Narrow Search
 
 
Advanced Search

Browse All : Mars of Washington from 2002

Printer Friendly
1 2 3
1-50 of 134
     
     
Eberswalde Delta in High Res …
title Eberswalde Delta in High Resolution
Description Scientifically, perhaps the most important result from use of the Mars Orbiter Camera on NASA's Mars Global Surveyor during that spacecraft's extended mission has been the discovery and documentation of a fossil delta. The feature is located in a crater northeast of Holden Crater, near 24.0 degrees south latitude, 33.7 degrees west longitude. Since the announcement of the discovery of the delta in November 2003, the International Astronomical Union has provided a provisional name (pending final approval) for the crater in which the landforms occur. The crater has been named Eberswalde, for a town in Germany. This image offers a higher-resolution view of a portion of the fossil delta than any seen earlier. North is up. At the bottom of the frame, the image includes the north end of a looping, inverted, meandering channel. The image covers an area of about 3 by 3 kilometers (1.9 x 1.9 miles). It was produced using a technique called "compensated pitch and roll targeted observation," in which the rotation rate of the spacecraft is adjusted to match the ground speed under the camera. At full resolution, this map-projected image is at 50 centimeters (20 inches) per pixel. Additional images from Mars Orbiter Camera provide some context and show a nearby portion of the fossil delta's inverted channels at a spatial scale of 1.5 meters (about 5 feet) per pixel. The relative positions of these three images are indicated in a mosaic image of the entire delta, for which the unmarked version was released in November 2003. The first Mars Orbiter Camera narrow angle images of some of the landforms in the delta were acquired in 2000, during the Mars Global Surveyor primary mission, but those pictures did not show very well the unambiguous inverted channel forms. Not until the second Earth year of the orbiter's extended mission were the deltaic features recognized in Mars Orbiter Camera images obtained in March and June of 2002. Following the initial observations in 2002, the Mars Orbiter Camera team began a systematic effort to map the entire Eberswalde Crater delta. Most of this imaging required slewing the whole spacecraft in a technique called "roll only targeted observation" so that it pointed the camera toward the feature. In this way, the camera team was able to build up a mosaic of the delta much more quickly than would have been the case if the team had simply relied upon chance crossing of the delta by the orbiter's usual ground track. This technique was not employed during Mars Global Surveyor's primary mission, except in the search for Mars Polar Lander, but became a routine part of the tool kit during the extended mission. Even with the "roll only targeted observation" technique, it took more than one Earth year to build up a complete mosaic of images of the delta. In the meantime, the first data showing the deltaic landforms were archived and released to the public and scientific community, long before the Mars Orbiter Camera team's, analysis and mosaic were complete. Some scientists began independent analyses of the landform at that time. The initial analysis and announcement of the feature was finally published in November 2003. The Eberswalde delta provides the first clear, "smoking gun" evidence that some valleys on Mars experienced persistent flow of a liquid with the physical properties of water over an extended period of time, as do rivers on Earth. In addition, because the delta today is lithified -- that is, hardened to form rock -- it provided the first unambiguous evidence that some martian sedimentary rocks were deposited in a liquid (presumably, water) environment. The presence of meandering channels, a cut-off meander, and crisscrossing channels at different elevations (one above the other), provided the clear geologic evidence for these interpretations. After the sediments were deposited to form the delta, the material was further buried by other materials -- probably sediments -- that are no longer present. The entire package of buried material became cemented and hardened to form rock. Later, erosive processes such as wind stripped away the overlying rock, re-exposing the delta. Now preserved essentially as a fossil, the former floors of channels in the delta became inverted, to form ridges, by erosion. Channels can be inverted by erosion on both Earth and Mars. Usually this happens when the channel floor, or the material filling the channel, is harder to erode than the surrounding material into which the channel was cut. In some cases, the channels on Earth and Mars have been filled by lava to make them more resistant to erosion. In the case of Eberswalde, there are no lava flows, instead, the channel floors may have been rendered resistant to erosion either by being better-cemented than the surrounding material, or composed of coarser-grained sediment (such as sand and gravel as opposed to silt), or both. The Mars Orbiter Camera was built and is operated by Malin Space Science Systems, San Diego, Calif. Mars Global Surveyor left Earth on Nov. 7, 1996, and began orbiting Mars on Sept. 12, 1997. JPL, a division of the California Institute of Technology, Pasadena, manages Mars Global Surveyor for NASA's Science Mission Directorate, Washington. Credit: NASA/JPL/MSSS
he third figure shows before …
title he third figure shows before-and-after narrow-angle camera views of the impact site.
Description Figure C - Image credit: NASA/JPL/Malin Space Science Systems Browse Image | Large - annotated (120 Kb) | Large (120 Kb) Taken together, the Mars Odyssey and Mars Global Surveyor data indicate that this impact occurred some time between June 30, 2002, and May 7, 2003. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by NASA's Jet Propulsion Laboratory, Pasadena, Calif., a division of the California Institute of Technology, also in Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ].
New Gullies on Martian Sand …
title New Gullies on Martian Sand Dune
Description One of the many mysteries associated with martian geology is the origin of gullies found at latitudes poleward of 30 degrees latitude. Most of these gullies are found within craters or other depressions, and appear to be related to the bedrock. Several hypotheses have been proposed for their origin, including groundwater seepage and melting at the base of a dust-mantled snow pack. Some middle-latitude gullies are found on sand dunes. These gullies appear to be different from those found on the slopes of craters, but generally have been interpreted to form by similar processes. In the present martian environment, it is difficult to introduce water to the surface. The temperature and atmospheric pressure may permit water to exist, but the rate of heating of the ground and atmosphere, and the amount of energy available to warm the ground or melt snow, are not conducive to such processes. An alternative process of gully formation on these sand dunes involves frozen carbon dioxide trapped in the winter by windblown sand, then subliming rapidly enough for the escaping carbon-dioxide gas to make the sand flow as a gully-cutting fluid. As part of extended-mission science investigation using the Mars Orbiter Camera on NASA's Mars Global Surveyor spacecraft, the camera team is re-imaging many locations where previous observations revealed gullies. The intent is to see if gully-forming processes are operating on Mars at the present time. The team has found one location where a new gully formed on a dune in an unnamed crater in the Hellespontus region of Mars, west of the Hellas Basin. This pair of narrow-angle images from the Mars Orbiter Camera shows the dune as it appeared on July 17, 2002, (left) and as it appeared on April 27, 2005, (right). The nearly three Earth years of intervening time amount to about 1.4 Mars years. During this period, a couple of gullies formed on the dune slip face. It is critical to recognize that the 2002 image was obtained at a time of year when the incident sunlight was coming in from a lower angle, relative to the horizon, than in the 2005 image. If the gullies had been present in 2002, their appearance would be sharper and more pronounced than they are in the 2005 image. The gullies simply did not exist on July 17, 2002. The steep walls of the gully alcove and channels suggests that the sand in this dune is somewhat cohesive, an observation common among martian sand dunes seen by the Mars Orbiter Camera over the past eight years. Wider context for the dune is shown in a mosaic of two images from the Thermal Emission Imaging System on NASA's Mars Odyssey orbiter (insert MOC2-1212a), encompassing the dark-toned sand dune field on the floor of a crater located near 49.8 degrees south latitude, 325.4 degrees west longitude. In this image, north is approximately up and sunlight illuminates the scene from the upper left. Based on earlier observations of other dune fields with gullies, camera-team scientists suspect that, these gullies form by a process other than water fluidization. An image of a dune in Russell Crater, taken by the Mars Orbiter Camera in March 2001, (insert MOC2-1212c) shows how the morphology of the dune's slip face changes with direction: Gullies form on pole-facing slopes (southwest in this case), while normal slip-face avalanche features ("avalanches" in the figure) are seen on the equator-facing slopes (northwest in this case). Most of the dunes that have gullies on them are located in the Hellespontus and Noachis regions, and are frost-covered during the winter. Based on experience in Antarctica and other cold regions on Earth, it is known that snow and ice can be incorporated into dunes during winter. An example is the layering of snow buried in a sand dune in Victoria Valley, Antarctica, seen in a photograph taken by Michael Malin during the austral summer of 1982-1983 (insert MOC2-1212d). Active sand dunes in cold regions such as Antarctica and northern Canada commonly incorporate wintertime snow as new sand avalanches down a slip face and covers the frozen material. A similar process might occur for middle and high latitude dunes on Mars, although in many cases the "snow" would consist mostly of carbon-dioxide frost, with minimal water ice. What would happen to carbon-dioxide frost incorporated into a martian sand dune? On surfaces that receive early and direct sunlight, the sand would heat and the carbon-dioxide frost would sublime over a period of time, undermining the slope and promoting normal sand sliding. On slopes that were initially shaded and later exposed to direct sunlight, heating would be delayed and the carbon dioxide frost would sublime rapidly. This rapid formation of carbon-dioxide gas may act to fluidize overlying sand, causing it to flow rather than avalanche, and thus create a gully. The Mars Orbiter Camera was built and is operated by Malin Space Science Systems, San Diego, Calif. Mars Global Surveyor left Earth on Nov. 7, 1996, and began orbiting Mars on Sept. 12, 1997. JPL, a division of the California Institute of Technology, Pasadena, manages Mars Global Surveyor for NASA's Science Mission Directorate, Washington. Credit: NASA/JPL/MSSS/ASU
Acheron Fossae in Visible Li …
title Acheron Fossae in Visible Light
Description This visible-light image, taken by the thermal emission imaging system's camera on NASA's 2001 Mars Odyssey spacecraft, shows the highly fractured, faulted and deformed Acheron Fossae region of Mars. The scarps visible in this image are approximately one kilometer (3,300 feet) high, based on topography derived from the laser altimeter instrument on Mars Global Surveyor. Dark streaks only 50 meters (164 feet) across can be seen on some of the cliff faces. These streaks may be formed when the pervasive dust mantle covering this region gives way on steep slopes to create dust avalanches. The image also shows impact craters as small as 500 meters (1,640 feet) in diameter, as well as smooth and textured plains. Acheron Fossae is located 1,050 kilometers (650 miles) north of the large shield volcano Olympus Mons. This image covers an area about 18 by 9 kilometers (11 by 6 miles) centered at 37 degrees north, 131 degrees west. North is to the top of this image, which was acquired on February 19, 2002, at about 3:15 p.m. local Martian time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The thermal emission imaging system was provided by Arizona State University, Tempe. Lockheed Martin Astronautics, Denver, is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. Photo Credit: NASA/Jet Propulsion Laboratory/Arizona State University
Western Arcadia Planitia
title Western Arcadia Planitia
Description This is a Mars Odyssey visible color image of an unnamed crater in western Arcadia Planitia (near 39 degrees N, 179 degrees E). The crater shows a number of interesting internal and external features that suggest that it has undergone substantial modification since it formed. These features include concentric layers and radial streaks of brighter, redder materials inside the crater, and a heavily degraded rim and ejecta blanket. The patterns inside the crater suggest that material has flowed or slumped towards the center. Other craters with features like this have been seen at both northern and southern mid latitudes The distribution of these kinds of craters suggests the possible influence of surface or subsurface ice in the formation of these enigmatic features. The image was taken on September 29, 2002 during late northern spring. This is an approximate true color image, generated from a long strip of visible red (654 nm), green (540 nm), and blue (425 nm) filter images that were calibrated using a combination of pre-flight measurements and Hubble images of Mars. The colors appear perhaps a bit darker than one might expect, this is most likely because the images were acquired in late afternoon (roughly 4:40 p.m. local solar time) and the low Sun angle results in an overall darker surface. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The thermal emission imaging system was provided by Arizona State University, Tempe. Lockheed Martin Astronautics, Denver, Colo., is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. Credit: NASA/JPL/Arizona State University/Cornell University
Mars Ice Age, Simulated
title Mars Ice Age, Simulated
Description Infrared imaging from NASA's Mars Odyssey spacecraft shows signs of layering exposed at the surface in a region of Mars called Terra Meridiani. The brightness levels show daytime surface temperatures, which range from about minus 20 degrees to zero degrees Celsius (minus 4 degrees to 32 degrees Fahrenheit). Many of the temperature variations are due to slope effects, with sun-facing slopes warmer than shaded slopes. However, several rock layers can be seen to have distinctly different temperatures, indicating that physical properties vary from layer to layer. These differences suggest that the environment on this part of Mars varied through time as these layers were formed. The image is a mosaic combining four exposures taken by the thermal emission imaging system aboard Odyssey during the first two months of the Odyssey mapping mission, which began in February 2002. The area shown is about 120 kilometers (75 miles) across, at approximately 358 degrees east (2 degrees west) longitude and 3 degrees north latitude. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The thermal emission imaging system was provided by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. Lockheed Martin Astronautics, Denver, is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and JPL. JPL is a division of the California Institute of Technology in Pasadena. Credit: NASA/JPL/Arizona State University
Mars Surface Layers in Infra …
title Mars Surface Layers in Infrared
