|
|
Browse All
:
Moon of Jet Propulsion Laboratory (JPL) from 2005 and 2004
|
Printer Friendly |
A More Spectacular Sombrero
…
| Title |
A More Spectacular Sombrero (Widescreen Version) |
| Description |
This movie shifts from the well-known visible-light picture of Messier 104 taken by the Hubble Space Telescope to infrared views from NASA's Spitzer Space Telescope. Messier 104 is commonly known as the Sombrero galaxy because in visible light, it resembles the broad-brimmed Mexican hat. However, in Spitzer's striking infrared view, the galaxy looks more like a "bull's eye." Viewed from Earth, the spiral galaxy is seen nearly edge-on, just six degrees away from its equatorial plane. 50,000 light-years across, the Sombrero galaxy is considered one of the most massive objects at the southern edge of the Virgo cluster of galaxies. It is located 28 million light-years away, hosts a rich system of nearly 2,000 globular clusters and may harbor a super-massive black hole. In Hubble's visible light image, only the near rim of dust can be clearly seen in silhouette. Recent observations using Spitzer's infrared array camera uncovered the bright, smooth ring of dust circling the galaxy, seen in red. Spitzer's infrared view of the starlight, pierced through the obscuring dust, is easily seen, along with the bulge of stars and an otherwise hidden disk of stars within the dust ring. Spitzer's full view shows the disk is warped, which is often the result of a gravitational encounter with another galaxy, and clumpy areas spotted in the far edges of the ring indicate young star-forming regions. The Sombrero galaxy is located some 28 million light-years away. Viewed from Earth, it is just six degrees south of its equatorial plane. Spitzer detected infrared emission not only from the ring, but from the center of the galaxy too, where there is a huge black hole, believed to be a billion times more massive than our Sun. The Spitzer picture is composed of four images taken at 3.6 (blue), 4.5 (green), 5.8 (orange), and 8.0 (red) microns. The contribution from starlight (measured at 3.6 microns) has been subtracted from the 5.8 and 8-micron images to enhance the visibility of the dust features. The Hubble Heritage Team took these observations in May-June 2003 with the space telescope's Advanced Camera for Surveys. Images were taken in three filters (red, green, and blue) to yield a natural-color image. The team took six pictures of the galaxy and then stitched them together to create the final composite image. This magnificent galaxy has a diameter that is nearly one-fifth the diameter of the full Moon. |
|
Spitzer Spies Spectacular So
…
| Title |
Spitzer Spies Spectacular Sombrero |
| Description |
NASA's Spitzer and Hubble Space Telescopes joined forces to create this striking composite image of one of the most popular sights in the universe. Messier 104 is commonly known as the Sombrero galaxy because in visible light, it resembles the broad-brimmed Mexican hat. However, in Spitzer's striking infrared view, the galaxy looks more like a "bull's eye." In Hubble's visible light image (lower left panel), only the near rim of dust can be clearly seen in silhouette. Recent observations using Spitzer's infrared array camera (lower right panel) uncovered the bright, smooth ring of dust circling the galaxy, seen in red. Spitzer's infrared view of the starlight, piercing through the obscuring dust, is easily seen, along with the bulge of stars and an otherwise hidden disk of stars within the dust ring. Spitzer's full view shows the disk is warped, which is often the result of a gravitational encounter with another galaxy, and clumpy areas spotted in the far edges of the ring indicate young star-forming regions. The Sombrero galaxy is located some 28 million light-years away. Viewed from Earth, it is just six degrees south of its equatorial plane. Spitzer detected infrared emission not only from the ring, but from the center of the galaxy too, where there is a huge black hole, believed to be a billion times more massive than our Sun. The Spitzer picture is composed of four images taken at 3.6 (blue), 4.5 (green), 5.8 (orange), and 8.0 (red) microns. The contribution from starlight (measured at 3.6 microns) has been subtracted from the 5.8 and 8-micron images to enhance the visibility of the dust features. The Hubble Heritage Team took these observations in May-June 2003 with the space telescope's Advanced Camera for Surveys. Images were taken in three filters (red, green, and blue) to yield a natural-color image. The team took six pictures of the galaxy and then stitched them together to create the final composite image. This magnificent galaxy has a diameter that is nearly one-fifth the diameter of the full Moon. |
|
Spitzer Spies Spectacular So
…
| Title |
Spitzer Spies Spectacular Sombrero |
| Description |
NASA's Spitzer and Hubble Space Telescopes joined forces to create this striking composite image of one of the most popular sights in the universe. Messier 104 is commonly known as the Sombrero galaxy because in visible light, it resembles the broad-brimmed Mexican hat. However, in Spitzer's striking infrared view, the galaxy looks more like a "bull's eye." In Hubble's visible light image (lower left panel), only the near rim of dust can be clearly seen in silhouette. Recent observations using Spitzer's infrared array camera (lower right panel) uncovered the bright, smooth ring of dust circling the galaxy, seen in red. Spitzer's infrared view of the starlight, piercing through the obscuring dust, is easily seen, along with the bulge of stars and an otherwise hidden disk of stars within the dust ring. Spitzer's full view shows the disk is warped, which is often the result of a gravitational encounter with another galaxy, and clumpy areas spotted in the far edges of the ring indicate young star-forming regions. The Sombrero galaxy is located some 28 million light-years away. Viewed from Earth, it is just six degrees south of its equatorial plane. Spitzer detected infrared emission not only from the ring, but from the center of the galaxy too, where there is a huge black hole, believed to be a billion times more massive than our Sun. The Spitzer picture is composed of four images taken at 3.6 (blue), 4.5 (green), 5.8 (orange), and 8.0 (red) microns. The contribution from starlight (measured at 3.6 microns) has been subtracted from the 5.8 and 8-micron images to enhance the visibility of the dust features. The Hubble Heritage Team took these observations in May-June 2003 with the space telescope's Advanced Camera for Surveys. Images were taken in three filters (red, green, and blue) to yield a natural-color image. The team took six pictures of the galaxy and then stitched them together to create the final composite image. This magnificent galaxy has a diameter that is nearly one-fifth the diameter of the full Moon. |
|
Spitzer Spies Spectacular So
…
| Title |
Spitzer Spies Spectacular Sombrero |
| Description |
NASA's Spitzer and Hubble Space Telescopes joined forces to create this striking composite image of one of the most popular sights in the universe. Messier 104 is commonly known as the Sombrero galaxy because in visible light, it resembles the broad-brimmed Mexican hat. However, in Spitzer's striking infrared view, the galaxy looks more like a "bull's eye." In Hubble's visible light image (lower left panel), only the near rim of dust can be clearly seen in silhouette. Recent observations using Spitzer's infrared array camera (lower right panel) uncovered the bright, smooth ring of dust circling the galaxy, seen in red. Spitzer's infrared view of the starlight, piercing through the obscuring dust, is easily seen, along with the bulge of stars and an otherwise hidden disk of stars within the dust ring. Spitzer's full view shows the disk is warped, which is often the result of a gravitational encounter with another galaxy, and clumpy areas spotted in the far edges of the ring indicate young star-forming regions. The Sombrero galaxy is located some 28 million light-years away. Viewed from Earth, it is just six degrees south of its equatorial plane. Spitzer detected infrared emission not only from the ring, but from the center of the galaxy too, where there is a huge black hole, believed to be a billion times more massive than our Sun. The Spitzer picture is composed of four images taken at 3.6 (blue), 4.5 (green), 5.8 (orange), and 8.0 (red) microns. The contribution from starlight (measured at 3.6 microns) has been subtracted from the 5.8 and 8-micron images to enhance the visibility of the dust features. The Hubble Heritage Team took these observations in May-June 2003 with the space telescope's Advanced Camera for Surveys. Images were taken in three filters (red, green, and blue) to yield a natural-color image. The team took six pictures of the galaxy and then stitched them together to create the final composite image. This magnificent galaxy has a diameter that is nearly one-fifth the diameter of the full Moon. |
|
Spitzer Spies Spectacular So
…
| Title |
Spitzer Spies Spectacular Sombrero |
| Description |
NASA's Spitzer and Hubble Space Telescopes joined forces to create this striking composite image of one of the most popular sights in the universe. Messier 104 is commonly known as the Sombrero galaxy because in visible light, it resembles the broad-brimmed Mexican hat. However, in Spitzer's striking infrared view, the galaxy looks more like a "bull's eye." In Hubble's visible light image (lower left panel), only the near rim of dust can be clearly seen in silhouette. Recent observations using Spitzer's infrared array camera (lower right panel) uncovered the bright, smooth ring of dust circling the galaxy, seen in red. Spitzer's infrared view of the starlight, piercing through the obscuring dust, is easily seen, along with the bulge of stars and an otherwise hidden disk of stars within the dust ring. Spitzer's full view shows the disk is warped, which is often the result of a gravitational encounter with another galaxy, and clumpy areas spotted in the far edges of the ring indicate young star-forming regions. The Sombrero galaxy is located some 28 million light-years away. Viewed from Earth, it is just six degrees south of its equatorial plane. Spitzer detected infrared emission not only from the ring, but from the center of the galaxy too, where there is a huge black hole, believed to be a billion times more massive than our Sun. The Spitzer picture is composed of four images taken at 3.6 (blue), 4.5 (green), 5.8 (orange), and 8.0 (red) microns. The contribution from starlight (measured at 3.6 microns) has been subtracted from the 5.8 and 8-micron images to enhance the visibility of the dust features. The Hubble Heritage Team took these observations in May-June 2003 with the space telescope's Advanced Camera for Surveys. Images were taken in three filters (red, green, and blue) to yield a natural-color image. The team took six pictures of the galaxy and then stitched them together to create the final composite image. This magnificent galaxy has a diameter that is nearly one-fifth the diameter of the full Moon. |
|
A More Spectacular Sombrero
| Title |
A More Spectacular Sombrero |
| Description |
This movie shifts from the well-known visible-light picture of Messier 104 taken by the Hubble Space Telescope to infrared views from NASA's Spitzer Space Telescope. Messier 104 is commonly known as the Sombrero galaxy because in visible light, it resembles the broad-brimmed Mexican hat. However, in Spitzer's striking infrared view, the galaxy looks more like a "bull's eye." Viewed from Earth, the spiral galaxy is seen nearly edge-on, just six degrees away from its equatorial plane. 50,000 light-years across, the Sombrero galaxy is considered one of the most massive objects at the southern edge of the Virgo cluster of galaxies. It is located 28 million light-years away, hosts a rich system of nearly 2,000 globular clusters and may harbor a super-massive black hole. In Hubble's visible light image, only the near rim of dust can be clearly seen in silhouette. Recent observations using Spitzer's infrared array camera uncovered the bright, smooth ring of dust circling the galaxy, seen in red. Spitzer's infrared view of the starlight, pierced through the obscuring dust, is easily seen, along with the bulge of stars and an otherwise hidden disk of stars within the dust ring. Spitzer's full view shows the disk is warped, which is often the result of a gravitational encounter with another galaxy, and clumpy areas spotted in the far edges of the ring indicate young star-forming regions. The Sombrero galaxy is located some 28 million light-years away. Viewed from Earth, it is just six degrees south of its equatorial plane. Spitzer detected infrared emission not only from the ring, but from the center of the galaxy too, where there is a huge black hole, believed to be a billion times more massive than our Sun. The Spitzer picture is composed of four images taken at 3.6 (blue), 4.5 (green), 5.8 (orange), and 8.0 (red) microns. The contribution from starlight (measured at 3.6 microns) has been subtracted from the 5.8 and 8-micron images to enhance the visibility of the dust features. The Hubble Heritage Team took these observations in May-June 2003 with the space telescope's Advanced Camera for Surveys. Images were taken in three filters (red, green, and blue) to yield a natural-color image. The team took six pictures of the galaxy and then stitched them together to create the final composite image. This magnificent galaxy has a diameter that is nearly one-fifth the diameter of the full Moon. |
