Browse All : International Space Station (ISS) of Florida and Japan from 2005

Name of Image	STS-114 Astronauts Participate in Extra-Vehicular Activity (EVA)
Date of Image	2005-07-28
Full Description	Launched on July 26, 2005 from the Kennedy Space Center in Florida, STS-114 was classified as Logistics Flight 1. Among the Station-related activities of the mission were the delivery of new supplies and the replacement of one of the orbital outpost's Control Moment Gyroscopes (CMGs). STS-114 also carried the Raffaello Multi-Purpose Logistics Module (MPLM) and the External Stowage Platform-2. In this photograph, astronaut Soichi Noguchi, STS-114 mission specialist representing the Japan Aerospace Exploration Agency (JAXA), participates in the mission?s first scheduled session of Extra-Vehicular Activity (EVA). Noguchi and crew mate Stephen K. Robinson (out of frame) completed a demonstration of Shuttle thermal protection repair techniques and enhancements to the ISS?s attitude control system during the successful 6 hour, 50 minute space walk.

Name of Image	Close-up of Shuttle Thermal Tiles in Space
Date of Image	2005-08-03
Full Description	Launched on July 26 2005, from the Kennedy Space Center in Florida, STS-114 was classified as Logistics Flight 1. Among the Station-related activities of the mission were the delivery of new supplies and the replacement of one of the orbital outpost's Control Moment Gyroscopes (CMGs). STS-114 also carried the Raffaello Multi-Purpose Logistics Module and the External Stowage Platform-2. A major focus of the mission was the testing and evaluation of new Space Shuttle flight safety, which included new inspection and repair techniques. Upon its approach to the International Space Station (ISS), the Space Shuttle Discovery underwent a photography session in order to assess any damages that may have occurred during its launch and/or journey through Space. The mission?s third and final Extra Vehicular Activity (EVA) included taking a close-up look and the repair of the damaged heat shield. Gap fillers were removed from between the orbiter?s heat-shielding tiles located on the craft?s underbelly. Never before had any repairs been done to an orbiter while still in space. This close up of the thermal tiles was taken by astronaut Stephen K. Robinson, STS-114 mission specialist (out of frame). Astronaut Soichi Noguchi, STS-114 mission specialist representing the Japan Aerospace Exploration (JAXA), can be seen in the background perched on a Space Station truss.

Name of Image	Astronaut Noguchi During STS-114 Space Walk
Date of Image	2005-07-28
Full Description	Launched on July 26, 2005 from the Kennedy Space Center in Florida, STS-114 was classified as Logistics Flight 1. Among the Station-related activities of the mission were the delivery of new supplies and the replacement of one of the orbital outpost's Control Moment Gyroscopes (CMGs). STS-114 also carried the Raffaello Multi-Purpose Logistics Module (MPLM) and the External Stowage Platform-2. In this photograph, astronaut Soichi Noguchi, STS-114 mission specialist representing the Japan Aerospace Exploration Agency (JAXA), participates in the mission?s first scheduled session of Extra Vehicular Activity (EVA). Noguchi and crew mate Stephen K. Robinson (out of frame) completed a demonstration of Shuttle thermal protection repair techniques and enhancements to the ISS?s attitude control system during the successful 6 hour, 50 minute space walk.

KENNEDY SPACE CENTER, FLA. - The International Space Station module Node 2 is lifted from its workstand in the Space Station Processing Facility. The module is being moved to a payload canister for transfer to the Operations and Checkout Building. There it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.

Description	KENNEDY SPACE CENTER, FLA. - The International Space Station module Node 2 is lifted from its workstand in the Space Station Processing Facility. The module is being moved to a payload canister for transfer to the Operations and Checkout Building. There it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.
Release Date	02/09/2005

KENNEDY SPACE CENTER, FLA. - Technicians in the Space Station Processing Facility complete attaching a crane to the International Space Station module Node 2. The module is being moved from a workstand to a payload canister for transfer to the Operations and Checkout Building. There it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.

Description	KENNEDY SPACE CENTER, FLA. - Technicians in the Space Station Processing Facility complete attaching a crane to the International Space Station module Node 2. The module is being moved from a workstand to a payload canister for transfer to the Operations and Checkout Building. There it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.
Release Date	02/09/2005

KENNEDY SPACE CENTER, FLA. - The International Space Station module Node 2 moves along the top of the Space Station Processing Facility. The module is being moved to a payload canister for transfer to the Operations and Checkout Building. There it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.

Description	KENNEDY SPACE CENTER, FLA. - The International Space Station module Node 2 moves along the top of the Space Station Processing Facility. The module is being moved to a payload canister for transfer to the Operations and Checkout Building. There it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.
Release Date	02/09/2005

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, technicians stand by as the International Space Station module Node 2 is lowered into a payload canister. The module is being transferred to the Operations and Checkout Building where it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.