Description Infrared imaging from NASA's Mars Odyssey spacecraft shows signs of layering exposed at the surface in a region of Mars called Terra Meridiani. The brightness levels show daytime surface temperatures, which range from about minus 20 degrees to zero degrees Celsius (minus 4 degrees to 32 degrees Fahrenheit). Many of the temperature variations are due to slope effects, with sun-facing slopes warmer than shaded slopes. However, several rock layers can be seen to have distinctly different temperatures, indicating that physical properties vary from layer to layer. These differences suggest that the environment on this part of Mars varied through time as these layers were formed. The image is a mosaic combining four exposures taken by the thermal emission imaging system aboard Odyssey during the first two months of the Odyssey mapping mission, which began in February 2002. The area shown is about 120 kilometers (75 miles) across, at approximately 358 degrees east (2 degrees west) longitude and 3 degrees north latitude. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The thermal emission imaging system was provided by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. Lockheed Martin Astronautics, Denver, is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and JPL. JPL is a division of the California Institute of Technology in Pasadena. Credit: NASA/JPL/Arizona State University
Odyssey/ Becquerel
title Odyssey/ Becquerel
Description These images from Mars Odyssey look at the Becquerel crater in different lights -- visible, daytime infrared and nighttime infrared. The daytime images (left and center) were acquired on March 28, 2002 and the nighttime image (right) was acquired on March 2, 2002, by the thermal emission imaging system aboard Mars Odyssey. Thermal infrared is the wavelength range associated with heat. Looking at the Martian surface in the infrared wavelengths allows scientists to identify and distinguish bedrock from sand or dust covered areas. The Becquerel deposit is relatively bright in the visible wavelengths. Its surface has been scoured by windblown sand to produce the ridged topography seen in the visible image, which spans an 18-kilometer (11 mile)-wide portion of the deposit. Dark sand is seen in the lower right of the visible image. This same scene in the 32-kilometer (20 mile)-wide daytime infrared image looks remarkably similar to a photographic negative of the visible image due to the effects of solar heating. Darker tones represent cooler surfaces, brighter tones are warmer ones. During the day, visibly dark surfaces heat up much more efficiently than bright surfaces. The relatively bright sediments of the mound reflect more solar energy than the darker sand, allowing the mound to stay cooler than the sand. In the nighttime infrared image, the mound and the sand are warmer than their surroundings. The dark portions of the image represent cold surfaces that are covered in dust particles. Dust does not retain heat during the cold Martian night and quickly gives up any heat received during the day. Sand particles, because they are larger than dust particles, are able to retain heat better, producing the brighter swath around the mound. The infrared image has a resolution of 100 meters (328 feet) per pixel and is 32 kilometers (20 miles) wide. The visible image has a resolution of 18 meters per pixel and is approximately 18 kilometers (11 miles) wide. The images are centered at 21.4 degrees north latitude and 351.8 degrees east longitude. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. Credit: NASA/JPL/Arizona State University
Odyssey/Ganges
title Odyssey/Ganges
Description These Mars Odyssey images show layered deposits located on the floor of Ganges Chasma, part of the Valles Marineris canyon system, in both infrared (left) and visible (right) wavelengths. The images were acquired simultaneously by the thermal emission imaging system on March 17, 2002. The box shows where the visible image is located wthin the infrared image. The infrared image displays variations in surface temperature where bright tones indicate warmer surfaces and dark tones are cooler ones. Dramatic layering can be seen throughout the central deposit in both the infrared and visible images. Different styles of erosion are shown in these different layers, suggesting that Mars was subject to changing environments during its history. The infrared image has a resolution of 100 meters (328 feet) per pixel and is 32 kilometers (20 miles) wide. The visible image has a resolution of 18 meters per pixel and is approximately 18 kilometers (11 miles) wide. Pixel brightness in the infrared image is controlled by the temperature of the surface, which is in turn depend on how much Sun the area gets. Hence, dark units will heat up during the day and appear bright in the infrared. Conversely, visibly bright areas will not heat up as much and will appear dark in the infrared image. The images are centered at 7.1 degrees south latitude and 310.4 degrees east longitude. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. Credit: NASA/JPL/Arizona State University
Comparison of Martian Radiat …
title Comparison of Martian Radiation Environment with International Space Station
Description This graphic shows the radiation dose equivalent as measured by Odyssey's Martian radiation environment experiment at Mars and by instruments aboard the International Space Station, for the 11-month period from April 2002 through February 2003. The accumulated total in Mars orbit is about two and a half times larger than that aboard the Space Station. Averaged over this time period, about 10 percent of the dose equivalent at Mars is due to solar particles, although a 30 percent contribution from solar particles was seen in July 2002, when the sun was particularly active. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The radiation experiment was provided by the Johnson Space Center, Houston, Tex. Lockheed Martin Astronautics, Denver, Colo., is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. Credit: NASA/JPL/JSC
Odyssey/White Rock
title Odyssey/White Rock
Description These Mars Odyssey images show the "White Rock" feature on Mars in both infrared (left) and visible (right) wavelengths. The images were acquired simultaneously on March 11, 2002. The box shows where the visible image is located in the infrared image. "White Rock" is the unofficial name for this unusual landform that was first observed during the Mariner 9 mission in the early 1970's. The variations in brightness in the infrared image are due to differences in surface temperature, where dark is cool and bright is warm. The dramatic differences between the infrared and visible views of White Rock are the result of solar heating. The relatively bright surfaces observed at visible wavelengths reflect more solar energy than the darker surfaces, allowing them to stay cooler and thus they appear dark in the infrared image. The new thermal emission imaging system data will help to address the long standing question of whether the White Rock deposit was produced in an ancient crater lake or by dry processes of volcanic or wind deposition. The infrared image has a resolution of 100 meters (328 feet) per pixel and is 32 kilometers (20 miles) wide. The visible image has a resolution of 18 meters per pixel and is approximately 18 kilometers (11 miles) wide. The images are centered at 8.2 degrees south latitude and 24.9 degrees east longitude. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. Credit: NASA/JPL/Arizona State University
Radiation environment at Mar …
title Radiation environment at Mars and Earth December 8, 2003
Description This graphic shows the radiation dose equivalent as measured by Odyssey's martian radiation environment experiment at Mars and by instruments aboard the Earth-orbiting International Space Station (ISS), for the 18-month period from April 2002 through October 2003. The accumulated total in Mars orbit is just over two times larger than that aboard the Space Station. The bars where the Mars instrument's measurements are well above the average (as shown by the orange line) are months when there was significant solar activity, which increases the dose equivalent. Dose equivalent is expressed in units of milliSieverts per day. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington. The radiation experiment was provided by the Johnson Space Center, Houston, Texas. Lockheed Martin Space Systems, Denver, Colo., is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. Credit: NASA/JPL/JSC ###
Perspective View, Mt. Etna, …
PIA03370
Sol (our sun)
ASTER, C-Band Interferometri …
Title Perspective View, Mt. Etna, Italy & the Aeolian Islands
Original Caption Released with Image Italy's Mount Etna and the Aeolian Islands are the focus of this perspective view made from an Advanced Spaceborne Thermal and Emission Radiometer (ASTER) image from NASA's Terra spacecraft overlaid on Shuttle Radar Topography Mission (SRTM) topography. The image is looking south with the islands of Lipari and Vulcano in the foreground and Etna with its dark lava flows on the skyline. Vulcano also hosts an active volcano, the cone of which is prominent. In late October 2002, Etna erupted again, sending lava flows down the north and south sides of the volcano. The north flows are near the center of this view, but the ASTER image is from before the eruption. In addition to the terrestrial applications of these data for understanding active volcanoes and hazards associated with them such as lava flows and explosive eruptions, geologists studying Mars find these data useful as an analog to martian landforms and geologic processes. In late September 2002, a field conference with the theme of Terrestrial Analogs to Mars focused on Mount Etna allowing Mars geologists to see in person the types of features they can only sample remotely. Elevation data used in this image was acquired by SRTM aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C. Size: Varies across scene Location: 38.25 degrees North latitude, 15 degrees East longitude Orientation: Looking south Image Data: ASTER bands 2, 3, 1 as red, green, blue, respectively. Original Data Resolution: SRTM 1 arc-second (30 meters or 98 feet) Date Acquired: February 2000 (SRTM), July 29, 2001 (ASTER)
Perspective View, Mt. Etna, …
PIA03371
Sol (our sun)
ASTER, C-Band Interferometri …
Title Perspective View, Mt. Etna, Italy
Original Caption Released with Image Italy's Mount Etna is the focus of this perspective view made from an Advanced Spaceborne Thermal and Emission Radiometer (ASTER) image from NASA's Terra spacecraft overlaid on Shuttle Radar Topography Mission (SRTM) topography. The image is looking south with dark lava flows from the 1600's (center) to 1981 (long flow at lower right) visible in the foreground and the summit of Etna above. The city of Catania is barely visible behind Etna on the bay at the upper left. In late October 2002, Etna erupted again, sending lava flows down the north and south sides of the volcano. The north flows are near the center of this view, but the ASTER image is from before the eruption. In addition to the terrestrial applications of these data for understanding active volcanoes and hazards associated with them such as lava flows and explosive eruptions, geologists studying Mars find these data useful as an analog to martian landforms and geologic processes. In late September 2002, a field conference with the theme of Terrestrial Analogs to Mars focused on Mount Etna, allowing Mars geologists to see in person the types of features they can only sample remotely. Elevation data used in this image was acquired by SRTM aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C. Size: Varies across scene Location: 38 degrees North latitude, 15.5 degrees East longitude Orientation: Looking south Image Data: ASTER bands 2, 3, 1 as red, green, blue, respectively. Original Data Resolution: SRTM 1 arc-second (30 meters or 98 feet) Date Acquired: February 2000 (SRTM), July 29, 2001 (ASTER)
Comparison of Martian Radiat …
PIA04258
Sol (our sun)
Mars Radiation Experiment
Title Comparison of Martian Radiation Environment with International Space Station
Original Caption Released with Image This graphic shows the radiation dose equivalent as measured by Odyssey's Martian radiation environment experiment at Mars and by instruments aboard the International Space Station, for the 11-month period from April 2002 through February 2003. The accumulated total in Mars orbit is about two and a half times larger than that aboard the Space Station. Averaged over this time period, about 10 percent of the dose equivalent at Mars is due to solar particles, although a 30 percent contribution from solar particles was seen in July 2002, when the sun was particularly active. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The radiation experiment was provided by the Johnson Space Center, Houston, Tex. Lockheed Martin Astronautics, Denver, Colo., is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Western Arcadia Planitia
PIA04263
Sol (our sun)
Thermal Emission Imaging Sys …
Title Western Arcadia Planitia
Original Caption Released with Image This is a Mars Odyssey visible color image of an unnamed crater in western Arcadia Planitia (near 39 degrees N, 179 degrees E). The crater shows a number of interesting internal and external features that suggest that it has undergone substantial modification since it formed. These features include concentric layers and radial streaks of brighter, redder materials inside the crater, and a heavily degraded rim and ejecta blanket. The patterns inside the crater suggest that material has flowed or slumped towards the center. Other craters with features like this have been seen at both northern and southern mid latitudes The distribution of these kinds of craters suggests the possible influence of surface or subsurface ice in the formation of these enigmatic features. The image was taken on September 29, 2002 during late northern spring. This is an approximate true color image, generated from a long strip of visible red (654 nm), green (540 nm), and blue (425 nm) filter images that were calibrated using a combination of pre-flight measurements and Hubble images of Mars. The colors appear perhaps a bit darker than one might expect, this is most likely because the images were acquired in late afternoon (roughly 4:40 p.m. local solar time) and the low Sun angle results in an overall darker surface. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The thermal emission imaging system was provided by Arizona State University, Tempe. Lockheed Martin Astronautics, Denver, Colo., is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Radiation Environment at Mar …
PIA04909
Sol (our sun)
Mars Radiation Experiment
Title Radiation Environment at Mars and Earth
Original Caption Released with Image December 8, 2003 This graphic shows the radiation dose equivalent as measured by Odyssey's martian radiation environment experiment at Mars and by instruments aboard the Earth-orbiting International Space Station (ISS), for the 18-month period from April 2002 through October 2003. The accumulated total in Mars orbit is just over two times larger than that aboard the Space Station. The bars where the Mars instrument's measurements are well above the average (as shown by the orange line) are months when there was significant solar activity, which increases the dose equivalent. Dose equivalent is expressed in units of milliSieverts per day. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington. The radiation experiment was provided by the Johnson Space Center, Houston, Texas. Lockheed Martin Space Systems, Denver, Colo., is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
South Polar Cap
PIA05606
Sol (our sun)
Thermal Emission Imaging Sys …
Title South Polar Cap
Original Caption Released with Image Released 8 March 2004 The Odyssey spacecraft has completed a full Mars year of observations of the red planet. For the next several weeks the Image of the Day will look back over this first mars year. It will focus on four themes: 1) the poles - with the seasonal changes seen in the retreat and expansion of the caps, 2) craters - with a variety of morphologies relating to impact materials and later alteration, both infilling and exhumation, 3) channels - the clues to liquid surface flow, and 4) volcanic flow features. While some images have helped answer questions about the history of Mars, many have raised new questions that are still being investigated as Odyssey continues collecting data as it orbits Mars. This image was collected March 5, 2002 during the southern summer season. Layering in the South polar cap interior is readily visible and may indicate yearly ice/dust deposition. Image information: VIS instrument. Latitude -86.6, Longitude 156.8 East (203.2 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
