|
|
Browse All
:
High Resolution Imaging Science Experiment (HiRISE) of Jet Propulsion Laboratory
|
Printer Friendly |
Mars Reconnaissance Orbiter
…
| title |
Mars Reconnaissance Orbiter Takes Its First Look |
| date |
03.24.2006 |
| description |
This view shows a full-resolution portion of the first image of Mars taken by the High Resolution Imaging Science Experiment camera (HiRISE) on NASA's Mars Reconnaissance Orbiter. The spacecraft, launched Aug. 12, 2005, began orbiting Mars on March 10, 2006. The image is of an area in Mars' mid-latitude southern highlands. HiRISE took this first test image from orbit on March 24, 2006, from an altitude of 2,489 kilometers (1,547 miles), achieving a resolution of 2.49 meters (98 inches) per pixel, or picture element. The smallest objects of discernable shape are about three pixels across. An image acquired at this latitude during the Mars Reconnaissance Orbiter's main science phase, beginning in fall 2006, would be taken from an altitude of about 280 kilometers (174 miles) and have a resolution of 28 centimeters (11 inches) per pixel. This view covers an area about 4.5 by 2.1 kilometers (1.6 by 1.3 miles), a subset of the broader image. The quality of this test image is spectacular, with no hint to the eye of any smear or blurring. A high signal-to-noise ratio reveals fine details even in the shadows. Image Credit: NASA/JPL/University of Arizona |
|
Victoria Crater' at Meridian
…
| title |
Victoria Crater' at Meridiani Planum |
| date |
10.06.2006 |
| description |
This image from the High Resolution Imaging Science Experiment on NASA's Mars Reconnaissance Orbiter shows "Victoria crater," an impact crater at Meridiani Planum, near the equator of Mars. The crater is approximately 800 meters (half a mile) in diameter. It has a distinctive scalloped shape to its rim, caused by erosion and downhill movement of crater wall material. Layered sedimentary rocks are exposed along the inner wall of the crater, and boulders that have fallen from the crater wall are visible on the crater floor. The floor of the crater is occupied by a striking field of sand dunes. Since January 2004, the Mars Exploration Rover Opportunity has been operating at Meridiani Planum. Five days before this image was taken, Opportunity arrived at the rim of Victoria crater, after a drive of more than 9 kilometers (over 5 miles). The rover can be seen in this image, at roughly the "ten o'clock" position along the rim of the crater. This view is a portion of an image taken by the High Resolution Imaging Science Experiment (HiRISE) camera onboard the Mars Reconnaissance Orbiter spacecraft on Oct. 3, 2006. The complete image is centered at minus7.8 degrees latitude, 279.5 degrees East longitude. The range to the target site was 297 kilometers (185.6 miles). At this distance the image scale is 29.7 centimeters (12 inches) per pixel (with 1 x 1 binning) so objects about 89 centimeters (35 inches) across are resolved. The image shown here has been map-projected to 25 centimeters (10 inches) per pixel and north is up. The image was taken at a local Mars time of 3:30 PM and the scene is illuminated from the west with a solar incidence angle of 59.7 degrees, thus the sun was about 30.3 degrees above the horizon. At a solar longitude of 113.6 degrees, the season on Mars is northern summer. This is an enhanced-color view generated from images acquired by the HiRISE camera using its red filter and blue-green filter. Images from the High Resolution Imaging Science Experiment and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mroor http://HiRISE.lpl.arizona.edu. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov. JPL, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace & Technologies Corporation and is operated by the University of Arizona. Image Credit: NASA/JPL/UA |
|
Gullies with Characteristics
…
| title |
Gullies with Characteristics of Water-Carved Channels |
| description |
False-color image of gully channels in a crater in the southern highlands of Mars, taken by the High Resolution Imaging Science Experiment (HiRISE) camera on the Mars Reconnaissance Orbiter. The gullies emanating from the rocky cliffs near the crater's rim (upper left) show meandering and braided patterns typical of water-carved channels. North is approximately up and illumination is from the left, scale, 26 centimeters per pixel. A link to the full HiRISE image that includes this view is online at http://hirise.lpl.arizona.edu/PSP_003583_1425 Credit: NASA/JPL/University of Arizona |
|
Gullies in Sirenum Terra, Ma
…
| title |
Gullies in Sirenum Terra, Mars |
| date |
10.03.2006 |
| description |
This enhanced-color view shows gullies in an unnamed crater in the Terra Sirenum region of Mars. It is a sub-image from a larger view imaged by the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter on Oct. 3, 2006. This scene is about 254 meters (about 830 feet) wide. The upper and left regions of this scene are in shadow, yet color variations are still apparent. The high signal to noise ratio of the HiRISE camera allows for colors to be distinguished in shadows. This allows dark features to be identified as true albedo features versus topographical features. Image credit: NASA/JPL/Univ. of Arizona |
|
Full-Frame Reference for Tes
…
| title |
Full-Frame Reference for Test Photo of Moon |
| Description |
This pair of views shows how little of the full image frame was taken up by the Moon in test images taken Sept. 8, 2005, by the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter. The Mars-bound camera imaged Earth's Moon from a distance of about 10 million kilometers (6 million miles) away -- 26 times the distance between Earth and the Moon -- as part of an activity to test and calibrate the camera. The images are very significant because they show that the Mars Reconnaissance Orbiter spacecraft and this camera can properly operate together to collect very high-resolution images of Mars. The target must move through the camera's telescope view in just the right direction and speed to acquire a proper image. The day's test images also demonstrate that the focus mechanism works properly with the telescope to produce sharp images. Out of the 20,000-pixel-by-6,000-pixel full frame, the Moon's diameter is about 340 pixels, if the full Moon could be seen. The illuminated crescent is about 60 pixels wide, and the resolution is about 10 kilometers (6 miles) per pixel. At Mars, the entire image region will be filled with high-resolution information. The Mars Reconnaissance Orbiter, launched on Aug. 12, 2005, is on course to reach Mars on March 10, 2006. After gradually adjusting the shape of its orbit for half a year, it will begin its primary science phase in November 2006. From the mission's planned science orbit about 300 kilometers (186 miles) above the surface of Mars, the high resolution camera will be able to discern features as small as one meter or yard across. The Mars Reconnaissance Orbiter mission is managed by NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena, for the NASA Science Mission Directorate. Lockheed Martin Space Systems, Denver, prime contractor for the project, built the spacecraft. Ball Aerospace & Technologies Corp., Boulder, Colo., built the High Resolution Imaging Science Experiment instrument for the University of Arizona, Tucson, to provide to the mission. The HiRISE Operations Center at the University of Arizona processes images from the camera. Credit: NASA/JPL/University of Arizona |
|
New Mars Camera's First Imag
…
| title |
New Mars Camera's First Image of Mars from Mapping Orbit |
| Description |
The high resolution camera on NASA's Mars Reconnaissance Orbiter captured its first image of Mars in the mapping orbit, demonstrating the full resolution capability, on Sept. 29, 2006. The High Resolution Imaging Science Experiment (HiRISE) acquired this image at 8:16 AM (Pacific Time), and parts of the image became available to the HiRISE team at 1:30 PM. With the spacecraft at an altitude of 280 kilometers (174 miles), the image scale is 29.7 centimeters per pixel (about 12 inches per pixel). This sub-image covers a small portion of the floor of Ius Chasma, one branch of the giant Valles Marineris system of canyons. The image illustrates a variety of processes that have shaped the Martian surface. There are bedrock exposures of layered materials, which could be sedimentary rocks deposited in water or from the air. Some of the bedrock has been faulted and folded, perhaps the result of large-scale forces in the crust or from a giant landslide. The darker unit of material at right includes many rocks. The image resolves rocks as small as small as 90 centimeters (3 feet) in diameter. At bottom right are a few dunes or ridges of windblown sand. If a person was located on this part of Mars, he or she would just barely be visible in this image. Image TRA_000823_1720 was taken by the High Resolution Imaging Science Experiment (HiRISE) camera onboard the Mars Reconnaissance Orbiter spacecraft on September 29, 2006. Shown here is a small portion of the full image. The full image is centered at minus 7.8 degrees latitude, 279.5 degrees East longitude. The image is oriented such that north is to the top. The range to the target site was 297 kilometers (185.6 miles). At this distance the image scale is 29.7 centimeters per pixel (with one-by-one binning) so objects about 89 centimeters (35 inches) across are resolved. The image was taken at a local Mars time of 3:30 PM and the scene is illuminated from the west with a solar incidence angle of 59.7 degrees, thus the sun was about 30.3 degrees above the horizon. At an LsubS of 113.6 degrees, the season on Mars is Northern Summer / Southern Winter. Images from the High Resolution Imaging Science Experiment and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov [ http://www.nasa.gov ]. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace Corporation and is operated by the University of Arizona. Credit: NASA/JPL/UA |
|
Landscape West of Bosporos R
…
| title |
Landscape West of Bosporos Rupes |
| Description |
This image was taken in the mid-latitudes of Mars' southern hemisphere near the giant Argyre impact basin. It is located just to the west of a prominent scarp known as Bosporos Rupes. The left side of the image shows cratered plains. Some of the craters are heavily mantled and indistinct, whereas others exhibit sharp rims and dramatic topography. The largest crater in this half of the image is about 2.5 kilometers (1.5 miles) wide. Mounds and ridges, which may be remnants of an ice-rich deposit, are visible on its floor. Three sinuous valleys occupy the center of the image. Valleys such as these were first observed in data returned by the NASA Mariner 9 spacecraft, which reached Mars in 1971. The right side of the image shows part of an impact crater that is approximately 20 kilometers (12 miles) in diameter. The furrowed appearance of the crater's inner wall suggests that it has been extensively modified, perhaps by landslides and flowing water. Like other craters in the area, the floor of this crater has a rough and dissected texture that is often attributed to the loss of ice-rich material. Image AEB_000001_0050_Red was taken by the High Resolution Imaging Science Experiment (HiRISE) camera onboard NASA's Mars Reconnaissance Orbiter spacecraft on March 24, 2006. The image is centered at 40.64 degrees south latitude, 303.49 degrees east longitude. The image is oriented such that north is 7 degrees to the left of up. The range to the target was 2,044 kilometers (1,270 miles). At this distance the image scale is 2.04 meters (6.69 feet) per pixel, so objects as small as 6.1 meters (20 feet) are resolved. In total this image is 40.90 kilometers (25.41 miles) or 20,081 pixels wide and 11.22 kilometers (6.97 miles) or 5,523 pixels high. The image was taken at a local Mars time of 07:30 and the scene is illuminated from the upper right with a solar incidence angle of 81.4 degrees, thus the sun was about 8.6 degrees above the horizon. At an Ls of 29 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the High Resolution Imaging Science Experiment and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov [ http://www.nasa.gov ]. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona |
