|
|
Neon Saturn
| Description |
Neon Saturn |
| Full Description |
Flying over the unlit side of Saturn's rings, the Cassini spacecraft captures Saturn's glow, represented in brilliant shades of electric blue, sapphire and mint green, while the planet's shadow casts a wide net on the rings. This striking false-color mosaic was created from 25 images taken by Cassini's visual and infrared mapping spectrometer over a period of 13 hours, and captures Saturn in nighttime and daytime conditions. The visual and infrared mapping spectrometer acquires data simultaneously at 352 different wavelengths, or spectral channels. Data at wavelengths of 2.3, 3.0 and 5.1 microns were combined in the blue, green and red channels of a standard color image, respectively, to make this false-color mosaic. This image was acquired on Feb. 24, 2007, while the spacecraft was 1.58 million kilometers (1 million miles) from the planet and 34.6 degrees above the ring plane. The solar phase angle was 69.5 degrees. In this view, Cassini was looking down on the northern, unlit side of the rings, which are rendered visible by sunlight filtering through from the sunlit, southern face. On the night side (right side of image), with no sunlight, Saturn's own thermal radiation lights things up. This light at 5.1 microns wavelength (some seven times the longest wavelength visible to the human eye) is generated deep within Saturn, and works its way upward, eventually escaping into space. Thick clouds deep in the atmosphere block that light. An amazing array of dark streaks, spots, and globe-encircling bands is visible instead. Saturn's strong thermal glow at 5.1 microns even allows these deep clouds to be seen on portions of the dayside (left side), especially where overlying hazes are thin and the glint of the sun off of them is minimal. These deep clouds are likely made of ammonium hydrosulfide and cannot be seen in reflected light on the dayside, since the glint of the sun on overlying hazes and ammonia clouds blocks the view of this level. A pronounced difference in the brightness between the northern and southern hemispheres is apparent. The northern hemisphere is about twice as bright as the southern hemisphere. This is because high-level, fine particles are about half as prevalent in the northern hemisphere as in the south. These particles block Saturn's glow more strongly, making Saturn look brighter in the north. At 2.3 microns (shown in blue), the icy ring particles are highly reflecting, while methane gas in Saturn's atmosphere strongly absorbs sunlight and renders the planet very dark. At 3.0 microns (shown in green), the situation is reversed: water ice in the rings is strongly absorbing, while the planet's sunlit hemisphere is bright. Thus the rings appear blue in this representation, while the sunlit side of Saturn is greenish-yellow in color. Within the rings, the most opaque parts appear dark, while the more translucent regions are brighter. In particular, the opaque, normally-bright B ring appears here as a broad, dark band, separating the brighter A (outer) and C (inner) rings. At 5.1 microns (shown in red), reflected sunlight is weak and thus light from the planet is dominated by thermal (i.e., heat) radiation that wells up from the planet's deep atmosphere. This thermal emission dominates Saturn's dark side as well as the north polar region (where the hexagon is again visible) and the shadow cast by the A and B rings. Variable amounts of clouds in the planet's upper atmosphere block the thermal radiation, leading to a speckled and banded appearance, which is ever-shifting due to the planet's strong winds. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter was designed, developed and assembled at JPL. The Visual and Infrared Mapping Spectrometer team is based at the University of Arizona, where this image was produced. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov/home/index.cfm. The visual and infrared mapping spectrometer team homepage is at http://wwwvims.lpl.arizona.edu. *Credit:* NASA/JPL/University of Arizona |
| Date |
May 31, 2007 |
|
Cat's eye rings and peek-a-b
| Description |
On Aug. 16, 2006, as the Cassini orbiter flew directly between the sun and Saturn, its Visual and Infrared Mapping Spectrometer captured a sequence of images that vividly show this opposition brightening. |
| Full Description |
Astronomers have long known that Saturn's rings reflect sunlight most strongly when Earth is located directly between Saturn and the sun. Flat, shiny surfaces (like a mirror or a pond) can appear particularly bright when light reflects off them in a certain direction. Scientists call this "specular reflection," from the Latin word for mirror. However, even rough surfaces, like those of Earth's moon or Saturn's rings, can appear bright when the source of light is directly behind the observer's head, no matter what the orientation of the surface is. This latter phenomenon is known as the "opposition effect." Spectacular examples include the eyes of a cat, which seem to glow brightly when they are illuminated by a flashlight, or highway signs and reflectors that "light up" when they are caught in a car's headlights. On Aug. 16, 2006, as the Cassini orbiter flew directly between the sun and Saturn, its Visual and Infrared Mapping Spectrometer captured a sequence of images that vividly show this opposition brightening. Combined here into a mosaic, the images show -- from left to right -- a small, bright spot moving from the outermost B ring across the Cassini Division and all the way across the A ring. In each image, this spot is centered on the point in the rings directly opposite the sun. Theoretical models for the opposition effect suggest that it can be explained by light being scattered several times within the surfaces of individual, transparent, icy ring particles on scales of about 40 micrometers, or 1/500th of an inch. Similar effects are seen in laboratory studies of bright, finely-textured material such as snow or sugar crystals. In this mosaic, blue colors highlight the icy rings (2.35 microns), green represents sunlight reflected by the clouds of Saturn (2.86 microns) and red depicts thermal emission from the planet's interior (5.02 microns). The rings were observed while they were in front of the planet, producing a complex interplay of sunlight reflected from the rings and the shadows cast by the rings on the cloud tops of Saturn. The yellow-green sunlit clouds of Saturn are seen in the upper right corner of the mosaic beyond the outer edge of the A ring, and also through the 4,000-kilometer-wide (2,400 mile) Cassini Division in the left third of the mosaic. (Yellow indicates a mixture of reflected sunlight and thermal emission.) The shadowed regions of the planet, on the other hand, appear deep red because only thermal emission produced deep inside Saturn itself is visible. At exact opposition, the shadows of the rings are hidden behind the rings themselves, but away from this point shadows can be seen peeking out from behind the edges of the A and B rings into the Cassini Division, as well as beyond the outer edge of the A ring. If one looks closely, one can even trace the A ring's shadow behind the partly transparent A ring, as a faint purple band. Within this band, a thin blue-green line crossing obliquely behind the A ring is, caused by sunlight passing through the narrow Encke Gap in the outer A ring. The Cassini spacecraft was at a distance of 254,000 kilometers (157,800 miles) from the center of Saturn when these images were taken, while the opening angle of the rings to the sun was 16.3 degrees. The image scale at the rings is approximately 70 kilometers (40 miles) per pixel. All nine images were taken over a period of 27 minutes, and the vertical dimension of the mosaic is 1.8 degrees. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter was designed, developed and assembled at JPL. The Visual and Infrared Mapping Spectrometer team is based at the University of Arizona, where this image was produced. For more information about the Cassini-Huygens mission, visit: http://saturn.jpl.nasa.gov/home/index.cfm. The visual and infrared mapping spectrometer team home page is at: http://wwwvims.lpl.arizona.edu . Credit: NASA/JPL/University of Arizona |
