|
|
Acheron Fossae in Visible Li
| title |
Acheron Fossae in Visible Light |
| Description |
This visible-light image, taken by the thermal emission imaging system's camera on NASA's 2001 Mars Odyssey spacecraft, shows the highly fractured, faulted and deformed Acheron Fossae region of Mars. The scarps visible in this image are approximately one kilometer (3,300 feet) high, based on topography derived from the laser altimeter instrument on Mars Global Surveyor. Dark streaks only 50 meters (164 feet) across can be seen on some of the cliff faces. These streaks may be formed when the pervasive dust mantle covering this region gives way on steep slopes to create dust avalanches. The image also shows impact craters as small as 500 meters (1,640 feet) in diameter, as well as smooth and textured plains. Acheron Fossae is located 1,050 kilometers (650 miles) north of the large shield volcano Olympus Mons. This image covers an area about 18 by 9 kilometers (11 by 6 miles) centered at 37 degrees north, 131 degrees west. North is to the top of this image, which was acquired on February 19, 2002, at about 3:15 p.m. local Martian time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The thermal emission imaging system was provided by Arizona State University, Tempe. Lockheed Martin Astronautics, Denver, is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. Photo Credit: NASA/Jet Propulsion Laboratory/Arizona State University |
|
Distributory Fan Near Holden
PIA04869
Sol (our sun)
Mars Orbiter Camera
| Title |
Distributory Fan Near Holden Crater |
| Original Caption Released with Image |
Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas. |
|
Distributory Fan Near Holden
PIA04869
Sol (our sun)
Mars Orbiter Camera
| Title |
Distributory Fan Near Holden Crater |
| Original Caption Released with Image |
Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas. |
|
Distributory Fan Near Holden
PIA04869
Sol (our sun)
Mars Orbiter Camera
| Title |
Distributory Fan Near Holden Crater |
| Original Caption Released with Image |
Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas. |
|
Distributory Fan Near Holden
PIA04869
Sol (our sun)
Mars Orbiter Camera
| Title |
Distributory Fan Near Holden Crater |
| Original Caption Released with Image |
Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas. |
|
Distributory Fan Near Holden
PIA04869
Sol (our sun)
Mars Orbiter Camera
| Title |
Distributory Fan Near Holden Crater |
| Original Caption Released with Image |
Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas. |
|
Distributory Fan Near Holden
PIA04869
Sol (our sun)
Mars Orbiter Camera
| Title |
Distributory Fan Near Holden Crater |
| Original Caption Released with Image |
Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas. |
|
Distributory Fan Near Holden
PIA04869
Sol (our sun)
Mars Orbiter Camera
| Title |
Distributory Fan Near Holden Crater |
| Original Caption Released with Image |
Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas. |
|
Distributory Fan Near Holden
PIA04869
Sol (our sun)
Mars Orbiter Camera
| Title |
Distributory Fan Near Holden Crater |
| Original Caption Released with Image |
Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas. |
|
Distributory Fan Near Holden
PIA04869
Sol (our sun)
Mars Orbiter Camera
| Title |
Distributory Fan Near Holden Crater |
| Original Caption Released with Image |
Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Light-Toned Bedrock Along Cr
PIA09190
Sol (our sun)
HiRISE
| Title |
Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration |
| Original Caption Released with Image |
This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo. |
|
Procedure for Finding New Im
PIA09021
Sol (our sun)
Mars Orbiter Camera
| Title |
Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera |
| Original Caption Released with Image |
), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ]. |
|
Procedure for Finding New Im
PIA09021
Sol (our sun)
Mars Orbiter Camera
| Title |
Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera |
| Original Caption Released with Image |
), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ]. |
|
Procedure for Finding New Im
PIA09021
Sol (our sun)
Mars Orbiter Camera
| Title |
Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera |
| Original Caption Released with Image |
), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ]. |
|
Procedure for Finding New Im
PIA09021
Sol (our sun)
Mars Orbiter Camera
| Title |
Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera |
| Original Caption Released with Image |
), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ]. |
|
Procedure for Finding New Im
PIA09021
Sol (our sun)
Mars Orbiter Camera
| Title |
Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera |
| Original Caption Released with Image |
), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ]. |
|
Procedure for Finding New Im
PIA09021
Sol (our sun)
Mars Orbiter Camera
| Title |
Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera |
