Browse All : Space Shuttle Orbiter and Space Shuttle Endeavour from 2000

Printer Friendly
1 2 3 411 12
1-50 of 590
     
     
Earth's San Andreas Fault
title Earth's San Andreas Fault
date 02.11.2000
description The Earth's surface is broken. Cracks in the Earth's crust known as faults can run for hundreds of kilometers. These faults are frequently the sites of major earthquakes as the tectonic plates that cover the surface of the Earth shift. Pictured above is San Andreas Fault in California, one of the longest and most active faults. Visible as the linear feature to the right of the mountains, San Andreas Fault reaches 15 kilometers deep and is about 20 million years old. The above exaggerated-height image was created by combining radar deployed by the Space Shuttle Endeavour in February 2000 with a true-color Landsat picture. Along San Andreas Fault, the titanic Pacific Plate is shifting relative to the huge North American Plate by an average of a few centimeters per year. At that rate, in a few million years, the Earth's surface will look quite different than it does today.
Mast Supporting the Shuttle …
Name of Image Mast Supporting the Shuttle Radar Topographic Mission (SRTM)
Date of Image 2000-02-01
Full Description Launched February 11, 2000, the STS-99 Shuttle Radar Topographic Mission (SRTM) was the most ambitious Earth mapping mission to date. This photograph shows a 200-ft long (60 meter) mast supporting the SRTM jutted into space from the Space Shuttle Endeavour (out of frame). Orbiting some 145 miles (233 kilometers) above Earth, the giant structure was deployed on February 12, 2000 and its C-band and X-band anternae quickly went to work mapping parts of the Earth. The outboard antennae can be seen near bottom right. The SRTM radar was able to penetrate clouds as well as provide its own illumination, independent of daylight, and obtained 3-dimentional topographic images of the world's surface up to the Arctic and Antarctic Circles. The mission completed 222 hours of around the clock radar mapping, gathering enough information to fill more than 20,000 CDs.
Shuttle Radar Topographic Mi …
Name of Image Shuttle Radar Topographic Mission (SRTM) Illustration
Date of Image 2000-01-01
Full Description Launched February 11, 2000, the STS-99 Shuttle Radar Topographic Mission (SRTM) was the most ambitious Earth mapping mission to date. This illustration shows the Space Shuttle Endeavour orbiting some 145 miles (233 kilometers) above Earth. With C-band and X-band outboard anternae at work, one located in the Shuttle bay and the other located on the end of a 60-meter deployable mast, the SRTM radar was able to penetrate clouds as well as provide its own illumination, independent of daylight, obtaining 3-dimentional topographic images of the world's surface up to the Arctic and Antarctic Circles. The mission completed 222 hours of around the clock radar mapping, gathering enough information to fill more than 20,000 CDs.
Hawaiian Islands Captured by …
Name of Image Hawaiian Islands Captured by Shuttle Radar Topographic Mission (SRTM)
Date of Image 2000-02-19
Full Description Launched February 11, 2000, the STS-99 Shuttle Radar Topographic Mission (SRTM) was the most ambitious Earth mapping mission to date. A 200-ft long (60 meter) mast supporting the SRTM jutted into space from the Space Shuttle Endeavour. Orbiting some 145 miles (233 kilometers) above Earth, the giant structure was deployed on February 12, 2000 and the C-band and X-band anternae mounted on it quickly went to work mapping parts of the Earth. The SRTM radar was able to penetrate clouds as well as provide its own illumination, independent of daylight, and obtained 3-dimentional topographic images of the world's surface up to the Arctic and Antarctic Circles. The mission completed 222 hours of around the clock radar mapping, gathering enough information to fill more than 20,000 CDs. This image is an example of the data required by the SRTM. This is a view of the three Hawaiian Islands, Molokai (lower left), Lanai (right), and the northwest tip of Maui (upper left). The image brightness corresponds to the strength of radar signal reflected from the ground, while colors show the elevation as measured by SRTM, ranging from blue at the lowest elevations to white at the highest elevations. This image contains 5900 feet (1800 meters) of total relief. SRTM will help local officials to better understand and prepare for volcanic, tidal wave, and earthquake activities.
Shuttle Radar Topographic Mi …
Name of Image Shuttle Radar Topographic Mission (SRTM) Hardware in Payload Bay
Date of Image 2000-02-16
Full Description Launched February 11, 2000, the STS-99 Shuttle Radar Topographic Mission (SRTM) was the most ambitious Earth mapping mission to date. A 200-ft long (60 meter) mast supporting the SRTM where it jutted into space from the Space Shuttle Endeavour. In this photograph, part of the SRTM hardware is shown in the payload bay of the shuttle. Orbiting some 145 miles (233 kilometers) above Earth, the giant structure was deployed on February 12, 2000 and the C-band and X-band anternae mounted on it quickly went to work mapping parts of the Earth. The SRTM radar was able to penetrate clouds as well as provide its own illumination, independent of daylight, obtaining3-dimentional topographic images of the world's surface up to the Arctic and Antarctic Circles. The mission completed 222 hours of around the clock radar mapping gathering enough information to fill more than 20,000 CDs.
STS-99 Crew Insignia
Name of Image STS-99 Crew Insignia
Date of Image 1999-06-01
Full Description The STS-99 crew members designed the flight insignia for the Shuttle Radar Topography Mission (SRTM), the most ambitious Earth mapping mission to date. Two radar anternas, one located in the Shuttle bay and the other located on the end of a 60-meter deployable mast, was used during the mission to map Earth's features. The goal was to provide a 3-dimensional topographic map of the world's surface up to the Arctic and Antarctic Circles. In the patch, the clear portion of Earth illustrates the radar beams penetrating its cloudy atmosphere and the unique understanding of the home planet that is provided by space travel. The grid on Earth reflects the mapping character of the SRTM mission. The patch depicts the Space Shuttle Endeavour orbiting Earth in a star spangled universe. The rainbow along Earth's horizon resembles an orbital sunrise. The crew deems the bright colors of the rainbow as symbolic of the bright future ahead because of human beings' venturing into space. The crew of six launched aboard the Space Shuttle Endeavor on February 11, 2000 and completed 222 hours of around the clock radar mapping gathering enough information to fill more than 20,000 CDs.
3D View of Mount Miyake-Jima …
Title 3D View of Mount Miyake-Jima, Japan
Description This 3D perspective view shows the Japanese island called Miyake-Jima viewed from the northeast. This island?about 180 kilometers (110 miles) south of Tokyo?is part of the Izu chain of volcanic islands that runs south from the main Japanese island of Honshu. Dominated by the 820-meter-high (2,700 feet) volcano Mount Oyama, Miyake-Jima is home to 3,800 people. In late June 2000, a series of earthquakes alerted scientists to possible volcanic activity and on June 27 authorities evacuated 2,600 people. On July 7, the island was hit by a typhoon passing overhead, and on July 8 the volcano began erupting. The volcano erupted five times over the next week, spreading gray ash over surrounding areas. Detailed topographic information can be used to predict the directions that lava flows will take. The previous major eruption of Mount Oyama occurred in 1983, when lava flows destroyed hundreds of houses, and an earlier eruption in 1940 killed 11 people. This three-dimensional perspective view was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows, while colors show the elevation as measured by SRTM. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. The elevation is indicated by colors. Lowest elevation areas appear blue, medium elevations appear green, while higher elevations appear brown and white. The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Site name: Miyake-Jima, Japan Size: Scale varies in this perspective image, island has an area of 55 square kilometers (21 square miles). Vertical scale approximately equal to horizontal scale. Center Location: 34.1 deg. North lat., 139.5 deg. East lon. Orientation: perspective view is looking from northeast towards the southwest Original Data Resolution: 30 m Date Acquired: February 20, 2000 Image by NASA/JPL/NIMA
Cape Town, South Africa
Title Cape Town, South Africa
Description Cape Town and the Cape of Good Hope, South Africa, appear in the foreground of this perspective view generated from a Landsat satellite image and elevation data from the Shuttle Radar Topography Mission (SRTM). The city center is located at Table Bay (at the lower left), adjacent to Table Mountain, a 1,086-meter (3,563-foot) tall sandstone and granite natural landmark. Cape Town enjoys a Mediterranean climate but must deal with the limited water supply characteristic of that climate. Until the 1890s, the city relied upon streams and springs along the base of Table Mountain, then built a small reservoir atop Table Mountain to capture and store rainfall there. Now the needs of a much larger population are met in part by much larger reservoirs such as seen here far inland (mid-distance left) at the Theewaterskloof Dam. False Bay is the large bay to the south (right) of Cape Town, just around the Cape of Good Hope. It is one of the largest bays along the entire South African coast, but nearby Cape Town has its harbor at Table Bay. False Bay got its name because mariners approaching Cape Town from the east would see the prominent bay and falsely assume it to be the entrance to Cape Town harbor. Similarly, people often mistake the Cape of Good Hope as the southernmost point of Africa. But the southernmost point is actually Cape Agulhas, located just to the southeast (upper right) of this scene. This Landsat and SRTM perspective view uses a 2-times vertical exaggeration to enhance topographic expression. The back edges of the data sets form a false horizon and a false sky was added. Colors of the scene were enhanced by image processing but are the natural-color band combination from the Landsat satellite. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Geospatial-Intelligence Agency (NGA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. Image Courtesy SRTM Team [ http://earthobservatory.nasa.gov/cgi-bin/redirect?http://www.jpl.nasa.gov/srtm/ ] NASA/JPL/NIMA
Earthquake in Northern Chile
Title Earthquake in Northern Chile
Description A 7.8 earthquake rattled northern Chile on June 13, 2005, at 6:44 p.m. local time, killing 11 and leaving hundreds homeless, according to the Associated Press. The large quake shook much of South America and was felt in Brasilia, Brazil, approximately 2,400 kilometers to the east and in Santiago, Chile, 1,515 kilometers to the south. The most damage occurred near the earthquake?s center in the rural, mountainous section of the Tarapaca Province, where the shaking triggered landslides and flattened houses. This topographical image of northern Chile shows the geology that produced this earthquake. The center of the earthquake is represented with a plus sign in the image. To the east, pink represents the higher elevation of the mountains, with the highest peaks tipped in white. Among the tallest is the 5,995-meter-high Cerro Sillajhuay on the border with Bolivia. The steeply changing elevation and folds in the land around the earthquake?s center make it easy to see why the earthquake caused landslides. To the west of the center, the land gradually flattens into the flat Pampa del Tamarugal, a broad green ribbon of low-elevation land. Far to the west of the region shown here, the Nazca Plate (a section of the Earth?s crust that carries part of the Pacific Ocean) pushes steadily under the South American Plate, pushing up the Andes Mountains along the western edge of South America. Earthquakes happen frequently where sections of the Earth?s crust collide, and Chile is particularly prone to geologic activity. The same conditions that give rise to earthquakes have also produced some 620 volcanoes throughout the country. The June 13 earthquake occurred east of the plate?s surface boundary, near the base of the Cordillera Occidental, a range of the Andes. The quake was centered deep in the Earth, 119 kilometers (74 miles) from the surface, where the land is being forced up by the now subducted Nazca Plate. This topographical image was created using data from the Shuttle Radar Topography Mission (SRTM) [ http://www2.jpl.nasa.gov/srtm/ ]. SRTM was designed to collect three-dimensional measurements of the Earth?s surface using a radar instrument that flew aboard the Space Shuttle Endeavour in February 2000. To read more about this earthquake, please visit the United States Geological Survey?s Earthquake Hazards Program [ http://earthquake.usgs.gov/eqinthenews/2005/uszgbu/ ]. NASA image created by Jesse Allen, Earth Observatory, using Shuttle Radar Topography (SRTM) elevation data obtained from the University of Maryland?s Global Land Cover Facility.