South Polar Cap
PIA05606
Sol (our sun)
Thermal Emission Imaging Sys …
Title South Polar Cap
Original Caption Released with Image Released 8 March 2004 The Odyssey spacecraft has completed a full Mars year of observations of the red planet. For the next several weeks the Image of the Day will look back over this first mars year. It will focus on four themes: 1) the poles - with the seasonal changes seen in the retreat and expansion of the caps, 2) craters - with a variety of morphologies relating to impact materials and later alteration, both infilling and exhumation, 3) channels - the clues to liquid surface flow, and 4) volcanic flow features. While some images have helped answer questions about the history of Mars, many have raised new questions that are still being investigated as Odyssey continues collecting data as it orbits Mars. This image was collected March 5, 2002 during the southern summer season. Layering in the South polar cap interior is readily visible and may indicate yearly ice/dust deposition. Image information: VIS instrument. Latitude -86.6, Longitude 156.8 East (203.2 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
New Gullies on Martian Sand …
PIA04290
Sol (our sun)
Mars Orbiter Camera
Title New Gullies on Martian Sand Dune
Original Caption Released with Image ), encompassing the dark-toned sand dune field on the floor of a crater located near 49.8 degrees south latitude, 325.4 degrees west longitude. In this image, north is approximately up and sunlight illuminates the scene from the upper left. Based on earlier observations of other dune fields with gullies, camera-team scientists suspect that these gullies form by a process other than water fluidization. An image of a dune in Russell Crater, taken by the Mars Orbiter Camera in March 2001, (figure 3) shows how the morphology of the dune's slip face changes with direction: Gullies form on pole-facing slopes (southwest in this case), while normal slip-face avalanche features ("avalanches" in the figure) are seen on the equator-facing slopes (northwest in this case). Most of the dunes that have gullies on them are located in the Hellespontus and Noachis regions, and are frost-covered during the winter. Based on experience in Antarctica and other cold regions on Earth, it is known that snow and ice can be incorporated into dunes during winter. An example is the layering of snow buried in a sand dune in Victoria Valley, Antarctica, seen in a photograph taken by Michael Malin during the austral summer of 1982-1983 (figure 4). Active sand dunes in cold regions such as Antarctica and northern Canada commonly incorporate wintertime snow as new sand avalanches down a slip face and covers the frozen material. A similar process might occur for middle and high latitude dunes on Mars, although in many cases the "snow" would consist mostly of carbon-dioxide frost, with minimal water ice. What would happen to carbon-dioxide frost incorporated into a martian sand dune? On surfaces that receive early and direct sunlight, the sand would heat and the carbon-dioxide frost would sublime over a period of time, undermining the slope and promoting normal sand sliding. On slopes that were initially shaded and later exposed to direct sunlight, heating would be delayed and the carbon dioxide frost would sublime rapidly. This rapid formation of carbon-dioxide gas may act to fluidize overlying sand, causing it to flow rather than avalanche, and thus create a gully. The Mars Orbiter Camera was built and is operated by Malin Space Science Systems, San Diego, Calif. Mars Global Surveyor left Earth on Nov. 7, 1996, and began orbiting Mars on Sept. 12, 1997. JPL, a division of the California Institute of Technology, Pasadena, manages Mars Global Surveyor for NASA's Science Mission Directorate, Washington., One of the many mysteries associated with martian geology is the origin of gullies found at latitudes poleward of 30 degrees latitude. Most of these gullies are found within craters or other depressions, and appear to be related to the bedrock. Several hypotheses have been proposed for their origin, including groundwater seepage and melting at the base of a dust-mantled snow pack. Some middle-latitude gullies are found on sand dunes. These gullies appear to be different from those found on the slopes of craters, but generally have been interpreted to form by similar processes. In the present martian environment, it is difficult to introduce water to the surface. The temperature and atmospheric pressure may permit water to exist, but the rate of heating of the ground and atmosphere, and the amount of energy available to warm the ground or melt snow, are not conducive to such processes. An alternative process of gully formation on these sand dunes involves frozen carbon dioxide trapped in the winter by windblown sand, then subliming rapidly enough for the escaping carbon-dioxide gas to make the sand flow as a gully-cutting fluid. As part of extended-mission science investigation using the Mars Orbiter Camera on NASA's Mars Global Surveyor spacecraft, the camera team is re-imaging many locations where previous observations revealed gullies. The intent is to see if gully-forming processes are operating on Mars at the present time. The team has found one location where a new gully formed on a dune in an unnamed crater in the Hellespontus region of Mars, west of the Hellas Basin. This pair of narrow-angle images (figure 1) from the Mars Orbiter Camera shows the dune as it appeared on July 17, 2002, (left) and as it appeared on April 27, 2005, (right). The nearly three Earth years of intervening time amount to about 1.4 Mars years. During this period, a couple of gullies formed on the dune slip face. It is critical to recognize that the 2002 image was obtained at a time of year when the incident sunlight was coming in from a lower angle, relative to the horizon, than in the 2005 image. If the gullies had been present in 2002, their appearance would be sharper and more pronounced than they are in the 2005 image. The gullies simply did not exist on July 17, 2002. The steep walls of the gully alcove and channels suggests that the sand in this dune is somewhat cohesive, an observation common among martian sand dunes seen by the Mars Orbiter Camera over the past eight years. Wider context for the dune is shown in a mosaic of two images from the Thermal Emission Imaging System on NASA's Mars Odyssey orbiter (figure 2
New Gullies on Martian Sand …
PIA04290
Sol (our sun)
Mars Orbiter Camera
Title New Gullies on Martian Sand Dune
Original Caption Released with Image ), encompassing the dark-toned sand dune field on the floor of a crater located near 49.8 degrees south latitude, 325.4 degrees west longitude. In this image, north is approximately up and sunlight illuminates the scene from the upper left. Based on earlier observations of other dune fields with gullies, camera-team scientists suspect that these gullies form by a process other than water fluidization. An image of a dune in Russell Crater, taken by the Mars Orbiter Camera in March 2001, (figure 3) shows how the morphology of the dune's slip face changes with direction: Gullies form on pole-facing slopes (southwest in this case), while normal slip-face avalanche features ("avalanches" in the figure) are seen on the equator-facing slopes (northwest in this case). Most of the dunes that have gullies on them are located in the Hellespontus and Noachis regions, and are frost-covered during the winter. Based on experience in Antarctica and other cold regions on Earth, it is known that snow and ice can be incorporated into dunes during winter. An example is the layering of snow buried in a sand dune in Victoria Valley, Antarctica, seen in a photograph taken by Michael Malin during the austral summer of 1982-1983 (figure 4). Active sand dunes in cold regions such as Antarctica and northern Canada commonly incorporate wintertime snow as new sand avalanches down a slip face and covers the frozen material. A similar process might occur for middle and high latitude dunes on Mars, although in many cases the "snow" would consist mostly of carbon-dioxide frost, with minimal water ice. What would happen to carbon-dioxide frost incorporated into a martian sand dune? On surfaces that receive early and direct sunlight, the sand would heat and the carbon-dioxide frost would sublime over a period of time, undermining the slope and promoting normal sand sliding. On slopes that were initially shaded and later exposed to direct sunlight, heating would be delayed and the carbon dioxide frost would sublime rapidly. This rapid formation of carbon-dioxide gas may act to fluidize overlying sand, causing it to flow rather than avalanche, and thus create a gully. The Mars Orbiter Camera was built and is operated by Malin Space Science Systems, San Diego, Calif. Mars Global Surveyor left Earth on Nov. 7, 1996, and began orbiting Mars on Sept. 12, 1997. JPL, a division of the California Institute of Technology, Pasadena, manages Mars Global Surveyor for NASA's Science Mission Directorate, Washington., One of the many mysteries associated with martian geology is the origin of gullies found at latitudes poleward of 30 degrees latitude. Most of these gullies are found within craters or other depressions, and appear to be related to the bedrock. Several hypotheses have been proposed for their origin, including groundwater seepage and melting at the base of a dust-mantled snow pack. Some middle-latitude gullies are found on sand dunes. These gullies appear to be different from those found on the slopes of craters, but generally have been interpreted to form by similar processes. In the present martian environment, it is difficult to introduce water to the surface. The temperature and atmospheric pressure may permit water to exist, but the rate of heating of the ground and atmosphere, and the amount of energy available to warm the ground or melt snow, are not conducive to such processes. An alternative process of gully formation on these sand dunes involves frozen carbon dioxide trapped in the winter by windblown sand, then subliming rapidly enough for the escaping carbon-dioxide gas to make the sand flow as a gully-cutting fluid. As part of extended-mission science investigation using the Mars Orbiter Camera on NASA's Mars Global Surveyor spacecraft, the camera team is re-imaging many locations where previous observations revealed gullies. The intent is to see if gully-forming processes are operating on Mars at the present time. The team has found one location where a new gully formed on a dune in an unnamed crater in the Hellespontus region of Mars, west of the Hellas Basin. This pair of narrow-angle images (figure 1) from the Mars Orbiter Camera shows the dune as it appeared on July 17, 2002, (left) and as it appeared on April 27, 2005, (right). The nearly three Earth years of intervening time amount to about 1.4 Mars years. During this period, a couple of gullies formed on the dune slip face. It is critical to recognize that the 2002 image was obtained at a time of year when the incident sunlight was coming in from a lower angle, relative to the horizon, than in the 2005 image. If the gullies had been present in 2002, their appearance would be sharper and more pronounced than they are in the 2005 image. The gullies simply did not exist on July 17, 2002. The steep walls of the gully alcove and channels suggests that the sand in this dune is somewhat cohesive, an observation common among martian sand dunes seen by the Mars Orbiter Camera over the past eight years. Wider context for the dune is shown in a mosaic of two images from the Thermal Emission Imaging System on NASA's Mars Odyssey orbiter (figure 2
New Gullies on Martian Sand …
PIA04290
Sol (our sun)
Mars Orbiter Camera
Title New Gullies on Martian Sand Dune
Original Caption Released with Image ), encompassing the dark-toned sand dune field on the floor of a crater located near 49.8 degrees south latitude, 325.4 degrees west longitude. In this image, north is approximately up and sunlight illuminates the scene from the upper left. Based on earlier observations of other dune fields with gullies, camera-team scientists suspect that these gullies form by a process other than water fluidization. An image of a dune in Russell Crater, taken by the Mars Orbiter Camera in March 2001, (figure 3) shows how the morphology of the dune's slip face changes with direction: Gullies form on pole-facing slopes (southwest in this case), while normal slip-face avalanche features ("avalanches" in the figure) are seen on the equator-facing slopes (northwest in this case). Most of the dunes that have gullies on them are located in the Hellespontus and Noachis regions, and are frost-covered during the winter. Based on experience in Antarctica and other cold regions on Earth, it is known that snow and ice can be incorporated into dunes during winter. An example is the layering of snow buried in a sand dune in Victoria Valley, Antarctica, seen in a photograph taken by Michael Malin during the austral summer of 1982-1983 (figure 4). Active sand dunes in cold regions such as Antarctica and northern Canada commonly incorporate wintertime snow as new sand avalanches down a slip face and covers the frozen material. A similar process might occur for middle and high latitude dunes on Mars, although in many cases the "snow" would consist mostly of carbon-dioxide frost, with minimal water ice. What would happen to carbon-dioxide frost incorporated into a martian sand dune? On surfaces that receive early and direct sunlight, the sand would heat and the carbon-dioxide frost would sublime over a period of time, undermining the slope and promoting normal sand sliding. On slopes that were initially shaded and later exposed to direct sunlight, heating would be delayed and the carbon dioxide frost would sublime rapidly. This rapid formation of carbon-dioxide gas may act to fluidize overlying sand, causing it to flow rather than avalanche, and thus create a gully. The Mars Orbiter Camera was built and is operated by Malin Space Science Systems, San Diego, Calif. Mars Global Surveyor left Earth on Nov. 7, 1996, and began orbiting Mars on Sept. 12, 1997. JPL, a division of the California Institute of Technology, Pasadena, manages Mars Global Surveyor for NASA's Science Mission Directorate, Washington., One of the many mysteries associated with martian geology is the origin of gullies found at latitudes poleward of 30 degrees latitude. Most of these gullies are found within craters or other depressions, and appear to be related to the bedrock. Several hypotheses have been proposed for their origin, including groundwater seepage and melting at the base of a dust-mantled snow pack. Some middle-latitude gullies are found on sand dunes. These gullies appear to be different from those found on the slopes of craters, but generally have been interpreted to form by similar processes. In the present martian environment, it is difficult to introduce water to the surface. The temperature and atmospheric pressure may permit water to exist, but the rate of heating of the ground and atmosphere, and the amount of energy available to warm the ground or melt snow, are not conducive to such processes. An alternative process of gully formation on these sand dunes involves frozen carbon dioxide trapped in the winter by windblown sand, then subliming rapidly enough for the escaping carbon-dioxide gas to make the sand flow as a gully-cutting fluid. As part of extended-mission science investigation using the Mars Orbiter Camera on NASA's Mars Global Surveyor spacecraft, the camera team is re-imaging many locations where previous observations revealed gullies. The intent is to see if gully-forming processes are operating on Mars at the present time. The team has found one location where a new gully formed on a dune in an unnamed crater in the Hellespontus region of Mars, west of the Hellas Basin. This pair of narrow-angle images (figure 1) from the Mars Orbiter Camera shows the dune as it appeared on July 17, 2002, (left) and as it appeared on April 27, 2005, (right). The nearly three Earth years of intervening time amount to about 1.4 Mars years. During this period, a couple of gullies formed on the dune slip face. It is critical to recognize that the 2002 image was obtained at a time of year when the incident sunlight was coming in from a lower angle, relative to the horizon, than in the 2005 image. If the gullies had been present in 2002, their appearance would be sharper and more pronounced than they are in the 2005 image. The gullies simply did not exist on July 17, 2002. The steep walls of the gully alcove and channels suggests that the sand in this dune is somewhat cohesive, an observation common among martian sand dunes seen by the Mars Orbiter Camera over the past eight years. Wider context for the dune is shown in a mosaic of two images from the Thermal Emission Imaging System on NASA's Mars Odyssey orbiter (figure 2