| Original Caption Released with Image |
), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ]. |
|
Procedure for Finding New Im
PIA09021
Sol (our sun)
Mars Orbiter Camera
| Title |
Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera |
| Original Caption Released with Image |
), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ]. |
|
New Gully Deposit in a Crate
PIA09028
Sol (our sun)
Mars Orbiter Camera
| Title |
New Gully Deposit in a Crater in the Centauri Montes Region |
| Original Caption Released with Image |
). The second case, in an unnamed crater in the Centauri Montes region, east of the Hellas Basin, is described here. Gullies were first described by Mars Orbiter Camera scientists in June 2000, and many examples were presented in our June 2000 web releases and in a paper published in the journal Science. Additional examples of these middle and high-latitude landforms can be seen among the other more than 1,600 web releases. The new gully deposit in an unnamed crater in the Centauri Montes region is located near 38.7 degrees south latitude, 263.3 degrees west longitude. Like the new gully deposit in Terra Sirenum, this one has a light tone relative to its surroundings. It is on an equator-facing slope on which numerous narrow gully channels occur. As this slope is always in sunlight during the afternoons when Mars Global Surveyor passes overhead, the gullies always appear somewhat "washed out," just as craters on a full Moon do when viewed from Earth with a telescope. The new, light-toned flow was first noticed by the Mars Orbiter Camera science operations team in an image acquired on Sept. 10, 2005. Re-examination of other images of this crater showed that the new deposit had actually been present on Feb. 21, 2004, when the distal (down-slope) end of the deposit was captured in other images. In February 2004, the deposit had gone unnoticed because only a small portion of it was imaged. This location was first imaged by the Mars Orbiter Camera on Aug. 30, 1999. The deposit was not present at that time. Thus, it formed between Aug. 30, 1999 and Feb. 21, 2004. Roughly 20 percent brighter than the surface as it appeared before the flow occurred, the new deposit exhibits characteristics consistent with transport and deposition of a fluid that behaved like liquid water and likely transported some fine-grained sediment along with it. The distal end of the flow broke into several branches, or digits, and the material diverted and flowed around low obstacles. As with the example in Terra Sirenum, the depth of the flow is too thin to be measured in 1.5-meter-per-pixel (1.7-yard-per-pixel) images, so a very small volume of liquid and sediment was involved. While the material flowed and easily budded into several branches, it also must have moved slow enough to not topple over some of the low obstacles in its path. This picture is a colorized view of the light-toned gully deposit, draped over a topographic image derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment. Figure A: This figure shows the southeast wall of the unnamed crater in the Centauri Montes region, as it appeared in August 1999, and later in September 2005. No light-toned deposit was present in August 1999, but appeared by February 2004. The 300-meter scale bar represents 328 yards. Figure B: The second figure is a, Two Martian southern mid-latitude craters have new light-toned deposits that formed in gully settings during the course of the Mars Global Surveyor mission. Images from the Mars Orbiter Camera documented one case in an unnamed crater in Terra Sirenum, described in an accompanying release (see PIA09027 [ http://photojournal.jpl.nasa.gov/catalog/PIA09027 ] or MOC2-1618 [ http://www.msss.com/mars_images/moc/2006/12/06/gullies/sirenum_crater/index.html ], mosaic of several Mars Global Surveyor images, colorized using a table derived from Mars Reconnaissance Orbiter camera color data and overlain on a sub-frame of a Mars Odyssey Thermal Emission Imaging System image. The 1-kilometer scale bar represents about 0.62 miles. Figure C: The third figure is a colorized view of the light-toned gully deposit as viewed from an oblique perspective, draped over topography derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter camera. The new light-toned flow, by itself, does not prove that liquid water was involved in its genesis. However, this observation and the similar light-toned flow in Terra Sirenum together show that some gully sites are indeed changing today, providing tantalizing evidence there might be sources of liquid water beneath the surface of Mars right now. In both cases, these new flows may be indicating the locations of aquifers (subsurface rocks saturated with water) that could be detected by orbiting, ground-penetrating radar systems such as the Mars Express Mars Advanced Radar for Subsurface and Ionosphere Sounding or the Mars Reconnaissance Orbiter's Mars Shallow Subsurface Radar. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by NASA's Jet Propulsion Laboratory, Pasadena, Calif., a division of the California Institute of Technology, also in Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ]. |