Description	KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, technicians stand by as the International Space Station module Node 2 is lowered into a payload canister. The module is being transferred to the Operations and Checkout Building where it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.
Release Date	02/09/2005

Description	KENNEDY SPACE CENTER, FLA. - The International Space Station module Node 2 moves along the top of the Space Station Processing Facility. The module is being moved to a payload canister for transfer to the Operations and Checkout Building. There it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.
Release Date	02/09/2005

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, the International Space Station module Node 2 moves toward a payload canister at right. The module is being moved to the canister for transfer to the Operations and Checkout Building. There it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.

Description	KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, the International Space Station module Node 2 moves toward a payload canister at right. The module is being moved to the canister for transfer to the Operations and Checkout Building. There it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.
Release Date	02/09/2005

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, the International Space Station module Node 2 is lowered toward a payload canister. The module is being transferred to the Operations and Checkout Building where it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.

Description	KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, the International Space Station module Node 2 is lowered toward a payload canister. The module is being transferred to the Operations and Checkout Building where it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.
Release Date	02/09/2005

KENNEDY SPACE CENTER, FLA. - Technicians in the Space Station Processing Facility begin to attach a crane to the International Space Station module Node 2. The module is being moved from a workstand to a payload canister for transfer to the Operations and Checkout Building. There it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.

Description	KENNEDY SPACE CENTER, FLA. - Technicians in the Space Station Processing Facility begin to attach a crane to the International Space Station module Node 2. The module is being moved from a workstand to a payload canister for transfer to the Operations and Checkout Building. There it will undergo an element leak test. The installation of NASA's Node 2 will denote the U.S. Core Complete stage of International Space Station assembly and increase the living and working space inside the station to approximately 18,000 cubic feet. It also will allow the addition of international laboratories from Europe and Japan to the station. Node 2 will provide a passageway between four station science experiment facilities: the U.S. Destiny Laboratory, the Kibo Japanese Experiment Module, the European Columbus Laboratory and the Centrifuge Accommodation Module. It also will provide connecting ports for Multi-Purpose Logistics Modules, the Japanese H II Transfer Vehicle and the Pressurized Mating Adapter 2 to which Space Shuttles dock. The Space Station Robotic Arm, Canadarm2, can operate from a powered grapple fixture on the exterior of Node 2. It is scheduled for launch on shuttle mission STS-120, station assembly flight 10A.
Release Date	02/09/2005

KENNEDY SPACE CENTER, FLA. - After arriving at Kennedy Space Center?s Shuttle Landing Facility, STS-114 Mission Specialist Soichi Noguchi talks to the media. Noguchi is with the Japan Aerospace Exploration Agency. He and other crew members are taking part in the Terminal Countdown Demonstration Test (TCDT) over the next three days. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. This is Noguchi?s first space flight. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - After arriving at Kennedy Space Center?s Shuttle Landing Facility, STS-114 Mission Specialist Soichi Noguchi talks to the media. Noguchi is with the Japan Aerospace Exploration Agency. He and other crew members are taking part in the Terminal Countdown Demonstration Test (TCDT) over the next three days. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. This is Noguchi?s first space flight. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/01/2005

Description	KENNEDY SPACE CENTER, FLA. - After arriving at Kennedy Space Center?s Shuttle Landing Facility, STS-114 Mission Specialist Soichi Noguchi talks to the media. Noguchi is with the Japan Aerospace Exploration Agency. He and other crew members are taking part in the Terminal Countdown Demonstration Test (TCDT) over the next three days. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. This is Noguchi?s first space flight. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/01/2005

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Soichi Noguchi arrives at NASA?s Kennedy Space Center aboard a T-38 jet training aircraft. Noguchi is with the Japan Aerospace Exploration Agency. He and other crew members are taking part in the Terminal Countdown Demonstration Test (TCDT) over the next three days. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. This is Noguchi?s first space flight. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Soichi Noguchi arrives at NASA?s Kennedy Space Center aboard a T-38 jet training aircraft. Noguchi is with the Japan Aerospace Exploration Agency. He and other crew members are taking part in the Terminal Countdown Demonstration Test (TCDT) over the next three days. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. This is Noguchi?s first space flight. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/01/2005

KENNEDY SPACE CENTER, FLA. - During Terminal Countdown Demonstration Test (TCDT) activities at NASA?s Kennedy Space Center, the STS-114 crew takes part in training on an M-113, an armored personnel carrier that is used for speedy departure from the launch pad in an emergency. Seated in the M-113, left to right, are Commander Eileen Collins, Mission Specialist Stephen Robinson, Capt. George Hoggard, astronaut rescue team leader, Mission Specialists Andrew Thomas, Soichi Noguchi and Charles Camarda, and Pilot James Kelly. Noguchi is with the Japan Aerospace Exploration Agency. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - During Terminal Countdown Demonstration Test (TCDT) activities at NASA?s Kennedy Space Center, the STS-114 crew takes part in training on an M-113, an armored personnel carrier that is used for speedy departure from the launch pad in an emergency. Seated in the M-113, left to right, are Commander Eileen Collins, Mission Specialist Stephen Robinson, Capt. George Hoggard, astronaut rescue team leader, Mission Specialists Andrew Thomas, Soichi Noguchi and Charles Camarda, and Pilot James Kelly. Noguchi is with the Japan Aerospace Exploration Agency. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/02/2005