New Gullies on Martian Sand …
PIA04290
Sol (our sun)
Mars Orbiter Camera
Title New Gullies on Martian Sand Dune
Original Caption Released with Image ), encompassing the dark-toned sand dune field on the floor of a crater located near 49.8 degrees south latitude, 325.4 degrees west longitude. In this image, north is approximately up and sunlight illuminates the scene from the upper left. Based on earlier observations of other dune fields with gullies, camera-team scientists suspect that these gullies form by a process other than water fluidization. An image of a dune in Russell Crater, taken by the Mars Orbiter Camera in March 2001, (figure 3) shows how the morphology of the dune's slip face changes with direction: Gullies form on pole-facing slopes (southwest in this case), while normal slip-face avalanche features ("avalanches" in the figure) are seen on the equator-facing slopes (northwest in this case). Most of the dunes that have gullies on them are located in the Hellespontus and Noachis regions, and are frost-covered during the winter. Based on experience in Antarctica and other cold regions on Earth, it is known that snow and ice can be incorporated into dunes during winter. An example is the layering of snow buried in a sand dune in Victoria Valley, Antarctica, seen in a photograph taken by Michael Malin during the austral summer of 1982-1983 (figure 4). Active sand dunes in cold regions such as Antarctica and northern Canada commonly incorporate wintertime snow as new sand avalanches down a slip face and covers the frozen material. A similar process might occur for middle and high latitude dunes on Mars, although in many cases the "snow" would consist mostly of carbon-dioxide frost, with minimal water ice. What would happen to carbon-dioxide frost incorporated into a martian sand dune? On surfaces that receive early and direct sunlight, the sand would heat and the carbon-dioxide frost would sublime over a period of time, undermining the slope and promoting normal sand sliding. On slopes that were initially shaded and later exposed to direct sunlight, heating would be delayed and the carbon dioxide frost would sublime rapidly. This rapid formation of carbon-dioxide gas may act to fluidize overlying sand, causing it to flow rather than avalanche, and thus create a gully. The Mars Orbiter Camera was built and is operated by Malin Space Science Systems, San Diego, Calif. Mars Global Surveyor left Earth on Nov. 7, 1996, and began orbiting Mars on Sept. 12, 1997. JPL, a division of the California Institute of Technology, Pasadena, manages Mars Global Surveyor for NASA's Science Mission Directorate, Washington., One of the many mysteries associated with martian geology is the origin of gullies found at latitudes poleward of 30 degrees latitude. Most of these gullies are found within craters or other depressions, and appear to be related to the bedrock. Several hypotheses have been proposed for their origin, including groundwater seepage and melting at the base of a dust-mantled snow pack. Some middle-latitude gullies are found on sand dunes. These gullies appear to be different from those found on the slopes of craters, but generally have been interpreted to form by similar processes. In the present martian environment, it is difficult to introduce water to the surface. The temperature and atmospheric pressure may permit water to exist, but the rate of heating of the ground and atmosphere, and the amount of energy available to warm the ground or melt snow, are not conducive to such processes. An alternative process of gully formation on these sand dunes involves frozen carbon dioxide trapped in the winter by windblown sand, then subliming rapidly enough for the escaping carbon-dioxide gas to make the sand flow as a gully-cutting fluid. As part of extended-mission science investigation using the Mars Orbiter Camera on NASA's Mars Global Surveyor spacecraft, the camera team is re-imaging many locations where previous observations revealed gullies. The intent is to see if gully-forming processes are operating on Mars at the present time. The team has found one location where a new gully formed on a dune in an unnamed crater in the Hellespontus region of Mars, west of the Hellas Basin. This pair of narrow-angle images (figure 1) from the Mars Orbiter Camera shows the dune as it appeared on July 17, 2002, (left) and as it appeared on April 27, 2005, (right). The nearly three Earth years of intervening time amount to about 1.4 Mars years. During this period, a couple of gullies formed on the dune slip face. It is critical to recognize that the 2002 image was obtained at a time of year when the incident sunlight was coming in from a lower angle, relative to the horizon, than in the 2005 image. If the gullies had been present in 2002, their appearance would be sharper and more pronounced than they are in the 2005 image. The gullies simply did not exist on July 17, 2002. The steep walls of the gully alcove and channels suggests that the sand in this dune is somewhat cohesive, an observation common among martian sand dunes seen by the Mars Orbiter Camera over the past eight years. Wider context for the dune is shown in a mosaic of two images from the Thermal Emission Imaging System on NASA's Mars Odyssey orbiter (figure 2
New Gullies on Martian Sand …
PIA04290
Sol (our sun)
Mars Orbiter Camera
Title New Gullies on Martian Sand Dune
Original Caption Released with Image ), encompassing the dark-toned sand dune field on the floor of a crater located near 49.8 degrees south latitude, 325.4 degrees west longitude. In this image, north is approximately up and sunlight illuminates the scene from the upper left. Based on earlier observations of other dune fields with gullies, camera-team scientists suspect that these gullies form by a process other than water fluidization. An image of a dune in Russell Crater, taken by the Mars Orbiter Camera in March 2001, (figure 3) shows how the morphology of the dune's slip face changes with direction: Gullies form on pole-facing slopes (southwest in this case), while normal slip-face avalanche features ("avalanches" in the figure) are seen on the equator-facing slopes (northwest in this case). Most of the dunes that have gullies on them are located in the Hellespontus and Noachis regions, and are frost-covered during the winter. Based on experience in Antarctica and other cold regions on Earth, it is known that snow and ice can be incorporated into dunes during winter. An example is the layering of snow buried in a sand dune in Victoria Valley, Antarctica, seen in a photograph taken by Michael Malin during the austral summer of 1982-1983 (figure 4). Active sand dunes in cold regions such as Antarctica and northern Canada commonly incorporate wintertime snow as new sand avalanches down a slip face and covers the frozen material. A similar process might occur for middle and high latitude dunes on Mars, although in many cases the "snow" would consist mostly of carbon-dioxide frost, with minimal water ice. What would happen to carbon-dioxide frost incorporated into a martian sand dune? On surfaces that receive early and direct sunlight, the sand would heat and the carbon-dioxide frost would sublime over a period of time, undermining the slope and promoting normal sand sliding. On slopes that were initially shaded and later exposed to direct sunlight, heating would be delayed and the carbon dioxide frost would sublime rapidly. This rapid formation of carbon-dioxide gas may act to fluidize overlying sand, causing it to flow rather than avalanche, and thus create a gully. The Mars Orbiter Camera was built and is operated by Malin Space Science Systems, San Diego, Calif. Mars Global Surveyor left Earth on Nov. 7, 1996, and began orbiting Mars on Sept. 12, 1997. JPL, a division of the California Institute of Technology, Pasadena, manages Mars Global Surveyor for NASA's Science Mission Directorate, Washington., One of the many mysteries associated with martian geology is the origin of gullies found at latitudes poleward of 30 degrees latitude. Most of these gullies are found within craters or other depressions, and appear to be related to the bedrock. Several hypotheses have been proposed for their origin, including groundwater seepage and melting at the base of a dust-mantled snow pack. Some middle-latitude gullies are found on sand dunes. These gullies appear to be different from those found on the slopes of craters, but generally have been interpreted to form by similar processes. In the present martian environment, it is difficult to introduce water to the surface. The temperature and atmospheric pressure may permit water to exist, but the rate of heating of the ground and atmosphere, and the amount of energy available to warm the ground or melt snow, are not conducive to such processes. An alternative process of gully formation on these sand dunes involves frozen carbon dioxide trapped in the winter by windblown sand, then subliming rapidly enough for the escaping carbon-dioxide gas to make the sand flow as a gully-cutting fluid. As part of extended-mission science investigation using the Mars Orbiter Camera on NASA's Mars Global Surveyor spacecraft, the camera team is re-imaging many locations where previous observations revealed gullies. The intent is to see if gully-forming processes are operating on Mars at the present time. The team has found one location where a new gully formed on a dune in an unnamed crater in the Hellespontus region of Mars, west of the Hellas Basin. This pair of narrow-angle images (figure 1) from the Mars Orbiter Camera shows the dune as it appeared on July 17, 2002, (left) and as it appeared on April 27, 2005, (right). The nearly three Earth years of intervening time amount to about 1.4 Mars years. During this period, a couple of gullies formed on the dune slip face. It is critical to recognize that the 2002 image was obtained at a time of year when the incident sunlight was coming in from a lower angle, relative to the horizon, than in the 2005 image. If the gullies had been present in 2002, their appearance would be sharper and more pronounced than they are in the 2005 image. The gullies simply did not exist on July 17, 2002. The steep walls of the gully alcove and channels suggests that the sand in this dune is somewhat cohesive, an observation common among martian sand dunes seen by the Mars Orbiter Camera over the past eight years. Wider context for the dune is shown in a mosaic of two images from the Thermal Emission Imaging System on NASA's Mars Odyssey orbiter (figure 2
Streamlined Islands in Ares …
PIA03825
Sol (our sun)
Thermal Emission Imaging Sys …
Title Streamlined Islands in Ares Valles
Original Caption Released with Image (Released 10 June 2002) The Science Although liquid water is not stable on the surface of Mars today, there is substantial geologic evidence that large quantities of water once flowed across the surface in the distant past. Streamlined islands, shown here, are one piece of evidence for this ancient water. The tremendous force of moving water, possibly from a catastrophic flood, carved these teardrop-shaped islands within a much larger channel called Ares Valles. The orientation of the islands can be used as an indicator of the direction the water flowed. The islands have a blunt end that is usually associated with an obstacle, commonly an impact crater. The crater is resistant to erosion and creates a geologic barrier around which the water must flow. As the water flows past the obstacle, its erosive power is directed outward, leaving the area in the lee of the obstacle relatively uneroded. However, some scientists have also argued that the area in the lee of the obstacle might be a depositional zone, where material is dropped out of the water as it briefly slows. The ridges observed on the high-standing terrain in the leeward parts of the islands may be benches carved into the rock that mark the height of the water at various times during the flood, or they might be indicative of layering in the leeward rock. As the water makes its way downstream, the interference of the water flow by the obstacle is reduced, and the water that was diverted around the obstacle rejoins itself at the narrow end of the island. Therefore, the direction of the water flow is parallel to the orientation of the island, and the narrow end of the island points downstream. In addition to the streamlined islands, the channel floor exhibits fluting that is also suggestive of flowing water. The flutes (also known as longitudinal grooves) are also parallel to the direction of flow, indicating that the water flow was turbulent and probably quite fast, which is consistent with the hypothesized catastrophic floods that came through Ares Valles. The Story In symbolism only, these guppy-shaped islands and current-like flutes of land beside them may conjure up a mental image of a flowing Martian river. This picture would only be half-right. Scientifically, no fish ever swam this channel, but these landforms do reveal that catastrophic floods of rushing water probably patterned the land in just this way. Geologists who study flood areas believe that a tremendous force of moving water probably carved both the islands and the small, parallel, "current-like" ridges around them. The blunt end of the islands (the "heads" of the "fish") are probably ancient impact craters that posed obstacles to the water as it rushed down the channel in torrents. Because a crater is resistant to erosion, it creates a geologic barrier around which the water must flow. As the water makes its way downstream, the crater's interference with the water flow is reduced, so the water that was diverted around, the obstacle rejoins at the narrow end of the island (the "tail" of the "fish"). Therefore, from this information, you can tell that the water flowed from the southeast to the northwest. As a rule of thumb for the future, you can say that the narrow end of the island points downstream. The result may be the island behind the crater, but geologists disagree about the exact process by which the island forms. Some scientists argue that the erosive power of the water is directed outward, leaving the area behind, or in the lee of, the obstacle relatively untouched. Other scientists argue that the water slows when it encounters the crater obstacle, and small particles of sand and "dirt" drop out of the water and are deposited in the lee. There's another small associated uncertainty too. Look closely at the edges of the islands and notice how the land is terraced. These ledges might mark the height of the water at various times during the flood . . . or they might be an indication that layering occurred. It all depends on your hypothesis. Like the streamlined islands, the current-like flutes are parallel to the direction of flow, indicating that the water flow was turbulent and probably quite fast, which is consistent with the hypothesis that catastrophic floods broke forth in this region, known as Ares Vallis. Ares Vallis is the region where Pathfinder landed to help understand the possible history of water on Mars. Geologists want to understand not only if there was a catastrophic flood, but why it happened. Both orbiters and landers can add to the information on hand, but some Earth examples might provide clues as well. On our planet, some glacial valleys have had major catastrophic floods that were caused by the sudden outburst and drainage of glacial lakes. The Channeled Scabland in Washington state is great Earthly example of a place where the sudden failure of a glacier ice dam spewed out water, leaving a system of large, dry channels with flutes similar to the ones seen in this image. Did something similar happen to cause this outburst on Mars? Hopefully, future studies of THEMIS and other images will help us understand the answer.
