Narrow Search
 
 
Advanced Search

Browse All : Images of United States of America and South Dakota from February 11, 2000

Printer Friendly
1-26 of 26
     
     
3-D Perspective Kamchatka Pe …
Title 3-D Perspective Kamchatka Peninsula Russia
Full Description This perspective view shows the western side of the volcanically active Kamchatka Peninsula in eastern Russia. The image was generated using the first data collected during the Shuttle Radar Topography Mission (SRTM). In the foreground is the Sea of Okhotsk. Inland from the coast, vegetated floodplains and low relief hills rise toward snow capped peaks. The topographic effects on snow and vegetation distribution are very clear in this near-horizontal view. Forming the skyline is the Sredinnyy Khrebet, the volcanic mountain range that makes up the spine of the peninsula. High resolution SRTM topographic data will be used by geologists to study how volcanoes form and to understand the hazards posed by future eruptions. This image was generated using topographic data from SRTM and an enhanced true-color image from the Landsat 7 satellite. This image contains about 2,400 meters (7,880 feet) of total relief. The topographic expression was enhanced by adding artificial shading as calculated from the SRTM elevation model. The Landsat data was provided by the United States Geological Survey's Earth Resources Observations Systems (EROS) Data Center, Sioux Falls, South Dakota. SRTM, launched on February 11, 2000, used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. To collect the 3-D SRTM data, engineers added a 60- meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. SRTM collected three dimensional measurements of nearly 80 percent of the Earth's surface. SRTM is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense, and the German and Italian space agencies. Size: 33.3 km (20.6 miles) wide x 136 km (84 miles) coast to skyline. Location: 58.3 deg. North lat., 160 deg. East long. Orientation: Easterly view, 2 degrees down from horizontal. Original Data Resolution: 30 meters (99 feet). Vertical Exaggeration: 3 times.
Date 02/12/2000
NASA Center Jet Propulsion Laboratory
SRTM Anaglyph: Roads versus …
Title SRTM Anaglyph: Roads versus Dikes near Bhuj, India
Description (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise,Washington, DC. Size: 13.8 x 9.6 kilometers ( 8.6 x 5.9 miles) Location: 23.2 deg. North lat., 69.8 deg. East lon. Orientation: North toward the top Image Data: Landsat Panchromatic Band (visible and near infrared) Date Acquired: February 2000 (SRTM), February 9, 2001 (Landsat), These two images are two-dimensional (top) and three-dimensional (bottom)views of the same area, southeast of Bhuj, India. Together they demonstrate how NASA's Shuttle Radar Topography Mission(SRTM) elevation models can be used to help in the interpretation of satellite imagery. The image was acquired by the Landsat 7 satellite. The top view is a standard panchromatic (visible and near infrared) satellite picture. The bottom view is the same scene projected into an anaglyph, based upon SRTM data. Anaglyphs are generated by creating two differing perspectives of a single satellite image, one perspective for each eye. Note that there are several dark lines crossing parts of the image. Some of these lines are roads but some are geologic dikes. Dikes are sheet-like rocks formed when volcanic fluids intrude cracks in older host rocks. The intersections of these "sheets" with the topographic surface appear as linear or curvilinear traces across the terrain. The dikes traverse varied terrains and they intersect each other - much like roads. In the two dimensional view, roads and dikes are confusingly similar in appearance. However, in three dimensions, dikes can be seen to be ridge-forming features and geographically related to other geologic features (left and lower right of image). In contrast, roads generally traverse less rugged terrain and pass through ridge gaps(upper right and left center of image). Thus the added topographic information provided by SRTM greatly helps in the image interpretation. The stereoscopic effect of this anaglyph was created by first draping a Landsat satellite image (taken just two weeks after the earthquake) over preliminary digital elevation data from the Shuttle Radar Topography Mission (SRTM), and then generating two differing perspectives, one for each eye. When viewed through special glasses, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Anaglyph glasses cover the left eye with a red filter and cover the right eye with a blue filter. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter(33-yard) resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center, Sioux Falls, South Dakota. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long
Date 05.24.2001
Perspective View, San Andrea …
PIA02745
Sol (our sun)
C-Band Interferometric Radar …
Title Perspective View, San Andreas Fault