| Date |
June 26, 2007 |
|
Cat's eye rings and peek-a-b
| Description |
On Aug. 16, 2006, as the Cassini orbiter flew directly between the sun and Saturn, its Visual and Infrared Mapping Spectrometer captured a sequence of images that vividly show this opposition brightening. |
| Full Description |
See also the non-annotated version. Astronomers have long known that Saturn's rings reflect sunlight most strongly when Earth is located directly between Saturn and the sun. Flat, shiny surfaces (like a mirror or a pond) can appear particularly bright when light reflects off them in a certain direction. Scientists call this "specular reflection," from the Latin word for mirror. However, even rough surfaces, like those of Earth's moon or Saturn's rings, can appear bright when the source of light is directly behind the observer's head, no matter what the orientation of the surface is. This latter phenomenon is known as the "opposition effect." Spectacular examples include the eyes of a cat, which seem to glow brightly when they are illuminated by a flashlight, or highway signs and reflectors that "light up" when they are caught in a car's headlights. On Aug. 16, 2006, as the Cassini orbiter flew directly between the sun and Saturn, its Visual and Infrared Mapping Spectrometer captured a sequence of images that vividly show this opposition brightening. Combined here into a mosaic, the images show -- from left to right -- a small, bright spot moving from the outermost B ring across the Cassini Division and all the way across the A ring. In each image, this spot is centered on the point in the rings directly opposite the sun. Theoretical models for the opposition effect suggest that it can be explained by light being scattered several times within the surfaces of individual, transparent, icy ring particles on scales of about 40 micrometers, or 1/500th of an inch. Similar effects are seen in laboratory studies of bright, finely-textured material such as snow or sugar crystals. In this mosaic, blue colors highlight the icy rings (2.35 microns), green represents sunlight reflected by the clouds of Saturn (2.86 microns) and red depicts thermal emission from the planet's interior (5.02 microns). The rings were observed while they were in front of the planet, producing a complex interplay of sunlight reflected from the rings and the shadows cast by the rings on the cloud tops of Saturn. The yellow-green sunlit clouds of Saturn are seen in the upper right corner of the mosaic beyond the outer edge of the A ring, and also through the 4,000-kilometer-wide (2,400 mile) Cassini Division in the left third of the mosaic. (Yellow indicates a mixture of reflected sunlight and thermal emission.) The shadowed regions of the planet, on the other hand, appear deep red because only thermal emission produced deep inside Saturn itself is visible. At exact opposition, the shadows of the rings are hidden behind the rings themselves, but away from this point shadows can be seen peeking out from behind the edges of the A and B rings into the Cassini Division, as well as beyond the outer edge of the A ring. If one looks closely, one can even trace the A ring's shadow behind the partly transparent A ring, as a faint purple band. Within this band, a thin blue-green line, crossing obliquely behind the A ring is caused by sunlight passing through the narrow Encke Gap in the outer A ring. The Cassini spacecraft was at a distance of 254,000 kilometers (157,800 miles) from the center of Saturn when these images were taken, while the opening angle of the rings to the sun was 16.3 degrees. The image scale at the rings is approximately 70 kilometers (40 miles) per pixel. All nine images were taken over a period of 27 minutes, and the vertical dimension of the mosaic is 1.8 degrees. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter was designed, developed and assembled at JPL. The Visual and Infrared Mapping Spectrometer team is based at the University of Arizona, where this image was produced. For more information about the Cassini-Huygens mission, visit: http://saturn.jpl.nasa.gov/home/index.cfm. The visual and infrared mapping spectrometer team home page is at: http://wwwvims.lpl.arizona.edu . Credit: NASA/JPL/University of Arizona |
| Date |
June 26, 2007 |
|
Hubble Sees 'Comet Galaxy' B
| Title |
Hubble Sees 'Comet Galaxy' Being Ripped Apart By Galaxy Cluster |
|
Hubble Images of Asteroids H
| Title |
Hubble Images of Asteroids Help Astronomers Prepare for Spacecraft Visit |
|
Hubble Images of Asteroids H
| Title |
Hubble Images of Asteroids Help Astronomers Prepare for Spacecraft Visit |
|
Uncovering the Veil Nebula
| Title |
Uncovering the Veil Nebula |
| General Information |
What is Hubble Heritage? A monthly showcase of new and archival Hubble images. Go to the Heritage site. What is a News Nugget? News Nuggets are bulletins from the world of astronomy. NASA's Hubble Space Telescope photographed three magnificent sections of the Veil Nebula -- the shattered remains of a supernova that exploded thousands of years ago. This series of images provides beautifully detailed views of the delicate, wispy structure resulting from this cosmic explosion. The Veil Nebula is one of the most spectacular supernova remnants in the sky. The entire shell spans about 3 degrees on the sky, corresponding to about 6 full moons. |
|
Saturn Stars in Three Hubble
| Title |
Saturn Stars in Three Hubble Movies |
|
Saturn Stars in Three Hubble
| Title |
Saturn Stars in Three Hubble Movies |
|
Saturn Stars in Three Hubble
| Title |
Saturn Stars in Three Hubble Movies |
|
Saturn Stars in Three Hubble
| Title |
Saturn Stars in Three Hubble Movies |
|
Saturn Stars in Three Hubble
| Title |
Saturn Stars in Three Hubble Movies |
|
Saturn Stars in Three Hubble
| Title |
Saturn Stars in Three Hubble Movies |
|
Saturn Stars in Three Hubble
| Title |
Saturn Stars in Three Hubble Movies |
|
Saturn Stars in Three Hubble
| Title |
Saturn Stars in Three Hubble Movies |
|
Saturn Stars in Three Hubble
| Title |
Saturn Stars in Three Hubble Movies |
|
Saturn Stars in Three Hubble
| Title |
Saturn Stars in Three Hubble Movies |
|
Saturn Stars in Three Hubble
| Title |
Saturn Stars in Three Hubble Movies |
|
Saturn Stars in Three Hubble
| Title |
Saturn Stars in Three Hubble Movies |
|
Saturn Stars in Three Hubble
| Title |
Saturn Stars in Three Hubble Movies |
|
Hubble Images of Asteroids H
| Title |
Hubble Images of Asteroids Help Astronomers Prepare for Spacecraft Visit |
|
Hubble Images of Asteroids H
| Title |
Hubble Images of Asteroids Help Astronomers Prepare for Spacecraft Visit |
|
Heatwave in Southern Califor
| Title |
Heatwave in Southern California |
| Description |
