|
|
Browse All
:
S-band Antenna and International Space Station (ISS)
|
Printer Friendly |
STS-118 Launch
| Name of Image |
STS-118 Launch |
| Date of Image |
2007-08-08 |
| Full Description |
Enroute to the International Space Station (ISS), Space Shuttle Endeavor and its seven member STS-118 crew, blasted off from the launch pad at Kennedy Space Center on August 8, 2007. Construction resumed on the ISS as STS-118 mission specialists and the Expedition 15 crew completed installation of the third Starboard 5 (S-5) truss segment, removed a faulty Control Moment Gyroscope (CMG-3), installed a new CMG into the Z1 truss, relocated the S-band Antenna Sub-Assembly from the Port 6 (P6) to Port 1 (P1) truss, installed a new transponder on P1, retrieved the P6 transponder, and delivered roughly 5,000 pounds of equipment and supplies. |
|
International Space Station
…
| Name of Image |
International Space Station (ISS) Configuration Post STS-118 Mission |
| Date of Image |
2007-08-19 |
| Full Description |
Back dropped by the colorful Earth, the International Space Station (ISS) boasts its newest configuration upon the departure of Space Shuttle Endeavor and STS-118 mission. Days earlier, construction resumed on the ISS as STS-118 mission specialists and the Expedition 15 crew completed installation of the Starboard 5 (S-5) truss segment, removed a faulty Control Moment Gyroscope (CMG-3), installed a new CMG into the Z1 truss, relocated the S-band Antenna Sub-Assembly from the Port 6 (P6) to Port 1 (P1) truss, installed a new transponder on P1, retrieved the P6 transponder, and delivered roughly 5,000 pounds of supplies. |
|
STS-118 Astronauts Rick Mast
…
| Name of Image |
STS-118 Astronauts Rick Mastracchio and Clay Anderson Perform EVA |
| Date of Image |
2007-08-15 |
| Full Description |
As the construction continued on the International Space Station (ISS), STS-118 astronaut and mission specialist Rick Mastracchio was anchored on the foot restraint of the Canadarm2 as he participated in the third session of Extra Vehicular Activity (EVA) for the mission. Assisting Mastracchio was Expedition 15 flight engineer Clay Anderson (out of frame). During the 5 hour, 28 minute space walk, the two relocated the S-band Antenna Sub-Assembly from the Port 6 (P6) truss to the Port 1 (P1) truss, installed a new transponder on P1 and retrieved the P6 transponder. |
|
STS-118 Launch
| Name of Image |
STS-118 Launch |
| Date of Image |
2007-08-08 |
| Full Description |
Enroute to the International Space Station (ISS), Space Shuttle Endeavor and its seven member STS-118 crew, blasted off from the launch pad at Kennedy Space Center on August 8, 2007. Construction resumed on the ISS as STS-118 mission specialists and the Expedition 15 crew completed installation of the third Starboard 5 (S-5) truss segment, removed a faulty Control Moment Gyroscope (CMG-3), installed a new CMG into the Z1 truss, relocated the S-band Antenna Sub-Assembly from the Port 6 (P6) to Port 1 (P1) truss, installed a new transponder on P1, retrieved the P6 transponder, and delivered roughly 5,000 pounds of equipment and supplies. |
|
STS-118 Launch
| Name of Image |
STS-118 Launch |
| Date of Image |
2007-08-08 |
| Full Description |
Enroute to the International Space Station (ISS), Space Shuttle Endeavor and its seven member STS-118 crew, blasted off from the launch pad at Kennedy Space Center on August 8, 2007. Construction resumed on the ISS as STS-118 mission specialists and the Expedition 15 crew completed installation of the third Starboard 5 (S-5) truss segment, removed a faulty Control Moment Gyroscope (CMG-3), installed a new CMG into the Z1 truss, relocated the S-band Antenna Sub-Assembly from the Port 6 (P6) to Port 1 (P1) truss, installed a new transponder on P1, retrieved the P6 transponder, and delivered roughly 5,000 pounds of equipment and supplies. |
|
International Space Station
…
| Name of Image |
International Space Station (ISS) Configuration Post STS-118 Mission |
| Date of Image |
2007-08-19 |
| Full Description |