KENNEDY SPACE CENTER, FLA. - During Terminal Countdown Demonstration Test (TCDT) activities at NASA?s Kennedy Space Center, STS-114 Mission Specialist Soichi Noguchi is ready to practice driving an M-113, an armored personnel carrier that is used for speedy departure from the launch pad in an emergency. Behind him at left is Capt. George Hoggard, who is astronaut rescue team leader. Noguchi is with the Japan Aerospace Exploration Agency.The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - During Terminal Countdown Demonstration Test (TCDT) activities at NASA?s Kennedy Space Center, STS-114 Mission Specialist Soichi Noguchi is ready to practice driving an M-113, an armored personnel carrier that is used for speedy departure from the launch pad in an emergency. Behind him at left is Capt. George Hoggard, who is astronaut rescue team leader. Noguchi is with the Japan Aerospace Exploration Agency.The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/02/2005

Description	KENNEDY SPACE CENTER, FLA. - During Terminal Countdown Demonstration Test (TCDT) activities at NASA?s Kennedy Space Center, STS-114 Mission Specialist Soichi Noguchi drives an M-113, an armored personnel carrier that is used for speedy departure from the launch pad in an emergency. Behind him at left is Capt. George Hoggard, who is astronaut rescue team leader. Noguchi is with the Japan Aerospace Exploration Agency. The TCDT is held at KSC prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in simulated countdown activities. The test ends with a mock launch countdown culminating in a simulated main engine cutoff. The crew also spends time undergoing emergency egress training exercises at the launch pad. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/02/2005

KENNEDY SPACE CENTER, FLA. - STS-114 Commander Eileen Collins leads the way as the next Space Shuttle crew does a practice walkout from the Operations and Checkout Building en route to Launch Pad 39B for a mock launch countdown culminating in a simulated main engine cutoff. In the left row, from front, are Pilot James Kelly and Mission Specialists Wendy Lawrence, Charles Camarda, and Andrew Thomas. In the right row, from front, are Collins and Mission Specialists Soichi Noguchi and Stephen Robinson. Noguchi is with the Japan Aerospace Exploration Agency. The dress rehearsal is part of Terminal Countdown Demonstration Test (TCDT) activities held prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - STS-114 Commander Eileen Collins leads the way as the next Space Shuttle crew does a practice walkout from the Operations and Checkout Building en route to Launch Pad 39B for a mock launch countdown culminating in a simulated main engine cutoff. In the left row, from front, are Pilot James Kelly and Mission Specialists Wendy Lawrence, Charles Camarda, and Andrew Thomas. In the right row, from front, are Collins and Mission Specialists Soichi Noguchi and Stephen Robinson. Noguchi is with the Japan Aerospace Exploration Agency. The dress rehearsal is part of Terminal Countdown Demonstration Test (TCDT) activities held prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/04/2005

KENNEDY SPACE CENTER, FLA. - Outside the Operations and Checkout Building, STS-114 Commander Eileen Collins leads the way to the Astrovan that will transport the crew to Launch Pad 39B for a mock launch countdown culminating in a simulated main engine cutoff. In the left row, from front, are Pilot James Kelly and Mission Specialists Wendy Lawrence, Charles Camarda, and Andrew Thomas. In the right row, from front, are Collins and Mission Specialists Soichi Noguchi and Stephen Robinson. Noguchi is with the Japan Aerospace Exploration Agency. The dress rehearsal is part of Terminal Countdown Demonstration Test (TCDT) activities held prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - Outside the Operations and Checkout Building, STS-114 Commander Eileen Collins leads the way to the Astrovan that will transport the crew to Launch Pad 39B for a mock launch countdown culminating in a simulated main engine cutoff. In the left row, from front, are Pilot James Kelly and Mission Specialists Wendy Lawrence, Charles Camarda, and Andrew Thomas. In the right row, from front, are Collins and Mission Specialists Soichi Noguchi and Stephen Robinson. Noguchi is with the Japan Aerospace Exploration Agency. The dress rehearsal is part of Terminal Countdown Demonstration Test (TCDT) activities held prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/04/2005