Original Caption Released with Image The prominent linear feature straight down the center of this perspective view is California's famous San Andreas Fault. The image, created with data from NASA's Shuttle Radar Topography Mission (SRTM), will be used by geologists studying fault dynamics and landforms resulting from active tectonics. This segment of the fault lies west of the city of Palmdale, Calif., about 100 kilometers (about 60 miles) northwest of Los Angeles. The fault is the active tectonic boundary between the North American plate on the right, and the Pacific plate on the left. Relative to each other, the Pacific plate is moving away from the viewer and the North American plate is moving toward the viewer along what geologists call a right lateral strike-slip fault. Two large mountain ranges are visible, the San Gabriel Mountains on the left and the Tehachapi Mountains in the upper right. Another fault, the Garlock Fault lies at the base of the Tehachapis, the San Andreas and the Garlock Faults meet in the center distance near the town of Gorman. In the distance, over the Tehachapi Mountains is California's Central Valley. Along the foothills in the right hand part of the image is the Antelope Valley, including the Antelope Valley California Poppy Reserve. The data used to create this image were acquired by SRTM aboard the Space Shuttle Endeavour, launched on February 11, 2000. This type of display adds the important dimension of elevation to the study of land use and environmental processes as observed in satellite images. The perspective view was created by draping a Landsat satellite image over an SRTM elevation model. Topography is exaggerated 1.5 times vertically. The Landsat image was provided by the United States Geological Survey's Earth Resources Observations Systems (EROS) Data Center, Sioux Falls, South Dakota. SRTM uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA)of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: Varies in a perspective view Location: 34.70 deg. North lat., 118.57 deg. West lon. Orientation: Looking Northwest Original Data Resolution: SRTM and Landsat: 30 meters (99 feet) Date Acquired: February 16, 2000 Image: NASA/JPL/NIMA
Anaglyph, Landsat overlay Ho …
PIA02728
Sol (our sun)
C-Band Interferometric Radar …
Title Anaglyph, Landsat overlay Honolulu, Hawaii
Original Caption Released with Image Honolulu, on the island of Oahu, is a large and growing urban area with limited space and water resources. This anaglyph, combining a Landsat image with SRTM topography, shows how the topography controls the urban growth pattern, causes cloud formation, and directs the rainfall runoff pattern. Red/blue glasses are required to see the 3-D effect. Features of interest in this scene include Diamond Head (an extinct volcano on the right side of the image), Waikiki Beach(just left of Diamond Head), the Punchbowl National Cemetary (another extinct volcano, left of center), downtown Honolulu and Honolulu harbor (lower left of center), and offshore reef patterns. The slopes of the Koolau mountain range are seen in the upper half of the image. Clouds commonly hang above ridges and peaks of the Hawaiian Islands, and in this rendition appear draped directly on the mountains. The clouds are actually about 1000 meters (3300 feet) above sea level. High resolution topographic and image data allow ecologists and planners to assess the effects of urban development on the sensitive ecosystems in tropical regions. This anaglyph was generated using topographic data from the Shuttle Radar Topography Mission, combined with a Landsat 7 satellite image collected coincident with the SRTM mission. The topography data are used to create two differing perspectives of a single image, one perspective for each eye. Each point in the image is shifted slightly, depending on its elevation. When viewed through special glasses, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Anaglyph glasses cover the left eye with a red filter and cover the right eye with a blue filter. The United States Geological Survey's Earth Resources Observations Systems (EROS) DataCenter, Sioux Falls, South Dakota, provided the Landsat data. The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging antenna and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) and the German (DLR) and Italian (ASI) space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: 18 by 28 kilometers (11 by 17 miles) Location: 21.3 deg. North lat., 157.9 deg. West lon. Orientation: North toward upper left Original Data Resolution: SRTM, 30 meters (99 feet), Landsat, 15 meters (50 feet) Date Acquired: SRTM, February 18, 2000, Landsat February 12, 2000 Image: NASA/JPL/NIMA
SRTM Anaglyph: Bhuj, India, …
PIA02797
Sol (our sun)
C-Band Interferometric Radar …
Title SRTM Anaglyph: Bhuj, India, Two Weeks After earthquake
Original Caption Released with Image (Landsat), On January 26, 2001, the city of Bhuj suffered the most deadly earthquake in India's history. About 20,000 were killed and more than one million homes were damaged or destroyed. Shortly after the quake, geologists conducted field investigations to inventory and analyze the natural effects of the event. Stereoscopic views, similar to this anaglyph, aided the geologists in locating landforms indicative of long-term (and possibly ongoing)deformation. Soon, elevation data from the Shuttle Radar Topography Mission (SRTM)will be used in the study of a wide variety of natural hazards worldwide. In this image, the city of Bhuj appears as a medium gray area at the scene center, and the city airport is toward the north (top). Vegetation appears very dark. Rugged but low relief hills of previously folded and faulted bedrock appear south (bottom) and northwest(upper-left) of the city. The stereoscopic effect of this anaglyph was created by first draping a Landsat satellite image (taken just two weeks after the earthquake) over preliminary digital elevation data from the SRTM and then generating two differing perspectives, one for each eye. When viewed through special glasses, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Anaglyph glasses cover the left eye with a red filter and cover the right eye with a blue filter. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. The Landsat7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center,Sioux Falls, South Dakota. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission(SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot)mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA)of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: 13.5 x 20.6 kilometers ( 8.4 x 12.8 miles) Location: 23.3 deg. North lat., 69.7 deg. East lon. Orientation: North toward the top Image Data: Landsat Band 3 Date Acquired: February 2000 (SRTM), February 9, 2001