Back dropped by the blue Earth, the International Space Station (ISS) boasts its newest configuration upon the departure of Space Shuttle Endeavor and STS-118 mission. Days earlier, construction resumed on the ISS as STS-118 mission specialists and the Expedition 15 crew completed installation of the Starboard 5 (S-5) truss segment, removed a faulty Control Moment Gyroscope (CMG-3), installed a new CMG into the Z1 truss, relocated the S-band Antenna Sub-Assembly from the Port 6 (P6) to Port 1 (P1) truss, installed a new transponder on P1, retrieved the P6 transponder, and delivered roughly 5,000 pounds of equipment and supplies. |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
International Space Station Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
International Space Station Imagery |
|
| General Description |
STS-118 Shuttle Mission Imagery |
|
| General Description |
International Space Station Imagery |
|
Workers in the Space Station
…
| Description |
Workers in the Space Station Processing Facility look over an S-band Antenna Support Assembly (SASA) that will be attached to the Integrated Truss Structure (ITS) Z1 on the International Space Station. The SASA antenna is primarily for local communications between the orbiter and Space Station. The Z1 is an early exterior framework to allow the first U.S. solar arrays, on mission STS-97, flight 4A, to be temporarily installed on Unity for early power. The Z1 is scheduled on mission STS-92, the fifth flight to the Space Station, in the fall |
| Release Date |
06/06/2000 |
|
In the Space Station Process
…
| Description |
In the Space Station Processing Facility, workers prepare an S-band Antenna Support Assembly (SASA) to be lifted and moved to the Integrated Truss Structure (ITS) Z1, an element of the International Space Station. The antenna will be attached to the truss. The SASA antenna is primarily for local communications between the orbiter and Space Station. The Z1 is an early exterior framework to allow the first U.S. solar arrays, on mission STS-97, flight 4A, to be temporarily installed on Unity for early power. The Z1 is scheduled on mission STS-92, the fifth flight to the Space Station, in the fall |
| Release Date |
06/06/2000 |
|
On a workstand in the Space
…
| Description |
On a workstand in the Space Station Processing Facility, workers release the S-band Antenna Support Assembly (SASA) from an overhead crane. The SASA will be attached to the Integrated Truss Structure (ITS) Z1, an element of the International Space Station, sitting below. The antenna is primarily for local communications between the orbiter and Space Station. The Z1 is an early exterior framework to allow the first U.S. solar arrays, on mission STS-97, flight 4A, to be temporarily installed on Unity for early power. The Z1 is scheduled on mission STS-92, the fifth flight to the Space Station, in the fall |
| Release Date |
06/06/2000 |
|
An S-band Antenna Support As
…
| Description |
An S-band Antenna Support Assembly (SASA) is suspended from an overhead crane in the Space Station Processing Facility. It will be attached to the Integrated Truss Structure (ITS) Z1, an element of the International Space Station, sitting below. The SASA is primarily for local communications between the orbiter and Space Station. The Z1 is an early exterior framework to allow the first U.S. solar arrays, on mission STS-97, flight 4A, to be temporarily installed on Unity for early power. The Z1 is scheduled on mission STS-92, the fifth flight to the Space Station, in the fall |
| Release Date |
06/06/2000 |
|
An overhead crane in the Spa
…
| Description |
An overhead crane in the Space Station Processing Facility moves an S-band Antenna Support Assembly (SASA) to the Integrated Truss Structure (ITS) Z1, an element of the International Space Station. . The antenna will be attached to the truss. The SASA antenna is primarily for local communications between the orbiter and Space Station. The Z1 is an early exterior framework to allow the first U.S. solar arrays, on mission STS-97, flight 4A, to be temporarily installed on Unity for early power. The Z1 is scheduled on mission STS-92, the fifth flight to the Space Station, in the fall |
| Release Date |
06/06/2000 |
|
|