KENNEDY SPACE CENTER, FLA. - The STS-114 crew partakes of the traditional breakfast in the crew quarters at the Operations and Checkout (O&C) Building prior to suit-up for the trip to Launch Pad 39B for a mock launch countdown culminating in a simulated main engine cutoff. Seated, from left, are Mission Specialist Wendy Lawrence, Pilot James Kelly, Mission Specialist Soichi Noguchi, Commander Eileen Collins, and Mission Specialists Andrew Thomas, Stephen Robinson, and Charles Camarda. Noguchi is with the Japan Aerospace Exploration Agency. The dress rehearsal is part of Terminal Countdown Demonstration Test (TCDT) activities held prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - The STS-114 crew partakes of the traditional breakfast in the crew quarters at the Operations and Checkout (O&C) Building prior to suit-up for the trip to Launch Pad 39B for a mock launch countdown culminating in a simulated main engine cutoff. Seated, from left, are Mission Specialist Wendy Lawrence, Pilot James Kelly, Mission Specialist Soichi Noguchi, Commander Eileen Collins, and Mission Specialists Andrew Thomas, Stephen Robinson, and Charles Camarda. Noguchi is with the Japan Aerospace Exploration Agency. The dress rehearsal is part of Terminal Countdown Demonstration Test (TCDT) activities held prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/04/2005

KENNEDY SPACE CENTER, FLA. - With a member of the Closeout Crew following behind, STS-114 Mission Specialist Soichi Noguchi heads for the White Room on Launch Pad 39B, where he will complete adjustments to his launch suit before entering Space Shuttle Discovery. Noguchi is with the Japan Aerospace Exploration Agency. The crew is taking part in a full dress rehearsal for launch, including countdown and culminating in main engine cutoff. The rehearsal is the final part of Terminal Countdown Demonstration Test (TCDT) activities that the crew has been involved in for three days. TCDT provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - With a member of the Closeout Crew following behind, STS-114 Mission Specialist Soichi Noguchi heads for the White Room on Launch Pad 39B, where he will complete adjustments to his launch suit before entering Space Shuttle Discovery. Noguchi is with the Japan Aerospace Exploration Agency. The crew is taking part in a full dress rehearsal for launch, including countdown and culminating in main engine cutoff. The rehearsal is the final part of Terminal Countdown Demonstration Test (TCDT) activities that the crew has been involved in for three days. TCDT provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/04/2005

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Soichi Noguchi holds the mission patch that will be attached to Space Shuttle Discovery for flight. Noguchi is with the Japan Aerospace Exploration Agency. The crew is taking part in a full dress rehearsal for launch, including countdown and culminating in main engine cutoff. The rehearsal is the final part of Terminal Countdown Demonstration Test (TCDT) activities that the crew has been involved in for three days. TCDT provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Soichi Noguchi holds the mission patch that will be attached to Space Shuttle Discovery for flight. Noguchi is with the Japan Aerospace Exploration Agency. The crew is taking part in a full dress rehearsal for launch, including countdown and culminating in main engine cutoff. The rehearsal is the final part of Terminal Countdown Demonstration Test (TCDT) activities that the crew has been involved in for three days. TCDT provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/04/2005

Description	KENNEDY SPACE CENTER, FLA. - The STS-114 crew partakes of the traditional breakfast in the crew quarters at the Operations and Checkout (O&C) Building prior to suit-up for the trip to Launch Pad 39B for a mock launch countdown culminating in a simulated main engine cutoff. Seated, from left, are Mission Specialist Wendy Lawrence, Pilot James Kelly, Mission Specialist Soichi Noguchi, Commander Eileen Collins, and Mission Specialists Andrew Thomas, Stephen Robinson, and Charles Camarda. Noguchi is with the Japan Aerospace Exploration Agency. The dress rehearsal is part of Terminal Countdown Demonstration Test (TCDT) activities held prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/04/2005

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialists Soichi Noguchi (left) and Charles Camarda are suited up in the Operations and Checkout Building and ready for the trip to Launch Pad 39B for a mock launch countdown culminating in a simulated main engine cutoff. Noguchi is with the Japan Aerospace Exploration Agency. The dress rehearsal is part of Terminal Countdown Demonstration Test (TCDT) activities held prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialists Soichi Noguchi (left) and Charles Camarda are suited up in the Operations and Checkout Building and ready for the trip to Launch Pad 39B for a mock launch countdown culminating in a simulated main engine cutoff. Noguchi is with the Japan Aerospace Exploration Agency. The dress rehearsal is part of Terminal Countdown Demonstration Test (TCDT) activities held prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/04/2005

KENNEDY SPACE CENTER, FLA. - A suit technician helps STS-114 Mission Specialist Soichi Noguchi suit up in the Operations and Checkout Building for the trip to Launch Pad 39B for a mock launch countdown culminating in a simulated main engine cutoff. Noguchi is with the Japan Aerospace Exploration Agency. The dress rehearsal is part of Terminal Countdown Demonstration Test (TCDT) activities held prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - A suit technician helps STS-114 Mission Specialist Soichi Noguchi suit up in the Operations and Checkout Building for the trip to Launch Pad 39B for a mock launch countdown culminating in a simulated main engine cutoff. Noguchi is with the Japan Aerospace Exploration Agency. The dress rehearsal is part of Terminal Countdown Demonstration Test (TCDT) activities held prior to each Space Shuttle flight. It provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/04/2005

KENNEDY SPACE CENTER, FLA. - After the conclusion of Terminal Countdown Demonstration Test (TCDT) activities at NASA?s Kennedy Space Center, STS-114 Mission Specialist Soichi Noguchi speaks to the media about his experiences in his first TCDT. Noguchi is with the Japan Aerospace Exploration Agency. The TCDT provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.