Anaglyph, Lake Palanskoye La …
PIA02744
Sol (our sun)
C-Band Interferometric Radar …
Title Anaglyph, Lake Palanskoye Landslide, Kamchatka Peninsula, Russia
Original Caption Released with Image The Lake Palanskoye in northern Kamchatka was formed when a large landslide disrupted the drainage pattern, forming a natural dam. The area is volcanically and tectonically active and it is likely that the landslide -- which covers about 80 square kilometers (30 square miles) --was triggered by an earthquake sometime in the past 10,000 years. The source area of the landslide is the ridge to the upper left of the lake. The steep topographic scar at the head of the slide and the broad expanse of hummocky landslide debris that covers the valley to the left of the lake are visible in 3D. This anaglyph was generated by first draping a Landsat Thematic Mapper near-infrared image over a topographic map from the Shuttle Radar Topography Mission, then using the topographic data to create two differing perspectives, one for each eye. When viewed through special glasses, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Anaglyph glasses cover the left eye with a red filter and cover the right eye with a blue filter. Landsat satellites have provided visible light and infrared images of the Earth continuously since 1972. SRTM topographic data match the 30 meter(99 foot) spatial resolution of most Landsat images and will provide a valuable complement for studying the historic and growing Landsat data archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center, Sioux Falls, South Dakota. The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface on its 11-day mission. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging antenna, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration(NASA), the National Imagery and Mapping Agency (NIMA) and the German (DLR) and Italian (ASI) space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: 25 by 19 kilometers (16 by 12 miles) Location: 58.8 deg. North lat., 160.8 deg. East lon. Orientation: North toward the top Image Data: Landsat band 4 Original Data Resolution: SRTM and Landsat, 30 meters (99 feet) Date Acquired: February 12, 2000 (SRTM), August 1, 1999 (Landsat) Image: NASA/JPL/NIMA
Perspective View, Landsat Ov …
PIA02768
Sol (our sun)
C-Band Interferometric Radar …
Title Perspective View, Landsat Overlay, Salalah, Oman, Southern Arabian Peninsula
Original Caption Released with Image This perspective view includes the city of Salalah, the second largest city in Oman. The city is located on the broad, generally bright coastal plain and includes areas of green irrigated crops. This view was generated from a Landsat image draped over a preliminary elevation model produced by the Shuttle Radar Topography Mission (SRTM). The edges of the dataset are to the upper right, left, and lower left. The Arabian Sea (lower right) is represented by the blue false-colored area. Vertical exaggeration of topography is 3X. This scene illustrates how topography determines local climate and, in turn, where people live. The Arabian Peninsula is very arid. However, the steep escarpment of the Qara Mountains wrings moisture from the summer monsoons allowing for growth of natural vegetation (green along the mountain fronts and in the canyons), and soil development (dark brown areas), as well as cultural development of the coastal plain. The monsoons also provide moisture for Frankincense trees growing on the desert (north) side of the mountains. In ancient times, incense derived from the sap of the Frankincense tree was the basis for an extremely lucrative trade. Landsat satellites have provided visible light and infrared images of the Earth continuously since 1972. SRTM topographic data match the 30-meter (99-foot)spatial resolution of most Landsat images and provide a valuable complement for studying the historic and growing Landsat data archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center,Sioux Falls, South Dakota. Elevation data used in this image was acquired by SRTM aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar(SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: 45 kilometers (28 miles) across x 178 kilometers (110 miles) distance Location: 17 deg. North lat., 54 deg. East lon. Orientation: North toward upper left Image Data: Landsat bands 1, 2+4, 3 in blue, green, red Date Acquired: February 15, 2000 (SRTM), November 9, 1999 (Landsat) Image: NASA/JPL/NIMA
SRTM Perspective View with L …
PIA02798
Sol (our sun)
C-Band Interferometric Radar …
Title SRTM Perspective View with Landsat Overlay: Bhuj, India