|
North Polar Layered Deposits
…
| title |
North Polar Layered Deposits in Summer |
| Description |
The High Resolution Imaging Science Experiment (HiRISE) on NASA's Mars Reconnaissance Orbiter acquired this image during its first day of test imaging from the spacecraft's low-altitude mapping orbit, Sept. 29, 2006. This image of Mars' north polar layered deposits was taken during the summer season (solar longitude of 113.6 degrees), when carbon dioxide frost had evaporated from the surface. The bright spots seen here are most likely patches of water frost, but the location of the frost patches does not appear to controlled by topography. Layers are visible at the bottom of the image, mostly due to difference in slope between them. The variations in slope are probably caused by differences in the physical properties of the layers. Thinner layers that have previously been observed in these deposits are visible, and may represent annual deposition of water ice and dust that is thought to form the polar layered deposits. These deposits are thought to record global climate variations on Mars, similar to ice ages on Earth. HiRISE images such as this should allow Mars' climate record to be inferred and compared with climate changes on Earth. Image TRA_000825_2665 was taken by the High Resolution Imaging Science Experiment (HiRISE) camera onboard the Mars Reconnaissance Orbiter spacecraft on September 29, 2006. Shown here is the full image, centered at 86.5 degree latitude, 172.0 degrees east longitude. The image is oriented such that north is to the top. The range to the target site was 298.9 kilometers (186.8 miles). At this distance the image scale is 59.8 centimeters (23.5 inches) per pixel (with two-by-two binning} so objects about 1.79 meters (70 inches) across are resolved. In total the original image was 12.2 kilometers 7.58 mile, 10024 pixels) wide and 6.1 kilometers (3.79 miles, 5000 pixels) long. The image was taken at a local Mars time of 3:30 PM and the scene is illuminated from the southwest with a solar incidence angle of 63.5 degrees, thus the sun was about 26.5 degrees above the horizon. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace Corporation and is operated by the University of Arizona. Credit: NASA/JPL/UA |
|
Landscape Northeast of Halle
…
| title |
Landscape Northeast of Halley Crater |
| Description |
. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona, This image shows a landscape west of Mars' Argyre impact basin and northeast of Halley Crater. The large but faint circular feature near the center of the image is an unnamed impact crater about 7.5 kilometers (4.7 miles) in diameter. It has been all but erased by geological (and probably ice-related) processes. In fact, the majority of impact craters in this image have been modified from their original shapes, some undoubtedly beyond recognition. Only a few small craters remain pristine. The most prevalent surface type in this image is rough, dissected terrain, which is characterized by a complex pattern of knobs, pits, ridges and valleys. In places the rough terrain has been covered by a younger material that appears flat, smooth and nearly featureless. The smooth material may have been emplaced as muddy or icy debris. It filled low-lying areas (most notably craters) and surrounded higher features, preserving islands of rough terrain. Wind-formed dunes have formed atop some of the smooth material, and diagonal streaks on the right side of the image may be due to the winds. Images such as this show the importance of water (liquid and/or ice), wind, and impacts in shaping the surface of Mars. Image AEB_000001_0100_Red was taken by the High Resolution Imaging Science Experiment (HiRISE) camera onboard NASA's Mars Reconnaissance Orbiter spacecraft on March 24, 2006. The image is centered at 47.14 degrees south latitude, 302.00 degrees east longitude. It is oriented such that north is 7 degrees to the left of up. The range to the target was 1,699 kilometers (1,056 miles). At this distance the image scale is 1.70 meter (5.58 feet) per pixel in the center portion of the image, so objects as small as 5.1 meter (16.7 feet) are resolved. In the side regions the pixels were binned 2x2 to a scale of 3.4 meters (11.2 feet) per pixel. The camera has a total of 10 red-bandpass CCD detectors, and in this image the first 4 CCDs on the left and the last 3 on the right were binned 2x2, while 3 in the middle returned data at full resolution. In total this image is 34.08 kilometers (21.18 miles) or 20,081 pixels wide and 8.50 kilometers (5.28 miles) or 5,164 pixels high. The image was taken at a local Mars time of 07:27 and the scene is illuminated from the upper right with a solar incidence angle of 84.5 degrees, thus the sun was about 5.5 degrees above the horizon. At an Ls of 29 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the High Resolution Imaging Science Experiment and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov [ http://www.nasa.gov ] |
|
Perspective Views of HiRISE
…
| title |
Perspective Views of HiRISE First Image |
| Description |
This perspective view generated from digital topography provides an overview of the Mars terrain covered in the first color image of Mars from the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter. It has a field of view 55 degrees wide, and no vertical exaggeration. The overview illustrates how the ridge has deformed several valleys and impact craters. The image is a subset of the first HiRISE image from Mars [ http://photojournal.jpl.nasa.gov/catalog/PIA08014 ], which was taken on March 24, 2006. The image was taken at a local Mars time of 07:33 and the scene is illuminated from the upper right with a solar incidence angle of 78.1 degrees, thus the sun was about 11.9 degrees above the horizon. At an Ls of 29 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the HiRISE and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov [ http://www.nasa.gov ]. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona/USGS |
|
Perspective Views of HiRISE
…
| title |
Perspective Views of HiRISE First Image |
| Description |
This perspective view generated from digital topography provides an overview of a portion of the Mars terrain covered in the first color image of Mars from the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter. It has a field of view 55 degrees wide, and no vertical exaggeration. The overview illustrates how the ridge has deformed several valleys and impact craters. The image is a subset of the first HiRISE image from Mars [ http://photojournal.jpl.nasa.gov/catalog/PIA08014 ], which was taken on March 24, 2006. The image was taken at a local Mars time of 07:33 and the scene is illuminated from the upper right with a solar incidence angle of 78.1 degrees, thus the sun was about 11.9 degrees above the horizon. At an Ls of 29 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the HiRISE and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov [ http://www.nasa.gov ]. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona/USGS |
|
Perspective Views of HiRISE
…
| title |
Perspective Views of HiRISE First Image |
| Description |
This perspective view generated from digital topography provides an overview of a portion of the Mars terrain covered in the first color image of Mars from the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter. It has a field of view 55 degrees wide, and no vertical exaggeration. The overview illustrates how the ridge has deformed several valleys and impact craters. The image is a subset of the first HiRISE image from Mars [ http://photojournal.jpl.nasa.gov/catalog/PIA08014 ], which was taken on March 24, 2006. The image was taken at a local Mars time of 07:33 and the scene is illuminated from the upper right with a solar incidence angle of 78.1 degrees, thus the sun was about 11.9 degrees above the horizon. At an Ls of 29 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the HiRISE and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov [ http://www.nasa.gov ]. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona/USGS |
|
Sample of the Argyre Impact
…
| title |
Sample of the Argyre Impact Basin Rim |
| Description |
http://www.nasa.gov [ http://www.nasa.gov ]. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona, This image shows part of a low mountain belt that rings the Argyre impact basin in Mars' southern hemisphere. The mountains or hills seen here are located in the northwestern part of the Charitum Montes. Taken just minutes after the sun had risen over the horizon, only the sun-facing slopes are well illuminated and much of the scene is in shadow, but the camera has nevertheless captured many details of the surface that are only dimly illuminated. There are terrains that are both smooth and rough at this scale (2.94 meters or 9.65 feet per pixel). The rough terrain is littered with blocks roughly 10 meters (30 feet) across, and the smooth material has a uniform appearance broken by subtle, undulating ridges. The rough terrains usually occur at relatively high elevations, and smooth material occupies the lowest areas. In some locations it is evident that boulders from the rough terrain have tumbled downhill onto the smooth material. The smooth material is younger than the rough terrain, and some of it may have formed when water-rich or ice-rich debris flooded low-lying areas. In other areas the smooth material mantles the topography like deposits of airborne dust. Further upslope, the mountain flanks have a variety of rough textures. In places the terrain has been eroded into streamlined forms and striations, suggestive of glacial erosion. Gullies formed in one spot near bottom center. Perhaps the most striking aspect of this image is the dearth of fresh impact craters. The Argyre basin is thought to be billions of years old, but much more recent processes have greatly modified the surface. Image AEB_000001_0150_Red was taken by the High Resolution Imaging Science Experiment (HiRISE) camera onboard NASA's Mars Reconnaissance Orbiter spacecraft on March 24, 2006. The image is centered at 52.20 degrees south latitude, 300.75 degrees east longitude. It is oriented such that north is 7 degrees to the left of up. The range to the target was 1,470 kilometers (913 miles). With 2x2 pixel binning, the scale of the image is 2.94 meters (9.65 feet) per pixel, so objects as small as 8.82 meters (28.94 feet) are resolved. In total this image is 29.47 kilometers (18.31 miles) or 10,040 pixels wide and 76.44 kilometers (47.50 miles) or 26,011 pixels long. The image was taken at a local Mars time of 07:24 and the scene is illuminated from the upper right with a solar incidence angle of 87.1 degrees, thus the sun was about 2.9 degrees above the horizon. At an Ls of 29 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the High Resolution Imaging Science Experiment and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: |