Description	KENNEDY SPACE CENTER, FLA. - After the conclusion of Terminal Countdown Demonstration Test (TCDT) activities at NASA?s Kennedy Space Center, STS-114 Mission Specialist Soichi Noguchi speaks to the media about his experiences in his first TCDT. Noguchi is with the Japan Aerospace Exploration Agency. The TCDT provides the crew of each mission an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency egress training. STS-114 is the first Return to Flight mission to the International Space Station. The launch window extends July 13 through July 31.
Release Date	05/04/2005

KENNEDY SPACE CENTER, FLA. - After their arrival at NASA?s Kennedy Space Center, the Return to Flight mission STS-114 crew talked briefly to media. Seen in the photo is Mission Specialist Charles Camarda. Other crew members are Mission Commander Eileen Collins, Pilot James Kelly, and Mission Specialists Soichi Noguchi, Wendy Lawrence, Andrew Thomas and Stephen Robinson. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. The crew arrived a day early due to weather concerns associated with Hurricane Dennis. This historic mission is the 114th Space Shuttle flight and the 17th U.S. flight to the International Space Station. STS-114 is scheduled to launch at 3:51 p.m. July 13 and last about 12 days with a planned KSC landing at about 11:01 a.m. EDT on July 25. On mission STS-114, the crew will perform inspections on orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.

Description	KENNEDY SPACE CENTER, FLA. - After their arrival at NASA?s Kennedy Space Center, the Return to Flight mission STS-114 crew talked briefly to media. Seen in the photo is Mission Specialist Charles Camarda. Other crew members are Mission Commander Eileen Collins, Pilot James Kelly, and Mission Specialists Soichi Noguchi, Wendy Lawrence, Andrew Thomas and Stephen Robinson. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. The crew arrived a day early due to weather concerns associated with Hurricane Dennis. This historic mission is the 114th Space Shuttle flight and the 17th U.S. flight to the International Space Station. STS-114 is scheduled to launch at 3:51 p.m. July 13 and last about 12 days with a planned KSC landing at about 11:01 a.m. EDT on July 25. On mission STS-114, the crew will perform inspections on orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.
Release Date	07/09/2005

KENNEDY SPACE CENTER, FLA. - After their arrival at NASA?s Kennedy Space Center, the Return to Flight mission STS-114 crew talked briefly to media. At the microphone is Mission Specialist Wendy Lawrence. Behind her (left to right) are Mission Specialist Andrew Thomas, Pilot James Kelly and Mission Specialist Soichi Noguchi, who is with the Japan Aerospace Exploration Agency, JAXA. Other crew members not pictured are Mission Commander Eileen Collins and Mission Specialists Charles Camarda and Stephen Robinson. The crew arrived a day early due to weather concerns associated with Hurricane Dennis. This historic mission is the 114th Space Shuttle flight and the 17th U.S. flight to the International Space Station. STS-114 is scheduled to launch at 3:51 p.m. July 13 and last about 12 days with a planned KSC landing at about 11:01 a.m. EDT on July 25. On mission STS-114, the crew will perform inspections on orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.

Description	KENNEDY SPACE CENTER, FLA. - After their arrival at NASA?s Kennedy Space Center, the Return to Flight mission STS-114 crew talked briefly to media. At the microphone is Mission Specialist Wendy Lawrence. Behind her (left to right) are Mission Specialist Andrew Thomas, Pilot James Kelly and Mission Specialist Soichi Noguchi, who is with the Japan Aerospace Exploration Agency, JAXA. Other crew members not pictured are Mission Commander Eileen Collins and Mission Specialists Charles Camarda and Stephen Robinson. The crew arrived a day early due to weather concerns associated with Hurricane Dennis. This historic mission is the 114th Space Shuttle flight and the 17th U.S. flight to the International Space Station. STS-114 is scheduled to launch at 3:51 p.m. July 13 and last about 12 days with a planned KSC landing at about 11:01 a.m. EDT on July 25. On mission STS-114, the crew will perform inspections on orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.
Release Date	07/09/2005