|
New Gully Deposit in a Crate
PIA09028
Sol (our sun)
Mars Orbiter Camera
| Title |
New Gully Deposit in a Crater in the Centauri Montes Region |
| Original Caption Released with Image |
). The second case, in an unnamed crater in the Centauri Montes region, east of the Hellas Basin, is described here. Gullies were first described by Mars Orbiter Camera scientists in June 2000, and many examples were presented in our June 2000 web releases and in a paper published in the journal Science. Additional examples of these middle and high-latitude landforms can be seen among the other more than 1,600 web releases. The new gully deposit in an unnamed crater in the Centauri Montes region is located near 38.7 degrees south latitude, 263.3 degrees west longitude. Like the new gully deposit in Terra Sirenum, this one has a light tone relative to its surroundings. It is on an equator-facing slope on which numerous narrow gully channels occur. As this slope is always in sunlight during the afternoons when Mars Global Surveyor passes overhead, the gullies always appear somewhat "washed out," just as craters on a full Moon do when viewed from Earth with a telescope. The new, light-toned flow was first noticed by the Mars Orbiter Camera science operations team in an image acquired on Sept. 10, 2005. Re-examination of other images of this crater showed that the new deposit had actually been present on Feb. 21, 2004, when the distal (down-slope) end of the deposit was captured in other images. In February 2004, the deposit had gone unnoticed because only a small portion of it was imaged. This location was first imaged by the Mars Orbiter Camera on Aug. 30, 1999. The deposit was not present at that time. Thus, it formed between Aug. 30, 1999 and Feb. 21, 2004. Roughly 20 percent brighter than the surface as it appeared before the flow occurred, the new deposit exhibits characteristics consistent with transport and deposition of a fluid that behaved like liquid water and likely transported some fine-grained sediment along with it. The distal end of the flow broke into several branches, or digits, and the material diverted and flowed around low obstacles. As with the example in Terra Sirenum, the depth of the flow is too thin to be measured in 1.5-meter-per-pixel (1.7-yard-per-pixel) images, so a very small volume of liquid and sediment was involved. While the material flowed and easily budded into several branches, it also must have moved slow enough to not topple over some of the low obstacles in its path. This picture is a colorized view of the light-toned gully deposit, draped over a topographic image derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment. Figure A: This figure shows the southeast wall of the unnamed crater in the Centauri Montes region, as it appeared in August 1999, and later in September 2005. No light-toned deposit was present in August 1999, but appeared by February 2004. The 300-meter scale bar represents 328 yards. Figure B: The second figure is a, Two Martian southern mid-latitude craters have new light-toned deposits that formed in gully settings during the course of the Mars Global Surveyor mission. Images from the Mars Orbiter Camera documented one case in an unnamed crater in Terra Sirenum, described in an accompanying release (see PIA09027 [ http://photojournal.jpl.nasa.gov/catalog/PIA09027 ] or MOC2-1618 [ http://www.msss.com/mars_images/moc/2006/12/06/gullies/sirenum_crater/index.html ], mosaic of several Mars Global Surveyor images, colorized using a table derived from Mars Reconnaissance Orbiter camera color data and overlain on a sub-frame of a Mars Odyssey Thermal Emission Imaging System image. The 1-kilometer scale bar represents about 0.62 miles. Figure C: The third figure is a colorized view of the light-toned gully deposit as viewed from an oblique perspective, draped over topography derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter camera. The new light-toned flow, by itself, does not prove that liquid water was involved in its genesis. However, this observation and the similar light-toned flow in Terra Sirenum together show that some gully sites are indeed changing today, providing tantalizing evidence there might be sources of liquid water beneath the surface of Mars right now. In both cases, these new flows may be indicating the locations of aquifers (subsurface rocks saturated with water) that could be detected by orbiting, ground-penetrating radar systems such as the Mars Express Mars Advanced Radar for Subsurface and Ionosphere Sounding or the Mars Reconnaissance Orbiter's Mars Shallow Subsurface Radar. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by NASA's Jet Propulsion Laboratory, Pasadena, Calif., a division of the California Institute of Technology, also in Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ]. |