Original Caption Released with Image Acquired: four days in February, 2000 (SRTM), February 9, 2001 (Landsat), This perspective view shows the city of Bhuj, India, in the foreground (gray area). Bhuj and many other nearby towns and cities were almost completely destroyed by the shaking of an earthquake in western India on January 26, 2001. This magnitude 7.6 earthquake was the deadliest in the history of India with some 20,000 fatalities and over a million homes damaged or destroyed. The epicenter of the earthquake was in the area in the background of this view. Bhuj was the historical capital of the Kachchh region, and the Bhuj airport is the prominent dark line with light borders to the left of the center of the image. Highways and rivers appear as dark lines. Vegetation appears bright green in this false-color Landsat image. The Gulf of Kachchh (or Kutch) is the dark blue area in the upper right corner of the image. The hills reach up to 500 meters (1,500 feet) elevation. The light blue area in the background center of the image is low-lying salt flats called the Rann of Kachchh. This three-dimensional perspective view was generated using topographic data from the Shuttle Radar Topography Mission (SRTM). This image was generated using topographic data from SRTM and an enhanced false-color Landsat 7 satellite image Colors are from Landsat bands 5, 4, and 2 as red, green and blue, respectively. Topographic expression is exaggerated 5X. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. The Landsat7 Thematic Mapper image used here was provided to the SRTM by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center, Sioux Falls, South Dakota. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission(SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot)mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA)of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: scale varies in this perspective image Location: 23.4 deg. North lat., 69.7 deg. East lon. Orientation: looking northeast Image Data: Landsat Bands 5, 4, 3 as red, green, blue respectively Original Data Resolution: SRTM 30 meters (99 feet) Date
SRTM Stereo Pair: Bhuj, Indi …
PIA02796
Sol (our sun)
C-Band Interferometric Radar …
Title SRTM Stereo Pair: Bhuj, India, Two Weeks After earthquake
Original Caption Released with Image Landsat Bands 1, 2+4, 3 as blue, green, red, respectively Date Acquired: February 2000 (SRTM), February 9, 2001 (Landsat), On January 26, 2001, the city of Bhuj suffered the most deadly earthquake in India's history. About 20,000 people were killed, and more than one million homes were damaged or destroyed. Shortly after the quake, geologists conducted field investigations to inventory and analyze the natural effects of the event. Stereoscopic views, similar to this image, aided the geologists in locating landforms indicative of long-term (and possibly ongoing) deformation. Soon, elevation data from the Shuttle Radar Topography Mission (SRTM) will be used in the study of a wide variety of natural hazards worldwide. In this image, the city of Bhuj appears as a gray area at the scene center, and the city airport is toward the north (top). Vegetation appears green. Rugged but low relief hills of previously folded and faulted bedrock appear south (bottom) and northwest (upper-left) of the city. This stereoscopic image was generated by draping a Landsat satellite image (taken just two weeks after the earthquake) over a preliminary SRTM elevation model. Two differing perspectives were then calculated, one for each eye. They can be seen in 3-D by viewing the left image with the right eye and the right image with the left eye (cross-eyed viewing) or by downloading and printing the image pair and viewing them with a stereoscope. When stereoscopically merged, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center, Sioux Falls, South Dakota. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar(SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: 13.5 x 20.6 kilometers ( 8.4 x 12.8 miles) Location: 23.3 deg. North lat., 69.7 deg. East lon. Orientation: North toward the top Image Data:
SRTM Anaglyph with Landsat O …
PIA02781
Sol (our sun)
C-Band Interferometric Radar …
Title SRTM Anaglyph with Landsat Overlay: Miquelon and Saint Pierre Islands
Original Caption Released with Image This anaglyph satellite image shows Miquelon and Saint Pierre Islands, located south of Newfoundland, Canada. These islands are a self-governing territory of France. A "tombolo" (sand bar) unites Grande Miquelon to the north and Petite Miquelon to the south. Saint Pierre Island, located to the lower right, includes a harbor, an airport, and a small town. Glaciers once covered these islands and the direction of glacial flow is evident in the topography as striations and shoreline trends running from the upper right to the lower left. The darkest image features are freshwater lakes that fill glacially carved depressions and saltwater lagoons that are bordered by barrier beaches. The lakes and the lagoons are fairly calm waters and reflect less sunlight than do the wave covered and sediment laden nearshore ocean currents. The stereoscopic effect was created by first draping a Landsat satellite image over preliminary digital elevation data from the Shuttle Radar Topography Mission (SRTM), and then generating two differing perspectives, one for each eye. When viewed through special glasses, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Anaglyph glasses cover the left eye with a red filter and cover the right eye with a blue filter. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) DataCenter, Sioux Falls, South Dakota. The elevation data used in this image was acquired by SRTM aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's land surface. To collect the 3-D SRTM data, engineers added a mast 60-meters (about 200-feet)long, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington DC. Size: 48 by 38 kilometers (30 by 24 miles) Location: 47 deg. North lat., 56.3 deg. West lon. Orientation: North toward the upper left Image Data: Landsat bands 2 and 4 averaged Date Acquired: February 12, 2000 (SRTM), September 1, 1999 (Landsat) Image: NASA/JPL/NIMA