|
Purple Haze
| Description |
Purple Haze |
| Full Description |
Encircled in purple stratospheric haze, Titan appears as a softly glowing sphere in this colorized image taken one day after Cassini's first flyby of the moon on July 2, 2004. This image shows a thin, detached haze layer that appears to float above the main atmospheric haze. Because of its thinness, the high haze layer is best seen at the moon's limb. NASA's Voyager spacecraft detected such detached haze layers on Titan during their flybys in the early 1980s. The image, which shows Titan's southern polar region, was taken using a spectral filter sensitive to wavelengths of ultraviolet light centered at 338 nanometers. The image has been false-colored to approximate what the human eye might see were our vision able to extend into the ultraviolet: The globe of Titan retains the pale orange hue our eyes usually see, and both the main atmospheric haze and the thin detached layer have been given their natural purple color. The haze layers have been brightened for visibility. The best possible observations of the detached layer are made in ultraviolet light because the small haze particles which populate this part of Titan¿s upper atmosphere scatter short wavelengths more efficiently than longer visible or infrared wavelengths. This accounts for the bluish-purple color. Images like this one reveal some of the key steps in the formation and evolution of Titan's haze. The process begins in the high atmosphere (at altitudes higher than 600 kilometers or 370 miles), where solar ultraviolet light breaks down methane and nitrogen molecules. The products react to form more complex organic molecules containing carbon, hydrogen and nitrogen, and these in turn combine to form the very small particles seen as high hazes. The small particles stick upon collision with one another, forming larger particles which fall deeper into the atmosphere to maintain the lower main haze layer which is thick enough to obscure the surface at visible wavelengths. The altitude of the detached haze layer observed by Cassini (near 500 kilometers or 310 miles) is significantly higher than the detached haze seen by Voyager (at 300 to 350 kilometers or 185 to 215 miles). The upward shift in haze altitude from Voyager to Cassini suggests the possibility of seasonality in haze production or atmospheric circulation strength. The image was taken with the Cassini spacecraft narrow-angle camera on July 3, 2004, at a distance of about 789,000 kilometers (491,000 miles) from Titan and at a Sun-Titan-spacecraft, or phase, angle of 114 degrees. The image scale is 4.7 kilometers (2.9 miles) per pixel. [This caption was modified on March 16, 2005.] The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras, were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
|
Approaching Titan Again
| Description |
Approaching Titan Again |
| Full Description |
Titan presented this face as the Cassini spacecraft approached for its second very close flyby of the mystery moon in December 2004. Prominent in the center of the image is Xanadu, a broad bright area on Titan first seen by NASA's Hubble Space Telescope in the mid-1990s. The region seen a few hours later during this Cassini encounter at higher resolution has just started to rotate into view on the left when this image was taken. Regions on the right (east) in this image had not been seen clearly before. Other interesting features in this image, first seen by Cassini, include a bright 560-kilometer wide (345 mile) semi-circle in the lower right of Xanadu which may be an impact structure, and a confirmed crater with multiple concentric rings (near the upper right). The inner, dark circular feature in this crater is 300 +/- 20 kilometers (186 +/- 12 miles) in diameter. Below Xanadu, two bright, linear clouds can be seen at about 38 degrees south latitude, these clouds were seen to dissipate a few hours later. Surprisingly, no clouds were seen near the south pole, as had been seen during the October close encounter (see PIA06124) and during the July distant encounter (see PIA06110). This image was taken with the Cassini spacecraft narrow-angle camera on Dec. 10, 2004 at a distance of 1,746,000 kilometers (1,082,500 miles) and has a scale of 10.4 kilometers (6 miles) per pixel. A special filter in the near-infrared at 938 nanometers was used for this image. The image was processed to enhance surface features and sharpen boundaries. Some artifacts, like the false shadow around the bright streaked cloud, are a result of the processing. [This caption was modified on March 16, 2005.] The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
|
Iapetus Thermal Radiation Im
…
| Description |
Iapetus Thermal Radiation Image |
| Full Description |
This image of the infrared heat radiation from Saturn's moon Iapetus was obtained by the Cassini composite infrared spectrometer instrument 16 hours before Cassini's closest approach to this mysterious moon, on December 31, 2004. The thermal radiation is shown as both a grayscale image, equivalent to what we would see if our eyes were sensitive to infrared wavelengths near 15 microns, and as a color-coded temperature map. A previously-released mosaic obtained by Cassini's imaging camera shortly before the composite infrared spectrometer observation, with similar scale and orientation, is also shown for comparison. Temperatures reach nearly 130 Kelvin (-226 Fahrenheit) at noon on the equator on the dark material that covers most of this side of Iapetus, making high noon on Iapetus's dark side probably the warmest places in the Saturn system. This is much warmer than temperatures on another Saturnian moon, Phoebe, measured by composite infrared spectrometer in June 2004. Those Phoebe temperature measurements peaked near 112 Kelvin (-258 Fahrenheit), because though Phoebe is almost as dark as Iapetus's dark material and absorbs nearly as much sunlight, Phoebe rotates much more quickly (once every 9 hours, compared to 79 days for Iapetus). That means the surface has less time to heat up during the day. Temperatures on Iapetus's bright material are much colder, peaking near 100 Kelvin (-280 Fahrenheit), both because the bright material absorbs less sunlight and because it is further from the equator on this side of Iapetus. Temperatures in the large crater near the center of the disc are slightly different from those in surrounding areas, because sloping surfaces within the crater are warmer where they are tilted towards the Sun and cooler when tilted away from the Sun. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The composite infrared spectrometer team is based at NASA's Goddard Space Flight Center, Greenbelt, Md. For more information about the Cassini-Huygens mission visit, http://saturn.jpl.nasa.gov and the instrument team's home page, http://cirs.gsfc.nasa.gov/. *Credit*: NASA/JPL/GSFC |
| Date |
January 10, 2005 |
|
Expected Footprints of 36-Im
…
| Description |
Expected Footprints of 36-Image Panoramas from Huygens Camera |
| Full Description |
This map of a portion of the surface of Saturn's moon Titan shows predictions for the areas that will be covered by selected combinations of images anticipated from the camera on the Huygens probe as it descends through Titan's atmosphere on Jan. 14, 2005. The map is made from data acquired by the visual and infrared mapping spectrometer aboard the Cassini orbiter during the orbiter's flyby of Titan in October 2004. Cassini released the Huygens probe in December 2004. The octagons indicate anticipated fields of view of panoramic mosaics of images taken by Huygens' descent imager and spectral radiometer instrument as the probe reaches certain altitudes during its descent. This map shows the footprints for mosaics to be assembled from 36 individual images at each altitude, with the field of view cut off at 75 degrees from straight down although the actual images will extend all the way to the hazy horizon. Each mosaic made this way will be about 1,300 by 1,300 pixels. The largest octagon (in red) is about 1,120 kilometers (696 miles) across and represents the field of view for the mosaic of images taken at an altitude of 150 kilometers (93 miles). From that height, individual pixels in the center of the image will be about 150 meters (492 feet) across, though haze between the ground and the camera at that height will likely degrade the resolution in those images. The progressively smaller octagons are the anticipated fields of view from altitudes of 90 kilometers (60 miles), 50 kilometers (30 miles) and 30 kilometers (19 miles). In all, the camera is expected to acquire panoramic mosaics at a total of 20 different altitudes from 150 kilometers (93 miles) down to about 3 kilometers (2 miles). The pixel size in the mosaic from 3 kilometers high will be about 3 meters (10 feet) across. In addition, the camera is expected to obtain individual images down to an altitude of about 200 meters (656 feet) with pixel size as small as 20 centimeters (8 inches). The location of the anticipated landing site is based on modeling of Titan's winds, and the actual landing site will be different if the actual winds experienced by Huygens during descent differ from this model. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Cassini-Huygens mission for NASA's Science Mission Directorate, Washington. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The visible and infrared mapping spectrometer team is based at the University of Arizona, Tucson. For more information about the Cassini-Huygens mission visit, http://saturn.jpl.nasa.gov. For more information about the visual and infrared mapping spectrometer visit http://wwwvims.lpl.arizona.edu/. *Image Credit*: NASA/JPL/University of Arizona/USGS |
| Date |
January 13, 2005 |
|
Rhea in Natural Color
| Description |
Rhea in Natural Color |
| Full Description |
The trailing hemisphere of Saturn's moon Rhea seen here in natural color, displays bright, wispy terrain that is similar in appearance to that of Dione, another one of Saturn's moon. At this distance however, the exact nature of these wispy features remains tantalizingly out of the reach of Cassini's cameras. At this resolution, the wispy terrain on Rhea looks like a thin coating painted onto the moon's surface. Cassini images from December 2004 (see http://photojournal.jpl.nasa.gov/catalog/PIA06163) revealed that, when seen at moderate resolution, Dione's wispy terrain is comprised of many long, narrow and braided fractures. Images taken using red, green and blue spectral filters were combined to create this natural color view. The images were acquired with the Cassini spacecraft narrow angle camera on Jan. 16, 2005, at a distance of approximately 496,500 kilometers (308,600 miles) from Rhea and at a Sun-Rhea-spacecraft, or phase, angle of 35 degrees. Resolution in the original image was about 3 kilometers (2 miles) per pixel. The image has been rotated so that north on Rhea is up. Contrast was enhanced and the image was magnified by a factor of two to aid visibility. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For images visit the Cassini imaging team home page http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
| Date |
February 4, 2005 |
|
Titan Flyby Number Four
| Description |
Titan Flyby Number Four |
| Full Description |
NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute, This map of the surface of Saturn's moon Titan illustrates the regions that will be imaged by Cassini during the spacecraft's fourth (and third very close) flyby of the smoggy moon on Feb. 15, 2005. At closest approach, Cassini is expected to pass approximately 1,580 kilometers (982 miles) above the moon's surface. The colored lines delineate the regions that will be imaged at differing resolutions. The lower resolution imaging sequences (outlined in blue) are designed to study the atmosphere, clouds and surface in a variety of spectral filters. Other areas have been specifically targeted for creation of mosaics based on moderate resolution images of surface features. Two small areas (outlined in yellow) will be seen at high resolution by Cassini's narrow angle camera, and will be jointly covered by the visual and mapping spectrometer experiment. These high resolution targets also overlap areas covered by the Cassini radar altimetry and synthetic aperture radar experiments. The site where the Huygens probe landed in mid-January will be imaged at lower resolution during this flyby and is within the terrain in the extreme western part of the coverage area. The low-resolution imaging coverage will extend farther east than the previous two close flybys in October and December 2004. Some areas covered at moderate resolution during previous flybys have been targeted again to allow Cassini scientists to look for changes. The map shows only brightness variations on Titan's surface (the illumination is such that there are no shadows and no shading due to topographic variations). Previous observations indicate that, due to Titan's thick, hazy atmosphere, the sizes of surface features that can be resolved are a few to five times larger than the actual pixel scale labeled on the map. The map was made from global images taken in June 2004, at image scales of 35 to 88 kilometers (22 to 55 miles) per pixel, and south polar coverage from July 2004, at an image scale of 2 kilometers (1.3 miles) per pixel. The images were obtained using a narrow band filter centered at 938 nanometers -- a near-infrared wavelength (invisible to the human eye) at which light can penetrate Titan's atmosphere to reach the surface and return through the atmosphere to be detected by the camera. The images have been processed to enhance surface details. It is currently northern winter on Titan, so the moon's high northern latitudes are not illuminated, resulting in the lack of coverage north of 45 degrees north latitude. Clouds near the south pole (see http://photojournal.jpl.nasa.gov/catalog/PIA06110) have also been removed (south of -75 degrees). At 5,150 kilometers (3,200 miles) across, Titan is one of the solar system's largest moons. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for |