|
First HiRISE Image of Mars:
…
| title |
First HiRISE Image of Mars: Topographic Model from Photoclinometry |
| Description |
http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov [ http://www.nasa.gov ]. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona/USGS, This is a topographic map of part of the area covered by the first image of Mars obtained by the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter spacecraft. The image was processed at the U.S. Geological Survey, Flagstaff, by a technique called photoclinometry (or, more descriptively, "shape-from-shading"). This method allows elevations to be reconstructed from a single image by noting how surfaces sloping toward the sun appear brighter than areas that slope away from it. This image is almost ideal for such interpretation because the low sun angle reveals even subtle slopes with dramatic contrast, and variations in the brightness of surface materials (which could be confused with slopes) are minimal. At left is the region of the image that was analyzed, tinted to approximate the visual appearance of the Martian surface. This region is a square 20.4 kilometers (12.7 miles) wide (8,192 pixels by 8,192 pixels at a scale of 2.49 meters or 8.17 feet per pixel). At right is a color-coded topographic contour map of the same area. The total range of elevations is 1.6 kilometers (1 mile), with low areas shown in purple and high areas in red. Contours mark each 20-meter (66-foot) change in elevation. Photoclinometry gives relative rather than absolute heights, but the overall height and shape of features in this map, such as the ridge Ogygis Rupes in the center, agree reasonably well with results from the Mars Orbiter Laser Altimeter on NASA's Mars Odyssey spacecraft, an instrument with high absolute accuracy but relatively low spatial resolution. The real value of mapping by photoclinometry, however, is that it reveals the details of the smallest topographic features resolved by the image. In this example, the image was resampled by a factor of 2 before processing, so the topographic map has a scale of 5 meters (16 feet) per pixel and resolves features as small as 15 meters (49 feet). Computer-generated three-dimensional close-ups of the surface provide one way to visualize these small but important clues to Martian geologic history. This illustration shows a subset of AEB_000001_0000_Red, which was taken by the HiRISE camera on March 24, 2006. The image is oriented such that north is 7 degrees to the left of up. The range to the target was 2,493 kilometers (1,549 miles). At this distance the image scale is 2.49 meters (8.17 feet) per pixel, so objects as small as 7.5 meters (24.6 feet) are resolved. The image was taken at a local Mars time of 07:33 and the scene is illuminated from the upper right with a solar incidence angle of 78.1 degrees, thus the sun was about 11.9 degrees above the horizon. At an Ls of 29 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the High Resolution Imaging Science Experiment and additional information about the Mars Reconnaissance Orbiter are available online at: |
|
First HiRISE image of Mars
| title |
First HiRISE image of Mars |
| Description |
. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona, The first image of Mars by the High Resolution Imaging Science Experiment (HiRISE) on NASA's Mars Reconnaissance Orbiter shows a story of geologic change in the eastern Bosporos Planum region. Old stream valleys cut into the flanks of a gently sloping mountain range in the center of the image. Layers of smooth-textured deposits have mantled the stream valleys and many impact craters. Wind and sublimation of water or carbon dioxide ice have partially eroded patches of the smooth-textured deposits, leaving behind areas of layered and hummocky terrain. A prominent ridge that extends from the top to the bottom of the image dominates the scene. This ridge formed above a thrust fault, a type of fault that occurs when the surface of a planet is compressed. On planetary surfaces, such fault-related ridges are termed "wrinkle ridges." They are commonly observed on Mars, as well as on Earth's moon and on Venus and Mercury. The wrinkle ridge imaged here is named Ogygis Rupes. This wrinkle ridge has deformed several valleys and impact craters. Throughout the scene, geologically young sand dunes are present within stream valleys and some impact craters. The area is also sprinkled with many small young impact craters, which are distinguished by sharp crater rims and bright or dark halos of ejected material. This image demonstrates how a single HiRISE image can capture a multitude of geologic processes. Image AEB_000001_0000_Red was taken by HiRISE on March 24, 2006. The image is centered at 33.65 degrees south latitude, 305.07 degrees east longitude. It is oriented such that north is 7 degrees to the left of up. The range to the target was 2,493 kilometers (1,549 miles). At this distance the image scale is 2.49 meters (8.17 feet) per pixel, so objects as small as 7.5 meters (24.6 feet) are resolved. In total this image is 49.92 kilometers (31.02 miles) or 20,081 pixels wide and 23.66 kilometers (14.70 miles) or 9,523 pixels long. The image was taken at a local Mars time of 07:33 and the scene is illuminated from the upper right with a solar incidence angle of 78 degrees, thus the sun was 12 degrees above the horizon. At an Ls of 29 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the High Resolution Imaging Science Experiment and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov [ http://www.nasa.gov ] |
|
Perspective Views of HiRISE
…
| title |
Perspective Views of HiRISE First Image |
| Description |
This perspective view generated from digital topography provides an overview of a portion of the Mars terrain covered in the first color image of Mars from the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter. It has a field of view 55 degrees wide, and no vertical exaggeration. The overview illustrates how the ridge has deformed several valleys and impact craters. The image is a subset of the first HiRISE image from Mars [ http://photojournal.jpl.nasa.gov/catalog/PIA08014 ], which was taken on March 24, 2006. The image was taken at a local Mars time of 07:33 and the scene is illuminated from the upper right with a solar incidence angle of 78.1 degrees, thus the sun was about 11.9 degrees above the horizon. At an Ls of 29 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the HiRISE and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov [ http://www.nasa.gov ]. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona/USGS |
|
A Myriad of Geologic Process
…
| title |
A Myriad of Geologic Processes in Terra Cimmeria |
| Description |
This scene in a region of Mars named Terra Cimmeria shows a variety of ancient and recent geologic processes. In the upper portion of the image, a twisting ridge of raised ground may outline the location of a subsurface thrust fault. This type of fault results in the compression and crumpling of a planet's surface. This crumpling of the planet's surface has squeezed two originally circular craters on the ridge into oval-shaped craters. Valleys are also present throughout the image, suggesting that water flowed across this area a long time ago. Many valleys and craters in the image are now filled by deposits of dust or debris. This debris mantle is common over the middle latitudes of Mars and is a geologically recent deposit. Image AEB_000002_0050_Red was taken by the High Resolution Imaging Science Experiment (HiRISE) camera onboard NASA's Mars Reconnaissance Orbiter spacecraft on March 25, 2006. The image is centered at 40.64 degrees south latitude, 144.39 degrees east longitude. It is oriented such that north is 7 degrees to the left of up. The range to the target was 2,038 kilometers (1,266 miles). At this distance the image scale is 2.04 meters (6.69 feet) per pixel, so objects as small as 6.1 meters (20 feet) are resolved. In total this image is 12.34 kilometers (7.67 miles) or 6,045 pixels wide and 34.68 kilometers (21.55 miles) or 17,003 pixels long. The image was taken at a local Mars time of 07:28 and the scene is illuminated from the upper right with a solar incidence angle of 82.0 degrees, thus the sun was about 8.0 degrees above the horizon. At an Ls of 30 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the High Resolution Imaging Science Experiment and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov [ http://www.nasa.gov ]. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona |
|
Twilight Imaging of Kepler C
…
| title |
Twilight Imaging of Kepler Crater Floor |
| Description |
This image of the floor of Kepler crater in early morning twilight highlights the quality of images from the High Resolution Imaging Science Experiment (HiRISE) camera even under extremely minimal lighting conditions. At the time that this image was acquired, the sun had just barely risen over the horizon. This faint illumination reveals a terrain dotted by numerous exhumed impact craters. These impact craters once dominated the landscape of this region until they were buried under a blanket of soil. Subsequent wind action and perhaps sublimation of subsurface water and carbon-dioxide ice has etched pits and grooves into the blanket of soil, revealing the older impact craters below. These exhumed impact craters can be recognized as circular depressions or plateaus. Also present in this scene are multitudes of dunes that have formed as sand has blown across the terrain. Dunes have accumulated in depressions, such as the pits and grooves associated with the exhumed impact craters, as well as on the floors of some of the larger craters. Image AEB_000002_0100_Red was taken by HiRISE camera onboard NASA's Mars Reconnaissance Orbiter spacecraft on March 25, 2006. The image is centered at 47.14 degrees south latitude, 142.90 degrees east longitude. It is oriented such that north is 7 degrees to the left of up. The range to the target was 1,694 kilometers (1,053 miles). Because the image was acquired by mixing the resolution levels of HiRISE detectors, the scale of the image is 6.76 meters (22.18 feet) per pixel, so objects as small as 27.04 meters (88.71 feet) are resolved. In total this image is 33.88 kilometers (21.05 miles) or 5,017 pixels wide and 37.18 kilometers (23.10 miles) or 5,636 pixels long. The image was taken at a local Mars time of 07:25 and the scene is illuminated from the upper right with a solar incidence angle of 85.1 degrees, thus the sun was about 4.9 degrees above the horizon. At an Ls of 30 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the High Resolution Imaging Science Experiment and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov [ http://www.nasa.gov ]. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona |
