipment familiarization. The STS-118 mission will be delivering and installing the third starboard truss segment, the ITS S5, to the International Space Station, and carry a SPACEHAB Single Cargo Module with supplies and equipment. The STS-116 mission will deliver the third port truss segment, the P5 Truss, to attach to the second port truss segment, the P3/P4 Truss. Launch dates for both missions are under review.

Description	KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialist Scott Parazynski (left) practices using a tool that is part of equipment for the mission to the International Space Station. Below is Mission Specialist Dafydd Williams (Canadian Space Agency). At right is STS-116 Mission Specialist Christer Fuglesang (European Space Agency), also taking part in the equipment familiarization. The STS-118 mission will be delivering and installing the third starboard truss segment, the ITS S5, to the International Space Station, and carry a SPACEHAB Single Cargo Module with supplies and equipment. The STS-116 mission will deliver the third port truss segment, the P5 Truss, to attach to the second port truss segment, the P3/P4 Truss. Launch dates for both missions are under review.
Release Date	04/07/2004

KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialist Dafydd Williams (Canadian Space Agency) tests a tool that is part of equipment for the mission. The crew is taking part in equipment familiarization in the Space Station Processing Facility. The STS-118 mission will be delivering and installing the third starboard truss segment, the ITS S5, to the International Space Station, and carry a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.

Description	KENNEDY SPACE CENTER, FLA. - STS-118 Mission Specialist Dafydd Williams (Canadian Space Agency) tests a tool that is part of equipment for the mission. The crew is taking part in equipment familiarization in the Space Station Processing Facility. The STS-118 mission will be delivering and installing the third starboard truss segment, the ITS S5, to the International Space Station, and carry a SPACEHAB Single Cargo Module with supplies and equipment. Launch date is under review.
Release Date	04/07/2004

KENNEDY SPACE CENTER, FLA. - Members of the STS-116 and STS-118 crews pause during their visit to KSC for a photo. From left are STS-118 Pilot Charles Hobaugh and Mission Specialist Dafydd Williams (Canadian Space Agency), astronaut Peggy Whitson, STS-116 Mission Specialist Christer Fugelsang (European Space Agency), holding the paper figure of ?Flat Stanley,? an education tool, STS-118 Mission Specialists Barbara Morgan and Scott Parazynski, and STS-116 Mission Specialist Robert Curbeam. The crews are taking part in equipment familiarization in the Space Station Processing Facility. The STS-116 mission will deliver the third port truss segment, the P5 Truss, to attach to the second port truss segment, the P3/P4 Truss. The STS-118 mission will be delivering and installing the third starboard truss segment, the ITS S5, to the International Space Station, and carry a SPACEHAB Single Cargo Module with supplies and equipment. Launch dates for both missions are under review.

Description	KENNEDY SPACE CENTER, FLA. - Members of the STS-116 and STS-118 crews pause during their visit to KSC for a photo. From left are STS-118 Pilot Charles Hobaugh and Mission Specialist Dafydd Williams (Canadian Space Agency), astronaut Peggy Whitson, STS-116 Mission Specialist Christer Fugelsang (European Space Agency), holding the paper figure of ?Flat Stanley,? an education tool, STS-118 Mission Specialists Barbara Morgan and Scott Parazynski, and STS-116 Mission Specialist Robert Curbeam. The crews are taking part in equipment familiarization in the Space Station Processing Facility. The STS-116 mission will deliver the third port truss segment, the P5 Truss, to attach to the second port truss segment, the P3/P4 Truss. The STS-118 mission will be delivering and installing the third starboard truss segment, the ITS S5, to the International Space Station, and carry a SPACEHAB Single Cargo Module with supplies and equipment. Launch dates for both missions are under review.
Release Date	04/07/2004

Narrow Search

Remove

What

Where

Who

When

Browse All : Images by Dafydd Williams of Kennedy Space Center (KSC)