| Date |
February 14, 2005 |
|
Phoebian Explorers 2
| Description |
Phoebian Explorers 2 |
| Full Description |
These two montages of images of Saturn's moon Phoebe, taken by Cassini in June 2004, show the names provisionally assigned to 24 craters on this Saturnian satellite by the International Astronomical Union. The craters are named for the Argonauts, explorers of Greek mythology who sought the golden fleece. Argo was the name of their ship. The largest crater, approximately 100 kilometers (62 miles) across, is named after the leading Argonaut, Jason. Phoebe is an outer moon of Saturn and is 220 kilometers (136 miles) across. The two-image montage (See Phoebian Explorers 1) displays mosaics made of individual, very high resolution images: 80 meters (260 feet) per pixel on the left, 200 meters (660 feet) per pixel on the right. This montage shows eight images of much lower resolution, ranging from 0.5 to 1 kilometer (0.3 to 0.6 mile) per pixel. The images in this montage show Phoebe as it rotated, and include regions of the moon not visible in the higher resolution montage. The images have been slightly rescaled from their original formats and contrast-enhanced. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For images visit the Cassini imaging team home page http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
| Date |
February 24, 2005 |
|
Phoebian Explorers 1
| Description |
Phoebian Explorers 1 |
| Full Description |
These two montages of images of Saturn's moon Phoebe, taken by Cassini in June 2004, show the names provisionally assigned to 24 craters on this Saturnian satellite by the International Astronomical Union. The craters are named for the Argonauts, explorers of Greek mythology who sought the golden fleece. Argo was the name of their ship. The largest crater, approximately 100 kilometers (62 miles) across, is named after the leading Argonaut, Jason. Phoebe is an outer moon of Saturn and is 220 kilometers (136 miles) across. The two-image montage displays mosaics made of individual, very high resolution images: 80 meters (260 feet) per pixel on the left, 200 meters (660 feet) per pixel on the right. The other montage (see Phoebian Explorers 2) shows eight images of much lower resolution, ranging from 0.5 to 1 kilometer (0.3 to 0.6 mile) per pixel. The images in this montage show Phoebe as it rotated, and include regions of the moon not visible in the higher resolution montage. The images have been slightly rescaled from their original formats and contrast-enhanced. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For images visit the Cassini imaging team home page http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
| Date |
February 24, 2005 |
|
Tracing Surface Features on
…
| Description |
Tracing Surface Features on Titan -- Mosaic |
| Full Description |
This mosaic of Titan's south polar region was acquired during Cassini's first and distant encounter with the smog-enshrouded moon on July 2, 2004. The spacecraft approached Titan at a distance of about 340,000 kilometers (211,000 miles) during this flyby. This is a contrast-enhanced version of a previously released image (see Titan's Mottled Surface), which allows surface details to be seen more easily. The very bright features near the south pole are clouds. Due to Titan's thick, hazy atmosphere, the sizes of surface features that can be resolved are a few to five times larger than the actual pixel scale. At this distance, pixel scale is 2 kilometers (about 1 mile), so features larger than several kilometers across are resolved in the images. A montage containing pairs of close-up images from this mosaic is also available (see Tracing Surface Features on Titan -- Close-up). The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
| Date |
March 9, 2005 |
|
Cassini's Latest Flyby
| Description |
Cassini's T4 Flyby |
| Full Description |
This map of Titan's surface illustrates the regions that will be imaged by Cassini during the spacecraft's close flyby of the haze-covered moon on March 31, 2005. At closest approach, the spacecraft is expected to pass approximately 2,400 kilometers (1,500 miles) above the moon's surface. The colored lines delineate the regions that will be imaged at different resolutions. Images from this encounter will include the eastern portion of territory observed by Cassini's radar instrument in October 2004 and February 2005. This will be the Cassini cameras' best view to date of this area of Titan. The higher resolution (red) box at the northwestern edge of the covered region targets the area observed by Cassini's synthetic aperture radar at the closest approach point of the February flyby. The Cassini visual and infrared mapping spectrometer experiment will also be targeting this area during the March 31 flyby, yielding coverage of the same part of Titan's surface by three different instruments. The map shows only brightness variations on Titan's surface (the illumination is such that there are no shadows and no shading due to topographic variations). Previous observations indicate that, due to Titan's thick, hazy atmosphere, the sizes of surface features that can be resolved are a few to five times larger than the actual pixel scale labeled on the map. The images for this global map were obtained using a narrow band filter centered at 938 nanometers -- a near-infrared wavelength (invisible to the human eye). At that wavelength, light can penetrate Titan's atmosphere to reach the surface and return through the atmosphere to be detected by the camera. The images have been processed to enhance surface details. It is currently northern winter on Titan, so the moon's high northern latitudes are not illuminated, resulting in the lack of coverage north of 35 degrees north latitude. At 5,150 kilometers (3,200 miles) across, Titan is one of the solar system's largest moons. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
| Date |
March 30, 2005 |
|
New Titan Territory
| Description |
New Titan Territory |
| Full Description |
Although the Huygens probe has now pierced the murky skies of Titan and landed on its surface, much of the moon remains for the Cassini spacecraft to explore. Titan continues to present exciting puzzles. This view of Titan uncovers new territory not previously seen at this resolution by Cassini's cameras. The view is a composite of four nearly identical wide-angle camera images, all taken using a filter sensitive to wavelengths of infrared light centered at 939 nanometers. The individual images have been combined and contrast-enhanced in such a way as to sharpen surface features and enhance overall brightness variations. Some of the territory in this view was covered by observations made by the Cassini synthetic aperture radar in October 2004 and February 2005. At large scales, there are similarities between the views taken by the imaging science subsystem cameras and the radar results, but there also are differences. For example, the center of the floor of the approximately 80-kilometer-wide (50-mile) crater identified by the radar team in February (near the center in this image, see PIA07368 for the radar image) is relatively bright at 2.2 centimeters, the wavelength of the radar experiment, but dark in the near-infrared wavelengths used here by Cassini's optical cameras. This brightness difference is also apparent for some of the surrounding material and could indicate differences in surface composition or roughness. Such comparisons, as well as information from observations acquired by the visual and infrared mapping spectrometer at the same time as the optical camera observations, are important in trying to understand the nature of Titan's surface materials. The images for this composite view were taken with the Cassini spacecraft on March 31, 2005, at distances ranging from approximately 146,000 to 130,000 kilometers (91,000 to 81,000 miles) from Titan and at a Sun-Titan-spacecraft, or phase, angle of about 57 degrees. The image scale is 8 kilometers (5 miles) per pixel. Previous observations indicate that, due to Titan's thick, hazy atmosphere, the sizes of surface features that can be resolved are a few times larger than the actual pixel scale. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org |
| Date |
April 5, 2005 |
|
Cassini's Views of Titan
| Description |
Cassini's Views of Titan |
| Full Description |
These three views of Titan from the Cassini spacecraft illustrate how different the same place can look in different wavelengths of light. Cassini's cameras have numerous filters that reveal features above and beneath the shroud of Titan's atmosphere. The first image, a natural color composite, is a combination of images taken through three filters that are sensitive to red, green and violet light. It shows approximately what Titan would look like to the human eye: a hazy orange globe surrounded by a tenuous, bluish haze. The orange color is due to the hydrocarbon particles which make up Titan's atmospheric haze. This obscuring haze was particularly frustrating for planetary scientists following the NASA Voyager mission encounters in 1980-81. Fortunately, Cassini is able to pierce Titan's veil at infrared wavelengths. A single view of this composite is also available (see Natural Color Composite). The second, monochrome view shows what Titan looks like at 938 nanometers, a near-infrared wavelength that allows Cassini to see through the hazy atmosphere and down to the surface. The view was created by combining three separate images taken with this filter, in order to improve the visibility of surface features. The variations in brightness on the surface are real differences in the reflectivity of the materials on Titan. A single view of this image is also available (see Monochrome View). The third view, which is a false-color composite, was created by combining two infrared images (taken at 938 and 889 nanometers) with a visible light image (taken at 420 nanometers). Green represents areas where Cassini is able to see down to the surface. Red represents areas high in Titan's stratosphere where atmospheric methane is absorbing sunlight. Blue along the moon's outer edge represents visible violet wavelengths at which the upper atmosphere and detached hazes are better seen. A single view of this composite is also available (see False Color Composite). A similar false-color image showing the opposite hemisphere of Titan was created from images taken during Cassini's first close flyby of the smoggy moon in October 2004 (see PIA06139). At that time, clouds could be seen near Titan's south pole, but in these more recent observations no clouds are seen. North on Titan is up and tilted 30 degrees to the right. All of these images were taken with the Cassini spacecraft wide angle camera on April 16, 2005, at distances ranging from approximately 173,000 to 168,200 kilometers (107,500 to 104,500 miles) from Titan and from a Sun-Titan-spacecraft, or phase, angle of 56 degrees. Resolution in the images approximately 10 kilometers per pixel. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter, and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
| Date |
April 22, 2005 |
|
Cassini's View of Titan: Fal
…
| Description |
Cassini's View of Titan |
| Full Description |
This false-color composite was created with images taken during the Cassini spacecraft's closest flyby of Titan on April 16, 2005. It was created by combining two infrared images (taken at 938 and 889 nanometers) with a visible light image (taken at 420 nanometers). Green represents areas where Cassini is able to see down to the surface. Red represents areas high in Titan's stratosphere where atmospheric methane is absorbing sunlight. Blue along the moon's outer edge represents visible violet wavelengths at which the upper atmosphere and detached hazes are better seen. A similar false-color image showing the opposite hemisphere of Titan was created from images taken during Cassini's first close flyby of the smoggy moon in October 2004 (see PIA06139). At that time, clouds could be seen near Titan's south pole, but in these more recent observations no clouds are seen. North on Titan is up and tilted 30 degrees to the right. The images used to create this composite were taken with the Cassini spacecraft wide angle camera on April 16, 2005, at distances ranging from approximately 173,000 to 168,200 kilometers (107,500 to 104,500 miles) from Titan and from a Sun-Titan-spacecraft, or phase, angle of 56 degrees. Resolution in the images approximately 10 kilometers per pixel. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
| Date |
April 22, 2005 |
|
Cassini's April 16 Flyby of
…
| Description |
Cassinis April 16 Flyby of Titan |
| Full Description |