Perspective view, Landsat ov …
PIA02727
Sol (our sun)
C-Band Interferometric Radar …
Title Perspective view, Landsat overlay Oahu, Hawaii
Original Caption Released with Image Honolulu, on the island of Oahu, is a large and growing urban area with limited space and water resources. This perspective view, combining a Landsat image with SRTM topography, shows how the topography controls the urban growth pattern, causes cloud formation, and directs the rainfall runoff pattern. Features of interest in this scene include downtown Honolulu (right), Honolulu Harbor (right), Pearl Harbor (center), and offshore reef patterns (foreground). The Koolau mountain range runs through the center of the image. On the north shore of the island are the Mokapu Peninsula and Kaneohe Bay (upper right). Clouds commonly hang above ridges and peaks of the Hawaiian Islands, and in this rendition appear draped directly on the mountains. The clouds are actually about 1000 meters (3300 feet) above sea level. High resolution topographic and image data allow ecologists and planners to assess the effects of urban development on the sensitive ecosystems in tropical regions. This type of display adds the important dimension of elevation to the study of land use and environmental processes as observed in satellite images. The perspective view was created by draping a Landsat 7 satellite image over an SRTM elevation model. Topography is exaggerated about six times vertically. The Landsat 7 image was acquired on February 12, 2000, and was provided by the United States Geological Survey's Earth Resources Observations Systems (EROS)Data Center, Sioux Falls, South Dakota. The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging antenna and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) and the German (DLR) and Italian (ASI) space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: 28 by 56 kilometers (17 by 35 miles) Location: 21.4 deg. North lat., 157.8 deg. West lon. Orientation: Looking North Original Data Resolution: SRTM, 30 meters (99 feet), Landsat, 15 meters (50 feet) Date Acquired: SRTM, February 18, 2000, Landsat February 12, 2000 Image: NASA/JPL/NIMA
SRTM Stereo Pair with Landsa …
PIA02782
Sol (our sun)
C-Band Interferometric Radar …
Title SRTM Stereo Pair with Landsat Overlay: Miquelon and Saint Pierre Islands
Original Caption Released with Image 12, 2000 (SRTM), September 1, 1999 (Landsat) Image: NASA/JPL/NIMA, This stereoscopic satellite image shows Miquelon and Saint Pierre Islands, located south of Newfoundland, Canada. These islands are a self-governing territory of France. A "tombolo" (sand bar) unites Grande Miquelon to the north and Petite Miquelon to the south. Saint Pierre Island, located to the lower right, includes a harbor, an airport, and a small town. Glaciers once covered these islands and the direction of glacial flow is evident in the topography as striations and shoreline trends running from the upper right to the lower left. The darkest image features are freshwater lakes that fill glacially carved depressions and saltwater lagoons that are bordered by barrier beaches. The lakes and the lagoons are fairly calm waters and reflect less sunlight than do the wave covered and sediment laden nearshore ocean currents. This stereoscopic image was generated by draping a Landsat satellite image over a preliminary Shuttle Radar Topography Mission (SRTM)elevation model. Two differing perspectives were then calculated, one for each eye. They can be seen in 3-D by viewing the left image with the right eye and the right image with the left eye (cross-eyed viewing), or by downloading and printing the image pair and viewing them with a stereoscope. When stereoscopically merged, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) DataCenter, Sioux Falls, South Dakota. The elevation data used in this image was acquired by SRTM aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's land surface. To collect the 3-D SRTM data, engineers added a mast 60-meters (about 200-feet)long, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington DC. Size: 48 by 38 kilometers (30 by 24 miles) Location: 47 deg. North lat., 56.3 deg. West lon. Orientation: North toward the upper left Image Data: Landsat bands 1, 2+4, 3 in blue, green, red, respectively Date Acquired: February
Anaglyph, Landsat overlay, S …
PIA02736
Sol (our sun)
C-Band Interferometric Radar …
Title Anaglyph, Landsat overlay, Southernmost Coastal Oman