|
Sample of Mid-latitude South
…
| title |
Sample of Mid-latitude Southern Highlands |
| Description |
http://www.nasa.gov [ http://www.nasa.gov ]. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona, This image shows terrain northeast of Martz Crater in the southern highlands of Mars. It is a landscape dominated by impact craters, scarps and ridges. The plethora of craters and the overprinting of younger craters on older craters indicate that this is an ancient surface. Curvilinear ridges called "wrinkle ridges" are common landforms on Mars. They form when layers of rock and sediment break and fold under compression. Multiple wrinkle ridges are captured in this image, the most prominent of which is a curving structure oriented approximately north-south. A 2.8-kilometer-wide (1.7-mile-wide) impact crater is superimposed on this north-south wrinkle ridge. Gullies, perhaps carved by water or muddy debris, are visible inside this crater. They are partly in shadow, but can be shown clearly by adjusting the contrast of the full-resolution image. Several of the smaller craters in this image contain dune fields, which attest to the presence of wind-blown sediments. In the lower portion of the image a few cliffs or scarps can be seen. While their origin is uncertain, they may have formed by some combination of flowing water and mass wasting. If one looks carefully at this image, it is possible to find horizontal blurred zones about 100 pixels tall. During these times the spacecraft was executing a test of how much the motion of another instrument would shake the spacecraft. These blurred regions also introduce geometric distortions, so the match between the three CCD images utilized for this observation is sometimes poor. The MRO spacecraft includes a high-stability mode that should minimize these problems. Image AEB_000002_0000_Red was taken by the High Resolution Imaging Science Experiment (HiRISE) camera onboard NASA's Mars Reconnaissance Orbiter spacecraft on March 25, 2006. The image is centered at 33.66 degrees south latitude, 145.97 degrees east longitude. It is oriented such that north is 7 degrees to the left of up. The range to the target was 2,485 kilometers (1,544 miles). At this distance the image scale is 2.49 meters (8.17 feet) per pixel, so objects as small as 7.5 meters (24.6 feet) are resolved. In total this image is 15.01 kilometers (9.33 miles) or 6,045 pixels wide and 57.27 kilometers (35.59 miles) or 23,024 pixels long. The image was taken at a local Mars time of 07:30 and the scene is illuminated from the upper right with a solar incidence angle of 78.7 degrees, thus the sun was about 11.3 degrees above the horizon. At an Ls of 30 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the High Resolution Imaging Science Experiment and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: |
|
Perspective Views of HiRISE
…
| title |
Perspective Views of HiRISE First Image |
| Description |
This perspective view generated from digital topography provides an overview of the Mars terrain covered in the first color image of Mars from the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter. It has a field of view 55 degrees wide, and no vertical exaggeration. The overview illustrates how the ridge has deformed several valleys and impact craters. The image is a subset of the first HiRISE image from Mars [ http://photojournal.jpl.nasa.gov/catalog/PIA08014 ], which was taken on March 24, 2006. The image was taken at a local Mars time of 07:33 and the scene is illuminated from the upper right with a solar incidence angle of 78.1 degrees, thus the sun was about 11.9 degrees above the horizon. At an Ls of 29 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the HiRISE and additional information about the Mars Reconnaissance Orbiter are available online at: http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov [ http://www.nasa.gov ]. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona/USGS |
|
Ares Vallis Cataract
PIA09683
Sol (our sun)
HiRISE
| Title |
Ares Vallis Cataract |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003538_1885 [ http://hirise.lpl.arizona.edu/PSP_003538_1885 ]) shows a dry cataract within Ares Vallis. A cataract is a large waterfall where there is a high, steep drop. The presence of this large cataract in Ares Vallis confirms that this channel was carved by water, probably in one or many large catastrophic flooding events. This feature has many of the same characteristics as the cataracts on Earth associated with the flood that carved the Channelled Scablands in Washington state, including horseshoe-shaped headcuts and longitudinal grooves. These grooves in the lower portion of the image lead up to the cataract, with the water flowing from the south to the north in this image. It then flowed down the cataract into the smaller incised channel. The horseshoe-shaped headcut here is only part of a larger cataract system, and probably formed during the last stage of flooding. The inner channels are now filled with dunes formed by wind blowing along the channel floor. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:28 PMDegrees latitude (centered): 8.4° Degrees longitude (East): 335.6° Range to target site: 276.0 km (172.5 miles) Original image scale range: 27.6 cm/pixel (with 1 x 1 binning) so objects ~83 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 1.3° Phase angle: 56.9° Solar incidence angle: 58°, with the Sun about 32° above the horizon Solar longitude: 228.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Ares Vallis Cataract
PIA09683
Sol (our sun)
HiRISE
| Title |
Ares Vallis Cataract |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003538_1885 [ http://hirise.lpl.arizona.edu/PSP_003538_1885 ]) shows a dry cataract within Ares Vallis. A cataract is a large waterfall where there is a high, steep drop. The presence of this large cataract in Ares Vallis confirms that this channel was carved by water, probably in one or many large catastrophic flooding events. This feature has many of the same characteristics as the cataracts on Earth associated with the flood that carved the Channelled Scablands in Washington state, including horseshoe-shaped headcuts and longitudinal grooves. These grooves in the lower portion of the image lead up to the cataract, with the water flowing from the south to the north in this image. It then flowed down the cataract into the smaller incised channel. The horseshoe-shaped headcut here is only part of a larger cataract system, and probably formed during the last stage of flooding. The inner channels are now filled with dunes formed by wind blowing along the channel floor. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:28 PMDegrees latitude (centered): 8.4° Degrees longitude (East): 335.6° Range to target site: 276.0 km (172.5 miles) Original image scale range: 27.6 cm/pixel (with 1 x 1 binning) so objects ~83 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 1.3° Phase angle: 56.9° Solar incidence angle: 58°, with the Sun about 32° above the horizon Solar longitude: 228.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Slope Streak South of Olympu
…
PIA09685
Sol (our sun)
HiRISE
| Title |
Slope Streak South of Olympus Mons |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003239_1870 [ http://hirise.lpl.arizona.edu/PSP_003239_1870 ]) reveals slope streaks in an area south of Olympus Mons in the northern hemisphere of Mars. These features are found along the slopes of impact craters, buttes, knobs, ridges, and troughs on Mars. Streaks generally start at a point source and widen downslope, traveling over and sometimes around various obstacles. The subimage [ http://photojournal.jpl.nasa.gov/figures/PIA09685_fig2.jpg ], shows a very wide dark slope that has developed small fingers at its terminus. The dark slope streak does not appear to have relief and does not disturb the pre-existing surface leaving the underlying topography intact beneath its dark trail. This can be seen particularly well near the streak termination. There are also no observable deposits of displaced materials along the terminus. Surrounding the dark slope streak are multiple ~1 meter deep, triangular faceted scars left behind from avalanched slope materials. The high standing remnant surfaces on either side of the lower scarred surface are clearly visible. Avalanche scars are sometimes found in areas where slope streaks have formed but they are believed to be unrelated. The trail of the dark slope streak appears to cross over the avalanche scars suggesting that the slope streak formed more recently. Slope streak formation is among the few known processes currently active on Mars. While their mechanism of formation and triggering is debated, they are most commonly believed to form by downslope movement of extremely dry sand or very fine-grained dust in an almost fluidlike manner (analogous to a terrestrial snow avalanche) exposing darker underlying material. Other ideas include the triggering of slope streak formation by possible concentrations of near-surface ice or scouring of the surface by running water from aquifers intercepting slope faces, briny liquid flows, dry granular flow, mixed water-dust flows, and/or hydrothermal activity. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:35 PM Degrees latitude (centered): 7.1° Degrees longitude (East): 218.2° Range to target site: 274.5 km (171.6 miles) Original image scale range: 54.9 cm/pixel (with 2 x 2 binning) so objects ~165 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 4.2° Phase angle: 61.3° Solar incidence angle: 57°, with the Sun about 33° above the horizon Solar longitude: 213.6°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Slope Streak South of Olympu
…
PIA09685
Sol (our sun)
HiRISE
| Title |
Slope Streak South of Olympus Mons |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003239_1870 [ http://hirise.lpl.arizona.edu/PSP_003239_1870 ]) reveals slope streaks in an area south of Olympus Mons in the northern hemisphere of Mars. These features are found along the slopes of impact craters, buttes, knobs, ridges, and troughs on Mars. Streaks generally start at a point source and widen downslope, traveling over and sometimes around various obstacles. The subimage [ http://photojournal.jpl.nasa.gov/figures/PIA09685_fig2.jpg ], shows a very wide dark slope that has developed small fingers at its terminus. The dark slope streak does not appear to have relief and does not disturb the pre-existing surface leaving the underlying topography intact beneath its dark trail. This can be seen particularly well near the streak termination. There are also no observable deposits of displaced materials along the terminus. Surrounding the dark slope streak are multiple ~1 meter deep, triangular faceted scars left behind from avalanched slope materials. The high standing remnant surfaces on either side of the lower scarred surface are clearly visible. Avalanche scars are sometimes found in areas where slope streaks have formed but they are believed to be unrelated. The trail of the dark slope streak appears to cross over the avalanche scars suggesting that the slope streak formed more recently. Slope streak formation is among the few known processes currently active on Mars. While their mechanism of formation and triggering is debated, they are most commonly believed to form by downslope movement of extremely dry sand or very fine-grained dust in an almost fluidlike manner (analogous to a terrestrial snow avalanche) exposing darker underlying material. Other ideas include the triggering of slope streak formation by possible concentrations of near-surface ice or scouring of the surface by running water from aquifers intercepting slope faces, briny liquid flows, dry granular flow, mixed water-dust flows, and/or hydrothermal activity. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:35 PM Degrees latitude (centered): 7.1° Degrees longitude (East): 218.2° Range to target site: 274.5 km (171.6 miles) Original image scale range: 54.9 cm/pixel (with 2 x 2 binning) so objects ~165 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 4.2° Phase angle: 61.3° Solar incidence angle: 57°, with the Sun about 33° above the horizon Solar longitude: 213.6°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Faults and Folds in Western