September 5, 2007, marked the end of a week-long heat wave that led to 31 deaths and triggered power outages across southern California, reported the L.A. Times. Temperatures climbed above 38 degrees Celsius (100 Fahrenheit) when a high-pressure system blocked cool air from the Pacific. The effect of the heat wave on different locations in the Southwest is shown in this pair of images, taken on September 5, at 11:25 a.m. local time (18:25 UTC) by the Moderate Resolution Imaging Spectroradiometer (MODIS [ http://modis.gsfc.nasa.gov ]) flying on NASA's Terra [ http://terra.nasa.gov/ ], in Northern California filters down from the top edge of the scene. NASA image created by Jesse Allen, using data obtained from the Goddard Land Processes data archives (LAADS). [ http://laads.gsfc.nasa.gov/ ], satellite. The photo-like, natural-color image (top) and corresponding land surface temperature image (bottom) illustrate the relationship between land cover, elevation, and temperature. The images show much of California and Nevada, and a smaller portion of Arizona and Utah. Not surprisingly, the hottest areas, shown in yellow, correspond with sparsely vegetated desert regions. In the natural-color image, the brush-covered Mojave Desert on the California-Nevada border is tan with splashes of pink where iron-rich sandstone is exposed. The small-leafed, woody vegetation provides little shade, allowing the Earth's surface to be exposed to the Sun. The rock-and-dirt desert absorbs sunlight, and temperatures climb (yellow areas of bottom image). The other hot spots in the image occur in the cactus-dotted Sonoran Desert, which encompasses the southernmost portions of inland California and southwestern Arizona, and the much smaller Colorado Desert west of the Salton Sea. Irrigated land south of the Salton Sea and along the Colorado River is a web of brown-green. The presence of water and vegetation in these irrigated areas makes the land cooler. Elevation also plays a role in the surface temperatures of the Sonoran Desert. Pockets of low-elevation land are much warmer than the lines of mountains that separate them, particularly in southwestern Arizona. The coolest parts of California, shown in purple and blue, are in the mountains, most prominently the Sierra Nevada, but also the San Bernardino Mountains east of Los Angeles. In the photo-like images, the mountain ranges are dark green, colored by trees. The vegetation cover and the high elevation keep the land cooler than surrounding low-elevation sites. The other significant cool spot in the image is the San Joaquin Valley. Like the irrigated farm land bordering the Salton Sea and the Colorado River, this area is kept cool by the presence of water and plants. The coldest areas in the image appear to be in Arizona, Utah, and Nevada, which are marked by streaks of dark purple. These cold signatures are from clouds.The final correlation between land cover and temperature can be seen in urban areas along the coast. In the photo-like image, Los Angles sprawls as a silver-gray patch from the coast to the San Bernardino Mountains. Since urban surfaces absorb heat, Los Angles is slightly warmer in the surface temperature image than the surrounding landscape. In the north, the San Francisco urban area is similarly warmer than its surroundings. Though the extreme temperatures raised the fire danger in Southern California, MODIS did not detect any fires in the region. Fires, marked with red dots, were burning in Central California south and east of San Francisco. Smoke from a large fire [ http://earthobservatory.nasa.gov/NaturalHazards/natural_hazards_v2.php3?img_id=14497 ] |
|
2001 Mars Odyssey Turns 5
| title |
2001 Mars Odyssey Turns 5 |
| Description |
Five years after leaving Florida for Mars, NASA's Mars Odyssey spacecraft is still orbiting the red planet, collecting scientific data and relaying communications from NASA's two Mars rovers to Earth. Images such as this spectacular, color view of sun-bathed, layered escarpments and wind-scalloped, basalt dunes in the solar system's largest canyon continue to beckon space explorers and guide the way for future missions. Basaltic dunes are common on Mars but rare on Earth. Rounded knobs and mesas on the canyon floor are reminiscent of desert geology in the southwestern U.S. A team led by Phil Christensen, principal investigator for Odyssey's cameras at Arizona State University, Jim Bell at Cornell University, and space artist Don Davis created this panorama. They added color to radiance files from the Thermal Emission Imaging System (THEMIS), a camera on Odyssey that takes images in both the visible and infrared parts of the spectrum. They correlated the radiance - intensity of reflected sunlight - with that of other color images from Mars and mimimized the effects of residual scattered light in the images. In addition to producing images such as this, Mars Odyssey has made global observations of Martian climate, geology, and mineralogy. The spacecraft's Gamma Ray Spectrometer has allowed scientists to make maps of the elemental distribution of hydrogen, silicon, iron, potassium, thorium, and chlorine on the Martian surface. A global map of minerals associated with water, essential to life as we know it, guided NASA in its selection of Meridiani Planum, the landing site for NASA's Opportunity rover, an area rich in hematite. Odyssey is currently supporting landing site selection for the Phoenix Scout Mission, to be launched in 2007, using data showing that surface areas near the poles of Mars consist of more than 50 percent water ice by volume. Other Odyssey accomplishments include measurement of radiation, a prerequisite for future human exploration because of its potential health effects, and a groundbreaking program in education outreach that has allowed students to take pictures of Mars and conduct scientific investigations with cameras on Odyssey. Mars Odyssey was launched April 7, 2001 on a Delta II rocket from Cape Canaveral, Florida, and reached Mars on October 24, 2001. Odyssey employed a technique called "aerobraking" that used the atmosphere of Mars to slow down and gradually bring the spacecraft closer to Mars with each orbit. Odyssey's science mapping mission began in February 2002. The primary science mission continued through August 2004. Odyssey is currently in its extended mission. Credit: NASA/JPL-Caltech/ASU/Cornell/Don Davis |
|
Heatwave in Southern Califor
nasa, nasanaturalhazards
September 5, 2007, marked th
california_tmo_2007248_lst_l
| mediatype |
IMAGE |
| mediatype |
image |
| date |
2007-09-05 |
| creator |
NASA -- NASA Image Of The Day |
| identifier |
california_tmo_2007248_lst_lrg |
|
Heatwave in Southern Califor
nasa, nasanaturalhazards
September 5, 2007, marked th
california_tmo_2007248_lst_l
| mediatype |
IMAGE |
| mediatype |
image |
| date |
2007-09-05 |
| creator |
NASA -- NASA Image Of The Day |
| identifier |
california_tmo_2007248_lst_lrg |
|
Heat Wave in Southern Califo
nasa, nasaimageofthedaygalle
September 5, 2007, marked th
ge_08024
| mediatype |
IMAGE |
| mediatype |
image |
| date |
2007-09-05 |
| creator |
NASA -- NASA image created by Jesse Allen, using data obtained from the laads.gsfc.nasa.gov/ Goddard Land Processes data archives (LAADS). |
| identifier |
ge_08024 |
|
Heat Wave in Southern Califo
nasa, nasaimageofthedaygalle
September 5, 2007, marked th
ge_08024
| mediatype |
IMAGE |
| mediatype |
image |
| date |
2007-09-05 |
| creator |
NASA -- NASA image created by Jesse Allen, using data obtained from the laads.gsfc.nasa.gov/ Goddard Land Processes data archives (LAADS). |
| identifier |
ge_08024 |
|
Rocky Mesas of Nilosyrtis Me
PIA10071
Sol (our sun)
HiRISE
| Title |
Rocky Mesas of Nilosyrtis Mensae Region, in Color |
| Original Caption Released with Image |