Original Caption Released with Image This 3-D view of a coastal area in southernmost Oman shows how topographic information can be used to enhance satellite images, deriving a better understanding of the processes that sculpt the landscape. The coastline in the upper half of the image appears to follow the same trend as a canyon in the lower half of the image. Both features are probably coincident with a single fault that cuts the limestone bedrock. Note how in this climate limestone erodes sharply along the stream courses resulting in deep and narrow canyons. Generally the landscape is barren, but the darker areas have sparse vegetation that is supported by summer monsoon moisture. The Arabian Sea is on the right. This anaglyph was generated by first draping a Landsat Thematic Mapper image over a topographic map from the Shuttle Radar Topography Mission, then using the topographic data to create two differing perspectives, one for each eye. When viewed through special glasses, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Anaglyph glasses cover the left eye with a red filter and cover the right eye with a blue filter. Landsat satellites have provided visible light and infrared images of the Earth continuously since 1972. SRTM topographic data match the 30 meter (100 foot) spatial resolution of most Landsat images and will provide a valuable complement for studying the historic and growing Landsat data archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center, Sioux Falls, South Dakota. The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging antenna and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) and the German (DLR) and Italian (ASI)space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: 20.5 by 18.3 kilometers (12.7 by 11.3 miles) Location: 16.9 deg. North lat., 53.7 deg. East lon. Orientation: North at top-left Date Acquired: February 15, 2000 Image: NASA/JPL/NIMA
3-D Perspective View, Kamcha …
PIA02740
Sol (our sun)
C-Band Interferometric Radar …
Title 3-D Perspective View, Kamchatka Peninsula, Russia
Original Caption Released with Image This perspective view shows the western side of the volcanically active Kamchatka Peninsula in eastern Russia. The image was generated using the first data collected during the Shuttle Radar Topography Mission (SRTM). In the foreground is the Sea of Okhotsk. Inland from the coast, vegetated floodplains and low relief hills rise toward snow capped peaks. The topographic effects on snow and vegetation distribution are very clear in this near-horizontal view. Forming the skyline is the Sredinnyy Khrebet, the volcanic mountain range that makes up the spine of the peninsula. High resolution SRTM topographic data will be used by geologists to study how volcanoes form and to understand the hazards posed by future eruptions. This image was generated using topographic data from SRTM and an enhanced true-color image from the Landsat 7 satellite. This image contains about 2,400 meters (7,880 feet) of total relief. The topographic expression was enhanced by adding artificial shading as calculated from the SRTM elevation model. The Landsat data was provided by the United States Geological Survey's Earth Resources Observations Systems (EROS) Data Center, Sioux Falls, South Dakota. SRTM, launched on February 11, 2000, used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar(SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. To collect the 3-D SRTM data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. SRTM collected three-dimensional measurements of nearly 80 percent of the Earth's surface. SRTM is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense, and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, D.C. Size: 33.3 km (20.6 miles) wide x 136 km (84 miles) coast to skyline Location: 58.3 deg. North lat., 160 deg. East long. Orientation: Easterly view, 2 degrees down from horizontal Original Data Resolution: 30 meters (99 feet) Vertical Exaggeration: 3 times Date Acquired: February 12, 2000 (SRTM) August 1, 1999 (Landsat) Image: NASA/JPL/NIMA
Stereo Pair, Pasadena, Calif …
PIA02737
Sol (our sun)
C-Band Interferometric Radar …
Title Stereo Pair, Pasadena, California
Original Caption Released with Image This stereoscopic image pair is a perspective view that shows the western part of the city of Pasadena, California, looking north toward the San Gabriel Mountains. Portions of the cities of Altadena and La Canada Flintridge are also shown. The cluster of large buildings left of center, at the base of the mountains, is the Jet Propulsion Laboratory. This image shows the power of combining data from different sources to create planning tools to study problems that affect large urban areas. In addition to the well-known earthquake hazards, Southern California is affected by a natural cycle of fire and mudflows. Data shown in this image can be used to predict both how wildfires spread over the terrain and how mudflows are channeled down the canyons. The image was created from three datasets: the Shuttle Radar Topography Mission (SRTM) supplied the elevation, U. S. Geological Survey digital aerial photography provided the image detail, and the Landsat Thematic Mapper provided the color. The United States Geological Survey's Earth Resources Observations Systems (EROS) Data Center, Sioux Falls, South Dakota, provided the Landsat data and the aerial photography. The image can be viewed in 3-D by viewing the left image with the right eye and the right image with the left eye (cross-eyed viewing), or by downloading and printing the image pair, and viewing them with a stereoscope. The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging antenna and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) and the German (DLR) and Italian (ASI)space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: 3.4 km (2.1 miles) width x 7.0 km (4.4 miles) depth Location: 34.16 deg. North lat., 118.16 deg. West lon. Orientation: Looking North Original Data Resolution: SRTM and Landsat, 30 m, aerial photo, 3 m, no vertical exaggeration Date Acquired: February 16, 2000 (SRTM), July 3, 1985 (Landsat) Image: NASA/JPL/NIMA