Description	KENNEDY SPACE CENTER, FLA. - After their arrival at NASA?s Kennedy Space Center, the Return to Flight mission STS-114 crew talked briefly to media. At the microphone is Mission Specialist Stephen Robinson. Behind him (left to right) are Mission Specialist Andrew Thomas, Pilot James Kelly and Mission Specialist Soichi Noguchi, who is with the Japan Aerospace Exploration Agency, JAXA. Other crew members not pictured are Mission Commander Eileen Collins and Mission Specialists Charles Camarda and Wendy Lawrence. The crew arrived a day early due to weather concerns associated with Hurricane Dennis. This historic mission is the 114th Space Shuttle flight and the 17th U.S. flight to the International Space Station. STS-114 is scheduled to launch at 3:51 p.m. July 13 and last about 12 days with a planned KSC landing at about 11:01 a.m. EDT on July 25. On mission STS-114, the crew will perform inspections on orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.
Release Date	07/09/2005

KENNEDY SPACE CENTER, FLA. - Center Director Jim Kennedy welcomes Mission Commander Eileen Collins to NASA?s Kennedy Space Center. She and the rest of the crew for Return to Flight mission STS-114 arrived aboard a Gulf Stream aircraft. The other crew members arriving are Pilot James Kelly and Mission Specialists Soichi Noguchi, Stephen Robinson, Andrew Thomas, Wendy Lawrence and Charles Camarda. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. The crew arrived a day early due to weather concerns associated with Hurricane Dennis. This historic mission is the 114th Space Shuttle flight and the 17th U.S. flight to the International Space Station. STS-114 is scheduled to launch at 3:51 p.m. July 13 and last about 12 days with a planned KSC landing at about 11:01 a.m. EDT on July 25. On mission STS-114, the crew will perform inspections on orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.

Description	KENNEDY SPACE CENTER, FLA. - Center Director Jim Kennedy welcomes Mission Commander Eileen Collins to NASA?s Kennedy Space Center. She and the rest of the crew for Return to Flight mission STS-114 arrived aboard a Gulf Stream aircraft. The other crew members arriving are Pilot James Kelly and Mission Specialists Soichi Noguchi, Stephen Robinson, Andrew Thomas, Wendy Lawrence and Charles Camarda. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. The crew arrived a day early due to weather concerns associated with Hurricane Dennis. This historic mission is the 114th Space Shuttle flight and the 17th U.S. flight to the International Space Station. STS-114 is scheduled to launch at 3:51 p.m. July 13 and last about 12 days with a planned KSC landing at about 11:01 a.m. EDT on July 25. On mission STS-114, the crew will perform inspections on orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.
Release Date	07/09/2005

Description	KENNEDY SPACE CENTER, FLA. - After their arrival at NASA?s Kennedy Space Center, the Return to Flight mission STS-114 crew talked briefly to media. At the microphone is an enthusiastic Soichi Noguchi, mission specialist, who is with the Japan Aerospace Exploration Agency, JAXA. He also spoke in Japanese to the Japanese media who were present. The rest of the crew members are Mission Commander Eileen Collins, Pilot James Kelly, and Mission Specialists Andrew Thomas, Charles Camarda, Wendy Lawrence and Stephen Robinson. The crew arrived a day early due to weather concerns associated with Hurricane Dennis. This historic mission is the 114th Space Shuttle flight and the 17th U.S. flight to the International Space Station. STS-114 is scheduled to launch at 3:51 p.m. July 13 and last about 12 days with a planned KSC landing at about 11:01 a.m. EDT on July 25. On mission STS-114, the crew will perform inspections on orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.
Release Date	07/09/2005

Description	KENNEDY SPACE CENTER, FLA. - After their arrival at NASA?s Kennedy Space Center, the Return to Flight mission STS-114 crew talked briefly to media. At the microphone is Mission Specialist Andrew Thomas. Behind him (left to right) are Mission Commander Eileen Collins, Pilot James Kelly and Mission Specialist Soichi Noguchi, who is with the Japan Aerospace Exploration Agency, JAXA. Other crew members not pictured are Mission Specialists Charles Camarda, Wendy Lawrence and Stephen Robinson. The crew arrived a day early due to weather concerns associated with Hurricane Dennis. This historic mission is the 114th Space Shuttle flight and the 17th U.S. flight to the International Space Station. STS-114 is scheduled to launch at 3:51 p.m. July 13 and last about 12 days with a planned KSC landing at about 11:01 a.m. EDT on July 25. On mission STS-114, the crew will perform inspections on orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.
Release Date	07/09/2005