Earthquake in Sulawesi
Title Earthquake in Sulawesi
Description In the quiet of the earliest hours of the morning on January 24, 2005, a magnitude 6.2 earthquake rattled Palu, Sulawesi, killing one and injuring four others. The earthquake was centered approximately 35 kilometers (20 miles) south of Palu, 10 kilometers (6.2 miles) beneath the surface. Located in the center of the arc of islands that forms Indonesia, Sulawesi is at the heart of one of the most geologically active regions in the world. The effect of millennia of shifting ground on the island is readily apparent in this elevation image, created using data from the Shuttle Radar Topography Mission (SRTM). SRTM was designed to collect three-dimensional measurements of the Earth's surface using a radar instrument that flew aboard the Space Shuttle Endeavour in February 2000. In the above image, the highest elevations are white and pink, while low elevations are green. Two mountain ranges run north-south from the center of the island to the shore. Between the two ranges, a finger of green marks out a straight valley that was formed by the fault. As this image reveals, the January 24 earthquake was centered just a few kilometers west of this fault. Like the San Andreas fault, Sulawesi's fault is a transform fault formed when two tectonic plates slide past one another. Indonesia sits on top of three major tectonic plates—giant slabs of the Earth's crust that float on the planet's molten core. The majority of the islands in the nation sit on the Eurasian plate, caught between the north-moving Australian plate, and the west-moving Pacific plate. Around Sulawesi, three smaller plates clash, adding to the seismic activity. All of this jostling between plates leads to frequent earthquakes and active volcanoes, Indonesia has more historically active volcanoes (76) than any other region on Earth. NASA image created by Jesse Allen, Earth Observatory, using SRTM data obtained from the Global Land Cover Facility.
Eruption of Sicily's Mt. Etn …
Title Eruption of Sicily's Mt. Etna
Description Italy?s Mount Etna is the focus of this 3-D perspective view made from data collected by the Advanced Spaceborne Thermal and Emission Radiometer (ASTER), flying aboard NASA?s Terra spacecraft, and overlaid on Shuttle Radar Topography Mission (SRTM) topography. The image is looking south with dark lava flows from the 1600s (center) to 1981 (long flow at lower right) visible in the foreground and the summit of Etna above. The city of Catania is barely visible behind Etna on the bay at the upper left. In late October 2002, Etna erupted again, sending lava flows down the south and east sides of the volcano, out of sight in this view. In addition to the terrestrial applications of these data for understanding active volcanoes and hazards associated with them such as lava flows and explosive eruptions, geologists studying Mars find these data useful as an analog to martian landforms and geologic processes. In late September 2002, a field conference with the theme of Terrestrial Analogs to Mars focused on Mount Etna, allowing Mars geologists to see in person the types of features they can only sample remotely. Elevation data used in this image was acquired by SRTM aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA?s Jet Propulsion Laboratory, Pasadena, Calif., for NASA?s Earth Science Enterprise, Washington, D.C. Size: Varies across scene Location: 38 degrees North latitude, 15.5 degrees East longitude Orientation: Looking south Image Data: ASTER bands 2, 3, 1 as red, green, blue, respectively. Original Data Resolution: SRTM 1 arc-second (30 meters or 98 feet) Date Acquired: February 2000 (SRTM), July 29, 2001 (ASTER) Image courtesy ASTER and SRTM Teams, NASA?s Jet Propulsion Laboratory
Eruption of Sicily's Mt. Etn …
Title Eruption of Sicily's Mt. Etna
Description Italy?s Aeolian Islands and Mount Etna are the focus of this 3-D perspective view made from an Advanced Spaceborne Thermal and Emission Radiometer (ASTER) image from NASA?s Terra spacecraft and overlaid on Shuttle Radar Topography Mission (SRTM) topography. The image is looking south with the islands of Lipari and Vulcano in the foreground and Etna with its dark lava flows on the skyline. Vulcano also hosts an active volcano, the cone of which is prominent. In late October 2002, Etna erupted again, sending lava flows down the south and east sides of the volcano, out of sight in this view. In addition to the terrestrial applications of these data for understanding active volcanoes and hazards associated with them such as lava flows and explosive eruptions, geologists studying Mars find these data useful as an analog to martian landforms and geologic processes. In late September 2002, a field conference with the theme of Terrestrial Analogs to Mars focused on Mount Etna allowing Mars geologists to see in person the types of features they can only sample remotely. Elevation data used in this image was acquired by SRTM aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth?s surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA?s Jet Propulsion Laboratory, Pasadena, Calif., for NASA?s Earth Science Enterprise, Washington, D.C. Size: Varies across scene Location: 38.25 degrees North latitude, 15 degrees East longitude Orientation: Looking south Image Data: ASTER bands 2, 3, 1 as red, green, blue, respectively. Original Data Resolution: SRTM 1 arc-second (30 meters or 98 feet) Date Acquired: February 2000 (SRTM), July 29, 2001 (ASTER) Image courtesy ASTER and SRTM Teams, NASA?s Jet Propulsion Laboratory
Mt. Pinos and the San Joaqui …
Title Mt. Pinos and the San Joaquin Valley
Description Ask any astronomer where the best stargazing site in Southern California is, and chances are they'll say Mt. Pinos. In this perspective view generated from Shuttle Radar Topography Mission [ http://earthobservatory.nasa.gov/cgi-bin/redirect?http://www.jpl.nasa.gov/srtm ] (SRTM) elevation data, the snow-capped peak is seen rising to an elevation of 2,692 meters (8,831 feet), in stark contrast to the flat agricultural fields of the San Joaquin valley seen in the foreground. Below the summit, but still well away from city lights, the Mt. Pinos parking lot at 2,468 meters (8,100 feet) is a popular viewing area for both amateur and professional astronomers and astro-photographers. For visualization purposes, topographic heights displayed in this image are exaggerated two times. The elevation data used in this image was acquired by SRTM aboard the Space Shuttle Endeavour, launched on February 11, 2000. Distance to Horizon: 176 kilometers (109 miles) Location: 34.83 deg. North lat., 119.25 deg. West lon. View: Toward the Southwest Date Acquired: February 16, 2000 (SRTM), December 14, 1984 (Landsat) Image courtesy NASA/JPL/NIMA
Mt. Ruapehu, New Zealand
Title Mt. Ruapehu, New Zealand
Description All around the world, people live in places where the threat of natural disaster is high. On the North Island of New Zealand, the Mount Ruapehu volcano is just such a threat. A towering, active stratovolcano (the classic cone-shaped volcano), snow-capped Ruapehu Volcano is pictured in this enhanced-color image. The image is made from topography data collected by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on February 11, 2000, and imagery collected by the Landsat satellite on October 23, 2002. Ruapehu is one of New Zealand?s most active volcanoes, with ten eruptions since 1861. The eruptions aren?t the only threat from the volcano, however. Among the most serious threats is a volcanic mudflow called a lahar. In between eruptions, a lake forms in the volcano?s caldera from melting snow. If a previous eruption has deposited a dam of ash, rocks and mud in the lake?s natural overflow point, then the lake becomes dangerously full, held back only by the temporary dam. In this scene, the lake is nestled among the ridges at the top of the volcano. Eventually, the dam gives way and a massive flow of mud and debris churns down the mountain toward farmland and towns below. Scientists estimate that Ruapehu has experienced 60 lahars in the last 150 years. A devastating lahar in 1953 killed more than 150 people, who died when a passenger train plunged into a ravine when a railroad bridge was taken out by the lahar. The flank of the volcano below the lake is deeply carved by the path of previous lahars, the gouge can be seen just left of image center. Currently scientists in the region are predicting that the lake will overflow in a lahar sometime in the next year. There is great controversy about how to deal with the threat. News reports from the region indicate that the government is planning to invest in a high-tech warning system that will alert those who might be affected well in advance of any catastrophic release. Others feel that the government should combat the threat through engineering at the top of the mountain, for example, by undertaking a controlled release of the lake. Landsat data provided courtesy of the University of Maryland Global Land Cover Facility [ http://glcf.umiacs.umd.edu/index.shtml ] Landsat processing by Laura Rocchio, Landsat Project Science Office SRTM 3-arcsecond elevation data courtesy of SRTM Team [ http://www2.jpl.nasa.gov/srtm/ ] NASA/JPL/NIMA Visualization created by Earth Observatory staff.