Stereo Pair, Lake Palanskoye …
PIA02743
Sol (our sun)
C-Band Interferometric Radar …
Title Stereo Pair, Lake Palanskoye Landslide, Kamchatka Peninsula, Russia
Original Caption Released with Image The Lake Palanskoye in northern Kamchatka was formed when a large landslide disrupted the drainage pattern, forming a natural dam. The area is volcanically and tectonically active and it is likely that the landslide -- which covers about 80 square kilometers (30 square miles) --was triggered by an earthquake sometime in the past 10,000 years. The source area of the landslide is the ridge between the two bright rocky features to the lower left of the lake. In 3-D, the steep topographic scar at the head of the slide and the broad expanse of hummocky landslide debris that covers the valley just below the lake are visible. This Landsat/SRTM stereoscopic view is an enhanced true color image: Vegetation appears green, rocks are brownish, snow is white and water (such as the lake) appears very dark. This stereoscopic image pair was generated using topographic data from SRTM combined with a Landsat 7 satellite image collected the previous summer. The topography data were used to create two differing perspectives of a single image -- one for each eye. Depending on its elevation, each point in the image was shifted slightly. When stereoscopically merged, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Landsat satellites have provided visible light and infrared images of the Earth continuously since 1972. SRTM topographic data match the 30 meter(99 foot) spatial resolution of most Landsat images and will provide a valuable complement for studying the historic and growing Landsat data archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center, Sioux Falls, South Dakota. The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface on its 11-day mission. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging antenna, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) and the German (DLR) and Italian (ASI) space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: 48 by 20 kilometers (30 by 12 miles) Location: 58.8 deg. North lat., 160.8 deg. East lon. Orientation: North toward the left Image Data: Landsat bands 1, 2, and 3 shown in blue, green and red Original Data Resolution: SRTM and Landsat, 30 meters (99 feet) Date Acquired: February 12, 2000 (SRTM), August 1, 1999 (Landsat) Image: NASA/JPL/NIMA
Stereo Pair, Honolulu, Oahu
PIA02738
Sol (our sun)
C-Band Interferometric Radar …
Title Stereo Pair, Honolulu, Oahu
Original Caption Released with Image Honolulu, on the island of Oahu, is a large and growing urban area. This stereoscopic image pair, combining a Landsat image with topography measured by the Shuttle Radar Topography Mission (SRTM), shows how topography controls the urban pattern. This color image can be viewed in 3-D by viewing the left image with the right eye and the right image with the left eye (cross-eyed viewing), or by downloading and printing the image pair, and viewing them with a stereoscope. Features of interest in this scene include Diamond Head (an extinct volcano near the bottom of the image), Waikiki Beach (just above Diamond Head), the Punchbowl National Cemetary (another extinct volcano, near the image center), downtown Honolulu and Honolulu harbor (image left-center), and offshore reef patterns. The slopes of the Koolau mountain range are seen in the right half of the image. Clouds commonly hang above ridges and peaks of the Hawaiian Islands, but in this synthesized stereo rendition appear draped directly on the mountains. The clouds are actually about 1000 meters (3300 feet) above sea level. This stereoscopic image pair was generated using topographic data from the Shuttle Radar Topography Mission, combined with a Landsat 7 Thematic Mapper image collected at the same time as the SRTM flight. The topography data were used to create two differing perspectives, one for each eye. When stereoscopically merged, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. The United States Geological Survey's Earth Resources Observations Systems (EROS) Data Center, Sioux Falls, South Dakota, provided the Landsat data. The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging antenna and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) and the German (DLR) and Italian (ASI)space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: 11 by 20 kilometers (7 by 13 miles) Location: 21.3 deg. North lat., 157.9 deg. West lon. Orientation: North toward upper right Original Data Resolution: SRTM, 30 meters (99 feet), Landsat, 15 meters (50 feet) Date Acquired: SRTM, February 18, 2000, Landsat February 12, 2000 Image: NASA/JPL/NIMA
SRTM Anaglyph: Roads versus …
PIA03307
Sol (our sun)
C-Band Interferometric Radar …
Title SRTM Anaglyph: Roads versus Dikes near Bhuj, India