Streamlined Islands in Ares …
PIA03825
Sol (our sun)
Thermal Emission Imaging Sys …
Title Streamlined Islands in Ares Valles
Original Caption Released with Image (Released 10 June 2002) The Science Although liquid water is not stable on the surface of Mars today, there is substantial geologic evidence that large quantities of water once flowed across the surface in the distant past. Streamlined islands, shown here, are one piece of evidence for this ancient water. The tremendous force of moving water, possibly from a catastrophic flood, carved these teardrop-shaped islands within a much larger channel called Ares Valles. The orientation of the islands can be used as an indicator of the direction the water flowed. The islands have a blunt end that is usually associated with an obstacle, commonly an impact crater. The crater is resistant to erosion and creates a geologic barrier around which the water must flow. As the water flows past the obstacle, its erosive power is directed outward, leaving the area in the lee of the obstacle relatively uneroded. However, some scientists have also argued that the area in the lee of the obstacle might be a depositional zone, where material is dropped out of the water as it briefly slows. The ridges observed on the high-standing terrain in the leeward parts of the islands may be benches carved into the rock that mark the height of the water at various times during the flood, or they might be indicative of layering in the leeward rock. As the water makes its way downstream, the interference of the water flow by the obstacle is reduced, and the water that was diverted around the obstacle rejoins itself at the narrow end of the island. Therefore, the direction of the water flow is parallel to the orientation of the island, and the narrow end of the island points downstream. In addition to the streamlined islands, the channel floor exhibits fluting that is also suggestive of flowing water. The flutes (also known as longitudinal grooves) are also parallel to the direction of flow, indicating that the water flow was turbulent and probably quite fast, which is consistent with the hypothesized catastrophic floods that came through Ares Valles. The Story In symbolism only, these guppy-shaped islands and current-like flutes of land beside them may conjure up a mental image of a flowing Martian river. This picture would only be half-right. Scientifically, no fish ever swam this channel, but these landforms do reveal that catastrophic floods of rushing water probably patterned the land in just this way. Geologists who study flood areas believe that a tremendous force of moving water probably carved both the islands and the small, parallel, "current-like" ridges around them. The blunt end of the islands (the "heads" of the "fish") are probably ancient impact craters that posed obstacles to the water as it rushed down the channel in torrents. Because a crater is resistant to erosion, it creates a geologic barrier around which the water must flow. As the water makes its way downstream, the crater's interference with the water flow is reduced, so the water that was diverted around, the obstacle rejoins at the narrow end of the island (the "tail" of the "fish"). Therefore, from this information, you can tell that the water flowed from the southeast to the northwest. As a rule of thumb for the future, you can say that the narrow end of the island points downstream. The result may be the island behind the crater, but geologists disagree about the exact process by which the island forms. Some scientists argue that the erosive power of the water is directed outward, leaving the area behind, or in the lee of, the obstacle relatively untouched. Other scientists argue that the water slows when it encounters the crater obstacle, and small particles of sand and "dirt" drop out of the water and are deposited in the lee. There's another small associated uncertainty too. Look closely at the edges of the islands and notice how the land is terraced. These ledges might mark the height of the water at various times during the flood . . . or they might be an indication that layering occurred. It all depends on your hypothesis. Like the streamlined islands, the current-like flutes are parallel to the direction of flow, indicating that the water flow was turbulent and probably quite fast, which is consistent with the hypothesis that catastrophic floods broke forth in this region, known as Ares Vallis. Ares Vallis is the region where Pathfinder landed to help understand the possible history of water on Mars. Geologists want to understand not only if there was a catastrophic flood, but why it happened. Both orbiters and landers can add to the information on hand, but some Earth examples might provide clues as well. On our planet, some glacial valleys have had major catastrophic floods that were caused by the sudden outburst and drainage of glacial lakes. The Channeled Scabland in Washington state is great Earthly example of a place where the sudden failure of a glacier ice dam spewed out water, leaving a system of large, dry channels with flutes similar to the ones seen in this image. Did something similar happen to cause this outburst on Mars? Hopefully, future studies of THEMIS and other images will help us understand the answer.
Coprates Chasma
PIA03809
Sol (our sun)
Thermal Emission Imaging Sys …
Title Coprates Chasma
Original Caption Released with Image (Released 21 May 2002) The Science This THEMIS visible image shows the northern interior wall of Coprates Chasma, one of the major canyons that form Valles Marineris. The cliff face seen in this image drops over 8 km from the plateau of Ophir Planum to the north (top) to the floor of Coprates. A complex set of ridges and chutes has been eroded into the layered rock that forms the canyon walls. Streamers of bright and dark material can be seen in many of the chutes, suggesting that loose material (sediment) is moving down the chutes toward the canyon floor. In many places this sediment has completely buried the wall. The uppermost layers near the rim of the canyon are brighter than the lower layers, suggesting that the upper layers are composed of different materials than occur further down the wall. Very few small impact craters can be seen in this image, indicating that the erosion and transport of material down the canyon wall and across the floor is occurring at a relatively rapid rate, so that any craters that form are rapidly buried or eroded. The Story From the smooth plateau of Ophir Planum (top of image), the dramatic canyon wall of Coprates Chasma falls in chutes and ridges for almost five miles to the dark floor of the canyon, where one lone, brooding impact crater can be seen. It is a rare sight in this part of the canyon, because all of the erosion on the cliff face happens so fast that most craters are rapidly buried or eroded. You can see how looser material is transported down the canyon by observing all of the bright and dark streaks streaming down the wall. A particularly good example of this continuing descent is in the left-most canyon shoot, where material has tumbled down into its center crevice, gathering in a pile about mid-way down (left-hand side of the image, right at the point where the bright material meets the dark). A canyon like this one is kind of like a slice through the geologic history of the planet. Each layer in the rock formed at different times, with different materials. You can tell that the bright material in this image is made of different rocks and minerals than the darker layers toward the bottom. If a lander or a rover ever went to study a Martian canyon up close, a good place to land would be at the bottom. That's because all of the rock and soil from the top layers are carried down to the bottom. Without needing to climb up the steep canyon wall for a closer look, scientific instruments on the lander or rover would be able to study all the different kinds of materials right there at the bottom and determine what kinds of rock and soil formed through the ages. Coprates Chasma is one of the major canyons that form Valles Marineris, the largest canyon system in the solar system. If Valles Marineris were on Earth, it would stretch all the way from California to Washington, D.C. Since it also slices a few miles down into the planet's interior, it's the perfect place to study the geological history of, Mars.
Coprates Chasma
PIA03809
Sol (our sun)
Thermal Emission Imaging Sys …
Title Coprates Chasma
Original Caption Released with Image (Released 21 May 2002) The Science This THEMIS visible image shows the northern interior wall of Coprates Chasma, one of the major canyons that form Valles Marineris. The cliff face seen in this image drops over 8 km from the plateau of Ophir Planum to the north (top) to the floor of Coprates. A complex set of ridges and chutes has been eroded into the layered rock that forms the canyon walls. Streamers of bright and dark material can be seen in many of the chutes, suggesting that loose material (sediment) is moving down the chutes toward the canyon floor. In many places this sediment has completely buried the wall. The uppermost layers near the rim of the canyon are brighter than the lower layers, suggesting that the upper layers are composed of different materials than occur further down the wall. Very few small impact craters can be seen in this image, indicating that the erosion and transport of material down the canyon wall and across the floor is occurring at a relatively rapid rate, so that any craters that form are rapidly buried or eroded. The Story From the smooth plateau of Ophir Planum (top of image), the dramatic canyon wall of Coprates Chasma falls in chutes and ridges for almost five miles to the dark floor of the canyon, where one lone, brooding impact crater can be seen. It is a rare sight in this part of the canyon, because all of the erosion on the cliff face happens so fast that most craters are rapidly buried or eroded. You can see how looser material is transported down the canyon by observing all of the bright and dark streaks streaming down the wall. A particularly good example of this continuing descent is in the left-most canyon shoot, where material has tumbled down into its center crevice, gathering in a pile about mid-way down (left-hand side of the image, right at the point where the bright material meets the dark). A canyon like this one is kind of like a slice through the geologic history of the planet. Each layer in the rock formed at different times, with different materials. You can tell that the bright material in this image is made of different rocks and minerals than the darker layers toward the bottom. If a lander or a rover ever went to study a Martian canyon up close, a good place to land would be at the bottom. That's because all of the rock and soil from the top layers are carried down to the bottom. Without needing to climb up the steep canyon wall for a closer look, scientific instruments on the lander or rover would be able to study all the different kinds of materials right there at the bottom and determine what kinds of rock and soil formed through the ages. Coprates Chasma is one of the major canyons that form Valles Marineris, the largest canyon system in the solar system. If Valles Marineris were on Earth, it would stretch all the way from California to Washington, D.C. Since it also slices a few miles down into the planet's interior, it's the perfect place to study the geological history of, Mars.
Mars Surface Layers in Infra …
PIA03806
Sol (our sun)
Thermal Emission Imaging Sys …
Title Mars Surface Layers in Infrared
Original Caption Released with Image Infrared imaging from NASA's Mars Odyssey spacecraft shows signs of layering exposed at the surface in a region of Mars called Terra Meridiani. The brightness levels show daytime surface temperatures, which range from about minus 20 degrees to zero degrees Celsius (minus 4 degrees to 32 degrees Fahrenheit). Many of the temperature variations are due to slope effects, with sun-facing slopes warmer than shaded slopes. However, several rock layers can be seen to have distinctly different temperatures, indicating that physical properties vary from layer to layer. These differences suggest that the environment on this part of Mars varied through time as these layers were formed. The image is a mosaic combining four exposures taken by the thermal emission imaging system aboard Odyssey during the first two months of the Odyssey mapping mission, which began in February 2002. The area shown is about 120 kilometers (75 miles) across, at approximately 358 degrees east (2 degrees west) longitude and 3 degrees north latitude. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The thermal emission imaging system was provided by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. Lockheed Martin Astronautics, Denver, is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and JPL. JPL is a division of the California Institute of Technology in Pasadena.
Depth-to-Ice Map of an Arcti …
PIA09335
Sol (our sun)
Thermal Emission Imaging Sys …
Title Depth-to-Ice Map of an Arctic Site on Mars
Original Caption Released with Image Color coding in this map of a far-northern site on Mars indicates the change in nighttime ground-surface temperature between summer and fall. This site, like most of high-latitude Mars, has water ice mixed with soil near the surface. The ice is probably in a rock-hard frozen layer beneath a few centimeters or inches of looser, dry soil. The amount of temperature change at the surface likely corresponds to how close to the surface the icy material lies. The dense, icy layer retains heat better than the looser soil above it, so where the icy layer is closer to the surface, the surface temperature changes more slowly than where the icy layer is buried deeper. On the map, areas of the surface that cooled more slowly between summer and autumn (interpreted as having the ice closer to the surface) are coded blue and green. Areas that cooled more quickly (interpreted as having more distance to the ice) are coded red and yellow. The depth to the top of the icy layer estimated from these observations, as little as 5 centimeters (2 inches), matches modeling of where it would be if Mars has an active cycle of water being exchanged by diffusion between atmospheric water vapor and subsurface water ice. This map and its interpretation are in a May 3, 2007, report in the journal "Nature", by Joshua Bandfield of Arizona State University, Tempe. The Thermal Emission Imaging System camera on NASA's Mars Odyssey orbiter collected the data presented in the map. The site is centered near 67.5 degrees north latitude, 132 degrees east longitude, in the Martian arctic plains called Vastitas Borealis. It was formerly a candidate landing site for NASA's Phoenix Mars Lander mission. This site is within the portion of the planet where, in 2002, the Gamma Ray Spectrometer suite of instruments on Mars Odyssey found evidence for water ice lying just below the surface. The information from the Gamma Ray Spectrometer is averaged over patches of ground hundreds of kilometers or miles wide. The information from the Thermal Emission Imaging System allows more than 100-fold higher resolution in mapping variations in the depth to ice. The Thermal Emission Imaging System observed the site in infrared wavelengths during night time, providing surface-temperature information, once on March 13, 2005, during summer in Mars' northern hemisphere, and again on April 8, 2005, during autumn there. The colors on this map signify relative differences in how much the surface temperature changed between those two observations. Blue indicates the locations with the least change. Red indicates areas with most change. Modeling provides estimates that the range of temperature changes shown in this map corresponds to a range in depth-to-ice of 5 centimeters (2 inches) to more than 18 centimeters (more than 7 inches). The sensitivity of this method for estimating the depth is not good for depths greater than about 20 centimeters (8 inches). The temperature-change data are overlaid on a mosaic of black-and-white, daytime images taken in visible-light wavelengths by the same camera, providing information about shapes in the landscape. The 10-kilometer scale bar is 6.2 miles long. NASA's Jet Propulsion Laboratory manages the Mars Odyssey mission for NASA's Science Mission Directorate, Washington, D.C. The Thermal Emission Imaging System was developed by Arizona State University in collaboration with Raytheon Santa Barbara Remote Sensing. Lockheed Martin Space Systems, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Eberswalde Delta in High Res …
PIA04293
Sol (our sun)
Mars Orbiter Camera
Title Eberswalde Delta in High Resolution
Original Caption Released with Image ). The first Mars Orbiter Camera narrow angle images of some of the landforms in the delta were acquired in 2000, during the Mars Global Surveyor primary mission, but those pictures did not show very well the unambiguous inverted channel forms. Not until the second Earth year of the orbiter's extended mission were the deltaic features recognized in Mars Orbiter Camera images obtained in March and June of 2002. Following the initial observations in 2002, the Mars Orbiter Camera team began a systematic effort to map the entire Eberswalde Crater delta. Most of this imaging required slewing the whole spacecraft in a technique called "roll only targeted observation" so that it pointed the camera toward the feature. In this way, the camera team was able to build up a mosaic of the delta much more quickly than would have been the case if the team had simply relied upon chance crossing of the delta by the orbiter's usual ground track. This technique was not employed during Mars Global Surveyor's primary mission, except in the search for Mars Polar Lander, but became a routine part of the tool kit during the extended mission. Even with the "roll only targeted observation" technique, it took more than one Earth year to build up a complete mosaic of images of the delta. In the meantime, the first data showing the deltaic landforms were archived and released to the public and scientific community, long before the Mars Orbiter Camera team's analysis and mosaic were complete. Some scientists began independent analyses of the landform at that time. The initial analysis and announcement of the feature was finally published in November 2003. The Eberswalde delta provides the first clear, "smoking gun" evidence that some valleys on Mars experienced persistent flow of a liquid with the physical properties of water over an extended period of time, as do rivers on Earth. In addition, because the delta today is lithified -- that is, hardened to form rock -- it provided the first unambiguous evidence that some martian sedimentary rocks were deposited in a liquid (presumably, water) environment. The presence of meandering channels, a cut-off meander, and crisscrossing channels at different elevations (one above the other), provided the clear geologic evidence for these interpretations. After the sediments were deposited to form the delta, the material was further buried by other materials -- probably sediments -- that are no longer present. The entire package of buried material became cemented and hardened to form rock. Later, erosive processes such as wind stripped away the overlying rock, re-exposing the delta. Now preserved essentially as a fossil, the former floors of channels in the delta became inverted, to form ridges, by erosion. Channels can be inverted by erosion on both Earth and Mars. Usually this happens when the channel floor, or the material filling the channel, is harder to erode than the surrounding material into which the channel was cut. In, Scientifically, perhaps the most important result from use of the Mars Orbiter Camera on NASA's Mars Global Surveyor during that spacecraft's extended mission has been the discovery and documentation of a fossil delta. The feature is located in a crater northeast of Holden Crater, near 24.0 degrees south latitude, 33.7 degrees west longitude. Since the announcement of the discovery of the delta in November 2003, the International Astronomical Union has provided a provisional name (pending final approval) for the crater in which the landforms occur. The crater has been named Eberswalde, for a town in Germany. This image offers a higher-resolution view of a portion of the fossil delta than any seen earlier. North is up. At the bottom of the frame, the image includes the north end of a looping, inverted, meandering channel. The image covers an area of about 3 by 3 kilometers (1.9 x 1.9 miles). It was produced using a technique called "compensated pitch and roll targeted observation," in which the rotation rate of the spacecraft is adjusted to match the ground speed under the camera. At full resolution, this map-projected image is at 50 centimeters (20 inches) per pixel. Additional images from Mars Orbiter Camera provide some context (figure 4) and show a nearby portion of the fossil delta's inverted channels (figure 5) at a spatial scale of 1.5 meters (about 5 feet) per pixel. The relative positions of these three images are indicated in a mosaic image of the entire delta (figure 1), for which the unmarked version was released in November 2003 (PIA04869 [ http://photojournal.jpl.nasa.gov/catalog/PIA04869 ], some cases, the channels on Earth and Mars have been filled by lava to make them more resistant to erosion. In the case of Eberswalde, there are no lava flows, instead, the channel floors may have been rendered resistant to erosion either by being better-cemented than the surrounding material, or composed of coarser-grained sediment (such as sand and gravel as opposed to silt), or both. The Mars Orbiter Camera was built and is operated by Malin Space Science Systems, San Diego, Calif. Mars Global Surveyor left Earth on Nov. 7, 1996, and began orbiting Mars on Sept. 12, 1997. JPL, a division of the California Institute of Technology, Pasadena, manages Mars Global Surveyor for NASA's Science Mission Directorate, Washington.