Description	KENNEDY SPACE CENTER, FLA. - After their arrival at NASA?s Kennedy Space Center, the Return to Flight mission STS-114 crew talked briefly to media. At the microphone is Pilot James Kelly. Behind him (left to right) are Mission Commander Eileen Collins and Mission Specialists Andrew Thomas and Soichi Noguchi, who is with the Japan Aerospace Exploration Agency, JAXA. Other crew members not pictured are Mission Specialists Charles Camarda, Wendy Lawrence and Stephen Robinson. The crew arrived a day early due to weather concerns associated with Hurricane Dennis. This historic mission is the 114th Space Shuttle flight and the 17th U.S. flight to the International Space Station. STS-114 is scheduled to launch at 3:51 p.m. July 13 and last about 12 days with a planned KSC landing at about 11:01 a.m. EDT on July 25. On mission STS-114, the crew will perform inspections on orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.
Release Date	07/09/2005

Description	KENNEDY SPACE CENTER, FLA. - After their arrival at NASA?s Kennedy Space Center, the Return to Flight mission STS-114 crew talked briefly to media. At the microphone is Mission Commander Eileen Collins. Behind her are (left to right) Mission Specialist Andrew Thomas, Pilot James Kelly, and Mission Specialists Soichi Noguchi, Charles Camarda, Wendy Lawrence and Stephen Robinson. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. The crew arrived a day early due to weather concerns associated with Hurricane Dennis. This historic mission is the 114th Space Shuttle flight and the 17th U.S. flight to the International Space Station. STS-114 is scheduled to launch at 3:51 p.m. July 13 and last about 12 days with a planned KSC landing at about 11:01 a.m. EDT on July 25. On mission STS-114, the crew will perform inspections on orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.
Release Date	07/09/2005

Description	KENNEDY SPACE CENTER, FLA. - After their arrival at NASA?s Kennedy Space Center, the Return to Flight mission STS-114 crew talked briefly to media. At the microphone is Mission Commander Eileen Collins. Behind her are (left to right) Mission Specialists Stephen Robinson, Wendy Lawrence, Charles Camarda and Soichi Noguchi, Pilot James Kelly, and Mission Specialist Andrew Thomas. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. The crew arrived a day early due to weather concerns associated with Hurricane Dennis. This historic mission is the 114th Space Shuttle flight and the 17th U.S. flight to the International Space Station. STS-114 is scheduled to launch at 3:51 p.m. July 13 and last about 12 days with a planned KSC landing at about 11:01 a.m. EDT on July 25. On mission STS-114, the crew will perform inspections on orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.
Release Date	07/09/2005

Description	KENNEDY SPACE CENTER, FLA. - After their arrival at NASA?s Kennedy Space Center, the Return to Flight mission STS-114 crew talked briefly to media. At the microphone is Mission Commander Eileen Collins. Behind her are (left to right) Mission Specialist Andrew Thomas, Pilot James Kelly, and Mission Specialist Soichi Noguchi. Not pictured are Mission Specialists Charles Camarda, Wendy Lawrence and Stephen Robinson. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. The crew arrived a day early due to weather concerns associated with Hurricane Dennis. This historic mission is the 114th Space Shuttle flight and the 17th U.S. flight to the International Space Station. STS-114 is scheduled to launch at 3:51 p.m. July 13 and last about 12 days with a planned KSC landing at about 11:01 a.m. EDT on July 25. On mission STS-114, the crew will perform inspections on orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.
Release Date	07/09/2005

KENNEDY SPACE CENTER, FLA. - In the Operations and Checkout Building at NASA Kennedy Space Center, STS-114 Mission Specialist Soichi Noguchi has donned his launch and entry suit before heading to the launch pad. Noguchi is with the Japan Aerospace Exploration Agency and is making his first space flight on the historic Return to Flight mission STS-114 to the International Space Station. On its second attempt for launch, Discovery is scheduled to lift off at 10:39 a.m. EDT today from Launch Pad 39B. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7.

Description	KENNEDY SPACE CENTER, FLA. - In the Operations and Checkout Building at NASA Kennedy Space Center, STS-114 Mission Specialist Soichi Noguchi has donned his launch and entry suit before heading to the launch pad. Noguchi is with the Japan Aerospace Exploration Agency and is making his first space flight on the historic Return to Flight mission STS-114 to the International Space Station. On its second attempt for launch, Discovery is scheduled to lift off at 10:39 a.m. EDT today from Launch Pad 39B. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7.
Release Date	07/26/2005

KENNEDY SPACE CENTER, FLA. - The Return to Flight STS-114 crew exits the Operations and Checkout Building, heading for the bus that will transport them to Launch Pad 39B. On the left, front to back, are Pilot James Kelly and Mission Specialists Wendy Lawrence, Charles Camarda and Andrew Thomas. On the right, front to back, are Mission Commander Eileen Collins and Mission Specialists Soichi Noguchi and Stephen Robinson. Noguchi represents the Japan Aerospace Exploration Agency. On its second attempt for launch, Discovery is scheduled to lift off at 10:39 a.m. EDT today from Launch Pad 39B. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.