Mesas in the Nilosyrtis Mensae region of Mars appear in enhanced color in this image from the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter. The image was taken on April 5, 2007, as part of a campaign to examine more than two dozen candidate landing sites for the NASA Mars Science Laboratory rover, which is scheduled for launch in 2009. This image shows a region of science interest to which the Mars Science Laboratory rover might drive. It would need to first land in a nearby area that is flatter and less rocky. Clay minerals have been detected in this region by imaging spectrometers on the European Space Agency's Mars Express orbiter and on the Mars Reconnaissance Orbiter. These minerals are of great interest in the search for evidence of life on ancient Mars. Someday the capability may exist for precision landing and hazard avoidance, so a rover could be set down right next to such rugged outcrops of interest for study and perhaps for collection of rock samples for return to Earth. The area covered by this image is about one kilometer (six-tenths of a mile) across, at 29.3 degrees north latitude, 73.3 degrees east longitude. North is up. The view is a composite of exposures that HiRISE took in the infrared, red and blue portions of the spectrum. Color is enhanced, a technique useful for analyzing landscapes. This is a portion of the full-frame color image catalogued as PSP_003231_2095 [ http://hirise.lpl.arizona.edu/PSP_003231_2095 ] in the HiRISE collection. It was taken at a local Mars time of 3:28 p.m. The scene is illuminated from the west with a solar incidence angle of 66 degrees, thus the sun was about 24 degrees above the horizon. The season on Mars was northern autumn. |
|
Color Image of Nili Fossae T
PIA10070
Sol (our sun)
HiRISE
| Title |
Color Image of Nili Fossae Trough, a Candidate MSL Landing Site |
| Original Caption Released with Image |
A portion of a trough in the Nili Fossae region of Mars is shown in enhanced color in this image from the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter. The image was taken on March 24, 2007, as part of a campaign to examine more than two dozen candidate landing sites for the NASA Mars Science Laboratory rover, which is scheduled for launch in 2009. The Nili Fossae region has one of the largest exposures of clay minerals discovered by the mapping spectrometer (called OMEGA for its French name's acronym) on the European Space Agency's Mars Express orbiter. These minerals have also been mapped in greater detail by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) on the Mars Reconnaissance Orbiter (see http://crism.jhuapl.edu/gallery/featuredImage [ http://crism.jhuapl.edu/gallery/featuredImage ]). This image covers an area nearly one kilometer (six-tenths of a mile) wide, at 21.1 degrees north latitude, 74.2 degrees east longitude. North is up. It is a composite of exposures that HiRISE took in the infrared, red and blue portions of the spectrum. Color is enhanced beyond the standard enhancement in HiRISE color images, as this view is excerpted from a special video treatment of the full-frame image. The purple areas are basaltic in composition, including sand-sized material that bounces around in the wind to form dunes. Basalt in the most common type of volcanic rock on the Earth and other terrestrial planets. Orange areas are rich in clays. Clay minerals contain water in their mineral structure and may also preserve organic materials, so there is great interest in studying these deposits to understand past environments that could have supported life. The blue-green patches are outcrops of unaltered rocks rich in the mineral pyroxene. This is a portion of the full-frame color image catalogued as PSP_003086_2015 [ http://hirise.lpl.arizona.edu/PSP_003086_2015 ] in the HiRISE collection. The image was taken at a local Mars time of 3:38 p.m. The scene is illuminated from the west with a solar incidence angle of 62 degrees, thus the sun was about 28 degrees above the horizon. The season on Mars was northern autumn. |
|
Ares Vallis Cataract
PIA09683
Sol (our sun)
HiRISE
| Title |
Ares Vallis Cataract |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003538_1885 [ http://hirise.lpl.arizona.edu/PSP_003538_1885 ]) shows a dry cataract within Ares Vallis. A cataract is a large waterfall where there is a high, steep drop. The presence of this large cataract in Ares Vallis confirms that this channel was carved by water, probably in one or many large catastrophic flooding events. This feature has many of the same characteristics as the cataracts on Earth associated with the flood that carved the Channelled Scablands in Washington state, including horseshoe-shaped headcuts and longitudinal grooves. These grooves in the lower portion of the image lead up to the cataract, with the water flowing from the south to the north in this image. It then flowed down the cataract into the smaller incised channel. The horseshoe-shaped headcut here is only part of a larger cataract system, and probably formed during the last stage of flooding. The inner channels are now filled with dunes formed by wind blowing along the channel floor. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:28 PMDegrees latitude (centered): 8.4° Degrees longitude (East): 335.6° Range to target site: 276.0 km (172.5 miles) Original image scale range: 27.6 cm/pixel (with 1 x 1 binning) so objects ~83 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 1.3° Phase angle: 56.9° Solar incidence angle: 58°, with the Sun about 32° above the horizon Solar longitude: 228.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Ares Vallis Cataract
PIA09683
Sol (our sun)
HiRISE
| Title |
Ares Vallis Cataract |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003538_1885 [ http://hirise.lpl.arizona.edu/PSP_003538_1885 ]) shows a dry cataract within Ares Vallis. A cataract is a large waterfall where there is a high, steep drop. The presence of this large cataract in Ares Vallis confirms that this channel was carved by water, probably in one or many large catastrophic flooding events. This feature has many of the same characteristics as the cataracts on Earth associated with the flood that carved the Channelled Scablands in Washington state, including horseshoe-shaped headcuts and longitudinal grooves. These grooves in the lower portion of the image lead up to the cataract, with the water flowing from the south to the north in this image. It then flowed down the cataract into the smaller incised channel. The horseshoe-shaped headcut here is only part of a larger cataract system, and probably formed during the last stage of flooding. The inner channels are now filled with dunes formed by wind blowing along the channel floor. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:28 PMDegrees latitude (centered): 8.4° Degrees longitude (East): 335.6° Range to target site: 276.0 km (172.5 miles) Original image scale range: 27.6 cm/pixel (with 1 x 1 binning) so objects ~83 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 1.3° Phase angle: 56.9° Solar incidence angle: 58°, with the Sun about 32° above the horizon Solar longitude: 228.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Slope Streak South of Olympu
PIA09685
Sol (our sun)
HiRISE
| Title |