Original Caption Released with Image (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise,Washington, DC. Size: 13.8 x 9.6 kilometers ( 8.6 x 5.9 miles) Location: 23.2 deg. North lat., 69.8 deg. East lon. Orientation: North toward the top Image Data: Landsat Panchromatic Band (visible and near infrared) Date Acquired: February 2000 (SRTM), February 9, 2001 (Landsat), These two images are two-dimensional (top) and three-dimensional (bottom)views of the same area, southeast of Bhuj, India. Together they demonstrate how NASA's Shuttle Radar Topography Mission(SRTM) elevation models can be used to help in the interpretation of satellite imagery. The image was acquired by the Landsat 7 satellite. The top view is a standard panchromatic (visible and near infrared) satellite picture. The bottom view is the same scene projected into an anaglyph, based upon SRTM data. Anaglyphs are generated by creating two differing perspectives of a single satellite image, one perspective for each eye. Note that there are several dark lines crossing parts of the image. Some of these lines are roads but some are geologic dikes. Dikes are sheet-like rocks formed when volcanic fluids intrude cracks in older host rocks. The intersections of these "sheets" with the topographic surface appear as linear or curvilinear traces across the terrain. The dikes traverse varied terrains and they intersect each other - much like roads. In the two dimensional view, roads and dikes are confusingly similar in appearance. However, in three dimensions, dikes can be seen to be ridge-forming features and geographically related to other geologic features (left and lower right of image). In contrast, roads generally traverse less rugged terrain and pass through ridge gaps(upper right and left center of image). Thus the added topographic information provided by SRTM greatly helps in the image interpretation. The stereoscopic effect of this anaglyph was created by first draping a Landsat satellite image (taken just two weeks after the earthquake) over preliminary digital elevation data from the Shuttle Radar Topography Mission (SRTM), and then generating two differing perspectives, one for each eye. When viewed through special glasses, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Anaglyph glasses cover the left eye with a red filter and cover the right eye with a blue filter. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter(33-yard) resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center, Sioux Falls, South Dakota. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long
SRTM Stereo Pair: Northwest …
PIA03308
Sol (our sun)
C-Band Interferometric Radar …
Title SRTM Stereo Pair: Northwest of Bhuj, India
Original Caption Released with Image On January 26, 2001, the Kachchh region in western India suffered the most deadly earthquake in India's history. Shortly thereafter, geologists traversed the region looking for ground surface disruptions, such as fault breaks, that could provide clues to the tectonic processes here. Shuttle Radar Topography Mission (SRTM) scientists provided stereoscopic images to the geologists, similar to this 3-D view of the terrain northwest of the city of Bhuj. The geologists reported back that the images were essential in optimizing their field activities. Tectonic landforms are created by ground displacements that are repetitious over geologic time, so these landforms are good places to look for co-seismic faulting and warping. The stereoscopic images showed the geologists where the structures are located and their overall pattern, which could not be seen while standing on anyone hill or in any one gully. In general, the field studies found that surface disruptions by the recent earthquake were minimal and that the major landforms are quite old and probably not directly related to ongoing tectonic processes. Features of interest in the view shown here include the largest hill (upper left-center), which is a dome or anticline, upwardly convex layered rocks. Also visible are a possible volcanic plug (lower left-center) and an incised meandering stream (center). Agriculture in this arid region is concentrated on the alluvial fan of the major stream (green pattern, upper right). This stereoscopic image was generated by draping a Landsat satellite image(taken just two weeks after the earthquake) over a preliminary SRTM elevation model. Two differing perspectives were then calculated, one for each eye. They can be seen in 3-D by viewing the left image with the right eye and the right image with the left eye (cross-eyed viewing or by downloading and printing the image pair and viewing them with a stereoscope. When stereoscopically merged, the result is a vertically exaggerated view of Earth's surface in its full three dimensions. Landsat has been providing visible and infrared views of Earth since 1972. SRTM elevation data matches the 30-meter (33-yard) resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center, Sioux Falls, South Dakota. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission aboard Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed, additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA)of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: 21.3 x 11.9 kilometers ( 13.2 x 7.4 miles) Location: 23.4 deg. North lat., 69.6 deg. East lon. Orientation: North toward the top Image Data: Landsat Bands 1, 2+4, 3 as blue, green, red, respectively Date Acquired: February 2000 (SRTM), February 9, 2001 (Landsat)
General Description STS-99 Shuttle Mission Imagery
General Description STS-99 Shuttle Mission Imagery
General Description STS-99 Shuttle Mission Imagery
General Description STS-99 Shuttle Mission Imagery
General Description STS-99 Shuttle Mission Imagery
General Description STS-99 Shuttle Mission Imagery
General Description STS-99 Shuttle Mission Imagery
1-26 of 26