…
PIA09682
Sol (our sun)
HiRISE
| Title |
Faults and Folds in Western Candor Chasma |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003540_1735 [ http://hirise.lpl.arizona.edu/PSP_003540_1735 ]) shows various interesting structures along the floor of Candor Chasma, a major canyon of Valles Marineris. The rocks along the floor of the chasma consist of multiple layers of light-toned material, possibly windblown or water-lain sediment. These layers have been shifted along faults and also folded, giving the layers an apparent wavy appearance as they are exposed at the surface through erosion. Some waviness in the layers may also have formed as these sediments were laid down, for example, in dunes or large ripples. Detailed mapping of these faults and folds may help reveal the origin of these layered deposits and if water played any role in their formation. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:33 PM Degrees latitude (centered): -6.4° Degrees longitude (East): 283.2° Range to target site: 263.6 km (164.7 miles) Original image scale range: 26.4 cm/pixel (with 1 x 1 binning) so objects ~79 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.3° Phase angle: 46.0° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 228.2°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Faults and Folds in Western
…
PIA09682
Sol (our sun)
HiRISE
| Title |
Faults and Folds in Western Candor Chasma |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003540_1735 [ http://hirise.lpl.arizona.edu/PSP_003540_1735 ]) shows various interesting structures along the floor of Candor Chasma, a major canyon of Valles Marineris. The rocks along the floor of the chasma consist of multiple layers of light-toned material, possibly windblown or water-lain sediment. These layers have been shifted along faults and also folded, giving the layers an apparent wavy appearance as they are exposed at the surface through erosion. Some waviness in the layers may also have formed as these sediments were laid down, for example, in dunes or large ripples. Detailed mapping of these faults and folds may help reveal the origin of these layered deposits and if water played any role in their formation. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:33 PM Degrees latitude (centered): -6.4° Degrees longitude (East): 283.2° Range to target site: 263.6 km (164.7 miles) Original image scale range: 26.4 cm/pixel (with 1 x 1 binning) so objects ~79 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.3° Phase angle: 46.0° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 228.2°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Layers in Galle Crater
PIA09686
Sol (our sun)
HiRISE
| Title |
Layers in Galle Crater |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image shows part of a large mass of layered rock in Galle Crater, in the southern cratered highlands of Mars. At low resolution, layers appear as bands and swirls which are nearly horizontal. This causes them to interact dramatically with topography, producing the appearance of folds and loops wrapping around small hills much like lines on a contour map. Zooming in at higher resolution, some long cracks (hundreds of meters long) are cutting across the layers, generally trending northeast-southwest. At full resolution (PSP_002655_1280 [ http://hirise.lpl.arizona.edu/PSP_002655_1280 ]), details of the layers are often obscured by ripples of wind-blown dust or textured patterns of erosion now eroding the rock. In the best exposures, such as that in the cutout section, the layers are fractured into blocks. Some of the layers are relatively resistant, and appear as ridges or fins in the cutout, often with little material supporting them from below. Although this seems to indicate relatively strong, coherent material, few boulders are visible. The ridge-forming layers may be weak, but separated by material with virtually no cohesion. Polygonal fracture patterns in the dark regolith between distinct layers could be due to ground ice, or regional tectonic stresses. Observation Toolbox Acquisition date: 2 February 2007 Local Mars time: 3:54 PM Degrees latitude (centered): -51.8° Degrees longitude (East): 330.0° Range to target site: 256.3 km (160.2 miles) Original image scale range: 25.6 cm/pixel (with 1 x 1 binning) so objects ~77 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 2.8° Phase angle: 71.5° Solar incidence angle: 69°, with the Sun about 21° above the horizon Solar longitude: 186.6°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Layers in Galle Crater
PIA09686
Sol (our sun)
HiRISE
| Title |
Layers in Galle Crater |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image shows part of a large mass of layered rock in Galle Crater, in the southern cratered highlands of Mars. At low resolution, layers appear as bands and swirls which are nearly horizontal. This causes them to interact dramatically with topography, producing the appearance of folds and loops wrapping around small hills much like lines on a contour map. Zooming in at higher resolution, some long cracks (hundreds of meters long) are cutting across the layers, generally trending northeast-southwest. At full resolution (PSP_002655_1280 [ http://hirise.lpl.arizona.edu/PSP_002655_1280 ]), details of the layers are often obscured by ripples of wind-blown dust or textured patterns of erosion now eroding the rock. In the best exposures, such as that in the cutout section, the layers are fractured into blocks. Some of the layers are relatively resistant, and appear as ridges or fins in the cutout, often with little material supporting them from below. Although this seems to indicate relatively strong, coherent material, few boulders are visible. The ridge-forming layers may be weak, but separated by material with virtually no cohesion. Polygonal fracture patterns in the dark regolith between distinct layers could be due to ground ice, or regional tectonic stresses. Observation Toolbox Acquisition date: 2 February 2007 Local Mars time: 3:54 PM Degrees latitude (centered): -51.8° Degrees longitude (East): 330.0° Range to target site: 256.3 km (160.2 miles) Original image scale range: 25.6 cm/pixel (with 1 x 1 binning) so objects ~77 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 2.8° Phase angle: 71.5° Solar incidence angle: 69°, with the Sun about 21° above the horizon Solar longitude: 186.6°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Evros Vallis and Nearby Crat
…
PIA09684
Sol (our sun)
HiRISE
| Title |
Evros Vallis and Nearby Craters |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003273_1675 [ http://hirise.lpl.arizona.edu/PSP_003273_1675 ]) shows part of Evros Vallis, one of the Martian valley networks. These more ancient valley networks may have been eroded by flowing water during a warmer, wetter period of Martian history. Many dunes are visibile along the valley floor, as well as throughout the scene and in a partially exhumed crater on the valley wall. There are multiple generations and orientations of dunes. Dune orientation reflects the dominant or prevailing wind direction. Multiple dune orientations indicate that this region has experienced different wind regimes. An exhumed crater is one that likely formed a long time ago, was buried, and is now being re-exposed because the materials that originally covered it are being eroded away. The prominent crater on the valley wall as well as several other craters in this scene are thought to be partially exhumed. The subimage [ http://photojournal.jpl.nasa.gov/figures/PIA09684_fig2.jpg ] (approximately 300 m across) shows a couple groups of secondary craters. Secondary craters are craters that form when ejecta from the primary crater hits the surface with enough energy to form another smaller crater. As seen in the subimage, secondary craters often form in clusters spatially, because ejecta thrown out of the primary crater impacts the surface near each other at approximately the same time. Many potential secondary craters have have similar morphologies and have distinct, bright ejecta. This implies that these craters are relatively young and that their ejecta have yet to be covered by dust. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:41 PM Degrees latitude (centered): -12.6° Degrees longitude (East): 13.3° Range to target site: 264.3 km (165.2 miles) Original image scale range: 26.4 cm/pixel (with 1 x 1 binning) so objects ~79 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.6° Phase angle: 46.2° Solar incidence angle: 54°, with the Sun about 36° above the horizon Solar longitude: 215.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Evros Vallis and Nearby Crat
…
PIA09684
Sol (our sun)
HiRISE
| Title |
Evros Vallis and Nearby Craters |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003273_1675 [ http://hirise.lpl.arizona.edu/PSP_003273_1675 ]) shows part of Evros Vallis, one of the Martian valley networks. These more ancient valley networks may have been eroded by flowing water during a warmer, wetter period of Martian history. Many dunes are visibile along the valley floor, as well as throughout the scene and in a partially exhumed crater on the valley wall. There are multiple generations and orientations of dunes. Dune orientation reflects the dominant or prevailing wind direction. Multiple dune orientations indicate that this region has experienced different wind regimes. An exhumed crater is one that likely formed a long time ago, was buried, and is now being re-exposed because the materials that originally covered it are being eroded away. The prominent crater on the valley wall as well as several other craters in this scene are thought to be partially exhumed. The subimage [ http://photojournal.jpl.nasa.gov/figures/PIA09684_fig2.jpg ] (approximately 300 m across) shows a couple groups of secondary craters. Secondary craters are craters that form when ejecta from the primary crater hits the surface with enough energy to form another smaller crater. As seen in the subimage, secondary craters often form in clusters spatially, because ejecta thrown out of the primary crater impacts the surface near each other at approximately the same time. Many potential secondary craters have have similar morphologies and have distinct, bright ejecta. This implies that these craters are relatively young and that their ejecta have yet to be covered by dust. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:41 PM Degrees latitude (centered): -12.6° Degrees longitude (East): 13.3° Range to target site: 264.3 km (165.2 miles) Original image scale range: 26.4 cm/pixel (with 1 x 1 binning) so objects ~79 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.6° Phase angle: 46.2° Solar incidence angle: 54°, with the Sun about 36° above the horizon Solar longitude: 215.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Dark Slope Streak with Strea