Slope Streak South of Olympus Mons |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003239_1870 [ http://hirise.lpl.arizona.edu/PSP_003239_1870 ]) reveals slope streaks in an area south of Olympus Mons in the northern hemisphere of Mars. These features are found along the slopes of impact craters, buttes, knobs, ridges, and troughs on Mars. Streaks generally start at a point source and widen downslope, traveling over and sometimes around various obstacles. The subimage [ http://photojournal.jpl.nasa.gov/figures/PIA09685_fig2.jpg ], shows a very wide dark slope that has developed small fingers at its terminus. The dark slope streak does not appear to have relief and does not disturb the pre-existing surface leaving the underlying topography intact beneath its dark trail. This can be seen particularly well near the streak termination. There are also no observable deposits of displaced materials along the terminus. Surrounding the dark slope streak are multiple ~1 meter deep, triangular faceted scars left behind from avalanched slope materials. The high standing remnant surfaces on either side of the lower scarred surface are clearly visible. Avalanche scars are sometimes found in areas where slope streaks have formed but they are believed to be unrelated. The trail of the dark slope streak appears to cross over the avalanche scars suggesting that the slope streak formed more recently. Slope streak formation is among the few known processes currently active on Mars. While their mechanism of formation and triggering is debated, they are most commonly believed to form by downslope movement of extremely dry sand or very fine-grained dust in an almost fluidlike manner (analogous to a terrestrial snow avalanche) exposing darker underlying material. Other ideas include the triggering of slope streak formation by possible concentrations of near-surface ice or scouring of the surface by running water from aquifers intercepting slope faces, briny liquid flows, dry granular flow, mixed water-dust flows, and/or hydrothermal activity. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:35 PM Degrees latitude (centered): 7.1° Degrees longitude (East): 218.2° Range to target site: 274.5 km (171.6 miles) Original image scale range: 54.9 cm/pixel (with 2 x 2 binning) so objects ~165 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 4.2° Phase angle: 61.3° Solar incidence angle: 57°, with the Sun about 33° above the horizon Solar longitude: 213.6°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Slope Streak South of Olympu
PIA09685
Sol (our sun)
HiRISE
| Title |
Slope Streak South of Olympus Mons |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003239_1870 [ http://hirise.lpl.arizona.edu/PSP_003239_1870 ]) reveals slope streaks in an area south of Olympus Mons in the northern hemisphere of Mars. These features are found along the slopes of impact craters, buttes, knobs, ridges, and troughs on Mars. Streaks generally start at a point source and widen downslope, traveling over and sometimes around various obstacles. The subimage [ http://photojournal.jpl.nasa.gov/figures/PIA09685_fig2.jpg ], shows a very wide dark slope that has developed small fingers at its terminus. The dark slope streak does not appear to have relief and does not disturb the pre-existing surface leaving the underlying topography intact beneath its dark trail. This can be seen particularly well near the streak termination. There are also no observable deposits of displaced materials along the terminus. Surrounding the dark slope streak are multiple ~1 meter deep, triangular faceted scars left behind from avalanched slope materials. The high standing remnant surfaces on either side of the lower scarred surface are clearly visible. Avalanche scars are sometimes found in areas where slope streaks have formed but they are believed to be unrelated. The trail of the dark slope streak appears to cross over the avalanche scars suggesting that the slope streak formed more recently. Slope streak formation is among the few known processes currently active on Mars. While their mechanism of formation and triggering is debated, they are most commonly believed to form by downslope movement of extremely dry sand or very fine-grained dust in an almost fluidlike manner (analogous to a terrestrial snow avalanche) exposing darker underlying material. Other ideas include the triggering of slope streak formation by possible concentrations of near-surface ice or scouring of the surface by running water from aquifers intercepting slope faces, briny liquid flows, dry granular flow, mixed water-dust flows, and/or hydrothermal activity. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:35 PM Degrees latitude (centered): 7.1° Degrees longitude (East): 218.2° Range to target site: 274.5 km (171.6 miles) Original image scale range: 54.9 cm/pixel (with 2 x 2 binning) so objects ~165 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 4.2° Phase angle: 61.3° Solar incidence angle: 57°, with the Sun about 33° above the horizon Solar longitude: 213.6°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Faults and Folds in Western
PIA09682
Sol (our sun)
HiRISE
| Title |
Faults and Folds in Western Candor Chasma |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003540_1735 [ http://hirise.lpl.arizona.edu/PSP_003540_1735 ]) shows various interesting structures along the floor of Candor Chasma, a major canyon of Valles Marineris. The rocks along the floor of the chasma consist of multiple layers of light-toned material, possibly windblown or water-lain sediment. These layers have been shifted along faults and also folded, giving the layers an apparent wavy appearance as they are exposed at the surface through erosion. Some waviness in the layers may also have formed as these sediments were laid down, for example, in dunes or large ripples. Detailed mapping of these faults and folds may help reveal the origin of these layered deposits and if water played any role in their formation. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:33 PM Degrees latitude (centered): -6.4° Degrees longitude (East): 283.2° Range to target site: 263.6 km (164.7 miles) Original image scale range: 26.4 cm/pixel (with 1 x 1 binning) so objects ~79 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.3° Phase angle: 46.0° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 228.2°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Faults and Folds in Western
PIA09682
Sol (our sun)
HiRISE
| Title |
Faults and Folds in Western Candor Chasma |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003540_1735 [ http://hirise.lpl.arizona.edu/PSP_003540_1735 ]) shows various interesting structures along the floor of Candor Chasma, a major canyon of Valles Marineris. The rocks along the floor of the chasma consist of multiple layers of light-toned material, possibly windblown or water-lain sediment. These layers have been shifted along faults and also folded, giving the layers an apparent wavy appearance as they are exposed at the surface through erosion. Some waviness in the layers may also have formed as these sediments were laid down, for example, in dunes or large ripples. Detailed mapping of these faults and folds may help reveal the origin of these layered deposits and if water played any role in their formation. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:33 PM Degrees latitude (centered): -6.4° Degrees longitude (East): 283.2° Range to target site: 263.6 km (164.7 miles) Original image scale range: 26.4 cm/pixel (with 1 x 1 binning) so objects ~79 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.3° Phase angle: 46.0° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 228.2°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Layers in Galle Crater
PIA09686
Sol (our sun)
HiRISE
| Title |