This map of Titan's surface illustrates the regions that will be imaged by Cassini during the spacecraft's close flyby of the smog-enshrouded moon on April 16, 2005. At closest approach, the spacecraft is expected to pass approximately 1,025 kilometers (640 miles) above the moon's surface. The colored lines delineate the regions that will be imaged at differing resolutions. Images from this encounter will add to those taken during the March 31, 2005, flyby and improve the moderate resolution coverage of this region. The imaging coverage will include the eastern portion of territory observed by Cassini's radar instrument in October 2004 and February 2005, and will provide a way to compare the surface as viewed by the different instruments. Such comparisons (see PIA06222) will provide insight into the nature of Titan's surface. The higher-resolution (yellow boxes) have been spread out around a central mosaic in order to maximize coverage of this region by the visual and infrared mapping spectrometer which will be observing simultaneously with the cameras of the imaging science subsystem. The map shows only brightness variations on Titan's surface (the illumination is such that there are no shadows and no shading due to topographic variations). Previous observations indicate that, due to Titan's thick, hazy atmosphere, the sizes of surface features that can be resolved are a few times larger than the actual pixel scale labeled on the map. The images for this global map were obtained using a narrow band filter centered at 938 nanometers -- a near-infrared wavelength (invisible to the human eye). At this wavelength, light can penetrate Titan's atmosphere to reach the surface and return through the atmosphere to be detected by the camera. The images have been processed to enhance surface details. It is currently northern winter on Titan, so the moon's high northern latitudes are not illuminated, resulting in the lack of coverage north of 35 degrees north latitude. At 5,150 kilometers (3,200 miles) across, Titan is one of the solar system's largest moons. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . Credit: NASA/JPL/Space Science Institute |
| Date |
April 13, 2005 |
|
Discovery of the Wavemaker
| Description |
Discovery of the Wavemaker |
| Full Description |
Cassini's celestial sleuthing has paid off with a series of images which confirmed earlier suspicions that a small moon was orbiting within the narrow Keeler gap within Saturn's rings. This view was created by combining six individual, unmagnified frames from the movie sequence of images in which the moon was discovered. The digital composite view improves the overall resolution of the scene compared to that available in any of the single images (see Wavemaker Moon for the movie sequence). The Keeler gap is located about 250 kilometers (155 miles) inside the outer edge of the A ring, which is also the outer edge of the bright main rings. The new object is about 7 kilometers (4 miles) across and reflects about 50 percent of the sunlight light that falls upon it -- a brightness that is typical of particles in the nearby rings. The new body has been provisionally named S/2005 S1. Imaging scientists predicted the moon's presence and its orbital distance from Saturn after July 2004, when they saw a set of peculiar spiky and wispy features in the Keeler gap's outer edge. The similarities of the Keeler gap features to those noted in Saturn's F ring and the Encke gap led the scientists to conclude that a small body, a few kilometers across, was lurking in the center of the Keeler gap, awaiting discovery. Also included here is a view of the same scene created by combining six individual, unmagnified frames used in the movie sequence. This digital composite view improves the overall resolution of the scene compared to that available in any of the single images. These images were obtained with the Cassini spacecraft narrow-angle camera on May 1, 2005, at a distance of approximately 1.1 million kilometers (708,000 miles) from Saturn. Resolution in the original image was 8 kilometers (5 miles) per pixel. The images in the movie sequence have been magnified in (the vertical direction only) by a factor of two to aid visibility of features caused within the gap by the moonlet. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . Credit: NASA/JPL/Space Science Institute |
| Date |
May 10, 2005 |
|
Great White Splat
| Description |
Looking closely at Saturns moon Rhea during a somewhat distant flyby |
| Full Description |
Looking closely at Saturn's moon Rhea during a somewhat distant flyby, Cassini provides this view of what appears to be a bright, rayed and therefore relatively young crater. This crater was also observed by Cassini at much lower resolution in the fall of 2004 and in spring of 2005. Rhea is 1,528 kilometers (949 miles) across. For comparison, viewing the same crater near the terminator (the line between day and night) would highlight the crater's topography (vertical relief), compared to its brightness, which is highlighted in this view where the Sun is at a higher angle. North on Rhea is up and rotated about 15 degrees to the left. This view shows principally the leading hemisphere on Rhea. The image was taken in visible light with the Cassini spacecraft narrow-angle camera on April 14, 2005, at a distance of approximately 247,000 kilometers (153,000 miles) from Rhea and at a Sun-Rhea-spacecraft, or phase angle of 70 degrees. Resolution in the image is 1 kilometer (0.6 mile) per pixel. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . Credit: NASA/JPL/Space Science Institute |
| Date |
May 13, 2005 |
|
Moon Against the Shadows
| Description |
A maze of lines is a Cassini portrait of the gas giant Saturn, its rings and its small, icy moon Mimas |
| Full Description |
This spectacular and disorienting maze of lines is a Cassini portrait of the gas giant Saturn, its rings and its small, icy moon Mimas. The rings cast dark shadows across Saturn's northern hemisphere, creating a photonegative effect: dark sections are dense and block the Sun, while bright sections are less dense areas or gaps in the rings, which are more transparent to sunlight. Saturn's moon Mimas (397 kilometers, or 247 miles across) is seen here against the backdrop created by the shadow of the dense B ring. Above Mimas and the B ring shadow can be seen the broad gap of the Cassini Division. The actual Cassini Division, which divides the A and B rings, is visible about one-third of the way up from the bottom of the image. This view was obtained in visible light with the Cassini spacecraft narrow-angle camera on Oct. 15, 2004, at a distance of approximately 4.7 million kilometers (2.9 million miles) from Saturn. The image scale is 28 kilometers (17 miles) per pixel. This image was taken from beneath the plane of Saturn's rings. It is similar to the serene portrait provided by Cassini in a natural color view from November, 2004 (see Nature's Canvas). The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . The Cassini imaging team homepage is at http://ciclops.org . Credit: NASA/JPL/Space Science Institute |
| Date |
June 8, 2005 |
|
Discovery of the Wavemaker
| Description |
Here on the Gallery page you can find the very latest images, videos and products from the Cassini-Huygens mission to Saturn, including the spectacular launch, spacecraft assembly and the exciting trip to Saturn. |
| Full Description |
Cassini's celestial sleuthing has paid off with this time-lapse series of images which confirmed earlier suspicions that a small moon was orbiting within the narrow Keeler gap of Saturn's rings. The movie sequence, which consists of 12 images taken over 16 minutes while Cassini gazed down upon the sunlit side of the A ring, shows a tiny moon orbiting in the center of the Keeler gap, churning up waves in the gap edges as it goes. The pattern of waves travels with the moon in its orbit. The Keeler gap is located about 250 kilometers (155 miles) inside the outer edge of the A ring, which is also the outer edge of the bright main rings. The new object is about 7 kilometers across (4 miles) and reflects about 50 percent of the sunlight that falls upon it -- a brightness that is typical of particles in the nearby rings. The new body has been provisionally named S/2005 S1. Imaging scientists predicted the moon's presence and its orbital distance from Saturn after July 2004, when they saw a set of peculiar spiky and wispy features in the Keeler gap's outer edge. The similarities of the Keeler gap features to those noted in Saturn's F ring and the Encke gap led the scientists to conclude that a small body, a few kilometers across, was lurking in the center of the Keeler gap, awaiting discovery. Also included here is a view of the same scene created by combining six individual, unmagnified frames used in the movie sequence. This digital composite view improves the overall resolution of the scene compared to that available in any of the single images. The images in this movie sequence were obtained with the Cassini spacecraft narrow-angle camera on May 1, 2005, at a distance of approximately 1.1 million kilometers (708,000 miles) from Saturn. Resolution in the original image was 8 kilometers (5 miles) per pixel. The images in the movie sequence have been magnified in (the vertical direction only) by a factor of two to aid visibility of features caused within the gap by the moonlet. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . Credit: NASA/JPL/Space Science Institute |
|
Discovery of the Wavemaker
| Description |
Here on the Gallery page you can find the very latest images, videos and products from the Cassini-Huygens mission to Saturn, including the spectacular launch, spacecraft assembly and the exciting trip to Saturn. |
| Full Description |
Cassini's celestial sleuthing has paid off with this time-lapse series of images which confirmed earlier suspicions that a small moon was orbiting within the narrow Keeler gap of Saturn's rings. The movie sequence, which consists of 12 images taken over 16 minutes while Cassini gazed down upon the sunlit side of the A ring, shows a tiny moon orbiting in the center of the Keeler gap, churning up waves in the gap edges as it goes. The pattern of waves travels with the moon in its orbit. The Keeler gap is located about 250 kilometers (155 miles) inside the outer edge of the A ring, which is also the outer edge of the bright main rings. The new object is about 7 kilometers across (4 miles) and reflects about 50 percent of the sunlight that falls upon it -- a brightness that is typical of particles in the nearby rings. The new body has been provisionally named S/2005 S1. Imaging scientists predicted the moon's presence and its orbital distance from Saturn after July 2004, when they saw a set of peculiar spiky and wispy features in the Keeler gap's outer edge. The similarities of the Keeler gap features to those noted in Saturn's F ring and the Encke gap led the scientists to conclude that a small body, a few kilometers across, was lurking in the center of the Keeler gap, awaiting discovery. Also included here is a view of the same scene created by combining six individual, unmagnified frames used in the movie sequence. This digital composite view improves the overall resolution of the scene compared to that available in any of the single images. The images in this movie sequence were obtained with the Cassini spacecraft narrow-angle camera on May 1, 2005, at a distance of approximately 1.1 million kilometers (708,000 miles) from Saturn. Resolution in the original image was 8 kilometers (5 miles) per pixel. The images in the movie sequence have been magnified in (the vertical direction only) by a factor of two to aid visibility of features caused within the gap by the moonlet. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . Credit: NASA/JPL/Space Science Institute |
|
Tumbling Hyperion
| Description |
Tumbling Hyperion |
| Full Description |
This image represents Cassini's best view yet of Saturn's battered and chaotically rotating little moon Hyperion. Hyperion, pronounced "high-PEER-ee-on," is 266 kilometers (165 miles) across. Cassini was, at the time, speeding away from the Saturn system on its initial long, looping orbit. Hyperion has an irregular shape and is known to tumble erratically in its orbit. Cassini is scheduled to fly past this moon on September 26, 2005. This image was taken in visible light with the Cassini spacecraft narrow angle camera on July 15, 2004, from a distance of about 6.7 million kilometers (4.1 million miles) from Hyperion. The Sun- Hyperion-spacecraft, or phase angle of this image is 95 degrees. The image scale is 40 kilometers (25 miles) per pixel. The image has been magnified by a factor of four to aid visibility. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Cassini-Huygens mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission, visit http://saturn.jpl.nasa.gov and the Cassini imaging team home page, http://ciclops.org . Image Credit: NASA/JPL/Space Science Institute |
|
Faint Southern Clouds
| Description |
Faint Southern Clouds |
| Full Description |
This clear-filter view of Saturn's moon Titan reveals a region of cloud activity at high southern latitudes. Titan is 5,150 kilometers (3,200 miles) across. Cassini observations have generally been consistent with Earth-based observations that indicate the south-polar fields of clouds that had been observed frequently in 2004 haven't been present in 2005. This image was taken in visible light with the Cassini spacecraft narrow-angle camera on Aug. 31, 2005, at a distance of approximately 3.3 million kilometers (2 million miles) from Titan and at a Sun-Titan-spacecraft, or phase, angle of 70 degrees. The image scale is 20 kilometers (12 miles) per pixel. North on Titan is up and rotated about 20 degrees to the left. The view has been mildly enhanced to make the cloud feature more easily visible. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging operations center is based at the Space Science Institute in Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . The Cassini imaging team homepage is at http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