Perspective View, Mount Shas …
Title Perspective View, Mount Shasta, California
Description At more than 4,300 meters (14,000 feet ), Mount Shasta is California?s tallest volcano and part of the Cascade chain of volcanoes extending south from Washington. This computer-generated perspective viewed from the west also includes Shastina, a slightly smaller volcanic cone left of Shasta?s summit and Black Butte, another volcano in the right foreground. This 3-D perspective view was generated using topographic data from the Shuttle Radar Topography Mission [ http://earthobservatory.nasa.gov/cgi-bin/redirect?http://www.jpl.nasa.gov/srtm/ ] (SRTM) and an enhanced color Landsat 5 satellite image. Topographic expression is exaggerated two times. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter (98-foot) resolution of most Landsat images and will substantially help in analyzing the large and growing Landsat image archive. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. Size: scale varies in this perspective image Location: 41.4 deg. North lat., 122.3 deg. West lon. Orientation: looking east Image Data: Landsat Bands 3,2,1 as red, green, blue, respectively Original Data Resolution: SRTM 1 arcsecond (30 meters or 98 feet), Thematic Mapper 1 arcsecond (30 meters or 98 feet) Date Acquired: February 2000 (SRTM) For more information, read: Pictures from the Real Edge: NASA Posts U.S. Topography Data [ http://earthobservatory.nasa.gov/cgi-bin/redirect?http://www.jpl.nasa.gov/releases/2002/release_2002_19.html ]. Image Credit: NASA/JPL/NIMA
Perspective View: San Diego, …
Title Perspective View: San Diego, California
Description The influence of topography on the growth of the city of San Diego is seen clearly in this computer-generated perspective viewed from the south. The Peninsular Ranges to the east of the city have channeled development of the cities of La Mesa and El Cajon, which can be seen just above the center of the image. San Diego itself clusters around the bay enclosed by Point Loma and Coronado Island. In the mountains to the right, Lower Otay Lake and Sweetwater Reservoir show up as dark patches. This 3-D perspective view was generated using topographic data from the Shuttle Radar Topography Mission (SRTM) and an enhanced color Landsat 5 satellite image. Topographic expression is exaggerated two times. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter (98-foot) resolution of most Landsat images and will substantially help in analyzing the large and growing Landsat image archive. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth?s surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. Size: scale varies in this perspective image Location: 32.6 deg. North lat., 117.1 deg. West lon. Orientation: looking north Image Data: Landsat Bands 3, 2, 1 as red, green, blue, respectively Original Data Resolution: SRTM 1 arcsecond (30 meters or 98 feet), Thematic Mapper 1 arcsecond (30 meters or 98 feet) Date Acquired: February 2000 (SRTM) Image Courtesy SRTM Team [ http://earthobservatory.nasa.gov/cgi-bin/redirect?http://www.jpl.nasa.gov/srtm/ ] NASA/JPL/NIMA
Orbiter Endeavour is prepare …
Title Orbiter Endeavour is prepared in VAB for stacking
Description As the orbiter Endeavour hangs suspended from a crane inside the Vehicle Assembly Building, workers make adjustments on it before it is lifted and stacked with its external tank and solid rocket boosters. The stack is in high bay 1. Space Shuttle Endeavour is scheduled to be launched Nov. 30 on mission STS-97, the sixth construction flight to the International Space Station.
Date 10.25.2000
Orbiter Endeavour is prepare …
Title Orbiter Endeavour is prepared in VAB for stacking
Description Viewed from behind, the tiles on the bottom of orbiter Endeavour can be seen. The orbiter hangs suspended from a crane inside the Vehicle Assembly Building before being lifted into high bay 1 and stacked with its external tank and solid rocket boosters. Space Shuttle Endeavour is scheduled to be launched Nov. 30 on mission STS-97, the sixth construction flight to the International Space Station.
Date 10.25.2000
Orbiter Endeavour is prepare …
Title Orbiter Endeavour is prepared in VAB for stacking
Description The orbiter Endeavour hangs suspended from a crane inside the Vehicle Assembly Building. It will be lifted into high bay 1 and stacked with its external tank and solid rocket boosters. Space Shuttle Endeavour is scheduled to be launched Nov. 30 on mission STS-97, the sixth construction flight to the International Space Station.
Date 10.25.2000
Closeup of the cracked cleat …
Title Closeup of the cracked cleat on the crawler-transporter
Description A yellow tag identifies the crawler-transporter cleat that has a crack. The crack was noticed as the crawler-transporter was moving Space Shuttle Endeavour to Launch Pad 39B. Rollout was delayed until the cleat could be replaced. The Space Shuttle was hard down on the pad several hours later. Endeavour is scheduled to be launched Nov. 30 at 10:01 p.m. EST on mission STS-97, the sixth construction flight to the International Space Station. Its payload includes the P6 Integrated Truss Structure and a photovoltaic (PV) module, with giant solar arrays that will provide power to the Station. The mission includes two spacewalks to complete the solar array connections.
Date 10.31.2000
SRTM Anaglyph: Haro and Kas …
Title SRTM Anaglyph: Haro and Kas Hills
Description On January 26, 2001 the Kachchh region in western India suffered the most deadly earthquake in India's history. This three-dimensional view of landforms northeast of the city of Bhuj depicts geologic structures that are of interest in the study the tectonic processes that may have led to that earthquake. However, preliminary field studies indicate that these structures are composed of Mesozoic rocks that are overlain by younger rocks showing little deformation. Thus these structures may be old, not actively growing, and not directly related to the recent earthquake. The Haro Hills are on the left and the Kas Hills are on the right. The Haro Hills are an "anticline," which is an upwardly convex elongated fold of layered rocks. The anticline is distinctly ringed by an erosion resistant layer of sandstone. The east-west orientation of the anticline may relate to the crustal compression that has occurred during India's northward movement toward, and collision with, Asia. In contrast, the largest of the Kas Hills appears to be a tilted (to the south) and faulted (on the north) block of layered rocks. Also seen here, the curvilinear ridge trending toward the southwest from the image center is an erosion resistant "dike," which is an igneous intrusion into older "host" rocks along a fault plane or other crack. The dike also appears to extend northeast from the image center as a dark line having very little topography. Its location between the tilted block and a smaller anticline to the north (directly east of the larger anticline) probably indicates that the dike fills the fault that separates these contrasting geologic structures. These features are simple examples of how digital elevation data can stereoscopically enhance satellite imagery to provide a direct input to geologic studies. The stereoscopic effect of this anaglyph was created by first draping a Landsat satellite image (taken just two weeks after the earthquake) over preliminary digital elevation data from the Shuttle Radar Topography Mission (SRTM), and then generating two differing perspectives, one for each eye. When viewed through special glasses, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Anaglyph glasses cover the left eye with a red filter and cover the right eye with a blue filter. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center, Sioux Falls, South Dakota. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11,2000. SRTM used the same radar instrument that comprised, the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense(DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise,Washington, DC. Size: 22.3 x 14.3 kilometers ( 13.8 x 8.9 miles) Location: 23.4 deg. North lat., 69.8 deg. East lon. Orientation: North toward the top Image Data: Landsat Band 3 Date Acquired: February 2000 (SRTM), February 9, 2001 (Landsat)
Date 05.02.2001
SRTM Anaglyph: Roads versus …
Title SRTM Anaglyph: Roads versus Dikes near Bhuj, India
Description (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise,Washington, DC. Size: 13.8 x 9.6 kilometers ( 8.6 x 5.9 miles) Location: 23.2 deg. North lat., 69.8 deg. East lon. Orientation: North toward the top Image Data: Landsat Panchromatic Band (visible and near infrared) Date Acquired: February 2000 (SRTM), February 9, 2001 (Landsat), These two images are two-dimensional (top) and three-dimensional (bottom)views of the same area, southeast of Bhuj, India. Together they demonstrate how NASA's Shuttle Radar Topography Mission(SRTM) elevation models can be used to help in the interpretation of satellite imagery. The image was acquired by the Landsat 7 satellite. The top view is a standard panchromatic (visible and near infrared) satellite picture. The bottom view is the same scene projected into an anaglyph, based upon SRTM data. Anaglyphs are generated by creating two differing perspectives of a single satellite image, one perspective for each eye. Note that there are several dark lines crossing parts of the image. Some of these lines are roads but some are geologic dikes. Dikes are sheet-like rocks formed when volcanic fluids intrude cracks in older host rocks. The intersections of these "sheets" with the topographic surface appear as linear or curvilinear traces across the terrain. The dikes traverse varied terrains and they intersect each other - much like roads. In the two dimensional view, roads and dikes are confusingly similar in appearance. However, in three dimensions, dikes can be seen to be ridge-forming features and geographically related to other geologic features (left and lower right of image). In contrast, roads generally traverse less rugged terrain and pass through ridge gaps(upper right and left center of image). Thus the added topographic information provided by SRTM greatly helps in the image interpretation. The stereoscopic effect of this anaglyph was created by first draping a Landsat satellite image (taken just two weeks after the earthquake) over preliminary digital elevation data from the Shuttle Radar Topography Mission (SRTM), and then generating two differing perspectives, one for each eye. When viewed through special glasses, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Anaglyph glasses cover the left eye with a red filter and cover the right eye with a blue filter. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter(33-yard) resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center, Sioux Falls, South Dakota. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long
Date 05.24.2001
SRTM Colored and Shaded Topo …
Title SRTM Colored and Shaded Topography: Haro and Kas Hills, India