|
New Gully Deposit in a Crate
PIA09028
Sol (our sun)
Mars Orbiter Camera
| Title |
New Gully Deposit in a Crater in the Centauri Montes Region |
| Original Caption Released with Image |
). The second case, in an unnamed crater in the Centauri Montes region, east of the Hellas Basin, is described here. Gullies were first described by Mars Orbiter Camera scientists in June 2000, and many examples were presented in our June 2000 web releases and in a paper published in the journal Science. Additional examples of these middle and high-latitude landforms can be seen among the other more than 1,600 web releases. The new gully deposit in an unnamed crater in the Centauri Montes region is located near 38.7 degrees south latitude, 263.3 degrees west longitude. Like the new gully deposit in Terra Sirenum, this one has a light tone relative to its surroundings. It is on an equator-facing slope on which numerous narrow gully channels occur. As this slope is always in sunlight during the afternoons when Mars Global Surveyor passes overhead, the gullies always appear somewhat "washed out," just as craters on a full Moon do when viewed from Earth with a telescope. The new, light-toned flow was first noticed by the Mars Orbiter Camera science operations team in an image acquired on Sept. 10, 2005. Re-examination of other images of this crater showed that the new deposit had actually been present on Feb. 21, 2004, when the distal (down-slope) end of the deposit was captured in other images. In February 2004, the deposit had gone unnoticed because only a small portion of it was imaged. This location was first imaged by the Mars Orbiter Camera on Aug. 30, 1999. The deposit was not present at that time. Thus, it formed between Aug. 30, 1999 and Feb. 21, 2004. Roughly 20 percent brighter than the surface as it appeared before the flow occurred, the new deposit exhibits characteristics consistent with transport and deposition of a fluid that behaved like liquid water and likely transported some fine-grained sediment along with it. The distal end of the flow broke into several branches, or digits, and the material diverted and flowed around low obstacles. As with the example in Terra Sirenum, the depth of the flow is too thin to be measured in 1.5-meter-per-pixel (1.7-yard-per-pixel) images, so a very small volume of liquid and sediment was involved. While the material flowed and easily budded into several branches, it also must have moved slow enough to not topple over some of the low obstacles in its path. This picture is a colorized view of the light-toned gully deposit, draped over a topographic image derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment. Figure A: This figure shows the southeast wall of the unnamed crater in the Centauri Montes region, as it appeared in August 1999, and later in September 2005. No light-toned deposit was present in August 1999, but appeared by February 2004. The 300-meter scale bar represents 328 yards. Figure B: The second figure is a, Two Martian southern mid-latitude craters have new light-toned deposits that formed in gully settings during the course of the Mars Global Surveyor mission. Images from the Mars Orbiter Camera documented one case in an unnamed crater in Terra Sirenum, described in an accompanying release (see PIA09027 [ http://photojournal.jpl.nasa.gov/catalog/PIA09027 ] or MOC2-1618 [ http://www.msss.com/mars_images/moc/2006/12/06/gullies/sirenum_crater/index.html ], mosaic of several Mars Global Surveyor images, colorized using a table derived from Mars Reconnaissance Orbiter camera color data and overlain on a sub-frame of a Mars Odyssey Thermal Emission Imaging System image. The 1-kilometer scale bar represents about 0.62 miles. Figure C: The third figure is a colorized view of the light-toned gully deposit as viewed from an oblique perspective, draped over topography derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter camera. The new light-toned flow, by itself, does not prove that liquid water was involved in its genesis. However, this observation and the similar light-toned flow in Terra Sirenum together show that some gully sites are indeed changing today, providing tantalizing evidence there might be sources of liquid water beneath the surface of Mars right now. In both cases, these new flows may be indicating the locations of aquifers (subsurface rocks saturated with water) that could be detected by orbiting, ground-penetrating radar systems such as the Mars Express Mars Advanced Radar for Subsurface and Ionosphere Sounding or the Mars Reconnaissance Orbiter's Mars Shallow Subsurface Radar. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by NASA's Jet Propulsion Laboratory, Pasadena, Calif., a division of the California Institute of Technology, also in Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ]. |
|
New Gully Deposit in a Crate
PIA09028
Sol (our sun)
Mars Orbiter Camera
| Title |