Eberswalde Delta in High Res …
PIA04293
Sol (our sun)
Mars Orbiter Camera
Title Eberswalde Delta in High Resolution
Original Caption Released with Image ). The first Mars Orbiter Camera narrow angle images of some of the landforms in the delta were acquired in 2000, during the Mars Global Surveyor primary mission, but those pictures did not show very well the unambiguous inverted channel forms. Not until the second Earth year of the orbiter's extended mission were the deltaic features recognized in Mars Orbiter Camera images obtained in March and June of 2002. Following the initial observations in 2002, the Mars Orbiter Camera team began a systematic effort to map the entire Eberswalde Crater delta. Most of this imaging required slewing the whole spacecraft in a technique called "roll only targeted observation" so that it pointed the camera toward the feature. In this way, the camera team was able to build up a mosaic of the delta much more quickly than would have been the case if the team had simply relied upon chance crossing of the delta by the orbiter's usual ground track. This technique was not employed during Mars Global Surveyor's primary mission, except in the search for Mars Polar Lander, but became a routine part of the tool kit during the extended mission. Even with the "roll only targeted observation" technique, it took more than one Earth year to build up a complete mosaic of images of the delta. In the meantime, the first data showing the deltaic landforms were archived and released to the public and scientific community, long before the Mars Orbiter Camera team's analysis and mosaic were complete. Some scientists began independent analyses of the landform at that time. The initial analysis and announcement of the feature was finally published in November 2003. The Eberswalde delta provides the first clear, "smoking gun" evidence that some valleys on Mars experienced persistent flow of a liquid with the physical properties of water over an extended period of time, as do rivers on Earth. In addition, because the delta today is lithified -- that is, hardened to form rock -- it provided the first unambiguous evidence that some martian sedimentary rocks were deposited in a liquid (presumably, water) environment. The presence of meandering channels, a cut-off meander, and crisscrossing channels at different elevations (one above the other), provided the clear geologic evidence for these interpretations. After the sediments were deposited to form the delta, the material was further buried by other materials -- probably sediments -- that are no longer present. The entire package of buried material became cemented and hardened to form rock. Later, erosive processes such as wind stripped away the overlying rock, re-exposing the delta. Now preserved essentially as a fossil, the former floors of channels in the delta became inverted, to form ridges, by erosion. Channels can be inverted by erosion on both Earth and Mars. Usually this happens when the channel floor, or the material filling the channel, is harder to erode than the surrounding material into which the channel was cut. In, Scientifically, perhaps the most important result from use of the Mars Orbiter Camera on NASA's Mars Global Surveyor during that spacecraft's extended mission has been the discovery and documentation of a fossil delta. The feature is located in a crater northeast of Holden Crater, near 24.0 degrees south latitude, 33.7 degrees west longitude. Since the announcement of the discovery of the delta in November 2003, the International Astronomical Union has provided a provisional name (pending final approval) for the crater in which the landforms occur. The crater has been named Eberswalde, for a town in Germany. This image offers a higher-resolution view of a portion of the fossil delta than any seen earlier. North is up. At the bottom of the frame, the image includes the north end of a looping, inverted, meandering channel. The image covers an area of about 3 by 3 kilometers (1.9 x 1.9 miles). It was produced using a technique called "compensated pitch and roll targeted observation," in which the rotation rate of the spacecraft is adjusted to match the ground speed under the camera. At full resolution, this map-projected image is at 50 centimeters (20 inches) per pixel. Additional images from Mars Orbiter Camera provide some context (figure 4) and show a nearby portion of the fossil delta's inverted channels (figure 5) at a spatial scale of 1.5 meters (about 5 feet) per pixel. The relative positions of these three images are indicated in a mosaic image of the entire delta (figure 1), for which the unmarked version was released in November 2003 (PIA04869 [ http://photojournal.jpl.nasa.gov/catalog/PIA04869 ], some cases, the channels on Earth and Mars have been filled by lava to make them more resistant to erosion. In the case of Eberswalde, there are no lava flows, instead, the channel floors may have been rendered resistant to erosion either by being better-cemented than the surrounding material, or composed of coarser-grained sediment (such as sand and gravel as opposed to silt), or both. The Mars Orbiter Camera was built and is operated by Malin Space Science Systems, San Diego, Calif. Mars Global Surveyor left Earth on Nov. 7, 1996, and began orbiting Mars on Sept. 12, 1997. JPL, a division of the California Institute of Technology, Pasadena, manages Mars Global Surveyor for NASA's Science Mission Directorate, Washington.
Eberswalde Delta in High Res …
PIA04293
Sol (our sun)
Mars Orbiter Camera
Title Eberswalde Delta in High Resolution
Original Caption Released with Image ). The first Mars Orbiter Camera narrow angle images of some of the landforms in the delta were acquired in 2000, during the Mars Global Surveyor primary mission, but those pictures did not show very well the unambiguous inverted channel forms. Not until the second Earth year of the orbiter's extended mission were the deltaic features recognized in Mars Orbiter Camera images obtained in March and June of 2002. Following the initial observations in 2002, the Mars Orbiter Camera team began a systematic effort to map the entire Eberswalde Crater delta. Most of this imaging required slewing the whole spacecraft in a technique called "roll only targeted observation" so that it pointed the camera toward the feature. In this way, the camera team was able to build up a mosaic of the delta much more quickly than would have been the case if the team had simply relied upon chance crossing of the delta by the orbiter's usual ground track. This technique was not employed during Mars Global Surveyor's primary mission, except in the search for Mars Polar Lander, but became a routine part of the tool kit during the extended mission. Even with the "roll only targeted observation" technique, it took more than one Earth year to build up a complete mosaic of images of the delta. In the meantime, the first data showing the deltaic landforms were archived and released to the public and scientific community, long before the Mars Orbiter Camera team's analysis and mosaic were complete. Some scientists began independent analyses of the landform at that time. The initial analysis and announcement of the feature was finally published in November 2003. The Eberswalde delta provides the first clear, "smoking gun" evidence that some valleys on Mars experienced persistent flow of a liquid with the physical properties of water over an extended period of time, as do rivers on Earth. In addition, because the delta today is lithified -- that is, hardened to form rock -- it provided the first unambiguous evidence that some martian sedimentary rocks were deposited in a liquid (presumably, water) environment. The presence of meandering channels, a cut-off meander, and crisscrossing channels at different elevations (one above the other), provided the clear geologic evidence for these interpretations. After the sediments were deposited to form the delta, the material was further buried by other materials -- probably sediments -- that are no longer present. The entire package of buried material became cemented and hardened to form rock. Later, erosive processes such as wind stripped away the overlying rock, re-exposing the delta. Now preserved essentially as a fossil, the former floors of channels in the delta became inverted, to form ridges, by erosion. Channels can be inverted by erosion on both Earth and Mars. Usually this happens when the channel floor, or the material filling the channel, is harder to erode than the surrounding material into which the channel was cut. In, Scientifically, perhaps the most important result from use of the Mars Orbiter Camera on NASA's Mars Global Surveyor during that spacecraft's extended mission has been the discovery and documentation of a fossil delta. The feature is located in a crater northeast of Holden Crater, near 24.0 degrees south latitude, 33.7 degrees west longitude. Since the announcement of the discovery of the delta in November 2003, the International Astronomical Union has provided a provisional name (pending final approval) for the crater in which the landforms occur. The crater has been named Eberswalde, for a town in Germany. This image offers a higher-resolution view of a portion of the fossil delta than any seen earlier. North is up. At the bottom of the frame, the image includes the north end of a looping, inverted, meandering channel. The image covers an area of about 3 by 3 kilometers (1.9 x 1.9 miles). It was produced using a technique called "compensated pitch and roll targeted observation," in which the rotation rate of the spacecraft is adjusted to match the ground speed under the camera. At full resolution, this map-projected image is at 50 centimeters (20 inches) per pixel. Additional images from Mars Orbiter Camera provide some context (figure 4) and show a nearby portion of the fossil delta's inverted channels (figure 5) at a spatial scale of 1.5 meters (about 5 feet) per pixel. The relative positions of these three images are indicated in a mosaic image of the entire delta (figure 1), for which the unmarked version was released in November 2003 (PIA04869 [ http://photojournal.jpl.nasa.gov/catalog/PIA04869 ], some cases, the channels on Earth and Mars have been filled by lava to make them more resistant to erosion. In the case of Eberswalde, there are no lava flows, instead, the channel floors may have been rendered resistant to erosion either by being better-cemented than the surrounding material, or composed of coarser-grained sediment (such as sand and gravel as opposed to silt), or both. The Mars Orbiter Camera was built and is operated by Malin Space Science Systems, San Diego, Calif. Mars Global Surveyor left Earth on Nov. 7, 1996, and began orbiting Mars on Sept. 12, 1997. JPL, a division of the California Institute of Technology, Pasadena, manages Mars Global Surveyor for NASA's Science Mission Directorate, Washington.