| Date |
September 29, 2005 |
|
Iapetus Temperature Map
| Description |
Iapetus Temperature Map |
| Full Description |
This temperature map of Saturn's moon Iapetus is constructed from observations of Iapetus's infrared heat radiation taken with the Cassini composite infrared spectrometer instrument during the Dec. 31, 2004 flyby. The orange asterisk marks the point on Iapetus where the Sun is directly overhead. Temperatures reach nearly 130 Kelvin (-226 Fahrenheit) at noon on the equator on the dark material that covers most of this side of Iapetus, making high noon on Iapetus's dark side probably the warmest places in the Saturn system. This is much warmer than temperatures on the moon Phoebe measured by the composite infrared spectrometer in June 2004, which peaked near 112 Kelvin (-258 Fahrenheit). That's because, although Phoebe is almost as dark as Iapetus's dark material and absorbs nearly as much sunlight, Phoebe rotates much more quickly (once every 9 hours, compared to 79 days for Iapetus). That means the surface has less time to heat up during the day. Temperatures on Iapetus' bright material are much colder, peaking near 100 Kelvin (-280 Fahrenheit), both because the bright material absorbs less sunlight and because it is further from the equator on this side of Iapetus. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The composite infrared spectrometer team is based at NASA's Goddard Space Flight Center, Greenbelt, Md. For more information about the Cassini-Huygens mission visit, http://saturn.jpl.nasa.gov and the instrument team's home page, http://cirs.gsfc.nasa.gov/. *Credit*: NASA/JPL/GSFC |
| Date |
January 10, 2005 |
|
Prime Time for Rhea
| Description |
Prime Time for Rhea |
| Full Description |
This map of the surface of Saturn's moon, Rhea, illustrates the regions that will be imaged by Cassini during the spacecraft's close flyby of the moon on Nov. 26, 2005. At closest approach, the spacecraft is expected to pass approximately 500 kilometers (310 miles) above the moon's surface. The colored lines delineate the regions that will be imaged at differing resolutions, listed in the legend at bottom. Rhea is 1,528 kilometers (949 miles) across. The new high-resolution coverage will examine details on the anti-Saturn hemisphere of Rhea, including two large impact basins there. Cassini previously imaged terrain farther to the south of this at approximately 1 kilometer (0.6 mile) per pixel in August 2005 (see Rhea: Polar View). Imaging scientists also hope to get a high-resolution view of a relatively young 50-kilometer-wide (30-mile) crater on the moon's leading hemisphere (see Great White Splat). Planetary scientists are interested in learning about the compositional makeup of Rhea, other than water ice, as well as the nature of the wispy streaks on the moon's trailing hemisphere. In December, 2004, Cassini revealed that similar bright, wispy markings on Dione are actually a system of braided tectonic fractures (see Dione's Surprise). The map was made from images obtained by both the Cassini and NASA Voyager spacecraft. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging operations center is based at the Space Science Institute in Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . The Cassini imaging team homepage is at http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
| Date |
November 17, 2005 |
|
Tracing Surface Features on
…
| Description |
Tracing Surface Features on Titan -- Close-Ups |
| Full Description |
These images of Titan's south polar region were acquired during Cassini's first distant encounter with the smog-enshrouded moon on July 2, 2004. The spacecraft approached Titan at a distance of about 340,000 kilometers (211,000 miles) during this flyby. This montage contains pairs of close-up images, with the original images (at left) and also versions in which some of the narrow, dark, curvilinear and rectilinear surface features have been traced by red lines (at right). These dark features may be examples of surface channels and deeper crustal structures such as faults. The longest features (in the third and fourth pairs from the top) extend for as much as 1,500 kilometers (930 miles) across the surface and are as narrow as 10 kilometers (6 miles) across. At the bottom left, a single frame shows a small, dark, circular feature, which could be an impact crater. For reference, the white bar at the bottom right is a 1,000-kilometers-long (620 mile) scale bar. A large mosaic of this region and the source of the images in this montage is also available (see Tracing Surface Features on Titan -- Mosaic). The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
| Date |
March 9, 2005 |
|
Hyperion Hoopla
| Description |
Hyperion Hoopla |
| Full Description |
As it loops around Saturn, Cassini periodically gets a good view of Saturn's moon Hyperion. Hyperion chaotically tumbles around in its orbit and is perhaps the largest irregularly-shaped moon in the solar system. New details about this oddball worldlet will certainly come to light in September, 2005, when Cassini is slated to approach Hyperion at a distance of 990 kilometers (615 miles). Hyperion is 266 kilometers (165 miles) across. The images were taken in visible light with the Cassini spacecraft narrow-angle camera in October 2004 and February 2005, at distances ranging from 1.3 to 1.6 million kilometers (808,000 to 994,000 million miles) from Hyperion and at Sun-Hyperion-spacecraft, or phase, angles ranging from 42 to 66 degrees. Resolution in the original images was 8 to 10 kilometers (5 to 6 miles) per pixel. The images have been contrast-enhanced and magnified by a factor of two to aid visibility. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
| Date |
March 18, 2005 |
|
Cassini's Views of Titan
| Description |
Cassini's Views of Titan |
| Full Description |
This false-color composite was created with images taken during the Cassini spacecraft's closest flyby of Titan on April 16, 2005. It was created by combining two infrared images (taken at 938 and 889 nanometers) with a visible light image (taken at 420 nanometers). Green represents areas where Cassini is able to see down to the surface. Red represents areas high in Titan's stratosphere where atmospheric methane is absorbing sunlight. Blue along the moon's outer edge represents visible violet wavelengths at which the upper atmosphere and detached hazes are better seen. A similar false-color image showing the opposite hemisphere of Titan was created from images taken during Cassini's first close flyby of the smoggy moon in October 2004 (see PIA06139). At that time, clouds could be seen near Titan's south pole, but in these more recent observations no clouds are seen. North on Titan is up and tilted 30 degrees to the right. The images used to create this composite were taken with the Cassini spacecraft wide angle camera on April 16, 2005, at distances ranging from approximately 173,000 to 168,200 kilometers (107,500 to 104,500 miles) from Titan and from a Sun-Titan-spacecraft, or phase, angle of 56 degrees. Resolution in the images approximately 10 kilometers per pixel. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . For additional images visit the Cassini imaging team homepage http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
| Date |
April 25, 2005 |
|
Map of Phoebe - December 200
…
| Description |
This global digital map of Saturn's moon Phoebe was created using data taken during the Cassini spacecraft's close flyby of the small moon in June 2004. |
| Full Description |
This global digital map of Saturn's moon Phoebe was created using data taken during the Cassini spacecraft's close flyby of the small moon in June 2004. The map is an equidistant projection and has a scale of 233 meters (764 feet) per pixel. The mean radius of Phoebe used for projection of this map is 107 kilometers (66 miles). The resolution of the map is 8 pixels per degree. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging operations center is based at the Space Science Institute in Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov . The Cassini imaging team homepage is at http://ciclops.org . *Credit:* NASA/JPL/Space Science Institute |
| Date |
December 22, 2005 |
|
Great White Splat
PIA06648
Saturn
Imaging Science Subsystem -
…
| Title |
Great White Splat |
| Original Caption Released with Image |
Looking closely at Saturn's moon Rhea during a somewhat distant flyby, Cassini provides this view of what appears to be a bright, rayed and therefore relatively young crater. This crater was also observed by Cassini at much lower resolution in the fall of 2004 and in spring of 2005. Rhea is 1,528 kilometers (949 miles) across. For comparison, viewing the same crater near the terminator (the line between day and night) would highlight the crater's topography (vertical relief), compared to its brightness, which is highlighted in this view where the Sun is at a higher angle. North on Rhea is up and rotated about 15 degrees to the left. This view shows principally the leading hemisphere on Rhea. The image was taken in visible light with the Cassini spacecraft narrow-angle camera on April 14, 2005, at a distance of approximately 247,000 kilometers (153,000 miles) from Rhea and at a Sun-Rhea-spacecraft, or phase angle of 70 degrees. Resolution in the image is 1 kilometer (0.6 mile) per pixel. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov ]. For additional images visit the Cassini imaging team homepage http://ciclops.org [ http://ciclops.org ]. |
|
Tethys: The Sea Goddess
PIA05420
Saturn
Imaging Science Subsystem -
…
| Title |
Tethys: The Sea Goddess |
| Original Caption Released with Image |
Like a half-full moon, cratered Tethys hangs before the Cassini spacecraft in this narrow angle camera view taken on July 3, 2004. Voyager images showed a large fracture on Tethys about 750 kilometers (470 miles) long (not seen in this view). Cassini will investigate this and other features on Tethys during two planned flybys, the first occurring on September 24, 2005. Tethys is 1,060 kilometers (659 miles) across. The image was taken in visible light from a distance of 1.7 million kilometers (1 million miles) from Tethys and at a Sun-Tethys-spacecraft, or phase angle of about 97 degrees. The image scale is 10 kilometers (6 miles) per pixel. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Cassini-Huygens mission for NASA's Office of Space Science, Washington, D.C. The Cassini orbiter and its two onboard cameras, were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information, about the Cassini-Huygens mission visit, http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov/ ] and the Cassini imaging team home page, http://ciclops.org [ http://ciclops.org/ ]. |
|
Hyperion Hoopla
PIA06608
Saturn
Imaging Science Subsystem -
…
| Title |
Hyperion Hoopla |
| Original Caption Released with Image |
As it loops around Saturn, Cassini periodically gets a good view of Saturn's moon Hyperion. Hyperion chaotically tumbles around in its orbit and is perhaps the largest irregularly-shaped moon in the solar system. New details about this oddball worldlet will certainly come to light in September, 2005, when Cassini is slated to approach Hyperion at a distance of 990 kilometers (615 miles). Hyperion is 266 kilometers (165 miles) across. The images were taken in visible light with the Cassini spacecraft narrow-angle camera in October 2004 and February 2005, at distances ranging from 1.3 to 1.6 million kilometers (808,000 to 994,000 million miles) from Hyperion and at Sun-Hyperion-spacecraft, or phase, angles ranging from 42 to 66 degrees. Resolution in the original images was 8 to 10 kilometers (5 to 6 miles) per pixel. The images have been contrast-enhanced and magnified by a factor of two to aid visibility. For more information about the Cassini-Huygens mission, visit http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov ] and the Cassini imaging team home page, http://ciclops.org [ http://ciclops.org ]. |
|
Tumbling Hyperion
PIA05433
Saturn
Imaging Science Subsystem -
…
| Title |
Tumbling Hyperion |
| Original Caption Released with Image |
This image represents Cassini's best view yet of Saturn's battered and chaotically rotating little moon Hyperion. Hyperion, pronounced "high-PEER-ee-on," is 266 kilometers (165 miles) across. Cassini was, at the time, speeding away from the Saturn system on its initial long, looping orbit. Hyperion has an irregular shape and is known to tumble erratically in its orbit. Cassini is scheduled to fly past this moon on September 26, 2005. This image was taken in visible light with the Cassini spacecraft narrow angle camera on July 15, 2004, from a distance of about 6.7 million kilometers (4.1 million miles) from Hyperion. The Sun- Hyperion-spacecraft, or phase angle of this image is 95 degrees. The image scale is 40 kilometers (25 miles) per pixel. The image has been magnified by a factor of four to aid visibility. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Cassini-Huygens mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission, visit http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov ] and the Cassini imaging team home page, http://ciclops.org [ http://ciclops.org ]. |