Description On January 26, 2001, the Kachchh region in western India suffered the most deadly earthquake in India's history. This shaded topography view of landforms northeast of the city of Bhuj depicts geologic structures that are of interest in the study the tectonic processes that may have led to that earthquake. However, preliminary field studies indicate that these structures are composed of Mesozoic rocks that are overlain by younger rocks showing little deformation. Thus these structures may be old, not actively growing, and not directly related to the recent earthquake. The Haro Hills are on the left and the Kas Hills are on the right. The Haro Hills are an "anticline," which is an upwardly convex elongated fold of layered rocks. In this view, the anticline is distinctly ringed by an erosion resistant layer of sandstone. The east-west orientation of the anticline may relate to the crustal compression that has occurred during India's northward movement toward, and collision with, Asia. In contrast, the largest of the Kas Hills appears to be a tilted (to the south) and faulted (on the north) block of layered rocks. Also seen here, the linear feature trending toward the southwest from the image center is an erosion-resistant "dike," which is an igneous intrusion into older "host" rocks along a fault plane or other crack. These features are simple examples of how shaded topography can provide a direct input to geologic studies. In this image, colors show the elevation as measured by the Shuttle Radar Topography Mission (SRTM). Colors range from green at the lowest elevations, through yellow and red, to purple at the highest elevations. Elevations here range from near sea level to about 300 meters (about 1000 feet). Shading has been added, with illumination from the north (image top). Elevation data used in this image was acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense(DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise,Washington, DC. Size: 26.3 x 16.6 kilometers ( 16.3 x 10.3 miles) Location: 23.4 deg. North lat., 69.8 deg. East lon. Orientation: North toward the top Date Acquired: February 2000
Date 04.12.2001
SRTM Perspective View with L …
Title SRTM Perspective View with Landsat Overlay: Bhuj and Anjar, India
Description Science Enterprise,Washington, DC. Size: scale varies in this perspective image Location: 23.4 deg. North lat., 69.8 deg. East lon. Orientation: looking East Image Data: Landsat Bands 5, 4, 3 as red, green, blue respectively Original Data Resolution: SRTM 30 meters (99 feet) Date Acquired: four days in February, 2000 (SRTM), February 9, 2001 (Landsat), This perspective view shows the city of Bhuj, India, in the foreground near the right side (dark gray area). Bhuj and many other towns and cities nearby were almost completely destroyed by the January 26, 2001, earthquake in western India. This magnitude 7.6 earthquake was the deadliest in the history of India with some 20,000 fatalities and over a million homes damaged or destroyed. The epicenter of the earthquake was in the area in the upper left corner of this view. The city of Anjar is in the dark gray area near the top center of the image. Anjar was previously damaged by a magnitude 6.1 earthquake in 1956 that killed 152 people and suffered again in the larger 2001 earthquake. The red hills to the left of the center of the image are the Has and Karo Hills, which reach up to 300 meter (900 feet) elevation. These hills are formed by folded red sandstone layers. Geologists are studying these folded layers to determine if they are related to the fault that broke in the 2001 earthquake. The city of Bhuj was the historical capital of the Kachchh region. Highways and rivers appear as dark lines. Vegetation appears bright green in this false-color Landsat image. The Gulf of Kachchh (or Kutch) is the blue area in the upper right corner of the image, and the gray area on the left side of the image is called the Banni plains. This three-dimensional perspective view was generated using topographic data from the Shuttle Radar Topography Mission (SRTM) and an enhanced false-color Landsat 7 satellite image. Colors are from Landsat bands 5, 4, and 2 as red, green and blue, respectively. Topographic expression is exaggerated 5X. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM by the United States Geological Survey, Earth Resources Observation Systems(EROS) Data Center, Sioux Falls, South Dakota. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11,2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense(DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth
Date 04.12.2001
SRTM Perspective View with L …
Title SRTM Perspective View with Landsat Overlay: Mt. Pinos, California
Description Prominently displayed in this image, Mt. Pinos, at 2,692 meters (8,831 feet) is the highest peak in the Los Padres National Forest. Named for the mantle of pine trees covering its slopes and summit, it offers one of the best stargazing sites in Southern California. Shuttle Radar Topography Mission (SRTM) elevation data were combined with Landsat data to generate this perspective view looking toward the northwest. Not only is the mountain popular with astronomers and astro-photographers, it is also popular for hiking trails and winter sports. The broad low relief area in the right foreground is Cuddy Valley. Cuddy Valley Road is the bright line on the right (north)side of the valley. Just to the left and paralleling the road is a scarp (cliff) formed by the San Andreas fault. The fault slices through the mountains here and then bends and continues onto the Carrizo Plain (right center horizon). This entire segment of the San Andreas fault broke in a major earthquake in 1857. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data match the 30-meter(98-foot) resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. For visualization purposes, topographic heights displayed in this image are exaggerated two times. Colors approximate natural colors. The elevation data used in this image was acquired by SRTM aboard Space Shuttle Endeavour, launched on February 11,2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of Earth's land surface. To collect the 3-D SRTM data, engineers added a mast 60 meters (about 200 feet)long, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense, and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. Distance to Horizon: 176 kilometers (109 miles) Location: 34.8 deg. North lat., 119.1 deg. West lon. View: Toward the Northwest Date Acquired: February 16, 2000 SRTM, December 14, 1984 Landsat
Date 05.18.2001
SRTM Perspective View with L …
Title SRTM Perspective View with Landsat Overlay: Rann of Kachchh, India
Description The earthquake that struck western India on January 26,2001, was the country's strongest in the past 50 years. This perspective view shows the area of the earthquake's epicenter in the lower left corner. The southern Rann of Kachchh appears in the foreground. The Rann is an area of low-lying salt flats that shows up with various shades of white and blue in this false-color Landsat image. The gray area on the middle of the image is called the Banni plains. The darker blue spots and curving lines in the Rann and the Banni plains are features that appeared after the January earthquake. Their true colors are shades of white and gray, but the infrared data used in the image gives them a blue or turquoise color. These features are the effects of liquefaction of wet soil, sand and mud layers caused by the shaking of the earthquake. The liquefaction beneath the surface causes water to be squeezed out at the surface forming mud volcanoes, sand blows and temporary springs. Some of the residents of this dry area were hopeful that they could use the water, but they found that the water was too salty in almost every place where it came to the surface. The city of Bhuj, India, appears as a gray area in the upper right of the image. Bhuj and many other towns and cities nearby were almost completely destroyed by the January 2001 earthquake. This magnitude 7.7 earthquake was the deadliest in the history of India with some 20,000 fatalities and over a million homes damaged or destroyed. The city of Bhuj was the historical capital of the Kachchh region. Highways and rivers appear as dark lines. Vegetation appears bright green in this false-color Landsat image. The city of Anjar is in the dark gray area near the upper left of the image. Previously damaged by a magnitude 6.1 earthquake in 1956 that killed 152people, Anjar suffered again in the larger 2001 earthquake. The red hills in the center of the image are the Has and Karo Hills, which reach up to 300 m (900 feet) elevation. Geologists are studying the folded red sandstone layers that form these hills to determine if they are related to the fault that broke in the 2001 earthquake. This three-dimensional perspective view was generated using topographic data from the Shuttle Radar Topography Mission (SRTM) and an enhanced false-color Landsat 7 satellite image. Colors are from Landsat bands 5, 4, and 2 as red, green and blue, respectively. Topographic expression is exaggerated 5X. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM by the United States Geological Survey, Earth Resources Observation Systems(EROS) Data Center, Sioux Falls, South Dakota. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard, the Space Shuttle Endeavour, launched on February 11,2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration(NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC. Size: scale varies in this perspective image Location: 23.5 deg. North lat., 69.9 deg. East lon. Orientation: looking Southwest Image Data: Landsat Bands 5, 4, 3 as red, green, blue respectively Original Data Resolution: SRTM 30 meters (99 feet), Landsat 30 meters Date Acquired: four days in February, 2000 (SRTM), February 9, 2001 (Landsat)
Date 04.26.2001
SRTM Perspective View with L …
Title SRTM Perspective View with Landsat Overlay: Santa Barbara Coastline, California
Description This image of the Santa Barbara, California, region provides a beautiful snapshot of the area's rugged mountains and long and varied coastline. Generated using data acquired from the Shuttle Radar Topography Mission (SRTM) and an enhanced Landsat image this is a perspective view toward the northeast, from the Goleta Valley in the foreground to a snow-capped Mount Abel (elevation 2,526 m or 8,286 feet) along the skyline at the left. On a clear day, a pilot might see a similar view shortly before touching down on the east-west runway of the Santa Barbara Airport, seen just to the left of the coastline near the center of image. This area is one of the few places along the U.S. West Coast where because of a south-facing beach, fall and winter sunrises occur over the ocean. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data match the 30-meter(98-foot) resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. For visualization purposes, topographic heights displayed in this image are exaggerated two times. Colors approximate natural colors. The elevation data used in this image was acquired by SRTM aboard Space Shuttle Endeavour, launched on February 11,2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of Earth's land surface. To collect the 3-D SRTM data, engineers added a mast 60 meters (about 200-feet)long, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense, and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif, for NASA's Earth Science Enterprise, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. Location: 34.5 deg. North lat., 119.75 deg. West lon. View: Northeast Scale: Scale Varies in this Perspective Date Acquired: February 16, 2000 SRTM, December 14, 1984 Landsat