Layers in Galle Crater |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image shows part of a large mass of layered rock in Galle Crater, in the southern cratered highlands of Mars. At low resolution, layers appear as bands and swirls which are nearly horizontal. This causes them to interact dramatically with topography, producing the appearance of folds and loops wrapping around small hills much like lines on a contour map. Zooming in at higher resolution, some long cracks (hundreds of meters long) are cutting across the layers, generally trending northeast-southwest. At full resolution (PSP_002655_1280 [ http://hirise.lpl.arizona.edu/PSP_002655_1280 ]), details of the layers are often obscured by ripples of wind-blown dust or textured patterns of erosion now eroding the rock. In the best exposures, such as that in the cutout section, the layers are fractured into blocks. Some of the layers are relatively resistant, and appear as ridges or fins in the cutout, often with little material supporting them from below. Although this seems to indicate relatively strong, coherent material, few boulders are visible. The ridge-forming layers may be weak, but separated by material with virtually no cohesion. Polygonal fracture patterns in the dark regolith between distinct layers could be due to ground ice, or regional tectonic stresses. Observation Toolbox Acquisition date: 2 February 2007 Local Mars time: 3:54 PM Degrees latitude (centered): -51.8° Degrees longitude (East): 330.0° Range to target site: 256.3 km (160.2 miles) Original image scale range: 25.6 cm/pixel (with 1 x 1 binning) so objects ~77 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 2.8° Phase angle: 71.5° Solar incidence angle: 69°, with the Sun about 21° above the horizon Solar longitude: 186.6°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Layers in Galle Crater
PIA09686
Sol (our sun)
HiRISE
| Title |
Layers in Galle Crater |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image shows part of a large mass of layered rock in Galle Crater, in the southern cratered highlands of Mars. At low resolution, layers appear as bands and swirls which are nearly horizontal. This causes them to interact dramatically with topography, producing the appearance of folds and loops wrapping around small hills much like lines on a contour map. Zooming in at higher resolution, some long cracks (hundreds of meters long) are cutting across the layers, generally trending northeast-southwest. At full resolution (PSP_002655_1280 [ http://hirise.lpl.arizona.edu/PSP_002655_1280 ]), details of the layers are often obscured by ripples of wind-blown dust or textured patterns of erosion now eroding the rock. In the best exposures, such as that in the cutout section, the layers are fractured into blocks. Some of the layers are relatively resistant, and appear as ridges or fins in the cutout, often with little material supporting them from below. Although this seems to indicate relatively strong, coherent material, few boulders are visible. The ridge-forming layers may be weak, but separated by material with virtually no cohesion. Polygonal fracture patterns in the dark regolith between distinct layers could be due to ground ice, or regional tectonic stresses. Observation Toolbox Acquisition date: 2 February 2007 Local Mars time: 3:54 PM Degrees latitude (centered): -51.8° Degrees longitude (East): 330.0° Range to target site: 256.3 km (160.2 miles) Original image scale range: 25.6 cm/pixel (with 1 x 1 binning) so objects ~77 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 2.8° Phase angle: 71.5° Solar incidence angle: 69°, with the Sun about 21° above the horizon Solar longitude: 186.6°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Evros Vallis and Nearby Crat
PIA09684
Sol (our sun)
HiRISE
| Title |
Evros Vallis and Nearby Craters |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003273_1675 [ http://hirise.lpl.arizona.edu/PSP_003273_1675 ]) shows part of Evros Vallis, one of the Martian valley networks. These more ancient valley networks may have been eroded by flowing water during a warmer, wetter period of Martian history. Many dunes are visibile along the valley floor, as well as throughout the scene and in a partially exhumed crater on the valley wall. There are multiple generations and orientations of dunes. Dune orientation reflects the dominant or prevailing wind direction. Multiple dune orientations indicate that this region has experienced different wind regimes. An exhumed crater is one that likely formed a long time ago, was buried, and is now being re-exposed because the materials that originally covered it are being eroded away. The prominent crater on the valley wall as well as several other craters in this scene are thought to be partially exhumed. The subimage [ http://photojournal.jpl.nasa.gov/figures/PIA09684_fig2.jpg ] (approximately 300 m across) shows a couple groups of secondary craters. Secondary craters are craters that form when ejecta from the primary crater hits the surface with enough energy to form another smaller crater. As seen in the subimage, secondary craters often form in clusters spatially, because ejecta thrown out of the primary crater impacts the surface near each other at approximately the same time. Many potential secondary craters have have similar morphologies and have distinct, bright ejecta. This implies that these craters are relatively young and that their ejecta have yet to be covered by dust. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:41 PM Degrees latitude (centered): -12.6° Degrees longitude (East): 13.3° Range to target site: 264.3 km (165.2 miles) Original image scale range: 26.4 cm/pixel (with 1 x 1 binning) so objects ~79 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.6° Phase angle: 46.2° Solar incidence angle: 54°, with the Sun about 36° above the horizon Solar longitude: 215.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Evros Vallis and Nearby Crat
PIA09684
Sol (our sun)
HiRISE
| Title |
Evros Vallis and Nearby Craters |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003273_1675 [ http://hirise.lpl.arizona.edu/PSP_003273_1675 ]) shows part of Evros Vallis, one of the Martian valley networks. These more ancient valley networks may have been eroded by flowing water during a warmer, wetter period of Martian history. Many dunes are visibile along the valley floor, as well as throughout the scene and in a partially exhumed crater on the valley wall. There are multiple generations and orientations of dunes. Dune orientation reflects the dominant or prevailing wind direction. Multiple dune orientations indicate that this region has experienced different wind regimes. An exhumed crater is one that likely formed a long time ago, was buried, and is now being re-exposed because the materials that originally covered it are being eroded away. The prominent crater on the valley wall as well as several other craters in this scene are thought to be partially exhumed. The subimage [ http://photojournal.jpl.nasa.gov/figures/PIA09684_fig2.jpg ] (approximately 300 m across) shows a couple groups of secondary craters. Secondary craters are craters that form when ejecta from the primary crater hits the surface with enough energy to form another smaller crater. As seen in the subimage, secondary craters often form in clusters spatially, because ejecta thrown out of the primary crater impacts the surface near each other at approximately the same time. Many potential secondary craters have have similar morphologies and have distinct, bright ejecta. This implies that these craters are relatively young and that their ejecta have yet to be covered by dust. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:41 PM Degrees latitude (centered): -12.6° Degrees longitude (East): 13.3° Range to target site: 264.3 km (165.2 miles) Original image scale range: 26.4 cm/pixel (with 1 x 1 binning) so objects ~79 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.6° Phase angle: 46.2° Solar incidence angle: 54°, with the Sun about 36° above the horizon Solar longitude: 215.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Dark Slope Streak with Strea
PIA09681
Sol (our sun)
HiRISE
| Title |