Eberswalde Delta in High Res …
PIA04293
Sol (our sun)
Mars Orbiter Camera
Title Eberswalde Delta in High Resolution
Original Caption Released with Image ). The first Mars Orbiter Camera narrow angle images of some of the landforms in the delta were acquired in 2000, during the Mars Global Surveyor primary mission, but those pictures did not show very well the unambiguous inverted channel forms. Not until the second Earth year of the orbiter's extended mission were the deltaic features recognized in Mars Orbiter Camera images obtained in March and June of 2002. Following the initial observations in 2002, the Mars Orbiter Camera team began a systematic effort to map the entire Eberswalde Crater delta. Most of this imaging required slewing the whole spacecraft in a technique called "roll only targeted observation" so that it pointed the camera toward the feature. In this way, the camera team was able to build up a mosaic of the delta much more quickly than would have been the case if the team had simply relied upon chance crossing of the delta by the orbiter's usual ground track. This technique was not employed during Mars Global Surveyor's primary mission, except in the search for Mars Polar Lander, but became a routine part of the tool kit during the extended mission. Even with the "roll only targeted observation" technique, it took more than one Earth year to build up a complete mosaic of images of the delta. In the meantime, the first data showing the deltaic landforms were archived and released to the public and scientific community, long before the Mars Orbiter Camera team's analysis and mosaic were complete. Some scientists began independent analyses of the landform at that time. The initial analysis and announcement of the feature was finally published in November 2003. The Eberswalde delta provides the first clear, "smoking gun" evidence that some valleys on Mars experienced persistent flow of a liquid with the physical properties of water over an extended period of time, as do rivers on Earth. In addition, because the delta today is lithified -- that is, hardened to form rock -- it provided the first unambiguous evidence that some martian sedimentary rocks were deposited in a liquid (presumably, water) environment. The presence of meandering channels, a cut-off meander, and crisscrossing channels at different elevations (one above the other), provided the clear geologic evidence for these interpretations. After the sediments were deposited to form the delta, the material was further buried by other materials -- probably sediments -- that are no longer present. The entire package of buried material became cemented and hardened to form rock. Later, erosive processes such as wind stripped away the overlying rock, re-exposing the delta. Now preserved essentially as a fossil, the former floors of channels in the delta became inverted, to form ridges, by erosion. Channels can be inverted by erosion on both Earth and Mars. Usually this happens when the channel floor, or the material filling the channel, is harder to erode than the surrounding material into which the channel was cut. In, Scientifically, perhaps the most important result from use of the Mars Orbiter Camera on NASA's Mars Global Surveyor during that spacecraft's extended mission has been the discovery and documentation of a fossil delta. The feature is located in a crater northeast of Holden Crater, near 24.0 degrees south latitude, 33.7 degrees west longitude. Since the announcement of the discovery of the delta in November 2003, the International Astronomical Union has provided a provisional name (pending final approval) for the crater in which the landforms occur. The crater has been named Eberswalde, for a town in Germany. This image offers a higher-resolution view of a portion of the fossil delta than any seen earlier. North is up. At the bottom of the frame, the image includes the north end of a looping, inverted, meandering channel. The image covers an area of about 3 by 3 kilometers (1.9 x 1.9 miles). It was produced using a technique called "compensated pitch and roll targeted observation," in which the rotation rate of the spacecraft is adjusted to match the ground speed under the camera. At full resolution, this map-projected image is at 50 centimeters (20 inches) per pixel. Additional images from Mars Orbiter Camera provide some context (figure 4) and show a nearby portion of the fossil delta's inverted channels (figure 5) at a spatial scale of 1.5 meters (about 5 feet) per pixel. The relative positions of these three images are indicated in a mosaic image of the entire delta (figure 1), for which the unmarked version was released in November 2003 (PIA04869 [ http://photojournal.jpl.nasa.gov/catalog/PIA04869 ], some cases, the channels on Earth and Mars have been filled by lava to make them more resistant to erosion. In the case of Eberswalde, there are no lava flows, instead, the channel floors may have been rendered resistant to erosion either by being better-cemented than the surrounding material, or composed of coarser-grained sediment (such as sand and gravel as opposed to silt), or both. The Mars Orbiter Camera was built and is operated by Malin Space Science Systems, San Diego, Calif. Mars Global Surveyor left Earth on Nov. 7, 1996, and began orbiting Mars on Sept. 12, 1997. JPL, a division of the California Institute of Technology, Pasadena, manages Mars Global Surveyor for NASA's Science Mission Directorate, Washington.
Eberswalde Delta in High Res …
PIA04293
Sol (our sun)
Mars Orbiter Camera
Title Eberswalde Delta in High Resolution
Original Caption Released with Image ). The first Mars Orbiter Camera narrow angle images of some of the landforms in the delta were acquired in 2000, during the Mars Global Surveyor primary mission, but those pictures did not show very well the unambiguous inverted channel forms. Not until the second Earth year of the orbiter's extended mission were the deltaic features recognized in Mars Orbiter Camera images obtained in March and June of 2002. Following the initial observations in 2002, the Mars Orbiter Camera team began a systematic effort to map the entire Eberswalde Crater delta. Most of this imaging required slewing the whole spacecraft in a technique called "roll only targeted observation" so that it pointed the camera toward the feature. In this way, the camera team was able to build up a mosaic of the delta much more quickly than would have been the case if the team had simply relied upon chance crossing of the delta by the orbiter's usual ground track. This technique was not employed during Mars Global Surveyor's primary mission, except in the search for Mars Polar Lander, but became a routine part of the tool kit during the extended mission. Even with the "roll only targeted observation" technique, it took more than one Earth year to build up a complete mosaic of images of the delta. In the meantime, the first data showing the deltaic landforms were archived and released to the public and scientific community, long before the Mars Orbiter Camera team's analysis and mosaic were complete. Some scientists began independent analyses of the landform at that time. The initial analysis and announcement of the feature was finally published in November 2003. The Eberswalde delta provides the first clear, "smoking gun" evidence that some valleys on Mars experienced persistent flow of a liquid with the physical properties of water over an extended period of time, as do rivers on Earth. In addition, because the delta today is lithified -- that is, hardened to form rock -- it provided the first unambiguous evidence that some martian sedimentary rocks were deposited in a liquid (presumably, water) environment. The presence of meandering channels, a cut-off meander, and crisscrossing channels at different elevations (one above the other), provided the clear geologic evidence for these interpretations. After the sediments were deposited to form the delta, the material was further buried by other materials -- probably sediments -- that are no longer present. The entire package of buried material became cemented and hardened to form rock. Later, erosive processes such as wind stripped away the overlying rock, re-exposing the delta. Now preserved essentially as a fossil, the former floors of channels in the delta became inverted, to form ridges, by erosion. Channels can be inverted by erosion on both Earth and Mars. Usually this happens when the channel floor, or the material filling the channel, is harder to erode than the surrounding material into which the channel was cut. In, Scientifically, perhaps the most important result from use of the Mars Orbiter Camera on NASA's Mars Global Surveyor during that spacecraft's extended mission has been the discovery and documentation of a fossil delta. The feature is located in a crater northeast of Holden Crater, near 24.0 degrees south latitude, 33.7 degrees west longitude. Since the announcement of the discovery of the delta in November 2003, the International Astronomical Union has provided a provisional name (pending final approval) for the crater in which the landforms occur. The crater has been named Eberswalde, for a town in Germany. This image offers a higher-resolution view of a portion of the fossil delta than any seen earlier. North is up. At the bottom of the frame, the image includes the north end of a looping, inverted, meandering channel. The image covers an area of about 3 by 3 kilometers (1.9 x 1.9 miles). It was produced using a technique called "compensated pitch and roll targeted observation," in which the rotation rate of the spacecraft is adjusted to match the ground speed under the camera. At full resolution, this map-projected image is at 50 centimeters (20 inches) per pixel. Additional images from Mars Orbiter Camera provide some context (figure 4) and show a nearby portion of the fossil delta's inverted channels (figure 5) at a spatial scale of 1.5 meters (about 5 feet) per pixel. The relative positions of these three images are indicated in a mosaic image of the entire delta (figure 1), for which the unmarked version was released in November 2003 (PIA04869 [ http://photojournal.jpl.nasa.gov/catalog/PIA04869 ], some cases, the channels on Earth and Mars have been filled by lava to make them more resistant to erosion. In the case of Eberswalde, there are no lava flows, instead, the channel floors may have been rendered resistant to erosion either by being better-cemented than the surrounding material, or composed of coarser-grained sediment (such as sand and gravel as opposed to silt), or both. The Mars Orbiter Camera was built and is operated by Malin Space Science Systems, San Diego, Calif. Mars Global Surveyor left Earth on Nov. 7, 1996, and began orbiting Mars on Sept. 12, 1997. JPL, a division of the California Institute of Technology, Pasadena, manages Mars Global Surveyor for NASA's Science Mission Directorate, Washington.
Eberswalde Delta in High Res …
PIA04293
Sol (our sun)
Mars Orbiter Camera
Title Eberswalde Delta in High Resolution
Original Caption Released with Image ). The first Mars Orbiter Camera narrow angle images of some of the landforms in the delta were acquired in 2000, during the Mars Global Surveyor primary mission, but those pictures did not show very well the unambiguous inverted channel forms. Not until the second Earth year of the orbiter's extended mission were the deltaic features recognized in Mars Orbiter Camera images obtained in March and June of 2002. Following the initial observations in 2002, the Mars Orbiter Camera team began a systematic effort to map the entire Eberswalde Crater delta. Most of this imaging required slewing the whole spacecraft in a technique called "roll only targeted observation" so that it pointed the camera toward the feature. In this way, the camera team was able to build up a mosaic of the delta much more quickly than would have been the case if the team had simply relied upon chance crossing of the delta by the orbiter's usual ground track. This technique was not employed during Mars Global Surveyor's primary mission, except in the search for Mars Polar Lander, but became a routine part of the tool kit during the extended mission. Even with the "roll only targeted observation" technique, it took more than one Earth year to build up a complete mosaic of images of the delta. In the meantime, the first data showing the deltaic landforms were archived and released to the public and scientific community, long before the Mars Orbiter Camera team's analysis and mosaic were complete. Some scientists began independent analyses of the landform at that time. The initial analysis and announcement of the feature was finally published in November 2003. The Eberswalde delta provides the first clear, "smoking gun" evidence that some valleys on Mars experienced persistent flow of a liquid with the physical properties of water over an extended period of time, as do rivers on Earth. In addition, because the delta today is lithified -- that is, hardened to form rock -- it provided the first unambiguous evidence that some martian sedimentary rocks were deposited in a liquid (presumably, water) environment. The presence of meandering channels, a cut-off meander, and crisscrossing channels at different elevations (one above the other), provided the clear geologic evidence for these interpretations. After the sediments were deposited to form the delta, the material was further buried by other materials -- probably sediments -- that are no longer present. The entire package of buried material became cemented and hardened to form rock. Later, erosive processes such as wind stripped away the overlying rock, re-exposing the delta. Now preserved essentially as a fossil, the former floors of channels in the delta became inverted, to form ridges, by erosion. Channels can be inverted by erosion on both Earth and Mars. Usually this happens when the channel floor, or the material filling the channel, is harder to erode than the surrounding material into which the channel was cut. In, Scientifically, perhaps the most important result from use of the Mars Orbiter Camera on NASA's Mars Global Surveyor during that spacecraft's extended mission has been the discovery and documentation of a fossil delta. The feature is located in a crater northeast of Holden Crater, near 24.0 degrees south latitude, 33.7 degrees west longitude. Since the announcement of the discovery of the delta in November 2003, the International Astronomical Union has provided a provisional name (pending final approval) for the crater in which the landforms occur. The crater has been named Eberswalde, for a town in Germany. This image offers a higher-resolution view of a portion of the fossil delta than any seen earlier. North is up. At the bottom of the frame, the image includes the north end of a looping, inverted, meandering channel. The image covers an area of about 3 by 3 kilometers (1.9 x 1.9 miles). It was produced using a technique called "compensated pitch and roll targeted observation," in which the rotation rate of the spacecraft is adjusted to match the ground speed under the camera. At full resolution, this map-projected image is at 50 centimeters (20 inches) per pixel. Additional images from Mars Orbiter Camera provide some context (figure 4) and show a nearby portion of the fossil delta's inverted channels (figure 5) at a spatial scale of 1.5 meters (about 5 feet) per pixel. The relative positions of these three images are indicated in a mosaic image of the entire delta (figure 1), for which the unmarked version was released in November 2003 (PIA04869 [ http://photojournal.jpl.nasa.gov/catalog/PIA04869 ], some cases, the channels on Earth and Mars have been filled by lava to make them more resistant to erosion. In the case of Eberswalde, there are no lava flows, instead, the channel floors may have been rendered resistant to erosion either by being better-cemented than the surrounding material, or composed of coarser-grained sediment (such as sand and gravel as opposed to silt), or both. The Mars Orbiter Camera was built and is operated by Malin Space Science Systems, San Diego, Calif. Mars Global Surveyor left Earth on Nov. 7, 1996, and began orbiting Mars on Sept. 12, 1997. JPL, a division of the California Institute of Technology, Pasadena, manages Mars Global Surveyor for NASA's Science Mission Directorate, Washington.