Date 05.18.2001
SRTM Stereo Pair: Haro and K …
Title SRTM Stereo Pair: Haro and Kas Hills, India
Description February 11,2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense(DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise,Washington, DC. Size: 22.3 x 14.3 kilometers ( 13.8 x 8.9 miles) Location: 23.4 deg. North lat., 69.8 deg. East lon. Orientation: North toward the top Image Data: Landsat Bands 1, 2+4, 3 as blue, green, red, respectively Date Acquired: February 2000 (SRTM), February 9, 2001 (Landsat), On January 26, 2001 the Kachchh region in western India suffered the most deadly earthquake in India's history. This stereoscopic view of landforms northeast of the city of Bhuj depicts geologic structures that are of interest in the study the tectonic processes that may have led to that earthquake. However, preliminary field studies indicate that these structures are composed of Mesozoic rocks that are overlain by younger rocks showing little deformation. Thus these structures may be old, not actively growing, and not directly related to the recent earthquake. The Haro Hills are on the left and the Kas Hills are on the right. The Haro Hills are an "anticline," which is an upwardly convex elongated fold of layered rocks. The anticline is distinctly ringed by an erosion resistant layer of sandstone. The east-west orientation of the anticline may relate to the crustal compression that has occurred during India's northward movement toward, and collision with, Asia. In contrast, the largest of the Kas Hills appears to be a tilted (to the south) and faulted (on the north) block of layered rocks. Also seen here, the curvilinear ridge trending toward the southwest from the image center is an erosion resistant "dike," which is an igneous intrusion into older "host" rocks along a fault plane or other crack. The dike also appears to extend northeast from the image center as a dark line having very little topography. Its location between the tilted block and a smaller anticline to the north (directly east of the larger anticline) probably indicates that the dike fills the fault that separates these contrasting geologic structures. These features are simple examples of how digital elevation data can stereoscopically enhance satellite imagery to provide a direct input to geologic studies. This stereoscopic image was generated by draping a Landsat satellite image(taken just two weeks after the earthquake) over a preliminary Shuttle Radar Topography Mission (SRTM) elevation model. Two differing perspectives were then calculated, one for each eye. They can be seen in 3-D by viewing the left image with the right eye and the right image with the left eye (cross-eyed viewing), or by downloading and printing the image pair and viewing them with a stereoscope. When stereoscopically merged, the result is a vertically exaggerated view of the Earth's surface in its full three dimensions. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter resolution of most Landsat images and will substantially help in analyses of the large and growing Landsat image archive. The Landsat 7 Thematic Mapper image used here was provided to the SRTM project by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center, Sioux Falls, South Dakota. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on
Date 05.02.2001
STS-108 backup crew member P …
Title STS-108 backup crew member Padalka in an M-113
Description KENNEDY SPACE CENTER, Fla. -- Joining the STS-108 crew and Expedition 4 crew, cosmonaut Gennadi Padalka is ready to practice driving an M-113 armored personnel carrier. Padalka completed training in 2000 for a space flight on Soyuz-TM transport vehicle as a commander of an ISS contingency crew and is part of a backup crew for the Expedition 4. STS-108 is a Utilization Flight that will carry the replacement Expedition 4 crew to the International Space Station, as well as the Multi-Purpose Logistics Module Raffaello, filled with supplies and equipment. The l1-day mission is scheduled for launch Nov. 29 on Space Shuttle Endeavour.
Date 11.07.2001
STS-97 Endeavour rolls back …
Title STS-97 Endeavour rolls back from Launch Pad 39B
Description Space Shuttle Endeavour approaches the incline to Launch Pad 39B, where the Rotating and Fixed Service Structures can be seen in the background to the left. Moments after this photo was taken, workers noticed one of the crawler-transporter cleats was cracked and rollout was delayed until the cleat could be replaced. The Space Shuttle was hard down on the pad several hours later. Endeavour is scheduled to be launched Nov. 30 at 10:01 p.m. EST on mission STS-97, the sixth construction flight to the International Space Station. Its payload includes the P6 Integrated Truss Structure and a photovoltaic (PV) module, with giant solar arrays that will provide power to the Station. The mission includes two spacewalks to complete the solar array connections.
Date 10.31.2000
STS-97 Endeavour rolls out t …
Title STS-97 Endeavour rolls out to Launch Pad 39B
Description Space Shuttle Endeavour appears dwarfed by the structures inside the Vehicle Assembly Building as it begins rollout to Launch Pad 39B. The Shuttle rests on top of the Mobile Launcher Platform (MLP). Underneath (bottom of photo) is the crawler-transporter that will move the Shuttle and MLP to the pad on four double- tracked crawlers. The maximum speed of the loaded transporter is 1 mph. Endeavour is scheduled to be launched Nov. 30 at 10:01 p.m. EST on mission STS-97, the sixth construction flight to the International Space Station. Its payload includes the P6 Integrated Truss Structure and a photovoltaic (PV) module, with giant solar arrays that will provide power to the Station. The mission includes two spacewalks to complete the solar array connections.
Date 10.31.2000
STS-97 Endeavour rolls out t …
Title STS-97 Endeavour rolls out to Launch Pad 39B
Description Space Shuttle Endeavour is ready to move from the Vehicle Assembly Building into the light of early morning on its rollout to Launch Pad 39B. The Space Shuttle sits atop the Mobile Launcher Platform (MLP). Endeavour is scheduled to be launched Nov. 30 at 10:01 p.m. EST on mission STS-97, the sixth construction flight to the International Space Station. Its payload includes the P6 Integrated Truss Structure and a photovoltaic (PV) module, with giant solar arrays that will provide power to the Station. The mission includes two spacewalks to complete the solar array connections.
Date 10.31.2000
STS-97 Endeavour rolls out t …
Title STS-97 Endeavour rolls out to Launch Pad 39B
Description Space Shuttle Endeavour inches its way to Launch Pad 39B via the crawlerway that leads from the Vehicle Assembly Building. The Shuttle is on the Mobile Launcher Platform (MLP) which is atop the crawler-transporter, moving on four double-tracked crawlers. The maximum speed of the loaded transporter is 1 mph. To the left and right of the Space Shuttle can be seen both launch pads, 39B and 39A respectively. Endeavour is scheduled to be launched Nov. 30 at 10:01 p.m. EST on mission STS-97, the sixth construction flight to the International Space Station. Its payload includes the P6 Integrated Truss Structure and a photovoltaic (PV) module, with giant solar arrays that will provide power to the Station. The mission includes two spacewalks to complete the solar array connections.
Date 10.31.2000
STS-97 Endeavour rolls out t …
Title STS-97 Endeavour rolls out to Launch Pad 39B
Description Viewed from across the turn basin at KSC, Space Shuttle Endeavour inches its way to Launch Pad 39B via the crawlerway that leads from the Vehicle Assembly Building. The Shuttle is on the Mobile Launcher Platform (MLP) which is atop the crawler-transporter, moving on four double-tracked crawlers. The maximum speed of the loaded transporter is 1 mph. Endeavour is scheduled to be launched Nov. 30 at 10:01 p.m. EST on mission STS-97, the sixth construction flight to the International Space Station. Its payload includes the P6 Integrated Truss Structure and a photovoltaic (PV) module, with giant solar arrays that will provide power to the Station. The mission includes two spacewalks to complete the solar array connections.
Date 10.31.2000
STS-97 Endeavour rolls out t …
Title STS-97 Endeavour rolls out to Launch Pad 39B
Description Space Shuttle Endeavour appears to be framed by palms in this view across the turn basin at KSC. Endeavour is inching its way to Launch Pad 39B via the crawlerway that leads from the Vehicle Assembly Building. The Shuttle is on the Mobile Launcher Platform (MLP) which is atop the crawler-transporter, moving on four double-tracked crawlers. The maximum speed of the loaded transporter is 1 mph. Endeavour is scheduled to be launched Nov. 30 at 10:01 p.m. EST on mission STS-97, the sixth construction flight to the International Space Station. Its payload includes the P6 Integrated Truss Structure and a photovoltaic (PV) module, with giant solar arrays that will provide power to the Station. The mission includes two spacewalks to complete the solar array connections.
Date 10.31.2000
STS-99 crew exits the O&C en …
Title STS-99 crew exits the O&C enroute to Launch Pad 39A
Description The STS-99 crew wave to onlookers as they walk to the astrovan which will take them to Launch Pad 39A and liftoff of Space Shuttle Endeavour, targeted for 12:47 p.m. EST. In their orange launch and entry suits, they are (foreground) Pilot Dominic Gorie and Commander Kevin Kregel. Behind them (left to right) are Mission Specialists Janice Voss (Ph.D.), Mamoru Mohri (Ph.D.), Gerhard Thiele and Janet Lynn Kavandi (Ph.D.). Mohri is with the National Space Development Agency (NASDA) of Japan, and Thiele is with the European Space Agency. The SRTM will chart a new course to produce unrivaled 3-D images of the Earth's surface, using two antennae and a 200-foot-long section of space station-derived mast protruding from the payload bay. The result of the Shuttle Radar Topography Mission could be close to 1 trillion measurements of the Earth's topography. Besides contributing to the production of better maps, these measurements could lead to improved water drainage modeling, more realistic flight simulators, better locations for cell phone towers, and enhanced navigation safety. The mission is expected to last about 11days, with Endeavour landing at KSC Friday, Feb. 11, at 4:55 p.m. EST.