Dark Slope Streak with Streak-Generated Topography |
| Original Caption Released with Image |
Click on image for larger version This is a portion of HiRISE image PSP_003542_2035 [ http://hirise.lpl.arizona.edu/PSP_003542_2035 ] which shows a dark slope streak north of Olympus Mons, in a region was covered by Mars Orbital Camera image R09/00701. (This portion is rotated with south up so that the direction the streak flowed is towards the bottom of the frame). This image shows that the slope streak forming process altered the pre-existing surface both by excavating material and depositing it. The fine scalloped texture of the surrounding surface is not present within the streak, and there are low linear mounds within the streak that are not seen outside. Their absence outside the streak indicates that the formation of the mounds resulted from the streak formation process. There is a large boulder or knob within the streak near the top of the frame which the dark slope streak appears to have flowed around, leaving a light-toned patch of the surrounding surface material intact downstream of the boulder. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:22 PM Degrees latitude (centered): 23.3° Degrees longitude (East): 223.7° Range to target site: 285.3 km (178.3 miles) Original image scale range: 28.5 cm/pixel (with 1 x 1 binning) so objects ~86 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.6° Phase angle: 71.6° Solar incidence angle: 65°, with the Sun about 25° above the horizon Solar longitude: 228.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Dark Slope Streak with Strea
PIA09681
Sol (our sun)
HiRISE
| Title |
Dark Slope Streak with Streak-Generated Topography |
| Original Caption Released with Image |
Click on image for larger version This is a portion of HiRISE image PSP_003542_2035 [ http://hirise.lpl.arizona.edu/PSP_003542_2035 ] which shows a dark slope streak north of Olympus Mons, in a region was covered by Mars Orbital Camera image R09/00701. (This portion is rotated with south up so that the direction the streak flowed is towards the bottom of the frame). This image shows that the slope streak forming process altered the pre-existing surface both by excavating material and depositing it. The fine scalloped texture of the surrounding surface is not present within the streak, and there are low linear mounds within the streak that are not seen outside. Their absence outside the streak indicates that the formation of the mounds resulted from the streak formation process. There is a large boulder or knob within the streak near the top of the frame which the dark slope streak appears to have flowed around, leaving a light-toned patch of the surrounding surface material intact downstream of the boulder. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:22 PM Degrees latitude (centered): 23.3° Degrees longitude (East): 223.7° Range to target site: 285.3 km (178.3 miles) Original image scale range: 28.5 cm/pixel (with 1 x 1 binning) so objects ~86 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.6° Phase angle: 71.6° Solar incidence angle: 65°, with the Sun about 25° above the horizon Solar longitude: 228.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Layered Deposits in Ritchey
PIA09667
Sol (our sun)
HiRISE
| Title |
Layered Deposits in Ritchey Crater |
| Original Caption Released with Image |
Click on image for larger version HiRISE image (PSP_003249_1510 [ http://hirise.lpl.arizona.edu/PSP_003249_1510 ]) shows eroding layered deposits in Ritchey Crater, a large impact crater in the southern highlands. Three general units can be seen: a relatively dark upper layer, a light middle unit, and the floor material, which may be mostly obscured by dust. The dark cap layer appears to be relatively hard and resistant, while the light material is weak. Once the upper layer is removed, the light layer does not last long. The cutout from the top center part of the image shows this stack. The dark unit is thin and breaking into boulders. The light material is actually divided into smaller layers, and is pervasively fractured. However, the boulders falling from the edge are mostly small and rarely remain intact if they move more than a few meters. The cracking of the layer could be due to water loss from the layer, or to regional tectonic effects such as stresses from burial and erosion. The base unit is partially covered by wind-blown ripples. It is unclear how each of these layers formed. Volcanic ash layers, lake or stream deposits, or sandstone deposited by dunes can all produce horizontal layers. Unraveling the origin would provide important clues to Mars' past. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:40 PM Degrees latitude (centered): -28.5° Degrees longitude (East): 309.4° Range to target site: 259.1 km (161.9 miles) Original image scale range: 25.9 cm/pixel (with 1 x 1 binning) so objects ~78 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.4° Phase angle: 60.4° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 214.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Layered Deposits in Ritchey
PIA09667
Sol (our sun)
HiRISE
| Title |
Layered Deposits in Ritchey Crater |
| Original Caption Released with Image |
Click on image for larger version HiRISE image (PSP_003249_1510 [ http://hirise.lpl.arizona.edu/PSP_003249_1510 ]) shows eroding layered deposits in Ritchey Crater, a large impact crater in the southern highlands. Three general units can be seen: a relatively dark upper layer, a light middle unit, and the floor material, which may be mostly obscured by dust. The dark cap layer appears to be relatively hard and resistant, while the light material is weak. Once the upper layer is removed, the light layer does not last long. The cutout from the top center part of the image shows this stack. The dark unit is thin and breaking into boulders. The light material is actually divided into smaller layers, and is pervasively fractured. However, the boulders falling from the edge are mostly small and rarely remain intact if they move more than a few meters. The cracking of the layer could be due to water loss from the layer, or to regional tectonic effects such as stresses from burial and erosion. The base unit is partially covered by wind-blown ripples. It is unclear how each of these layers formed. Volcanic ash layers, lake or stream deposits, or sandstone deposited by dunes can all produce horizontal layers. Unraveling the origin would provide important clues to Mars' past. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:40 PM Degrees latitude (centered): -28.5° Degrees longitude (East): 309.4° Range to target site: 259.1 km (161.9 miles) Original image scale range: 25.9 cm/pixel (with 1 x 1 binning) so objects ~78 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.4° Phase angle: 60.4° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 214.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Layered Deposits in Ritchey
PIA09667
Sol (our sun)
HiRISE
| Title |
Layered Deposits in Ritchey Crater |
| Original Caption Released with Image |