Depth-to-Ice Map of a Southe …
PIA09336
Sol (our sun)
Thermal Emission Imaging Sys …
Title Depth-to-Ice Map of a Southern Mars Site Near Melea Planum
Original Caption Released with Image Color coding in this map of a far-southern site on Mars indicates the change in nighttime ground-surface temperature between summer and fall. This site, like most of high-latitude Mars, has water ice mixed with soil near the surface. The ice is probably in a rock-hard frozen layer beneath a few centimeters or inches of looser, dry soil. The amount of temperature change at the surface likely corresponds to how close to the surface the icy material lies. The dense, icy layer retains heat better than the looser soil above it, so where the icy layer is closer to the surface, the surface temperature changes more slowly than where the icy layer is buried deeper. On the map, areas of the surface that cooled more slowly between summer and autumn (interpreted as having the ice closer to the surface) are coded blue and green. Areas that cooled more quickly (interpreted as having more distance to the ice) are coded red and yellow. The depth to the top of the icy layer estimated from these observations suggests that in some areas, but not others, water is being exchanged by diffusion between atmospheric water vapor and subsurface water ice. Differences in what type of material lies above the ice appear to affect the depth to the ice. The area in this image with the greatest seasonal change in surface temperature corresponds to an area of sand dunes. This map and its interpretation are in a May 3, 2007, report in the journal "Nature", by Joshua Bandfield of Arizona State University, Tempe. The Thermal Emission Imaging System camera on NASA's Mars Odyssey orbiter collected the data presented in the map. The site is centered near 67 degrees south latitude, 36.5 degrees east longitude, near a plain named Melea Planum. This site is within the portion of the planet where, in 2002, the Gamma Ray Spectrometer suite of instruments on Mars Odyssey found evidence for water ice lying just below the surface. The information from the Gamma Ray Spectrometer is averaged over patches of ground hundreds of kilometers or miles wide. The information from the Thermal Emission Imaging System allows more than 100-fold higher resolution in mapping variations in the depth to ice. The Thermal Emission Imaging System observed the site in infrared wavelengths during night time, providing surface-temperature information. It did so once on Dec. 27, 2005, during late summer in Mars' southern hemisphere, and again on Jan. 22, 2006, the first day of autumn there. The colors on this map signify relative differences in how much the surface temperature changed between those two observations. Blue indicates the locations with the least change. Red indicates areas with most change. Modeling provides estimates that the range of temperature changes shown in this map corresponds to a range in depth-to-ice of less than 1 centimeter (0.4 inch) to more than 19 centimeters (more than 7.5 inches). The sensitivity of this method for estimating the depth is not good for depths greater than about 20 centimeters (8 inches). The temperature-change data are overlaid on a mosaic of black-and-white, daytime images taken in infrared wavelengths by the same camera, providing information about shapes in the landscape. The 20-kilometer scale bar is 12.4 miles long. NASA's Jet Propulsion Laboratory manages the Mars Odyssey mission for NASA's Science Mission Directorate, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University in collaboration with Raytheon Santa Barbara Remote Sensing. Lockheed Martin Space Systems, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Gusev Crater in Infrared
PIA05348
Sol (our sun)
Thermal Emission Imaging Sys …
Title Gusev Crater in Infrared
Original Caption Released with Image Released 8 January 2004 Long before the MER landers were named or launched, the two orbiters at Mars were asked to examine landing sites. Both the Odyssey and Mars Global Surveyor spacecraft have been collecting landing site data for the past two years. The MGS and ODY data were used as part of the decision making process in the final selection of the two landing sites. The types of data collected by the two orbiters included not only images of the surface but also thermal data about the surface composition, atmospheric data about the climate at each location, and the tracking of major dust storms in the region prior to landing. The presence of, and data collected by, the MGS and ODY orbiters have proven invaluable in MER mission planning. This infrared image covers most of the eastern side of Gusev Crater, slightly to the east of Spirit's landing spot. To the south, it shows the northern end of Ma'adim Vallis, which is thought to have brought water into Gusev Crater in the distant past. This image was taken on 2 August 2002. Image information: IR instrument. Latitude -14.4, Longitude 176.2 East (183.8 West). 100 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Gusev Crater in Infrared
PIA05348
Sol (our sun)
Thermal Emission Imaging Sys …
Title Gusev Crater in Infrared
Original Caption Released with Image Released 8 January 2004 Long before the MER landers were named or launched, the two orbiters at Mars were asked to examine landing sites. Both the Odyssey and Mars Global Surveyor spacecraft have been collecting landing site data for the past two years. The MGS and ODY data were used as part of the decision making process in the final selection of the two landing sites. The types of data collected by the two orbiters included not only images of the surface but also thermal data about the surface composition, atmospheric data about the climate at each location, and the tracking of major dust storms in the region prior to landing. The presence of, and data collected by, the MGS and ODY orbiters have proven invaluable in MER mission planning. This infrared image covers most of the eastern side of Gusev Crater, slightly to the east of Spirit's landing spot. To the south, it shows the northern end of Ma'adim Vallis, which is thought to have brought water into Gusev Crater in the distant past. This image was taken on 2 August 2002. Image information: IR instrument. Latitude -14.4, Longitude 176.2 East (183.8 West). 100 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Craters within Craters
PIA05353
Sol (our sun)
Thermal Emission Imaging Sys …
Title Craters within Craters
Original Caption Released with Image Released 15 January 2004 Long before the MER landers were named or launched, the two orbiters at Mars were asked to examine landing sites. Both the Odyssey and Mars Global Surveyor spacecraft have been collecting landing site data for the past two years. The MGS and ODY data were used as part of the decision making process in the final selection of the two landing sites. The types of data collected by the two orbiters included not only images of the surface but also thermal data about the surface composition, atmospheric data about the climate at each location, and the tracking of major dust storms in the region prior to landing. The presence of, and data collected by, the MGS and ODY orbiters have proven invaluable in MER mission planning. This image, taken on 25 April 2002, shows a smaller crater on the floor of the much larger Gusev Crater. Image information: VIS instrument. Latitude -14.8, Longitude 174.7 East (185.3 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Craters within Craters
PIA05353
Sol (our sun)
Thermal Emission Imaging Sys …
Title Craters within Craters
Original Caption Released with Image Released 15 January 2004 Long before the MER landers were named or launched, the two orbiters at Mars were asked to examine landing sites. Both the Odyssey and Mars Global Surveyor spacecraft have been collecting landing site data for the past two years. The MGS and ODY data were used as part of the decision making process in the final selection of the two landing sites. The types of data collected by the two orbiters included not only images of the surface but also thermal data about the surface composition, atmospheric data about the climate at each location, and the tracking of major dust storms in the region prior to landing. The presence of, and data collected by, the MGS and ODY orbiters have proven invaluable in MER mission planning. This image, taken on 25 April 2002, shows a smaller crater on the floor of the much larger Gusev Crater. Image information: VIS instrument. Latitude -14.8, Longitude 174.7 East (185.3 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Central Gusev
PIA05352
Sol (our sun)
Thermal Emission Imaging Sys …
Title Central Gusev
Original Caption Released with Image Released 14 January 2004 Long before the MER landers were named or launched, the two orbiters at Mars were asked to examine landing sites. Both the Odyssey and Mars Global Surveyor spacecraft have been collecting landing site data for the past two years. The MGS and ODY data were used as part of the decision making process in the final selection of the two landing sites. The types of data collected by the two orbiters included not only images of the surface but also thermal data about the surface composition, atmospheric data about the climate at each location, and the tracking of major dust storms in the region prior to landing. The presence of, and data collected by, the MGS and ODY orbiters have proven invaluable in MER mission planning. This visible-band image, captured on 27 July 2002, shows the south-central area of Gusev crater. Image information: VIS instrument. Latitude -14.8, Longitude 175 East (185 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Central Gusev
PIA05352
Sol (our sun)
Thermal Emission Imaging Sys …
Title Central Gusev
Original Caption Released with Image Released 14 January 2004 Long before the MER landers were named or launched, the two orbiters at Mars were asked to examine landing sites. Both the Odyssey and Mars Global Surveyor spacecraft have been collecting landing site data for the past two years. The MGS and ODY data were used as part of the decision making process in the final selection of the two landing sites. The types of data collected by the two orbiters included not only images of the surface but also thermal data about the surface composition, atmospheric data about the climate at each location, and the tracking of major dust storms in the region prior to landing. The presence of, and data collected by, the MGS and ODY orbiters have proven invaluable in MER mission planning. This visible-band image, captured on 27 July 2002, shows the south-central area of Gusev crater. Image information: VIS instrument. Latitude -14.8, Longitude 175 East (185 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Southern Gusev
PIA05349
Sol (our sun)
Thermal Emission Imaging Sys …
Title Southern Gusev
Original Caption Released with Image Released 9 January 2004 Long before the MER landers were named or launched, the two orbiters at Mars were asked to examine landing sites. Both the Odyssey and Mars Global Surveyor spacecraft have been collecting landing site data for the past two years. The MGS and ODY data were used as part of the decision making process in the final selection of the two landing sites. The types of data collected by the two orbiters included not only images of the surface but also thermal data about the surface composition, atmospheric data about the climate at each location, and the tracking of major dust storms in the region prior to landing. The presence of, and data collected by, the MGS and ODY orbiters have proven invaluable in MER mission planning. This image, captured 22 June 2002, shows the southern area of Gusev crater and the northern end of Ma'adim Vallis, which is thought to have brought water into Gusev crater in the distant past. Image information: VIS instrument. Latitude -15.4, Longitude 175.6 East (184.4 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Southern Gusev
PIA05349
Sol (our sun)
Thermal Emission Imaging Sys …
Title Southern Gusev
Original Caption Released with Image Released 9 January 2004 Long before the MER landers were named or launched, the two orbiters at Mars were asked to examine landing sites. Both the Odyssey and Mars Global Surveyor spacecraft have been collecting landing site data for the past two years. The MGS and ODY data were used as part of the decision making process in the final selection of the two landing sites. The types of data collected by the two orbiters included not only images of the surface but also thermal data about the surface composition, atmospheric data about the climate at each location, and the tracking of major dust storms in the region prior to landing. The presence of, and data collected by, the MGS and ODY orbiters have proven invaluable in MER mission planning. This image, captured 22 June 2002, shows the southern area of Gusev crater and the northern end of Ma'adim Vallis, which is thought to have brought water into Gusev crater in the distant past. Image information: VIS instrument. Latitude -15.4, Longitude 175.6 East (184.4 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Northwest Meridiani
PIA05363
Sol (our sun)
Thermal Emission Imaging Sys …
Title Northwest Meridiani
Original Caption Released with Image Released 29 January 2004 Long before the MER landers were named or launched, the two orbiters at Mars were asked to examine landing sites. Both the Odyssey and Mars Global Surveyor spacecraft have been collecting landing site data for the past two years. The MGS and ODY data were used as part of the decision making process in the final selection of the two landing sites. The types of data collected by the two orbiters included not only images of the surface but also thermal data about the surface composition, atmospheric data about the climate at each location, and the tracking of major dust storms in the region prior to landing. The presence of, and data collected by, the MGS and ODY orbiters have proven invaluable in MER mission planning. This image, captured on 13 December 2002, covers an area to the north of Opportunity's landing spot in Meridiani Planum. Image information: VIS instrument. Latitude 1.7, Longitude 355.7 East (4.3 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Northwest Meridiani
PIA05363
Sol (our sun)
Thermal Emission Imaging Sys …
Title Northwest Meridiani
Original Caption Released with Image Released 29 January 2004 Long before the MER landers were named or launched, the two orbiters at Mars were asked to examine landing sites. Both the Odyssey and Mars Global Surveyor spacecraft have been collecting landing site data for the past two years. The MGS and ODY data were used as part of the decision making process in the final selection of the two landing sites. The types of data collected by the two orbiters included not only images of the surface but also thermal data about the surface composition, atmospheric data about the climate at each location, and the tracking of major dust storms in the region prior to landing. The presence of, and data collected by, the MGS and ODY orbiters have proven invaluable in MER mission planning. This image, captured on 13 December 2002, covers an area to the north of Opportunity's landing spot in Meridiani Planum. Image information: VIS instrument. Latitude 1.7, Longitude 355.7 East (4.3 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Auqakuh Vallis Channel
PIA05555
Sol (our sun)
Thermal Emission Imaging Sys …
Title Auqakuh Vallis Channel
Original Caption Released with Image Released 25 March 2004 The Odyssey spacecraft has completed a full Mars year of observations of the red planet. For the next several weeks the Image of the Day will look back over this first mars year. It will focus on four themes: 1) the poles - with the seasonal changes seen in the retreat and expansion of the caps, 2) craters - with a variety of morphologies relating to impact materials and later alteration, both infilling and exhumation, 3) channels - the clues to liquid surface flow, and 4) volcanic flow features. While some images have helped answer questions about the history of Mars, many have raised new questions that are still being investigated as Odyssey continues collecting data as it orbits Mars. The channel shown on the image is part of the Auqakuh Vallis region. It was collected December 4, 2002 during northern summer season. The local time is 5pm. The image shows liquid or ice carved channels and some dunes are also present on it. Image information: VIS instrument. Latitude 31.8, Longitude 61.4 East (298.6 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Auqakuh Vallis Channel
PIA05555
Sol (our sun)
Thermal Emission Imaging Sys …
Title Auqakuh Vallis Channel
Original Caption Released with Image Released 25 March 2004 The Odyssey spacecraft has completed a full Mars year of observations of the red planet. For the next several weeks the Image of the Day will look back over this first mars year. It will focus on four themes: 1) the poles - with the seasonal changes seen in the retreat and expansion of the caps, 2) craters - with a variety of morphologies relating to impact materials and later alteration, both infilling and exhumation, 3) channels - the clues to liquid surface flow, and 4) volcanic flow features. While some images have helped answer questions about the history of Mars, many have raised new questions that are still being investigated as Odyssey continues collecting data as it orbits Mars. The channel shown on the image is part of the Auqakuh Vallis region. It was collected December 4, 2002 during northern summer season. The local time is 5pm. The image shows liquid or ice carved channels and some dunes are also present on it. Image information: VIS instrument. Latitude 31.8, Longitude 61.4 East (298.6 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
Craters within Craters in Me …
PIA05364
Sol (our sun)
Thermal Emission Imaging Sys …
Title Craters within Craters in Meridiani
Original Caption Released with Image Released 30 January 2004 Long before the MER landers were named or launched, the two orbiters at Mars were asked to examine landing sites. Both the Odyssey and Mars Global Surveyor spacecraft have been collecting landing site data for the past two years. The MGS and ODY data were used as part of the decision making process in the final selection of the two landing sites. The types of data collected by the two orbiters included not only images of the surface but also thermal data about the surface composition, atmospheric data about the climate at each location, and the tracking of major dust storms in the region prior to landing. The presence of, and data collected by, the MGS and ODY orbiters have proven invaluable in MER mission planning. This image, captured on 13 December 2002, covers an area to the north of Opportunity's landing spot in Meridiani Planum. Image information: VIS instrument. Latitude 2.5, Longitude 355.1 East (4.9 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.
1 2 3
1-50 of 134