New Gully Deposit in a Crater in the Centauri Montes Region |
| Original Caption Released with Image |
). The second case, in an unnamed crater in the Centauri Montes region, east of the Hellas Basin, is described here. Gullies were first described by Mars Orbiter Camera scientists in June 2000, and many examples were presented in our June 2000 web releases and in a paper published in the journal Science. Additional examples of these middle and high-latitude landforms can be seen among the other more than 1,600 web releases. The new gully deposit in an unnamed crater in the Centauri Montes region is located near 38.7 degrees south latitude, 263.3 degrees west longitude. Like the new gully deposit in Terra Sirenum, this one has a light tone relative to its surroundings. It is on an equator-facing slope on which numerous narrow gully channels occur. As this slope is always in sunlight during the afternoons when Mars Global Surveyor passes overhead, the gullies always appear somewhat "washed out," just as craters on a full Moon do when viewed from Earth with a telescope. The new, light-toned flow was first noticed by the Mars Orbiter Camera science operations team in an image acquired on Sept. 10, 2005. Re-examination of other images of this crater showed that the new deposit had actually been present on Feb. 21, 2004, when the distal (down-slope) end of the deposit was captured in other images. In February 2004, the deposit had gone unnoticed because only a small portion of it was imaged. This location was first imaged by the Mars Orbiter Camera on Aug. 30, 1999. The deposit was not present at that time. Thus, it formed between Aug. 30, 1999 and Feb. 21, 2004. Roughly 20 percent brighter than the surface as it appeared before the flow occurred, the new deposit exhibits characteristics consistent with transport and deposition of a fluid that behaved like liquid water and likely transported some fine-grained sediment along with it. The distal end of the flow broke into several branches, or digits, and the material diverted and flowed around low obstacles. As with the example in Terra Sirenum, the depth of the flow is too thin to be measured in 1.5-meter-per-pixel (1.7-yard-per-pixel) images, so a very small volume of liquid and sediment was involved. While the material flowed and easily budded into several branches, it also must have moved slow enough to not topple over some of the low obstacles in its path. This picture is a colorized view of the light-toned gully deposit, draped over a topographic image derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment. Figure A: This figure shows the southeast wall of the unnamed crater in the Centauri Montes region, as it appeared in August 1999, and later in September 2005. No light-toned deposit was present in August 1999, but appeared by February 2004. The 300-meter scale bar represents 328 yards. Figure B: The second figure is a, Two Martian southern mid-latitude craters have new light-toned deposits that formed in gully settings during the course of the Mars Global Surveyor mission. Images from the Mars Orbiter Camera documented one case in an unnamed crater in Terra Sirenum, described in an accompanying release (see PIA09027 [ http://photojournal.jpl.nasa.gov/catalog/PIA09027 ] or MOC2-1618 [ http://www.msss.com/mars_images/moc/2006/12/06/gullies/sirenum_crater/index.html ], mosaic of several Mars Global Surveyor images, colorized using a table derived from Mars Reconnaissance Orbiter camera color data and overlain on a sub-frame of a Mars Odyssey Thermal Emission Imaging System image. The 1-kilometer scale bar represents about 0.62 miles. Figure C: The third figure is a colorized view of the light-toned gully deposit as viewed from an oblique perspective, draped over topography derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter camera. The new light-toned flow, by itself, does not prove that liquid water was involved in its genesis. However, this observation and the similar light-toned flow in Terra Sirenum together show that some gully sites are indeed changing today, providing tantalizing evidence there might be sources of liquid water beneath the surface of Mars right now. In both cases, these new flows may be indicating the locations of aquifers (subsurface rocks saturated with water) that could be detected by orbiting, ground-penetrating radar systems such as the Mars Express Mars Advanced Radar for Subsurface and Ionosphere Sounding or the Mars Reconnaissance Orbiter's Mars Shallow Subsurface Radar. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by NASA's Jet Propulsion Laboratory, Pasadena, Calif., a division of the California Institute of Technology, also in Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ]. |
|
New Gully Deposit in a Crate
PIA09028
Sol (our sun)
Mars Orbiter Camera
| Title |
New Gully Deposit in a Crater in the Centauri Montes Region |
| Original Caption Released with Image |