Date 01.31.2000
Madre de Dios Watershed: Ima …
nasa, nasaimageofthedaygalle …
For conservation biologists, …
ge_07394
mediatype IMAGE
mediatype image
date 2000
creator NASA -- NASA image created by Jesse Allen, using data provided courtesy of the www.wwf.org/ World Wildlife Fund HydroSHEDS Project. Thanks to Bernhard Lehner, McGill University, Robin Abell, World Wildlife Fund, and Ned Gardiner, American Museum of Natural History, for image interpretation.
identifier ge_07394
Madre de Dios Watershed: Ima …
nasa, nasaimageofthedaygalle …
For conservation biologists, …
ge_07394
mediatype IMAGE
mediatype image
date 2000
creator NASA -- NASA image created by Jesse Allen, using data provided courtesy of the www.wwf.org/ World Wildlife Fund HydroSHEDS Project. Thanks to Bernhard Lehner, McGill University, Robin Abell, World Wildlife Fund, and Ned Gardiner, American Museum of Natural History, for image interpretation.
identifier ge_07394
Madre de Dios Watershed: Ima …
nasa, nasaimageofthedaygalle …
For conservation biologists, …
ge_07394
mediatype IMAGE
mediatype image
date 2000
creator NASA -- NASA image created by Jesse Allen, using data provided courtesy of the www.wwf.org/ World Wildlife Fund HydroSHEDS Project. Thanks to Bernhard Lehner, McGill University, Robin Abell, World Wildlife Fund, and Ned Gardiner, American Museum of Natural History, for image interpretation.
identifier ge_07394
ASTER-SRTM Perspective of Mo …
PIA02771
Sol (our sun)
ASTER, C-Band Interferometri …
Title ASTER-SRTM Perspective of Mount Oyama Volcano, Miyake-Jima Island, Japan
Original Caption Released with Image Mount Oyama is a 820-meter-high (2,700 feet) volcano on the island of Miyake-Jima, Japan. In late June 2000, a series of earthquakes alerted scientists to possible volcanic activity. On June 27, authorities evacuated 2,600 people, and on July 8 the volcano began erupting and erupted five times over that week. The dark gray blanket covering green vegetation in the image is the ash deposited by prevailing northeasterly winds between July 8 and 17. This island is about 180 kilometers (110 miles) south of Tokyo and is part of the Izu chain of volcanic islands that runs south from the main Japanese island of Honshu. Miyake-Jima is home to 3,800 people. The previous major eruptions of Mount Oyama occurred in 1983 and 1962, when lava flows destroyed hundreds of houses. An earlier eruption in 1940 killed 11 people. This image is a perspective view created by combining image data from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) aboard NASA's Terra satellite with an elevation model from the Shuttle Radar Topography Mission (SRTM). Vertical relief is exaggerated, and the image includes cosmetic adjustments to clouds and image color to enhance clarity of terrain features. The ASTER instrument is a cooperative project between NASA, JPL, and the Japanese Ministry of International Trade and Industry. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11,2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense(DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise,Washington, DC. Size: Island is approximately 8 kilometers (5 miles) in diameter Location: 34.1 deg. North lat., 139.5 deg. East lon. Orientation: View toward the west-southwest. Image Data: ASTER visible and near infrared Date Acquired: February 20, 2000 (SRTM), July 17, 2000 (ASTER) Image: NASA/JPL/NIMA/MITI
Tsunami Inundation, North of …
PIA06671
Sol (our sun)
ASTER, SIR-C/X-SAR
Title Tsunami Inundation, North of Phuket, Thailand ASTER Images and SRTM Elevation Model
Original Caption Released with Image Figure 1 The Indian Ocean coastline north of Phuket, Thailand is a major tourist destination that was in the path of the tsunami produced by a giant offshore earthquake on December 26, 2004. This disaster resulted in a heavy loss of life. These simulated natural color ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) images show a 27 kilometer (17-mile) long stretch of coast 80 kilometers (50 miles) north of the Phuket airport in the Khao Lak area on December 31 (middle) and also two years earlier (left). The changes along the coast are obvious (changing from green to grey) where the vegetation was stripped away by the tsunami. The image on the right is a copy of the later ASTER scene but it includes highlighting in red for areas that have elevations within 10 meters (33 feet) of sea level. This elevation information was supplied by the Shuttle Radar Topography Mission (SRTM). The red areas appear to include most of the tsunami inundated areas. The geographic correspondence of the imaged damage and the highlighted elevation range is quite good in the middle and upper parts of the scene and is consistent with an early field report of about 10 meters of inundation. In the south, the elevation range corresponds to a much wider area than the actual damage, but this is to be expected for areas increasingly far from the coast. Offshore bathymetry (depth variations), coastal landforms, distance from the coast, and additional factors other than elevation range control the damage extent. But elevation measurements along the coast, as provided by SRTM, give a general indication of areas at risk, as now confirmed by ASTER. ASTER images Earth to map and monitor the changing surface of our planet with its 14 spectral bands from the visible to the thermal infrared wavelength region, and its high spatial resolution of 15 to 90 meters (about 50 to 300 feet). These data provide scientists in numerous disciplines with critical information for surface mapping, and monitoring of dynamic conditions and temporal change. Example applications are: monitoring glacial advances and retreats, monitoring potentially active volcanoes, identifying crop stress, determining cloud morphology and physical properties, wetlands evaluation, thermal pollution monitoring, coral reef degradation, surface temperature mapping of soils and geology, and measuring surface heat balance. ASTER is one of five Earth-observing instruments launched December 18, 1999, on NASA's Terra satellite. The instrument was built by Japan's Ministry of Economy, Trade and Industry. A joint U.S./Japan science team is responsible for validation and calibration of the instrument and the data products. The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate. Elevation data used in this image were acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour,, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Geospatial-Intelligence Agency (NGA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Science Mission Directorate, Washington, D.C. Size: 9.75 x 27.6 kilometers (6.0 x 17.1 miles), Location: 8.6 degrees North latitude, 98.3 degrees East longitude Orientation: Top is 8.25 degrees east of North Image Data: ASTER Bands 1, 2, 3 mixed for simulated true color. Date Acquired: November 15, 2002 and December 31, 2004 (ASTER), February 2000 (SRTM)
Tsunami Inundation, North of …
PIA06671
Sol (our sun)
ASTER, SIR-C/X-SAR
Title Tsunami Inundation, North of Phuket, Thailand ASTER Images and SRTM Elevation Model
Original Caption Released with Image Figure 1 The Indian Ocean coastline north of Phuket, Thailand is a major tourist destination that was in the path of the tsunami produced by a giant offshore earthquake on December 26, 2004. This disaster resulted in a heavy loss of life. These simulated natural color ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) images show a 27 kilometer (17-mile) long stretch of coast 80 kilometers (50 miles) north of the Phuket airport in the Khao Lak area on December 31 (middle) and also two years earlier (left). The changes along the coast are obvious (changing from green to grey) where the vegetation was stripped away by the tsunami. The image on the right is a copy of the later ASTER scene but it includes highlighting in red for areas that have elevations within 10 meters (33 feet) of sea level. This elevation information was supplied by the Shuttle Radar Topography Mission (SRTM). The red areas appear to include most of the tsunami inundated areas. The geographic correspondence of the imaged damage and the highlighted elevation range is quite good in the middle and upper parts of the scene and is consistent with an early field report of about 10 meters of inundation. In the south, the elevation range corresponds to a much wider area than the actual damage, but this is to be expected for areas increasingly far from the coast. Offshore bathymetry (depth variations), coastal landforms, distance from the coast, and additional factors other than elevation range control the damage extent. But elevation measurements along the coast, as provided by SRTM, give a general indication of areas at risk, as now confirmed by ASTER. ASTER images Earth to map and monitor the changing surface of our planet with its 14 spectral bands from the visible to the thermal infrared wavelength region, and its high spatial resolution of 15 to 90 meters (about 50 to 300 feet). These data provide scientists in numerous disciplines with critical information for surface mapping, and monitoring of dynamic conditions and temporal change. Example applications are: monitoring glacial advances and retreats, monitoring potentially active volcanoes, identifying crop stress, determining cloud morphology and physical properties, wetlands evaluation, thermal pollution monitoring, coral reef degradation, surface temperature mapping of soils and geology, and measuring surface heat balance. ASTER is one of five Earth-observing instruments launched December 18, 1999, on NASA's Terra satellite. The instrument was built by Japan's Ministry of Economy, Trade and Industry. A joint U.S./Japan science team is responsible for validation and calibration of the instrument and the data products. The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate. Elevation data used in this image were acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour,, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Geospatial-Intelligence Agency (NGA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Science Mission Directorate, Washington, D.C. Size: 9.75 x 27.6 kilometers (6.0 x 17.1 miles), Location: 8.6 degrees North latitude, 98.3 degrees East longitude Orientation: Top is 8.25 degrees east of North Image Data: ASTER Bands 1, 2, 3 mixed for simulated true color. Date Acquired: November 15, 2002 and December 31, 2004 (ASTER), February 2000 (SRTM)
Stereo Pair with ASTER Image …
PIA03363
Sol (our sun)
C-Band Interferometric Radar
Title Stereo Pair with ASTER Image, Iturralde Structure, Bolivia