…
PIA09681
Sol (our sun)
HiRISE
| Title |
Dark Slope Streak with Streak-Generated Topography |
| Original Caption Released with Image |
Click on image for larger version This is a portion of HiRISE image PSP_003542_2035 [ http://hirise.lpl.arizona.edu/PSP_003542_2035 ] which shows a dark slope streak north of Olympus Mons, in a region was covered by Mars Orbital Camera image R09/00701. (This portion is rotated with south up so that the direction the streak flowed is towards the bottom of the frame). This image shows that the slope streak forming process altered the pre-existing surface both by excavating material and depositing it. The fine scalloped texture of the surrounding surface is not present within the streak, and there are low linear mounds within the streak that are not seen outside. Their absence outside the streak indicates that the formation of the mounds resulted from the streak formation process. There is a large boulder or knob within the streak near the top of the frame which the dark slope streak appears to have flowed around, leaving a light-toned patch of the surrounding surface material intact downstream of the boulder. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:22 PM Degrees latitude (centered): 23.3° Degrees longitude (East): 223.7° Range to target site: 285.3 km (178.3 miles) Original image scale range: 28.5 cm/pixel (with 1 x 1 binning) so objects ~86 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.6° Phase angle: 71.6° Solar incidence angle: 65°, with the Sun about 25° above the horizon Solar longitude: 228.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Dark Slope Streak with Strea
…
PIA09681
Sol (our sun)
HiRISE
| Title |
Dark Slope Streak with Streak-Generated Topography |
| Original Caption Released with Image |
Click on image for larger version This is a portion of HiRISE image PSP_003542_2035 [ http://hirise.lpl.arizona.edu/PSP_003542_2035 ] which shows a dark slope streak north of Olympus Mons, in a region was covered by Mars Orbital Camera image R09/00701. (This portion is rotated with south up so that the direction the streak flowed is towards the bottom of the frame). This image shows that the slope streak forming process altered the pre-existing surface both by excavating material and depositing it. The fine scalloped texture of the surrounding surface is not present within the streak, and there are low linear mounds within the streak that are not seen outside. Their absence outside the streak indicates that the formation of the mounds resulted from the streak formation process. There is a large boulder or knob within the streak near the top of the frame which the dark slope streak appears to have flowed around, leaving a light-toned patch of the surrounding surface material intact downstream of the boulder. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:22 PM Degrees latitude (centered): 23.3° Degrees longitude (East): 223.7° Range to target site: 285.3 km (178.3 miles) Original image scale range: 28.5 cm/pixel (with 1 x 1 binning) so objects ~86 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.6° Phase angle: 71.6° Solar incidence angle: 65°, with the Sun about 25° above the horizon Solar longitude: 228.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Layered Deposits in Ritchey
…
PIA09667
Sol (our sun)
HiRISE
| Title |
Layered Deposits in Ritchey Crater |
| Original Caption Released with Image |
Click on image for larger version HiRISE image (PSP_003249_1510 [ http://hirise.lpl.arizona.edu/PSP_003249_1510 ]) shows eroding layered deposits in Ritchey Crater, a large impact crater in the southern highlands. Three general units can be seen: a relatively dark upper layer, a light middle unit, and the floor material, which may be mostly obscured by dust. The dark cap layer appears to be relatively hard and resistant, while the light material is weak. Once the upper layer is removed, the light layer does not last long. The cutout from the top center part of the image shows this stack. The dark unit is thin and breaking into boulders. The light material is actually divided into smaller layers, and is pervasively fractured. However, the boulders falling from the edge are mostly small and rarely remain intact if they move more than a few meters. The cracking of the layer could be due to water loss from the layer, or to regional tectonic effects such as stresses from burial and erosion. The base unit is partially covered by wind-blown ripples. It is unclear how each of these layers formed. Volcanic ash layers, lake or stream deposits, or sandstone deposited by dunes can all produce horizontal layers. Unraveling the origin would provide important clues to Mars' past. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:40 PM Degrees latitude (centered): -28.5° Degrees longitude (East): 309.4° Range to target site: 259.1 km (161.9 miles) Original image scale range: 25.9 cm/pixel (with 1 x 1 binning) so objects ~78 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.4° Phase angle: 60.4° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 214.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Layered Deposits in Ritchey
…
PIA09667
Sol (our sun)
HiRISE
| Title |
Layered Deposits in Ritchey Crater |
| Original Caption Released with Image |
Click on image for larger version HiRISE image (PSP_003249_1510 [ http://hirise.lpl.arizona.edu/PSP_003249_1510 ]) shows eroding layered deposits in Ritchey Crater, a large impact crater in the southern highlands. Three general units can be seen: a relatively dark upper layer, a light middle unit, and the floor material, which may be mostly obscured by dust. The dark cap layer appears to be relatively hard and resistant, while the light material is weak. Once the upper layer is removed, the light layer does not last long. The cutout from the top center part of the image shows this stack. The dark unit is thin and breaking into boulders. The light material is actually divided into smaller layers, and is pervasively fractured. However, the boulders falling from the edge are mostly small and rarely remain intact if they move more than a few meters. The cracking of the layer could be due to water loss from the layer, or to regional tectonic effects such as stresses from burial and erosion. The base unit is partially covered by wind-blown ripples. It is unclear how each of these layers formed. Volcanic ash layers, lake or stream deposits, or sandstone deposited by dunes can all produce horizontal layers. Unraveling the origin would provide important clues to Mars' past. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:40 PM Degrees latitude (centered): -28.5° Degrees longitude (East): 309.4° Range to target site: 259.1 km (161.9 miles) Original image scale range: 25.9 cm/pixel (with 1 x 1 binning) so objects ~78 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.4° Phase angle: 60.4° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 214.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Layered Deposits in Ritchey
…
PIA09667
Sol (our sun)
HiRISE
| Title |
Layered Deposits in Ritchey Crater |
| Original Caption Released with Image |
Click on image for larger version HiRISE image (PSP_003249_1510 [ http://hirise.lpl.arizona.edu/PSP_003249_1510 ]) shows eroding layered deposits in Ritchey Crater, a large impact crater in the southern highlands. Three general units can be seen: a relatively dark upper layer, a light middle unit, and the floor material, which may be mostly obscured by dust. The dark cap layer appears to be relatively hard and resistant, while the light material is weak. Once the upper layer is removed, the light layer does not last long. The cutout from the top center part of the image shows this stack. The dark unit is thin and breaking into boulders. The light material is actually divided into smaller layers, and is pervasively fractured. However, the boulders falling from the edge are mostly small and rarely remain intact if they move more than a few meters. The cracking of the layer could be due to water loss from the layer, or to regional tectonic effects such as stresses from burial and erosion. The base unit is partially covered by wind-blown ripples. It is unclear how each of these layers formed. Volcanic ash layers, lake or stream deposits, or sandstone deposited by dunes can all produce horizontal layers. Unraveling the origin would provide important clues to Mars' past. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:40 PM Degrees latitude (centered): -28.5° Degrees longitude (East): 309.4° Range to target site: 259.1 km (161.9 miles) Original image scale range: 25.9 cm/pixel (with 1 x 1 binning) so objects ~78 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.4° Phase angle: 60.4° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 214.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Proposed MSL Site in Eberswa
…
PIA09678
Sol (our sun)
HiRISE
| Title |
Proposed MSL Site in Eberswalde Crater |
| Original Caption Released with Image |
Click on image for larger version HiRISE image (PSP_003231_2095 [ http://hirise.lpl.arizona.edu/PSP_003231_2095 ]) of proposed landing site for the Mars Science Laboratory (MSL) [ http://mars.jpl.nasa.gov/msl/ ] in Eberswalde Crater. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:28 PM Degrees latitude (centered): 29.3° Degrees longitude (East): 73.3° Range to target site: 290.3 km (181.4 miles) Original image scale range: 29.0 cm/pixel (with 1 x 1 binning) so objects ~87 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 8.0° Phase angle: 73.5° Solar incidence angle: 66°, with the Sun about 24° above the horizon Solar longitude: 213.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Proposed MSL Site in Eberswa
…
PIA09678
Sol (our sun)
HiRISE
| Title |
Proposed MSL Site in Eberswalde Crater |
| Original Caption Released with Image |
Click on image for larger version HiRISE image (PSP_003231_2095 [ http://hirise.lpl.arizona.edu/PSP_003231_2095 ]) of proposed landing site for the Mars Science Laboratory (MSL) [ http://mars.jpl.nasa.gov/msl/ ] in Eberswalde Crater. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:28 PM Degrees latitude (centered): 29.3° Degrees longitude (East): 73.3° Range to target site: 290.3 km (181.4 miles) Original image scale range: 29.0 cm/pixel (with 1 x 1 binning) so objects ~87 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 8.0° Phase angle: 73.5° Solar incidence angle: 66°, with the Sun about 24° above the horizon Solar longitude: 213.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Gullies in Trough near Gorgo