|
Cassini?s T4 Flyby
PIA06219
Saturn
Imaging Science Subsystem
| Title |
Cassini?s T4 Flyby |
| Original Caption Released with Image |
This map of Titan's surface illustrates the regions that will be imaged by Cassini during the spacecraft's close flyby of the haze-covered moon on March 31, 2005. At closest approach, the spacecraft is expected to pass approximately 2,400 kilometers (1,500 miles) above the moon?s surface. The colored lines delineate the regions that will be imaged at different resolutions. Images from this encounter will include the eastern portion of territory observed by Cassini?s radar instrument in October 2004 and February 2005. This will be the Cassini cameras' best view to date of this area of Titan. The higher resolution (red) box at the northwestern edge of the covered region targets the area observed by Cassini's synthetic aperture radar at the closest approach point of the February flyby. The Cassini visual and infrared mapping spectrometer experiment will also be targeting this area during the March 31 flyby, yielding coverage of the same part of Titan's surface by three different instruments. The map shows only brightness variations on Titan's surface (the illumination is such that there are no shadows and no shading due to topographic variations). Previous observations indicate that, due to Titan's thick, hazy atmosphere, the sizes of surface features that can be resolved are a few to five times larger than the actual pixel scale labeled on the map. The images for this global map were obtained using a narrow band filter centered at 938 nanometers -- a near-infrared wavelength (invisible to the human eye). At that wavelength, light can penetrate Titan's atmosphere to reach the surface and return through the atmosphere to be detected by the camera. The images have been processed to enhance surface details. It is currently northern winter on Titan, so the moon's high northern latitudes are not illuminated, resulting in the lack of coverage north of 35 degrees north latitude. At 5,150 kilometers (3,200 miles) across, Titan is one of the solar system's largest moons. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission, visit http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov ] and the Cassini imaging team home page, http://ciclops.org [ http://ciclops.org ]. |
|
Cassini's April 16 Flyby of
…
PIA06218
Saturn
Imaging Science Subsystem, V
…
| Title |
Cassini's April 16 Flyby of Titan |
| Original Caption Released with Image |
This map of Titan's surface illustrates the regions that will be imaged by Cassini during the spacecraft's close flyby of the smog-enshrouded moon on April 16, 2005. At closest approach, the spacecraft is expected to pass approximately 1,025 kilometers (640 miles) above the moon's surface. The colored lines delineate the regions that will be imaged at differing resolutions. Images from this encounter will add to those taken during the March 31, 2005, flyby and improve the moderate resolution coverage of this region. The imaging coverage will include the eastern portion of territory observed by Cassini's radar instrument in October 2004 and February 2005, and will provide a way to compare the surface as viewed by the different instruments. Such comparisons (see PIA06222 [ http://photojournal.jpl.nasa.gov/catalog/PIA06222 ]) will provide insight into the nature of Titan's surface. The higher-resolution (yellow boxes) have been spread out around a central mosaic in order to maximize coverage of this region by the visual and infrared mapping spectrometer which will be observing simultaneously with the cameras of the imaging science subsystem. The map shows only brightness variations on Titan's surface (the illumination is such that there are no shadows and no shading due to topographic variations). Previous observations indicate that, due to Titan's thick, hazy atmosphere, the sizes of surface features that can be resolved are a few times larger than the actual pixel scale labeled on the map. The images for this global map were obtained using a narrow band filter centered at 938 nanometers-- a near-infrared wavelength (invisible to the human eye). At this wavelength, light can penetrate Titan's atmosphere to reach the surface and return through the atmosphere to be detected by the camera. The images have been processed to enhance surface details. It is currently northern winter on Titan, so the moon's high northern latitudes are not illuminated, resulting in the lack of coverage north of 35 degrees north latitude. At 5,150 kilometers (3,200 miles) across, Titan is one of the solar system's largest moons. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov ]. For additional images visit the Cassini imaging team homepage http://ciclops.org [ http://ciclops.org ] . |
|
Discovery of the Wavemaker
PIA06239
Sol (our sun)
Imaging Science Subsystem -
…
| Title |
Discovery of the Wavemaker |
| Original Caption Released with Image |
Cassini's celestial sleuthing has paid off with a series of images which confirmed earlier suspicions that a small moon was orbiting within the narrow Keeler gap within Saturn's rings. This view was created by combining six individual, unmagnified frames from the movie sequence of images in which the moon was discovered. The digital composite view improves the overall resolution of the scene compared to that available in any of the single images (see PIA06238 [ http://photojournal.jpl.nasa.gov/catalog/PIA06238 ] for the movie sequence). The Keeler gap is located about 250 kilometers (155 miles) inside the outer edge of the A ring, which is also the outer edge of the bright main rings. The new object is about 7 kilometers (4 miles) across and reflects about 50 percent of the sunlight light that falls upon it -- a brightness that is typical of particles in the nearby rings. The new body has been provisionally named S/2005 S1. Imaging scientists predicted the moon's presence and its orbital distance from Saturn after July 2004, when they saw a set of peculiar spiky and wispy features in the Keeler gap's outer edge. The similarities of the Keeler gap features to those noted in Saturn's F ring and the Encke gap led the scientists to conclude that a small body, a few kilometers across, was lurking in the center of the Keeler gap, awaiting discovery. Also included here is a view of the same scene created by combining six individual, unmagnified frames used in the movie sequence. This digital composite view improves the overall resolution of the scene compared to that available in any of the single images. These images were obtained with the Cassini spacecraft narrow-angle camera on May 1, 2005, at a distance of approximately 1.1 million kilometers (708,000 miles) from Saturn. Resolution in the original image was 8 kilometers (5 miles) per pixel. The images in the movie sequence have been magnified in (the vertical direction only) by a factor of two to aid visibility of features caused within the gap by the moonlet. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov ]. For additional images visit the Cassini imaging team homepage http://ciclops.org [ http://ciclops.org ]. |
|
Prime Time for Rhea
PIA07756
Saturn
Imaging Science Subsystem
| Title |
Prime Time for Rhea |
| Original Caption Released with Image |
This map of the surface of Saturn's moon, Rhea, illustrates the regions that will be imaged by Cassini during the spacecraft's close flyby of the moon on Nov. 26, 2005. At closest approach, the spacecraft is expected to pass approximately 500 kilometers (310 miles) above the moon's surface. The colored lines delineate the regions that will be imaged at differing resolutions, listed in the legend at bottom. Rhea is 1,528 kilometers (949 miles) across. The new high-resolution coverage will examine details on the anti-Saturn hemisphere of Rhea, including two large impact basins there. Cassini previously imaged terrain farther to the south of this at approximately 1 kilometer (0.6 mile) per pixel in August 2005 (see PIA07566 [ http://photojournal.jpl.nasa.gov/catalog/PIA07566 ]). Imaging scientists also hope to get a high-resolution view of a relatively young 50-kilometer-wide (30-mile) crater on the moon's leading hemisphere (see PIA06648 [ http://photojournal.jpl.nasa.gov/catalog/PIA06648 ]). Planetary scientists are interested in learning about the compositional makeup of Rhea, other than water ice, as well as the nature of the wispy streaks on the moon's trailing hemisphere. In December, 2004, Cassini revealed that similar bright, wispy markings on Dione are actually a system of braided tectonic fractures (see PIA06162 [ http://photojournal.jpl.nasa.gov/catalog/PIA06162 ]). The map was made from images obtained by both the Cassini and NASA Voyager spacecraft. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging operations center is based at the Space Science Institute in Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov ]. The Cassini imaging team homepage is at http://ciclops.org [ http://ciclops.org ]. |
|
Discovery of the Wavemaker (
…
PIA06238
Sol (our sun)
Imaging Science Subsystem -
…
| Title |
Discovery of the Wavemaker (animation) |
| Original Caption Released with Image |
Cassini's celestial sleuthing has paid off with this time-lapse series of images which confirmed earlier suspicions that a small moon was orbiting within the narrow Keeler gap of Saturn's rings. The movie sequence, which consists of 12 images taken over 16 minutes while Cassini gazed down upon the sunlit side of the A ring, shows a tiny moon orbiting in the center of the Keeler gap, churning up waves in the gap edges as it goes. The pattern of waves travels with the moon in its orbit. The Keeler gap is located about 250 kilometers (155 miles) inside the outer edge of the A ring, which is also the outer edge of the bright main rings. The new object is about 7 kilometers across (4 miles) and reflects about 50 percent of the sunlight that falls upon it -- a brightness that is typical of particles in the nearby rings. The new body has been provisionally named S/2005 S1. Imaging scientists predicted the moon's presence and its orbital distance from Saturn after July 2004, when they saw a set of peculiar spiky and wispy features in the Keeler gap's outer edge. The similarities of the Keeler gap features to those noted in Saturn's F ring and the Encke gap led the scientists to conclude that a small body, a few kilometers across, was lurking in the center of the Keeler gap, awaiting discovery. Also included here is a view of the same scene created by combining six individual, unmagnified frames used in the movie sequence. This digital composite view improves the overall resolution of the scene compared to that available in any of the single images. The images in this movie sequence were obtained with the Cassini spacecraft narrow-angle camera on May 1, 2005, at a distance of approximately 1.1 million kilometers (708,000 miles) from Saturn. Resolution in the original image was 8 kilometers (5 miles) per pixel. The images in the movie sequence have been magnified in (the vertical direction only) by a factor of two to aid visibility of features caused within the gap by the moonlet. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov ]. For additional images visit the Cassini imaging team homepage http://ciclops.org [ http://ciclops.org ]. |
|
Cassini's Views of Titan: Fa
…
PIA06229
Saturn
Imaging Science Subsystem -
…
| Title |
Cassini's Views of Titan: False Color Composite |
| Original Caption Released with Image |
This false-color composite was created with images taken during the Cassini spacecraft's closest flyby of Titan on April 16, 2005. It was created by combining two infrared images (taken at 938 and 889 nanometers) with a visible light image (taken at 420 nanometers). Green represents areas where Cassini is able to see down to the surface. Red represents areas high in Titan's stratosphere where atmospheric methane is absorbing sunlight. Blue along the moon's outer edge represents visible violet wavelengths at which the upper atmosphere and detached hazes are better seen. A similar false-color image showing the opposite hemisphere of Titan was created from images taken during Cassini's first close flyby of the smoggy moon in October 2004 (see PIA06139 [ http://photojournal.jpl.nasa.gov/catalog/PIA06139 ]). At that time, clouds could be seen near Titan's south pole, but in these more recent observations no clouds are seen. North on Titan is up and tilted 30 degrees to the right. The images used to create this composite were taken with the Cassini spacecraft wide angle camera on April 16, 2005, at distances ranging from approximately 173,000 to 168,200 kilometers (107,500 to 104,500 miles) from Titan and from a Sun-Titan-spacecraft, or phase, angle of 56 degrees. Resolution in the images approximately 10 kilometers per pixel. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission, visit http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov ] and the Cassini imaging team home page, http://ciclops.org [ http://ciclops.org ]. |
|
New Titan Territory
PIA06220
Saturn
Imaging Science Subsystem -
…
| Title |
New Titan Territory |
| Original Caption Released with Image |