Original Caption Released with Image An 8-kilometer (5-mile) wide crater of possible impact origin is shown in this stereoscopic view of an isolated part of the Bolivian Amazon. The view is derived from an Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) satellite image and a Shuttle Radar Topography Mission (SRTM) elevation model. The circular feature covering much of the image, known as the Iturralde Structure, is possibly the Earth's most recent "big" impact event recording collision with a meteor or comet that might have occurred between 11,000 and 30,000 years ago. Although the structure was identified on satellite photographs in the mid-1980s, its location is so remote that it has only been visited by scientific investigators twice, most recently by a team from NASA's Goddard Space Flight Center in September 2002. Lying in an area of very low relief, the landform is a quasi-circular closed depression only about 20 meters (66 feet) in depth, with sharply defined sub-angular "rim" materials. It resembles a "cookie cutter" in that its appearance "cuts" the heavily vegetated soft-sediments and pampas of this part of Bolivia. The SRTM data have provided investigators with the first topographic map of the site and will allow studies of its three-dimensional structure crucial to determining whether it actually is of impact origin. This stereoscopic image was generated by first draping the ASTER satellite image over the Shuttle Radar Topography Mission digital elevation model. Two differing perspectives were then calculated, one for each eye. They can be seen in 3-D by viewing the left image with the right eye and the right image with the left eye (cross-eyed viewing) or by downloading and printing the image pair and viewing them with a stereoscope. When stereoscopically merged, the result is a vertically exaggerated view of Earth's surface in its full three dimensions. Thick vegetation in part defines the surface that the SRTM radar sees as it maps the terrain. Much of the local "topography" in this area is a measure of tree height (typically up to 13 meters, or 40 feet). This effect is easily seen here, where the ground surface relief is very low. Interpretative separation of the ground surface and vegetative features can typically be made by recognition of their characteristic patterns. However, by integrating the ASTER data into the visualization, spectral colors help the recognition of terrain features (green vegetation and blue water). The ASTER instrument is a cooperative project between NASA, JPL, and the Japanese Ministry of International Trade and Industry, and it flies aboard NASA's Terra satellite. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission aboard Space Shuttle Endeavour, launched on Feb. 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on Endeavour in 1994. The Shuttle Radar Topography, Mission was designed to collect 3-D measurements of Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense, and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C. Size: 16.3 kilometers (10.1 miles) North-South by 14.5 kilometers (9.0 miles) East-West Location: 12.6 degrees South latitude, 67.7 degrees West longitude Orientation: North at top, Latitude-Longitude projection Image: ASTER band 1,2,3 combinations as red, green, blue. Original Data Resolution: SRTM 1 arcsecond (about 30 meters or 98 feet), ASTER 15 meters (about 49 feet) Date Acquired: February 2000 (SRTM), June 29, 2001 (ASTER)
Nyiragongo volcano, Congo, P …
PIA03338
Sol (our sun)
C-Band Interferometric Radar …
Title Nyiragongo volcano, Congo, Perspective View with Lava SRTM / ASTER / Landsat
Original Caption Released with Image The Nyiragongo volcano in the Congo erupted on January 17, 2002, and subsequently sent streams of lava into the city of Goma on the north shore of Lake Kivu. More than 100 people were killed, more than 12,000 homes were destroyed, and hundreds of thousands were forced to flee the broader community of nearly half a million people. This computer-generated visualization combines a Landsat satellite image and an elevation model from the Shuttle Radar Topography Mission (SRTM) to provide a view of both the volcano and the city of Goma, looking slightly east of north. Additionally, image data from the Advanced Spaceborne Thermal Emission and reflection Radiometer (ASTER) on NASA's Terra satellite were used to supply a partial map of the recent lava flows (red), including a complete mapping of their intrusion into Goma as of January 28, 2002. Lava is also apparent within the volcanic crater and at a few other locations. Thick (but broken) cloud cover during the ASTER image acquisition prevented a complete mapping of the lava distribution, but future image acquisitions should complete the mapping. Nyiragongo is the steep volcano on the right, Lake Kivu is in the foreground, and the city of Goma has a light pink speckled appearance along the shoreline. Nyiragongo peaks at about 3,470 meters (11,380 feet) elevation and reaches almost exactly 2,000 meters (6,560 feet)above Lake Kivu. The shorter but broader Nyamuragira volcano appears in the left background. Topographic expression has been exaggerated vertically by a factor of 1.5 for this visualization. Goma, Lake Kivu, Nyiragongo, Nyamuragira and other nearby volcanoes sit within the East African Rift Valley, a zone where tectonic processes are cracking, stretching, and lowering the Earth's crust. Volcanic activity is common here, and older but geologically recent lava flows (magenta in this depiction) are particularly apparent on the flanks of the Nyamuragira volcano. The Landsat image used here was acquired on December 11, 2001, about a month before the eruption, and shows an unusually cloud-free view of this tropical terrain. Minor clouds and their shadows were digitally removed to clarify the view, topographic shading derived from the SRTM elevation model was added to the Landsat image, and a false sky was added. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter (98-foot) resolution of most Landsat images and substantially helps in analyzing the large and growing Landsat image archive. This Landsat 7 Thematic Mapper image was provided to the SRTM and ASTER projects by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center,Sioux Falls, S.D. With its 14 spectral bands from the visible to the thermal infrared wavelength region, and its high spatial resolution of 15 to 90 meters (about 50 to 300 feet), the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) will image Earth, for several years to map and monitor the changing surface of our planet. ASTER is one of five Earth-observing instruments launched December 18, 1999, on NASA's Terra satellite. The instrument was built by Japan's Ministry of Economy, Trade and Industry. A joint U.S./Japan science team is responsible for validation and calibration of the instrument and the data products. ASTER is providing scientists in numerous disciplines with critical information for surface mapping and monitoring dynamic conditions and temporal change. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission(SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA)of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C. Size: View width 21 kilometers (13 miles), View distance 42 kilometers(26 miles) Location: 1.5 degrees South latitude, 29.3 degrees East longitude Orientation: View east-northeast, 5 degrees below horizontal Image Data: Landsat Bands 3, 2, 1 as red, green, blue, respectively. ASTER Band 12(thermal) shown as red overlay. Original Data Resolution: SRTM 1 arcsecond (30 meters or 98 feet), Landsat 30 meters (98 feet). ASTER (thermal) 90 meters (295 feet). Date Acquired: February 2000 (SRTM), December 11, 2001 (Landsat), January 28, 2002(ASTER)
Nyiragongo Volcano, Congo, M …
PIA03339
Sol (our sun)
C-Band Interferometric Radar …
Title Nyiragongo Volcano, Congo, Map View with Lava, Landsat / ASTER / SRTM
Original Caption Released with Image The Nyiragongo volcano in the Congo erupted on January 17, 2002, and subsequently sent streams of lava into the city of Goma on the north shore of Lake Kivu. More than 100 people were killed, more than 12,000 homes were destroyed, and hundreds of thousands were forced to flee the broader community of nearly half a million people. This Landsat satellite image shows the volcano (right of center), the city of Goma, and surrounding terrain. Image data from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) on NASA's Terra satellite were used to supply a partial map of the recent lava flows (red overlay), including a complete mapping of their intrusion into Goma as of January 28, 2002. Lava is also apparent within the volcanic crater and at a few other locations. Thick (but broken) cloud cover during the ASTER image acquisition prevented a complete mapping of the lava distribution, but future image acquisitions should complete the mapping. Goma has a light pink speckled appearance along the shore of Lake Kivu. The city airport parallels, and is just right (east) of, the larger lava flow. Nyiragongo peaks at about 3,470 meters (11,380 feet) elevation and reaches almost exactly 2,000 meters (6,560 feet) above Lake Kivu. The shorter but much broader Nyamuragira volcano appears in the upper left. Goma, Lake Kivu, Nyiragongo, Nyamuragira and other nearby volcanoes sit within the East African Rift Valley, a zone where tectonic processes are cracking, stretching, and lowering the Earth's crust. Volcanic activity is common here, and older but geologically recent lava flows (magenta in this depiction) are particularly apparent on the flanks of the Nyamuragira volcano. The Landsat image used here was acquired on December 11, 2001, about a month before the eruption, and shows an unusually cloud-free view of this tropical terrain. Minor clouds and their shadows were digitally removed to clarify the view and topographic shading derived from the SRTM elevation model was added to the Landsat image. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter (98-foot) resolution of most Landsat images and substantially helps in analyzing the large and growing Landsat image archive. This Landsat 7 Thematic Mapper image was provided to the SRTM and ASTER projects by the United States Geological Survey, Earth Resources Observation Systems (EROS) Data Center, Sioux Falls, S.D. With its 14 spectral bands from the visible to the thermal infrared wavelength region, and its high spatial resolution of 15 to 90 meters (about 50 to 300 feet), the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) will image Earth for several years to map and monitor the changing surface of our planet. ASTER is one of five Earth-observing instruments launched December 18, 1999, on NASA's Terra satellite. The instrument was built by Japan's Ministry of Economy,Trade and Industry. A joint, U.S./Japan science team is responsible for validation and calibration of the instrument and the data products. ASTER is providing scientists in numerous disciplines with critical information for surface mapping and monitoring dynamic conditions and temporal change. Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter(approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise,Washington, D.C. Size: 21 by 42 kilometers (13 by 26 miles) Location: 1.5 degrees South latitude, 29.3 degrees East longitude Orientation: East-northeast at top Image Data: Landsat Bands 3, 2, 1 as red, green, blue, respectively. ASTER Band 12 (thermal) shown as red overlay. Original Data Resolution: Landsat 30 meters (98 feet). ASTER (thermal) 90 meters (295 feet), SRTM 1 arcsecond (30 meters or 98 feet). Date Acquired: December 11, 2001 (Landsat), January 28, 2002 (ASTER), February 2000 (SRTM).