Description	KENNEDY SPACE CENTER, FLA. - The Return to Flight STS-114 crew exits the Operations and Checkout Building, heading for the bus that will transport them to Launch Pad 39B. On the left, front to back, are Pilot James Kelly and Mission Specialists Wendy Lawrence, Charles Camarda and Andrew Thomas. On the right, front to back, are Mission Commander Eileen Collins and Mission Specialists Soichi Noguchi and Stephen Robinson. Noguchi represents the Japan Aerospace Exploration Agency. On its second attempt for launch, Discovery is scheduled to lift off at 10:39 a.m. EDT today from Launch Pad 39B. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.
Release Date	07/26/2005

KENNEDY SPACE CENTER, FLA. - Wearing the traditional Hawaiian shirts, the STS-114 crew gathers after breakfast for the traditional cake before suiting up for launch. Seated left to right are Mission Specialist Wendy Lawrence, Pilot James Kelly, Mission Specialist Soichi Noguchi, Mission Commander Eileen Collins and Mission Specialists Andrew Thomas, Stephen Robinson and Charles Camarda. Noguchi represents the Japan Aerospace Exploration Agency (JAXA). The crew is scheduled to lift off aboard Space Shuttle Discovery on this historic Return to Flight mission to the International Space Station at 10:39 a.m. EDT today from Launch Pad 39B. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7.

Description	KENNEDY SPACE CENTER, FLA. - Wearing the traditional Hawaiian shirts, the STS-114 crew gathers after breakfast for the traditional cake before suiting up for launch. Seated left to right are Mission Specialist Wendy Lawrence, Pilot James Kelly, Mission Specialist Soichi Noguchi, Mission Commander Eileen Collins and Mission Specialists Andrew Thomas, Stephen Robinson and Charles Camarda. Noguchi represents the Japan Aerospace Exploration Agency (JAXA). The crew is scheduled to lift off aboard Space Shuttle Discovery on this historic Return to Flight mission to the International Space Station at 10:39 a.m. EDT today from Launch Pad 39B. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7.
Release Date	07/26/2005

KENNEDY SPACE CENTER, FLA. - The Return to Flight STS-114 crew heads for the bus that will transport them to Launch Pad 39B. From left, in front, are Mission Specialists Andrew Thomas, Charles Camarda and Wendy Lawrence, with Pilot James Kelly leading. In back are Mission Specialists Stephen Robinson and Soichi Noguchi, led by Mission Commander Eileen Collins. Noguchi represents the Japan Aerospace Exploration Agency. On its second attempt for launch, Discovery is scheduled to lift off at 10:39 a.m. EDT today from Launch Pad 39B. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.

Description	KENNEDY SPACE CENTER, FLA. - The Return to Flight STS-114 crew heads for the bus that will transport them to Launch Pad 39B. From left, in front, are Mission Specialists Andrew Thomas, Charles Camarda and Wendy Lawrence, with Pilot James Kelly leading. In back are Mission Specialists Stephen Robinson and Soichi Noguchi, led by Mission Commander Eileen Collins. Noguchi represents the Japan Aerospace Exploration Agency. On its second attempt for launch, Discovery is scheduled to lift off at 10:39 a.m. EDT today from Launch Pad 39B. It is the 114th Space Shuttle flight and the 31st for Discovery. The 12-day mission is expected to end with touchdown at the Shuttle Landing Facility on Aug. 7. On this mission to the International Space Station the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay. During two additional spacewalks, the crew will install the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure.
Release Date	07/26/2005

KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Soichi Noguchi is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. This is Noguchi?s first Shuttle flight. He represents the Japan Aerospace Exploration Agency. The Return to Flight mission to the International Space Station carries the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure and Multi-Purpose Logistics Module Raffaello, housing 15 tons of hardware and supplies that will be transferred to the Station after the Shuttle docks to the complex . On this mission, the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay.

Description	KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialist Soichi Noguchi is helped by the Closeout Crew with his launch and entry suit before entering Space Shuttle Discovery. This is Noguchi?s first Shuttle flight. He represents the Japan Aerospace Exploration Agency. The Return to Flight mission to the International Space Station carries the External Stowage Platform-2, equipped with spare part assemblies, and a replacement Control Moment Gyroscope contained in the Lightweight Multi-Purpose Experiment Support Structure and Multi-Purpose Logistics Module Raffaello, housing 15 tons of hardware and supplies that will be transferred to the Station after the Shuttle docks to the complex . On this mission, the crew will perform inspections on-orbit for the first time of all of the Reinforced Carbon-Carbon (RCC) panels on the leading edge of the wings and the Thermal Protection System tiles using the new Canadian-built Orbiter Boom Sensor System and the data from 176 impact and temperature sensors. Mission Specialists will also practice repair techniques on RCC and tile samples during a spacewalk in the payload bay.
Release Date	07/26/2005

Narrow Search

Remove

What

Where

Who

When

Browse All : International Space Station (ISS) of Florida and Japan from 2005