…
PIA09671
Sol (our sun)
HiRISE
| Title |
Gullies in Trough near Gorgonum Chaos |
| Original Caption Released with Image |
, approximately 230 m across) and on the trough walls are resistant, meaning they do not break up mostly into small particles that the wind can easily carry away. Instead, they are breaking up into boulders up to several meters wide that HiRISE can see. (The fact that the layers are eroding as boulders tells us that the material is not easily broken up into smaller and smaller pieces, so it is therefore termed "resistant to erosion.") However, it is not completely resistant to erosion as we can see by the boulders rolling down the slopes. Gullies are thought by many to require liquid water to form. A major debate is whether this water comes from the surface (i.e., melting surface ice or melting snow) or the subsurface (i.e., from an aquifer). Gullies are often found to originate at layers, like those seen here. The subsurface water theory states that water travels under the surface to slope faces where it flows down the slope to form gullies. Visible layers are suggested to be impermeable, such that water cannot penetrate them, which is why the gullies originate from beneath the layers. Often gullies will originate between layers, which suggests that there is a permeable layer trapped between impermeable layers. It is also possible that the layer preferentially traps ice or snow that may melt to form gullies, thus providing a surface source of water to form the gullies. Please note that the stripe-like features on the left side of the image are camera artifacts and not real features. Observation Toolbox Acquisition date: 12 December 2006 Local Mars time: 3:48 PM Degrees latitude (centered): -38.2° Degrees longitude (East): 188.8° Range to target site: 255.7 km (159.8 miles) Original image scale range: from 25.6 cm/pixel (with 1 x 1 binning) to 51.2 cm/pixel (with 2 x 2 binning) Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.3° Phase angle: 65.3° Solar incidence angle: 71°, with the Sun about 19° above the horizon Solar longitude: 159.1°, Northern Summer NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo., Click on image for larger version This HiRISE image (PSP_002014_1415 [ http://hirise.lpl.arizona.edu/PSP_002014_1415 ]) shows gullies in a trough that is near Gorgonum Chaos, a region filled with gullies. The trough gullies, like many of the gullies on nearby Gorgonum Chaos mesas, appear to originate at a distinct layer. There are mounds within the trough that have layers exposed near their peaks. The layers in the mound (see subimage |
|
Gullies in Trough near Gorgo
…
PIA09671
Sol (our sun)
HiRISE
| Title |
Gullies in Trough near Gorgonum Chaos |
| Original Caption Released with Image |
, approximately 230 m across) and on the trough walls are resistant, meaning they do not break up mostly into small particles that the wind can easily carry away. Instead, they are breaking up into boulders up to several meters wide that HiRISE can see. (The fact that the layers are eroding as boulders tells us that the material is not easily broken up into smaller and smaller pieces, so it is therefore termed "resistant to erosion.") However, it is not completely resistant to erosion as we can see by the boulders rolling down the slopes. Gullies are thought by many to require liquid water to form. A major debate is whether this water comes from the surface (i.e., melting surface ice or melting snow) or the subsurface (i.e., from an aquifer). Gullies are often found to originate at layers, like those seen here. The subsurface water theory states that water travels under the surface to slope faces where it flows down the slope to form gullies. Visible layers are suggested to be impermeable, such that water cannot penetrate them, which is why the gullies originate from beneath the layers. Often gullies will originate between layers, which suggests that there is a permeable layer trapped between impermeable layers. It is also possible that the layer preferentially traps ice or snow that may melt to form gullies, thus providing a surface source of water to form the gullies. Please note that the stripe-like features on the left side of the image are camera artifacts and not real features. Observation Toolbox Acquisition date: 12 December 2006 Local Mars time: 3:48 PM Degrees latitude (centered): -38.2° Degrees longitude (East): 188.8° Range to target site: 255.7 km (159.8 miles) Original image scale range: from 25.6 cm/pixel (with 1 x 1 binning) to 51.2 cm/pixel (with 2 x 2 binning) Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.3° Phase angle: 65.3° Solar incidence angle: 71°, with the Sun about 19° above the horizon Solar longitude: 159.1°, Northern Summer NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo., Click on image for larger version This HiRISE image (PSP_002014_1415 [ http://hirise.lpl.arizona.edu/PSP_002014_1415 ]) shows gullies in a trough that is near Gorgonum Chaos, a region filled with gullies. The trough gullies, like many of the gullies on nearby Gorgonum Chaos mesas, appear to originate at a distinct layer. There are mounds within the trough that have layers exposed near their peaks. The layers in the mound (see subimage |
|
Gullies in Trough near Gorgo
…
PIA09671
Sol (our sun)
HiRISE
| Title |
Gullies in Trough near Gorgonum Chaos |
| Original Caption Released with Image |
, approximately 230 m across) and on the trough walls are resistant, meaning they do not break up mostly into small particles that the wind can easily carry away. Instead, they are breaking up into boulders up to several meters wide that HiRISE can see. (The fact that the layers are eroding as boulders tells us that the material is not easily broken up into smaller and smaller pieces, so it is therefore termed "resistant to erosion.") However, it is not completely resistant to erosion as we can see by the boulders rolling down the slopes. Gullies are thought by many to require liquid water to form. A major debate is whether this water comes from the surface (i.e., melting surface ice or melting snow) or the subsurface (i.e., from an aquifer). Gullies are often found to originate at layers, like those seen here. The subsurface water theory states that water travels under the surface to slope faces where it flows down the slope to form gullies. Visible layers are suggested to be impermeable, such that water cannot penetrate them, which is why the gullies originate from beneath the layers. Often gullies will originate between layers, which suggests that there is a permeable layer trapped between impermeable layers. It is also possible that the layer preferentially traps ice or snow that may melt to form gullies, thus providing a surface source of water to form the gullies. Please note that the stripe-like features on the left side of the image are camera artifacts and not real features. Observation Toolbox Acquisition date: 12 December 2006 Local Mars time: 3:48 PM Degrees latitude (centered): -38.2° Degrees longitude (East): 188.8° Range to target site: 255.7 km (159.8 miles) Original image scale range: from 25.6 cm/pixel (with 1 x 1 binning) to 51.2 cm/pixel (with 2 x 2 binning) Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 7.3° Phase angle: 65.3° Solar incidence angle: 71°, with the Sun about 19° above the horizon Solar longitude: 159.1°, Northern Summer NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo., Click on image for larger version This HiRISE image (PSP_002014_1415 [ http://hirise.lpl.arizona.edu/PSP_002014_1415 ]) shows gullies in a trough that is near Gorgonum Chaos, a region filled with gullies. The trough gullies, like many of the gullies on nearby Gorgonum Chaos mesas, appear to originate at a distinct layer. There are mounds within the trough that have layers exposed near their peaks. The layers in the mound (see subimage |
|
Alluvial Fan Along a Crater
…
PIA09666
Sol (our sun)
HiRISE
| Title |
Alluvial Fan Along a Crater Wall |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003269_1600 [ http://hirise.lpl.arizona.edu/PSP_003269_1600 ]) covers an alluvial fan along the wall of a large crater in the mid latitudes of the southern hemisphere of Mars. The fan was formed when water and sediments drained down the steep wall of the crater creating a cone-shaped pile of debris at the base. As the fan grew with time, the channels carrying water and sediment across the fan surface changed locations, producing a layered deposit capped by channels radiating from the fan apex along the crater wall. Subsequent stripping of the fan surface by the wind has left the coarser channel deposits in relief and exposed the fine scale layering within the fan in many locations. While is it is not known whether the source of the water responsible for creating the fan was related runoff from precipitation or groundwater or perhaps both, alluvial fans of broadly similar form are observed in many locations on Earth and are usually formed by runoff from precipitation. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:42 PM Degrees latitude (centered): -19.9° Degrees longitude (East): 123.2° Range to target site: 258.6 km (161.6 miles) Original image scale range: 25.9 cm/pixel (with 1 x 1 binning) so objects ~78 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 4.7° Phase angle: 48.6° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 215.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Alluvial Fan Along a Crater
…
PIA09666
Sol (our sun)
HiRISE
| Title |
Alluvial Fan Along a Crater Wall |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003269_1600 [ http://hirise.lpl.arizona.edu/PSP_003269_1600 ]) covers an alluvial fan along the wall of a large crater in the mid latitudes of the southern hemisphere of Mars. The fan was formed when water and sediments drained down the steep wall of the crater creating a cone-shaped pile of debris at the base. As the fan grew with time, the channels carrying water and sediment across the fan surface changed locations, producing a layered deposit capped by channels radiating from the fan apex along the crater wall. Subsequent stripping of the fan surface by the wind has left the coarser channel deposits in relief and exposed the fine scale layering within the fan in many locations. While is it is not known whether the source of the water responsible for creating the fan was related runoff from precipitation or groundwater or perhaps both, alluvial fans of broadly similar form are observed in many locations on Earth and are usually formed by runoff from precipitation. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:42 PM Degrees latitude (centered): -19.9° Degrees longitude (East): 123.2° Range to target site: 258.6 km (161.6 miles) Original image scale range: 25.9 cm/pixel (with 1 x 1 binning) so objects ~78 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 4.7° Phase angle: 48.6° Solar incidence angle: 53°, with the Sun about 37° above the horizon Solar longitude: 215.1°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Craters on South Polar Layer
…
PIA09670
Sol (our sun)
HiRISE
| Title |
Craters on South Polar Layered Deposits |
| Original Caption Released with Image |