Although the Huygens probe has now pierced the murky skies of Titan and landed on its surface, much of the moon remains for the Cassini spacecraft to explore. Titan continues to present exciting puzzles. This view of Titan uncovers new territory not previously seen at this resolution by Cassini's cameras. The view is a composite of four nearly identical wide-angle camera images, all taken using a filter sensitive to wavelengths of infrared light centered at 939 nanometers. The individual images have been combined and contrast-enhanced in such a way as to sharpen surface features and enhance overall brightness variations. Some of the territory in this view was covered by observations made by the Cassini synthetic aperture radar in October 2004 and February 2005. At large scales, there are similarities between the views taken by the imaging science subsystem cameras and the radar results, but there also are differences. For example, the center of the floor of the approximately 80-kilometer-wide (50-mile) crater identified by the radar team in February (near the center in this image, see PIA07368 [ http://photojournal.jpl.nasa.gov/catalog/PIA07368 ] for the radar image) is relatively bright at 2.2 centimeters, the wavelength of the radar experiment, but dark in the near-infrared wavelengths used here by Cassini's optical cameras. This brightness difference is also apparent for some of the surrounding material and could indicate differences in surface composition or roughness. Such comparisons, as well as information from observations acquired by the visual and infrared mapping spectrometer at the same time as the optical camera observations, are important in trying to understand the nature of Titan's surface materials. The images for this composite view were taken with the Cassini spacecraft on March 31, 2005, at distances ranging from approximately 146,000 to 130,000 kilometers (91,000 to 81,000 miles) from Titan and at a Sun-Titan-spacecraft, or phase, angle of about 57 degrees. The image scale is 8 kilometers (5 miles) per pixel. Previous observations indicate that, due to Titan's thick, hazy atmosphere, the sizes of surface features that can be resolved are a few times larger than the actual pixel scale. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission, visit http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov ] and the Cassini imaging team home page, http://ciclops.org [ http://ciclops.org ]. |
|
Cassini's Three Views of Tit
…
PIA06227
Saturn
Imaging Science Subsystem -
…
| Title |
Cassini's Three Views of Titan |
| Original Caption Released with Image |
). At that time, clouds could be seen near Titan's south pole, but in these more recent observations no clouds are seen. North on Titan is up and tilted 30 degrees to the right. All of these images were taken with the Cassini spacecraft wide angle camera on April 16, 2005, at distances ranging from approximately 173,000 to 168,200 kilometers (107,500 to 104,500 miles) from Titan and from a Sun-Titan-spacecraft, or phase, angle of 56 degrees. Resolution in the images approximately 10 kilometers per pixel. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging team is based at the Space Science Institute, Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov ]. For additional images visit the Cassini imaging team homepage http://ciclops.org [ http://ciclops.org ] ., These three views of Titan from the Cassini spacecraft illustrate how different the same place can look in different wavelengths of light. Cassini's cameras have numerous filters that reveal features above and beneath the shroud of Titan's atmosphere. The first image, a natural color composite, is a combination of images taken through three filters that are sensitive to red, green and violet light. It shows approximately what Titan would look like to the human eye: a hazy orange globe surrounded by a tenuous, bluish haze. The orange color is due to the hydrocarbon particles which make up Titan's atmospheric haze. This obscuring haze was particularly frustrating for planetary scientists following the NASA Voyager mission encounters in 1980-81. Fortunately, Cassini is able to pierce Titan's veil at infrared wavelengths. A single view of this composite is also available (see PIA06230 [ http://photojournal.jpl.nasa.gov/catalog/PIA06230 ]). The second, monochrome view shows what Titan looks like at 938 nanometers, a near-infrared wavelength that allows Cassini to see through the hazy atmosphere and down to the surface. The view was created by combining three separate images taken with this filter, in order to improve the visibility of surface features. The variations in brightness on the surface are real differences in the reflectivity of the materials on Titan. A single view of this image is also available (see PIA06228 [ http://photojournal.jpl.nasa.gov/catalog/PIA06228 ]). The third view, which is a false-color composite, was created by combining two infrared images (taken at 938 and 889 nanometers) with a visible light image (taken at 420 nanometers). Green represents areas where Cassini is able to see down to the surface. Red represents areas high in Titan's stratosphere where atmospheric methane is absorbing sunlight. Blue along the moon's outer edge represents visible violet wavelengths at which the upper atmosphere and detached hazes are better seen. A single view of this composite is also available (see PIA06229 [ http://photojournal.jpl.nasa.gov/catalog/PIA06229 ]). A similar false-color image showing the opposite hemisphere of Titan was created from images taken during Cassini's first close flyby of the smoggy moon in October 2004 (see PIA06139 [ http://photojournal.jpl.nasa.gov/catalog/PIA06139 ] |
|
Map of Phoebe -- December 20
…
PIA07775
Saturn
Imaging Science Subsystem
| Title |
Map of Phoebe -- December 2005 |
| Original Caption Released with Image |
This global digital map of Saturn's moon Phoebe was created using data taken during the Cassini spacecraft's close flyby of the small moon in June 2004. The map is an equidistant projection and has a scale of 233 meters (764 feet) per pixel. The mean radius of Phoebe used for projection of this map is 107 kilometers (66 miles). The resolution of the map is 8 pixels per degree. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging operations center is based at the Space Science Institute in Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov ]. The Cassini imaging team homepage is at http://ciclops.org [ http://ciclops.org ]. |
|
Faint Southern Clouds
PIA07597
Saturn
Imaging Science Subsystem -
…
| Title |
Faint Southern Clouds |
| Original Caption Released with Image |
This clear-filter view of Saturn's moon Titan reveals a region of cloud activity at high southern latitudes. Titan is 5,150 kilometers (3,200 miles) across. Cassini observations have generally been consistent with Earth-based observations that indicate the south-polar fields of clouds that had been observed frequently in 2004 haven't been present in 2005. This image was taken in visible light with the Cassini spacecraft narrow-angle camera on Aug. 31, 2005, at a distance of approximately 3.3 million kilometers (2 million miles) from Titan and at a Sun-Titan-spacecraft, or phase, angle of 70 degrees. The image scale is 20 kilometers (12 miles) per pixel. North on Titan is up and rotated about 20 degrees to the left. The view has been mildly enhanced to make the cloud feature more easily visible. The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C. The Cassini orbiter and its two onboard cameras were designed, developed and assembled at JPL. The imaging operations center is based at the Space Science Institute in Boulder, Colo. For more information about the Cassini-Huygens mission visit http://saturn.jpl.nasa.gov [ http://saturn.jpl.nasa.gov ]. For additional images visit the Cassini imaging team homepage http://ciclops.org [ http://ciclops.org ]. |
|
Spitzer Spies Spectacular So
…
PIA07899
Infrared Array Camera (IRAC)
…
| Title |
Spitzer Spies Spectacular Sombrero |
| Original Caption Released with Image |
Figure 1 NASA's Spitzer Space Telescope set its infrared eyes on one of the most famous objects in the sky, Messier 104, also called the Sombrero galaxy. In this striking infrared picture, Spitzer sees an exciting new view of a galaxy that in visible light has been likened to a "sombrero," but here looks more like a "bulls-eye." Recent observations using Spitzer's infrared array camera uncovered the bright, smooth ring of dust circling the galaxy, seen in red. In visible light, because this galaxy is seen nearly edge-on, only the near rim of dust can be clearly seen in silhouette. Spitzer's full view shows the disk is warped, which is often the result of a gravitational encounter with another galaxy, and clumpy areas spotted in the far edges of the ring indicate young star-forming regions. Spitzer's infrared view of the starlight from this galaxy, seen in blue, can pierce through obscuring murky dust that dominates in visible light. As a result, the full extent of the bulge of stars and an otherwise hidden disk of stars within the dust ring are easily seen. The Sombrero galaxy is located some 28 million light years away. Viewed from Earth, it is just six degrees south of its equatorial plane. Spitzer detected infrared emission not only from the ring, but from the center of the galaxy too, where there is a huge black hole, believed to be a billion times more massive than our Sun. This picture is composed of four images taken at 3.6 (blue), 4.5 (green), 5.8 (orange), and 8.0 (red) microns. The contribution from starlight (measured at 3.6 microns) has been subtracted from the 5.8 and 8-micron images to enhance the visibility of the dust features. In figure 1, the new picture of Messier 104 combines a recent infrared observation from NASA's Spitzer Space Telescope with a well-known visible light image from the Hubble Space Telescope. In the Hubble Space Telescope's visible light image (lower left panel), only the near rim of dust can be clearly seen in silhouette. Recent observations using Spitzer's infrared array camera (lower right panel) uncovered the bright, smooth ring of dust circling the galaxy, seen in red. Spitzer's infrared view of the starlight, pierced through the obscuring dust, is easily seen, along with the bulge of stars and an otherwise hidden disk of stars within the dust ring. Spitzer's full view shows the disk is warped, which is often the result of a gravitational encounter with another galaxy, and clumpy areas spotted in the far edges of the ring indicate young star-forming regions. In figure 2, the infrared space telescope adds new detail to the galaxy's hallmark characteristics, such as the bright, bulbous core encircled by its thick dust lanes. Since infrared light can trace the dust, the dark, murky ring glows brilliantly in infrared. The clumpy dust ring also becomes transparent to starlight in infrared, allowing a clear view of the inner disk of stars within the dust ring. Viewed from Earth, the, Sombrero galaxy is seen nearly edge-on, just six degrees away from its equatorial plane. This spiral galaxy is located 28 million light years away and is 50,000 light-years across. The Sombrero is one of the most massive objects at the southern edge of the Virgo cluster of galaxies, and is equal in size to 800 billion Suns. It hosts a rich system of nearly 2,000 globular clusters, 10 times as many as orbit our Milky Way galaxy. It is also interesting that the Sombrero galaxy may harbor a super-massive black hole, accounting for the electromagnetic glow emitted from its center. The Hubble images were taken by the Hubble Heritage Team in May-June 2003 with the space telescope's advanced camera for surveys. Spitzer's images were taken in June 2004 and January 2005 as part of the Spitzer Infrared Nearby Galaxies Survey, using the telescope's infrared array camera. The survey is one of the six Spitzer Legacy Science projects, designed to reveal how stars are formed in different types of galaxies, and to provide an atlas of galaxy images and spectra for future archival investigations. The Sombrero is one of 75 galaxies being observed by the survey team. In this image, blue-cyan corresponds to the Hubble visible-light view, while the Spitzer 3.6-4.5 micron light is green and 8.0 micron light is red. Starlight in this Spitzer image (measured at 3.6 microns) has been subtracted from the 8-micron image to enhance the visibility of the dust features. In figure 3, NASA's Hubble Space Telescope has trained its sharp eye on one of the universe's most stately and photogenic galaxies, Messier 104. The galaxy's hallmark is a brilliant white, bulbous core encircled by the thick dust lanes comprising the spiral structure of the galaxy. As seen from Earth, the galaxy is tilted nearly edge-on. We view it from just six degrees north of its equatorial plane. This brilliant galaxy was named the Sombrero because in visible light it resembles a broad rimmed and high-topped Mexican hat. M104 is just beyond the limit of the naked eye, but is easily seen through small telescopes. It lies at the southern edge of the rich Virgo cluster of galaxies. It is one of the most massive objects in that group, equivalent to 800 billion suns. The galaxy is 50,000 light-years across and is located 28 million light-years from Earth. Hubble easily resolves M104's rich system of 2,000 globular clusters-believed to be 10 times as many as orbit our Milky Way galaxy. The ages of the clusters are similar to those of the clusters in the Milky Way, ranging from 10-13 billion years. A smaller disk is embedded in the bright core of M104, and is tilted relative to the large disk. X-ray emission hints that there is material falling into the compact core, where a black hole as massive as 1 billion suns resides. The Hubble Heritage Team took these observations in May-June 2003 with the space telescope's advanced camera for surveys. Images were taken in three filters (red, green, and blue), to yield a natural-color image. The team took six pictures of the galaxy and then stitched them together to create the final composite image. This magnificent galaxy has a diameter that is nearly one-fifth the diameter of the full Moon. The movie shifts from the well-known visible-light picture of Messier 104 taken by the Hubble Space Telescope to infrared views from NASA's Spitzer Space Telescope. Messier (click on the browse image above for download option). |