Colored Height and Shaded Re …
PIA03364
Sol (our sun)
C-Band Interferometric Radar
Title Colored Height and Shaded Relief, Central America
Original Caption Released with Image Panama, Costa Rica, Nicaragua, El Salvador, Honduras, Guatemala, Belize, southern Mexico and parts of Cuba and Jamaica are all seen in this image from NASA's Shuttle Radar Topography Mission. The dominant feature of the northern part of Central America is the Sierra Madre Range, spreading east from Mexico between the narrow Pacific coastal plain and the limestone lowland of the Yucatan Peninsula. Parallel hill ranges sweep across Honduras and extend south, past the Caribbean Mosquito Coast to lakes Managua and Nicaragua. The Cordillera Central rises to the south, gradually descending to Lake Gatun and the Isthmus of Panama. A highly active volcanic belt runs along the Pacific seaboard from Mexico to Costa Rica. High-quality satellite imagery of Central America has, until now, been difficult to obtain due to persistent cloud cover in this region of the world. The ability of SRTM to penetrate clouds and make three-dimensional measurements has allowed the generation of the first complete high-resolution topographic map of the entire region. This map was used to generate the image. Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red, and magenta, to white at the highest elevations. For an annotated version of this image, please select Figure 1, below:(Large image: ~9 mB jpeg) Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on February 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on the Space Shuttle Endeavour in 1994. The Shuttle Radar Topography Mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (200-foot)-long mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency of the U.S. Department of Defense, and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C. Size: 1720 by 1670 kilometers (1068 by 1036 miles) Location: 14.5 degrees North latitude, 85.0 degrees West longitude Orientation: North toward the top Image Data: Shaded and colored SRTM elevation model Date Acquired: February 2000
Colored Height and Shaded Re …
PIA03364
Sol (our sun)
C-Band Interferometric Radar
Title Colored Height and Shaded Relief, Central America
Original Caption Released with Image Panama, Costa Rica, Nicaragua, El Salvador, Honduras, Guatemala, Belize, southern Mexico and parts of Cuba and Jamaica are all seen in this image from NASA's Shuttle Radar Topography Mission. The dominant feature of the northern part of Central America is the Sierra Madre Range, spreading east from Mexico between the narrow Pacific coastal plain and the limestone lowland of the Yucatan Peninsula. Parallel hill ranges sweep across Honduras and extend south, past the Caribbean Mosquito Coast to lakes Managua and Nicaragua. The Cordillera Central rises to the south, gradually descending to Lake Gatun and the Isthmus of Panama. A highly active volcanic belt runs along the Pacific seaboard from Mexico to Costa Rica. High-quality satellite imagery of Central America has, until now, been difficult to obtain due to persistent cloud cover in this region of the world. The ability of SRTM to penetrate clouds and make three-dimensional measurements has allowed the generation of the first complete high-resolution topographic map of the entire region. This map was used to generate the image. Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the north-south direction. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow, red, and magenta, to white at the highest elevations. For an annotated version of this image, please select Figure 1, below:(Large image: ~9 mB jpeg) Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on February 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on the Space Shuttle Endeavour in 1994. The Shuttle Radar Topography Mission was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (200-foot)-long mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency of the U.S. Department of Defense, and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C. Size: 1720 by 1670 kilometers (1068 by 1036 miles) Location: 14.5 degrees North latitude, 85.0 degrees West longitude Orientation: North toward the top Image Data: Shaded and colored SRTM elevation model Date Acquired: February 2000
Ireland, Shaded Relief and C …
PIA06672
Sol (our sun)
C-Band Imaging Radar, X-Band …
Title Ireland, Shaded Relief and Colored Height
Original Caption Released with Image The island of Ireland comprises a large central lowland of limestone with a relief of hills surrounded by a discontinuous border of coastal mountains which vary greatly in geological structure. The mountain ridges of the south are composed of old red sandstone separated by limestone river valleys. Granite predominates in the mountains of Galway, Mayo and Donegal in the west and north-west and in Counties Down and Wicklow on the east coast, while a basalt plateau covers much of the north-east of the country. The central plain, which is broken in places by low hills, is extensively covered with glacial deposits of clay and sand. It has considerable areas of bog and numerous lakes. The island has seen at least two general glaciations and everywhere ice-smoothed rock, mountain lakes, glacial valleys and deposits of glacial sand, gravel and clay mark the passage of the ice. Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations. Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Geospatial-Intelligence Agency (NGA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C. Location: 53.5 degrees North latitude, 8 degrees West longitude Orientation: North toward the top, Mercator projection Image Data: shaded and colored SRTM elevation model Date Acquired: February 2000
Landsat with SRTM Shaded Rel …
PIA03372
Sol (our sun)
C-Band Interferometric Radar …
Title Landsat with SRTM Shaded Relief, Los Angeles and Vicinity from Space
Original Caption Released with Image Los Angeles and vicinity seen from space, as viewed by the Landsat 7 satellite from an altitude of 437 miles on May 4, 2001. North is at the top. Topographic shading has been enhanced using an elevation data set acquired by the Space Shuttle Endeavour in February 2000. Downtown Los Angeles is just south of the image center, with L.A. and Long Beach harbors to the south, Santa Monica Bay to the west, San Fernando Valley to the northwest, San Gabriel Valley to the east, and Orange County to the southeast. The San Andreas fault forms the straight diagonal mountain front bordering the Mojave Desert at the top of the image. At full resolution, features on the ground as small as 15 meters (49 feet) across can be distinguished, including street patterns and large buildings, as well as boats and their wakes on the ocean. More than ten million people live within this scene. This image was generated by first geographically matching the Landsat scene to a Shuttle Radar Topography Mission (SRTM) elevation model. A measure of topographic slope along a southeast-northwest trend was then calculated, such that southeast facing slopes appear bright and northwest facing slopes appear dark. This slope image was then added to the enhanced Landsat scene in order to intensify the appearance of topography. Topographic shading was subtle in the original Landsat scene due to the fairly high sun angle (63 degrees above the horizon) during the satellite overflight in late morning of a mid-Spring day. Landsat has been providing visible and infrared views of the Earth since 1972. SRTM elevation data matches the 30-meter (98-foot) resolution of most Landsat images and helps in analyzing the large and growing Landsat image archive, managed by the U.S. Geological Survey (USGS). Elevation data used in this image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C. Size: 138.8 kilometers (86.1 miles) by 94.0 kilometers (58.3 miles) Location: 34.1 degrees North latitude, 118.3 degrees West longitude Orientation: North at top Image Data: Landsat bands 3, 2+4, 1 as red, green, blue, respectively, with SRTM shaded relief, plus Landsat panchromatic band 8 added for detail. Original Data, Resolution: SRTM 1 arc-second (30 meters or 98 feet), Landsat color 30 meters (98 feet) sharpened with Landsat panchromatic band (15 meters or 49 feet). Date Acquired: May 4, 2001 (Landsat), February 2000 (SRTM)
Anaglyph, North America
PIA03378
Sol (our sun)
C-Band Interferometric Radar
Title Anaglyph, North America
Original Caption Released with Image This anaglyph (stereoscopic view) of North America was generated with data from the Shuttle Radar Topography Mission (SRTM). It is best viewed at or near full resolution with anaglyph glasses. For this broad view the resolution of the data was first reduced to 30 arcseconds (about 928 meters north-south and 736 meters east-west in central North America), matching the best previously existing global digital topographic data set called GTOPO30. The data were then resampled to a Mercator projection with approximately square pixels (about one kilometer, or 0.6 miles, on each side). Even at this decreased resolution the variety of landforms comprising the North American continent is readily apparent. Active tectonics (structural deformation of the Earth's crust) along and near the Pacific North American plate boundary creates the great topographic relief seen along the Pacific coast. Earth's crustal plates converge in southern Mexico and in the northwest United States, melting the crust and producing volcanic cones. Along the California coast, the plates are sliding laterally past each other, producing a pattern of slices within the San Andreas fault system. And, where the plates are diverging, the crust appears torn apart as one huge tear along the Gulf of California (northwest Mexico), and as the several fractures comprising the Basin and Range province (in and around Nevada). Across the Great Plains, erosional patterns dominate, with stream channels surrounding and penetrating the remnants of older smooth slopes east of the Rocky Mountains. This same erosion process is exposing the bedrock structural patterns of the Black Hills in South Dakota and the Ozark Mountains in Arkansas. Lateral erosion and sediment deposition by the Mississippi River has produced the flatlands of the lower Mississippi Valley and the Mississippi Delta. To the north, evidence of the glaciers of the last ice age is widely found, particularly east of the Canadian Rocky Mountains and around the Great Lakes. From northeastern British Columbia, across Alberta, Saskatchewan, and Manitoba to North Dakota and Minnesota, huge striations clearly show the flow pattern of the glaciers. And southwest of Lakes Michigan, Huron, and Erie, arcing ridges of sediment, called terminal moraines, show where glaciers dumped sediment at their melting ends. In eastern Canada, New York, and New England, the terrain has been scoured by glaciers, and eroded by streams, particularly along fractures in the bedrock. In Labrador and Quebec, the Mistastin, Manicougan, and Clearwater Lakes meteor impact craters can also be seen. Further south, narrow curving ridges of upturned and eroded layered rocks form most of the Appalachian Mountains. In contrast, around the Caribbean Sea region (Yucatan, Florida, and the Bahamas), flat-lying, stable limestone platforms are common, while the most eastern islands of the Caribbean include active volcanoes along another convergence zone of tectonic plates. This, anaglyph was created by deriving a shaded relief image from the SRTM data, draping it back over the SRTM elevation model, and then generating two differing perspectives, one for each eye. Illumination is from the north (top). When viewed through special glasses, the anaglyph is a vertically exaggerated view of the Earth's surface in its full three dimensions. Anaglyph glasses cover the left eye with a red filter and cover the right eye with a blue filter. Elevation data used in this image were acquired by the SRTM aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C. Location: 15 to 60 degrees North latitude, 50 to 130 degrees West longitude Orientation: North toward the top, Mercator projection Image Data: Shaded SRTM elevation model Original Data Resolution: SRTM 1 arcsecond (about 30 meters or 98 feet) Date Acquired: February 2000
1 2 3 411 12
1-50 of 590