Click on image for larger version This subimage, about 2.5 km across, shows the south polar layered deposits exposed in a scarp illuminated from the lower right. This HiRISE image (PSP_002882_0940 [ http://hirise.lpl.arizona.edu/PSP_002882_0940 ]) was taken in the southern spring, when the surface was completely covered by carbon dioxide frost. Therefore, most of the brightness variations in this scene are caused by topography. The polar layered deposits are broken into blocks by fractures in two directions. Neither set of fractures is parallel to the current scarp face, suggesting that they were not formed as the scarp was eroded, but instead are due to pre-existing weaknesses in the polar layered deposits. The four craters at lower left appear to have formed at the same time by an impactor that broke up as it entered the Martian atmosphere. The presence of many craters such as these on the south polar layered deposits indicates that they are not as young as the north polar layered deposits, which have very few craters on them. Observation Toolbox Acquisition date: 3 March 2007 Local Mars time: 7:06 PM Degrees latitude (centered): -85.9° Degrees longitude (East): 303.4° Range to target site: 246.9 km (154.3 miles) Original image scale range: 24.7 cm/pixel (with 1 x 1 binning) so objects ~74 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: POLAR STEREOGRAPHIC Emission angle: 6.7° Phase angle: 78.5° Solar incidence angle: 84°, with the Sun about 6° above the horizon Solar longitude: 196.9°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Craters on South Polar Layer
…
PIA09670
Sol (our sun)
HiRISE
| Title |
Craters on South Polar Layered Deposits |
| Original Caption Released with Image |
Click on image for larger version This subimage, about 2.5 km across, shows the south polar layered deposits exposed in a scarp illuminated from the lower right. This HiRISE image (PSP_002882_0940 [ http://hirise.lpl.arizona.edu/PSP_002882_0940 ]) was taken in the southern spring, when the surface was completely covered by carbon dioxide frost. Therefore, most of the brightness variations in this scene are caused by topography. The polar layered deposits are broken into blocks by fractures in two directions. Neither set of fractures is parallel to the current scarp face, suggesting that they were not formed as the scarp was eroded, but instead are due to pre-existing weaknesses in the polar layered deposits. The four craters at lower left appear to have formed at the same time by an impactor that broke up as it entered the Martian atmosphere. The presence of many craters such as these on the south polar layered deposits indicates that they are not as young as the north polar layered deposits, which have very few craters on them. Observation Toolbox Acquisition date: 3 March 2007 Local Mars time: 7:06 PM Degrees latitude (centered): -85.9° Degrees longitude (East): 303.4° Range to target site: 246.9 km (154.3 miles) Original image scale range: 24.7 cm/pixel (with 1 x 1 binning) so objects ~74 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: POLAR STEREOGRAPHIC Emission angle: 6.7° Phase angle: 78.5° Solar incidence angle: 84°, with the Sun about 6° above the horizon Solar longitude: 196.9°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Craters on South Polar Layer
…
PIA09670
Sol (our sun)
HiRISE
| Title |
Craters on South Polar Layered Deposits |
| Original Caption Released with Image |
Click on image for larger version This subimage, about 2.5 km across, shows the south polar layered deposits exposed in a scarp illuminated from the lower right. This HiRISE image (PSP_002882_0940 [ http://hirise.lpl.arizona.edu/PSP_002882_0940 ]) was taken in the southern spring, when the surface was completely covered by carbon dioxide frost. Therefore, most of the brightness variations in this scene are caused by topography. The polar layered deposits are broken into blocks by fractures in two directions. Neither set of fractures is parallel to the current scarp face, suggesting that they were not formed as the scarp was eroded, but instead are due to pre-existing weaknesses in the polar layered deposits. The four craters at lower left appear to have formed at the same time by an impactor that broke up as it entered the Martian atmosphere. The presence of many craters such as these on the south polar layered deposits indicates that they are not as young as the north polar layered deposits, which have very few craters on them. Observation Toolbox Acquisition date: 3 March 2007 Local Mars time: 7:06 PM Degrees latitude (centered): -85.9° Degrees longitude (East): 303.4° Range to target site: 246.9 km (154.3 miles) Original image scale range: 24.7 cm/pixel (with 1 x 1 binning) so objects ~74 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: POLAR STEREOGRAPHIC Emission angle: 6.7° Phase angle: 78.5° Solar incidence angle: 84°, with the Sun about 6° above the horizon Solar longitude: 196.9°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Proposed MSL Site in Nilo Sy
…
PIA09677
Sol (our sun)
HiRISE
| Title |
Proposed MSL Site in Nilo Syrtis |
| Original Caption Released with Image |
Click on image for larger version HiRISE image (PSP_003231_2095 [ http://hirise.lpl.arizona.edu/PSP_003231_2095 ]) of proposed landing site for the Mars Science Laboratory (MSL) [ http://mars.jpl.nasa.gov/msl/ ] in Nilo Syrtis. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:28 PM Degrees latitude (centered): 29.3° Degrees longitude (East): 73.3° Range to target site: 290.3 km (181.4 miles) Original image scale range: 29.0 cm/pixel (with 1 x 1 binning) so objects ~87 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 8.0° Phase angle: 73.5° Solar incidence angle: 66°, with the Sun about 24° above the horizon Solar longitude: 213.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Proposed MSL Site in Nilo Sy
…
PIA09677
Sol (our sun)
HiRISE
| Title |
Proposed MSL Site in Nilo Syrtis |
| Original Caption Released with Image |
Click on image for larger version HiRISE image (PSP_003231_2095 [ http://hirise.lpl.arizona.edu/PSP_003231_2095 ]) of proposed landing site for the Mars Science Laboratory (MSL) [ http://mars.jpl.nasa.gov/msl/ ] in Nilo Syrtis. Observation Toolbox Acquisition date: 4 April 2007 Local Mars time: 3:28 PM Degrees latitude (centered): 29.3° Degrees longitude (East): 73.3° Range to target site: 290.3 km (181.4 miles) Original image scale range: 29.0 cm/pixel (with 1 x 1 binning) so objects ~87 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 8.0° Phase angle: 73.5° Solar incidence angle: 66°, with the Sun about 24° above the horizon Solar longitude: 213.3°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Kaiser Crater Dune Field
PIA09669
Sol (our sun)
HiRISE
| Title |
Kaiser Crater Dune Field |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003141_1330 [ http://hirise.lpl.arizona.edu/PSP_003141_1330 ]) shows a sand dune field in Kaiser Crater, a 210 km (130 miles) wide impact basin in the Hellespontus region of Mars. Winds have trapped massive quantities of sand on the floors of broad craters in this region. The steepest slopes on each dune, the slip faces, point to the east indicating that the dominant wind direction in this part of the dune field is from west to east. Patches of seasonal frost can be seen in the low areas between the dunes. The subimage reveals smaller secondary dunes superimposed on the surface of the large dunes and even smaller ripples that appear between and perpendicular to the secondary dunes. Avalanching or mass movement of sand has left deep scars on the slip face of the large dune in the upper left portion of the subimage. This may indicate that the sand is not loose but is weakly cemented. Observation Toolbox Acquisition date: 3 March 2007 Local Mars time: 3:43 PM Degrees latitude (centered): -46.6° Degrees longitude (East): 19.3° Range to target site: 263.9 km (164.9 miles) Original image scale range: 26.4 cm/pixel (with 1 x 1 binning) so objects ~79 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 17.5° Phase angle: 74.6° Solar incidence angle: 58°, with the Sun about 32° above the horizon Solar longitude: 209.0°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Kaiser Crater Dune Field
PIA09669
Sol (our sun)
HiRISE
| Title |
Kaiser Crater Dune Field |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003141_1330 [ http://hirise.lpl.arizona.edu/PSP_003141_1330 ]) shows a sand dune field in Kaiser Crater, a 210 km (130 miles) wide impact basin in the Hellespontus region of Mars. Winds have trapped massive quantities of sand on the floors of broad craters in this region. The steepest slopes on each dune, the slip faces, point to the east indicating that the dominant wind direction in this part of the dune field is from west to east. Patches of seasonal frost can be seen in the low areas between the dunes. The subimage reveals smaller secondary dunes superimposed on the surface of the large dunes and even smaller ripples that appear between and perpendicular to the secondary dunes. Avalanching or mass movement of sand has left deep scars on the slip face of the large dune in the upper left portion of the subimage. This may indicate that the sand is not loose but is weakly cemented. Observation Toolbox Acquisition date: 3 March 2007 Local Mars time: 3:43 PM Degrees latitude (centered): -46.6° Degrees longitude (East): 19.3° Range to target site: 263.9 km (164.9 miles) Original image scale range: 26.4 cm/pixel (with 1 x 1 binning) so objects ~79 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 17.5° Phase angle: 74.6° Solar incidence angle: 58°, with the Sun about 32° above the horizon Solar longitude: 209.0°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Kaiser Crater Dune Field
PIA09669
Sol (our sun)
HiRISE
| Title |
Kaiser Crater Dune Field |
| Original Caption Released with Image |
Click on image for larger version This HiRISE image (PSP_003141_1330 [ http://hirise.lpl.arizona.edu/PSP_003141_1330 ]) shows a sand dune field in Kaiser Crater, a 210 km (130 miles) wide impact basin in the Hellespontus region of Mars. Winds have trapped massive quantities of sand on the floors of broad craters in this region. The steepest slopes on each dune, the slip faces, point to the east indicating that the dominant wind direction in this part of the dune field is from west to east. Patches of seasonal frost can be seen in the low areas between the dunes. The subimage reveals smaller secondary dunes superimposed on the surface of the large dunes and even smaller ripples that appear between and perpendicular to the secondary dunes. Avalanching or mass movement of sand has left deep scars on the slip face of the large dune in the upper left portion of the subimage. This may indicate that the sand is not loose but is weakly cemented. Observation Toolbox Acquisition date: 3 March 2007 Local Mars time: 3:43 PM Degrees latitude (centered): -46.6° Degrees longitude (East): 19.3° Range to target site: 263.9 km (164.9 miles) Original image scale range: 26.4 cm/pixel (with 1 x 1 binning) so objects ~79 cm across are resolved Map-projected scale: 25 cm/pixel and north is up Map-projection: EQUIRECTANGULAR Emission angle: 17.5° Phase angle: 74.6° Solar incidence angle: 58°, with the Sun about 32° above the horizon Solar longitude: 209.0°, Northern Autumn NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
|