|
Spitzer Spies Spectacular So
…
PIA07899
Infrared Array Camera (IRAC)
…
| Title |
Spitzer Spies Spectacular Sombrero |
| Original Caption Released with Image |
Figure 1 NASA's Spitzer Space Telescope set its infrared eyes on one of the most famous objects in the sky, Messier 104, also called the Sombrero galaxy. In this striking infrared picture, Spitzer sees an exciting new view of a galaxy that in visible light has been likened to a "sombrero," but here looks more like a "bulls-eye." Recent observations using Spitzer's infrared array camera uncovered the bright, smooth ring of dust circling the galaxy, seen in red. In visible light, because this galaxy is seen nearly edge-on, only the near rim of dust can be clearly seen in silhouette. Spitzer's full view shows the disk is warped, which is often the result of a gravitational encounter with another galaxy, and clumpy areas spotted in the far edges of the ring indicate young star-forming regions. Spitzer's infrared view of the starlight from this galaxy, seen in blue, can pierce through obscuring murky dust that dominates in visible light. As a result, the full extent of the bulge of stars and an otherwise hidden disk of stars within the dust ring are easily seen. The Sombrero galaxy is located some 28 million light years away. Viewed from Earth, it is just six degrees south of its equatorial plane. Spitzer detected infrared emission not only from the ring, but from the center of the galaxy too, where there is a huge black hole, believed to be a billion times more massive than our Sun. This picture is composed of four images taken at 3.6 (blue), 4.5 (green), 5.8 (orange), and 8.0 (red) microns. The contribution from starlight (measured at 3.6 microns) has been subtracted from the 5.8 and 8-micron images to enhance the visibility of the dust features. In figure 1, the new picture of Messier 104 combines a recent infrared observation from NASA's Spitzer Space Telescope with a well-known visible light image from the Hubble Space Telescope. In the Hubble Space Telescope's visible light image (lower left panel), only the near rim of dust can be clearly seen in silhouette. Recent observations using Spitzer's infrared array camera (lower right panel) uncovered the bright, smooth ring of dust circling the galaxy, seen in red. Spitzer's infrared view of the starlight, pierced through the obscuring dust, is easily seen, along with the bulge of stars and an otherwise hidden disk of stars within the dust ring. Spitzer's full view shows the disk is warped, which is often the result of a gravitational encounter with another galaxy, and clumpy areas spotted in the far edges of the ring indicate young star-forming regions. In figure 2, the infrared space telescope adds new detail to the galaxy's hallmark characteristics, such as the bright, bulbous core encircled by its thick dust lanes. Since infrared light can trace the dust, the dark, murky ring glows brilliantly in infrared. The clumpy dust ring also becomes transparent to starlight in infrared, allowing a clear view of the inner disk of stars within the dust ring. Viewed from Earth, the, Sombrero galaxy is seen nearly edge-on, just six degrees away from its equatorial plane. This spiral galaxy is located 28 million light years away and is 50,000 light-years across. The Sombrero is one of the most massive objects at the southern edge of the Virgo cluster of galaxies, and is equal in size to 800 billion Suns. It hosts a rich system of nearly 2,000 globular clusters, 10 times as many as orbit our Milky Way galaxy. It is also interesting that the Sombrero galaxy may harbor a super-massive black hole, accounting for the electromagnetic glow emitted from its center. The Hubble images were taken by the Hubble Heritage Team in May-June 2003 with the space telescope's advanced camera for surveys. Spitzer's images were taken in June 2004 and January 2005 as part of the Spitzer Infrared Nearby Galaxies Survey, using the telescope's infrared array camera. The survey is one of the six Spitzer Legacy Science projects, designed to reveal how stars are formed in different types of galaxies, and to provide an atlas of galaxy images and spectra for future archival investigations. The Sombrero is one of 75 galaxies being observed by the survey team. In this image, blue-cyan corresponds to the Hubble visible-light view, while the Spitzer 3.6-4.5 micron light is green and 8.0 micron light is red. Starlight in this Spitzer image (measured at 3.6 microns) has been subtracted from the 8-micron image to enhance the visibility of the dust features. In figure 3, NASA's Hubble Space Telescope has trained its sharp eye on one of the universe's most stately and photogenic galaxies, Messier 104. The galaxy's hallmark is a brilliant white, bulbous core encircled by the thick dust lanes comprising the spiral structure of the galaxy. As seen from Earth, the galaxy is tilted nearly edge-on. We view it from just six degrees north of its equatorial plane. This brilliant galaxy was named the Sombrero because in visible light it resembles a broad rimmed and high-topped Mexican hat. M104 is just beyond the limit of the naked eye, but is easily seen through small telescopes. It lies at the southern edge of the rich Virgo cluster of galaxies. It is one of the most massive objects in that group, equivalent to 800 billion suns. The galaxy is 50,000 light-years across and is located 28 million light-years from Earth. Hubble easily resolves M104's rich system of 2,000 globular clusters-believed to be 10 times as many as orbit our Milky Way galaxy. The ages of the clusters are similar to those of the clusters in the Milky Way, ranging from 10-13 billion years. A smaller disk is embedded in the bright core of M104, and is tilted relative to the large disk. X-ray emission hints that there is material falling into the compact core, where a black hole as massive as 1 billion suns resides. The Hubble Heritage Team took these observations in May-June 2003 with the space telescope's advanced camera for surveys. Images were taken in three filters (red, green, and blue), to yield a natural-color image. The team took six pictures of the galaxy and then stitched them together to create the final composite image. This magnificent galaxy has a diameter that is nearly one-fifth the diameter of the full Moon. The movie shifts from the well-known visible-light picture of Messier 104 taken by the Hubble Space Telescope to infrared views from NASA's Spitzer Space Telescope. Messier (click on the browse image above for download option). |
|
Spitzer Spies Spectacular So
…
PIA07899
Infrared Array Camera (IRAC)
…
| Title |
Spitzer Spies Spectacular Sombrero |
| Original Caption Released with Image |
Figure 1 NASA's Spitzer Space Telescope set its infrared eyes on one of the most famous objects in the sky, Messier 104, also called the Sombrero galaxy. In this striking infrared picture, Spitzer sees an exciting new view of a galaxy that in visible light has been likened to a "sombrero," but here looks more like a "bulls-eye." Recent observations using Spitzer's infrared array camera uncovered the bright, smooth ring of dust circling the galaxy, seen in red. In visible light, because this galaxy is seen nearly edge-on, only the near rim of dust can be clearly seen in silhouette. Spitzer's full view shows the disk is warped, which is often the result of a gravitational encounter with another galaxy, and clumpy areas spotted in the far edges of the ring indicate young star-forming regions. Spitzer's infrared view of the starlight from this galaxy, seen in blue, can pierce through obscuring murky dust that dominates in visible light. As a result, the full extent of the bulge of stars and an otherwise hidden disk of stars within the dust ring are easily seen. The Sombrero galaxy is located some 28 million light years away. Viewed from Earth, it is just six degrees south of its equatorial plane. Spitzer detected infrared emission not only from the ring, but from the center of the galaxy too, where there is a huge black hole, believed to be a billion times more massive than our Sun. This picture is composed of four images taken at 3.6 (blue), 4.5 (green), 5.8 (orange), and 8.0 (red) microns. The contribution from starlight (measured at 3.6 microns) has been subtracted from the 5.8 and 8-micron images to enhance the visibility of the dust features. In figure 1, the new picture of Messier 104 combines a recent infrared observation from NASA's Spitzer Space Telescope with a well-known visible light image from the Hubble Space Telescope. In the Hubble Space Telescope's visible light image (lower left panel), only the near rim of dust can be clearly seen in silhouette. Recent observations using Spitzer's infrared array camera (lower right panel) uncovered the bright, smooth ring of dust circling the galaxy, seen in red. Spitzer's infrared view of the starlight, pierced through the obscuring dust, is easily seen, along with the bulge of stars and an otherwise hidden disk of stars within the dust ring. Spitzer's full view shows the disk is warped, which is often the result of a gravitational encounter with another galaxy, and clumpy areas spotted in the far edges of the ring indicate young star-forming regions. In figure 2, the infrared space telescope adds new detail to the galaxy's hallmark characteristics, such as the bright, bulbous core encircled by its thick dust lanes. Since infrared light can trace the dust, the dark, murky ring glows brilliantly in infrared. The clumpy dust ring also becomes transparent to starlight in infrared, allowing a clear view of the inner disk of stars within the dust ring. Viewed from Earth, the, Sombrero galaxy is seen nearly edge-on, just six degrees away from its equatorial plane. This spiral galaxy is located 28 million light years away and is 50,000 light-years across. The Sombrero is one of the most massive objects at the southern edge of the Virgo cluster of galaxies, and is equal in size to 800 billion Suns. It hosts a rich system of nearly 2,000 globular clusters, 10 times as many as orbit our Milky Way galaxy. It is also interesting that the Sombrero galaxy may harbor a super-massive black hole, accounting for the electromagnetic glow emitted from its center. The Hubble images were taken by the Hubble Heritage Team in May-June 2003 with the space telescope's advanced camera for surveys. Spitzer's images were taken in June 2004 and January 2005 as part of the Spitzer Infrared Nearby Galaxies Survey, using the telescope's infrared array camera. The survey is one of the six Spitzer Legacy Science projects, designed to reveal how stars are formed in different types of galaxies, and to provide an atlas of galaxy images and spectra for future archival investigations. The Sombrero is one of 75 galaxies being observed by the survey team. In this image, blue-cyan corresponds to the Hubble visible-light view, while the Spitzer 3.6-4.5 micron light is green and 8.0 micron light is red. Starlight in this Spitzer image (measured at 3.6 microns) has been subtracted from the 8-micron image to enhance the visibility of the dust features. In figure 3, NASA's Hubble Space Telescope has trained its sharp eye on one of the universe's most stately and photogenic galaxies, Messier 104. The galaxy's hallmark is a brilliant white, bulbous core encircled by the thick dust lanes comprising the spiral structure of the galaxy. As seen from Earth, the galaxy is tilted nearly edge-on. We view it from just six degrees north of its equatorial plane. This brilliant galaxy was named the Sombrero because in visible light it resembles a broad rimmed and high-topped Mexican hat. M104 is just beyond the limit of the naked eye, but is easily seen through small telescopes. It lies at the southern edge of the rich Virgo cluster of galaxies. It is one of the most massive objects in that group, equivalent to 800 billion suns. The galaxy is 50,000 light-years across and is located 28 million light-years from Earth. Hubble easily resolves M104's rich system of 2,000 globular clusters-believed to be 10 times as many as orbit our Milky Way galaxy. The ages of the clusters are similar to those of the clusters in the Milky Way, ranging from 10-13 billion years. A smaller disk is embedded in the bright core of M104, and is tilted relative to the large disk. X-ray emission hints that there is material falling into the compact core, where a black hole as massive as 1 billion suns resides. The Hubble Heritage Team took these observations in May-June 2003 with the space telescope's advanced camera for surveys. Images were taken in three filters (red, green, and blue), to yield a natural-color image. The team took six pictures of the galaxy and then stitched them together to create the final composite image. This magnificent galaxy has a diameter that is nearly one-fifth the diameter of the full Moon. The movie shifts from the well-known visible-light picture of Messier 104 taken by the Hubble Space Telescope to infrared views from NASA's Spitzer Space Telescope. Messier (click on the browse image above for download option). |
|
|