Click on image for larger version HiRISE image (PSP_003249_1510 [ http://hirise.lpl.arizona.edu/PSP_003249_1510 ]) shows eroding layered deposits in Ritchey Crater, a large impact crater in the southern highlands. Three general units can be seen: a relatively dark upper layer, a light middle unit, and the floor material, which may be mostly obscured by dust. The dark cap layer appears to be relatively hard and resistant, while the light material is weak. Once the upper layer is removed, the light layer does not last long. The cutout from the top center part of the image shows this stack. The dark unit is thin and breaking into boulders. The light material is actually divided into smaller layers, and is pervasively fractured. However, the boulders falling from the edge are mostly small and rarely remain intact if they move more than a few meters. The cracking of the layer could be due to water loss from the layer, or to regional tectonic effects such as stresses from burial and erosion. The base unit is partially covered by wind-blown ripples. It is unclear how each of these layers formed. Volcanic ash layers, lake or stream deposits, or sandstone deposited by dunes can all produce horizontal layers. Unraveling the origin would provide important clues to Mars' past. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:40 PM Degrees latitude (centered): -28.5° Degrees longitude (East): 309.4° Range to target site: 259.1 km (161.9 miles) Original image scale range: 25.9 cm/pixel (with 1 x 1 binning) so objects ~78 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.4° Phase angle: 60.4° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 214.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Proposed MSL Site in Eberswa
PIA09678
Sol (our sun)
HiRISE
| Title |
Proposed MSL Site in Eberswalde Crater |
| Original Caption Released with Image |
Click on image for larger version HiRISE image (PSP_003231_2095 [ http://hirise.lpl.arizona.edu/PSP_003231_2095 ]) of proposed landing site for the Mars Science Laboratory (MSL) [ http://mars.jpl.nasa.gov/msl/ ] in Eberswalde Crater. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:28 PM Degrees latitude (centered): 29.3° Degrees longitude (East): 73.3° Range to target site: 290.3 km (181.4 miles) Original image scale range: 29.0 cm/pixel (with 1 x 1 binning) so objects ~87 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 8.0° Phase angle: 73.5° Solar incidence angle: 66°, with the Sun about 24° above the horizon Solar longitude: 213.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Proposed MSL Site in Eberswa
PIA09678
Sol (our sun)
HiRISE
| Title |
Proposed MSL Site in Eberswalde Crater |
| Original Caption Released with Image |
Click on image for larger version HiRISE image (PSP_003231_2095 [ http://hirise.lpl.arizona.edu/PSP_003231_2095 ]) of proposed landing site for the Mars Science Laboratory (MSL) [ http://mars.jpl.nasa.gov/msl/ ] in Eberswalde Crater. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:28 PM Degrees latitude (centered): 29.3° Degrees longitude (East): 73.3° Range to target site: 290.3 km (181.4 miles) Original image scale range: 29.0 cm/pixel (with 1 x 1 binning) so objects ~87 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 8.0° Phase angle: 73.5° Solar incidence angle: 66°, with the Sun about 24° above the horizon Solar longitude: 213.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Alluvial Fan Along a Crater
PIA09666
Sol (our sun)
HiRISE
| Title |
Alluvial Fan Along a Crater Wall |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003269_1600 [ http://hirise.lpl.arizona.edu/PSP_003269_1600 ]) covers an alluvial fan along the wall of a large crater in the mid latitudes of the southern hemisphere of Mars. The fan was formed when water and sediments drained down the steep wall of the crater creating a cone-shaped pile of debris at the base. As the fan grew with time, the channels carrying water and sediment across the fan surface changed locations, producing a layered deposit capped by channels radiating from the fan apex along the crater wall. Subsequent stripping of the fan surface by the wind has left the coarser channel deposits in relief and exposed the fine scale layering within the fan in many locations. While is it is not known whether the source of the water responsible for creating the fan was related runoff from precipitation or groundwater or perhaps both, alluvial fans of broadly similar form are observed in many locations on Earth and are usually formed by runoff from precipitation. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:42 PM Degrees latitude (centered): -19.9° Degrees longitude (East): 123.2° Range to target site: 258.6 km (161.6 miles) Original image scale range: 25.9 cm/pixel (with 1 x 1 binning) so objects ~78 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 4.7° Phase angle: 48.6° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 215.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Alluvial Fan Along a Crater
PIA09666
Sol (our sun)
HiRISE
| Title |
Alluvial Fan Along a Crater Wall |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003269_1600 [ http://hirise.lpl.arizona.edu/PSP_003269_1600 ]) covers an alluvial fan along the wall of a large crater in the mid latitudes of the southern hemisphere of Mars. The fan was formed when water and sediments drained down the steep wall of the crater creating a cone-shaped pile of debris at the base. As the fan grew with time, the channels carrying water and sediment across the fan surface changed locations, producing a layered deposit capped by channels radiating from the fan apex along the crater wall. Subsequent stripping of the fan surface by the wind has left the coarser channel deposits in relief and exposed the fine scale layering within the fan in many locations. While is it is not known whether the source of the water responsible for creating the fan was related runoff from precipitation or groundwater or perhaps both, alluvial fans of broadly similar form are observed in many locations on Earth and are usually formed by runoff from precipitation. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:42 PM Degrees latitude (centered): -19.9° Degrees longitude (East): 123.2° Range to target site: 258.6 km (161.6 miles) Original image scale range: 25.9 cm/pixel (with 1 x 1 binning) so objects ~78 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 4.7° Phase angle: 48.6° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 215.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Craters on South Polar Layer
PIA09670
Sol (our sun)
HiRISE
| Title |
Craters on South Polar Layered Deposits |
| Original Caption Released with Image |
Click on image for larger version This subimage, about 2.5 km across, shows the south polar layered deposits exposed in a scarp illuminated from the lower right. This HiRISE image (PSP_002882_0940 [ http://hirise.lpl.arizona.edu/PSP_002882_0940 ]) was taken in the southern spring, when the surface was completely covered by carbon dioxide frost. Therefore, most of the brightness variations in this scene are caused by topography. The polar layered deposits are broken into blocks by fractures in two directions. Neither set of fractures is parallel to the current scarp face, suggesting that they were not formed as the scarp was eroded, but instead are due to pre-existing weaknesses in the polar layered deposits. The four craters at lower left appear to have formed at the same time by an impactor that broke up as it entered the Martian atmosphere. The presence of many craters such as these on the south polar layered deposits indicates that they are not as young as the north polar layered deposits, which have very few craters on them. Observation Toolbox Acquisition date: 3 March 2007 Local Mars time: 7:06 PM Degrees latitude (centered): -85.9° Degrees longitude (East): 303.4° Range to target site: 246.9 km (154.3 miles) Original image scale range: 24.7 cm/pixel (with 1 x 1 binning) so objects ~74 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: POLAR STEREOGRAPHIC Emission angle: 6.7° Phase angle: 78.5° Solar incidence angle: 84°, with the Sun about 6° above the horizon Solar longitude: 196.9°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
|