). The second case, in an unnamed crater in the Centauri Montes region, east of the Hellas Basin, is described here. Gullies were first described by Mars Orbiter Camera scientists in June 2000, and many examples were presented in our June 2000 web releases and in a paper published in the journal Science. Additional examples of these middle and high-latitude landforms can be seen among the other more than 1,600 web releases. The new gully deposit in an unnamed crater in the Centauri Montes region is located near 38.7 degrees south latitude, 263.3 degrees west longitude. Like the new gully deposit in Terra Sirenum, this one has a light tone relative to its surroundings. It is on an equator-facing slope on which numerous narrow gully channels occur. As this slope is always in sunlight during the afternoons when Mars Global Surveyor passes overhead, the gullies always appear somewhat "washed out," just as craters on a full Moon do when viewed from Earth with a telescope. The new, light-toned flow was first noticed by the Mars Orbiter Camera science operations team in an image acquired on Sept. 10, 2005. Re-examination of other images of this crater showed that the new deposit had actually been present on Feb. 21, 2004, when the distal (down-slope) end of the deposit was captured in other images. In February 2004, the deposit had gone unnoticed because only a small portion of it was imaged. This location was first imaged by the Mars Orbiter Camera on Aug. 30, 1999. The deposit was not present at that time. Thus, it formed between Aug. 30, 1999 and Feb. 21, 2004. Roughly 20 percent brighter than the surface as it appeared before the flow occurred, the new deposit exhibits characteristics consistent with transport and deposition of a fluid that behaved like liquid water and likely transported some fine-grained sediment along with it. The distal end of the flow broke into several branches, or digits, and the material diverted and flowed around low obstacles. As with the example in Terra Sirenum, the depth of the flow is too thin to be measured in 1.5-meter-per-pixel (1.7-yard-per-pixel) images, so a very small volume of liquid and sediment was involved. While the material flowed and easily budded into several branches, it also must have moved slow enough to not topple over some of the low obstacles in its path. This picture is a colorized view of the light-toned gully deposit, draped over a topographic image derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment. Figure A: This figure shows the southeast wall of the unnamed crater in the Centauri Montes region, as it appeared in August 1999, and later in September 2005. No light-toned deposit was present in August 1999, but appeared by February 2004. The 300-meter scale bar represents 328 yards. Figure B: The second figure is a, Two Martian southern mid-latitude craters have new light-toned deposits that formed in gully settings during the course of the Mars Global Surveyor mission. Images from the Mars Orbiter Camera documented one case in an unnamed crater in Terra Sirenum, described in an accompanying release (see PIA09027 [ http://photojournal.jpl.nasa.gov/catalog/PIA09027 ] or MOC2-1618 [ http://www.msss.com/mars_images/moc/2006/12/06/gullies/sirenum_crater/index.html ], mosaic of several Mars Global Surveyor images, colorized using a table derived from Mars Reconnaissance Orbiter camera color data and overlain on a sub-frame of a Mars Odyssey Thermal Emission Imaging System image. The 1-kilometer scale bar represents about 0.62 miles. Figure C: The third figure is a colorized view of the light-toned gully deposit as viewed from an oblique perspective, draped over topography derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter camera. The new light-toned flow, by itself, does not prove that liquid water was involved in its genesis. However, this observation and the similar light-toned flow in Terra Sirenum together show that some gully sites are indeed changing today, providing tantalizing evidence there might be sources of liquid water beneath the surface of Mars right now. In both cases, these new flows may be indicating the locations of aquifers (subsurface rocks saturated with water) that could be detected by orbiting, ground-penetrating radar systems such as the Mars Express Mars Advanced Radar for Subsurface and Ionosphere Sounding or the Mars Reconnaissance Orbiter's Mars Shallow Subsurface Radar. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by NASA's Jet Propulsion Laboratory, Pasadena, Calif., a division of the California Institute of Technology, also in Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ]. |
|
New Gully Deposit in a Crate
PIA09028
Sol (our sun)
Mars Orbiter Camera
| Title |
New Gully Deposit in a Crater in the Centauri Montes Region |
| Original Caption Released with Image |
). The second case, in an unnamed crater in the Centauri Montes region, east of the Hellas Basin, is described here. Gullies were first described by Mars Orbiter Camera scientists in June 2000, and many examples were presented in our June 2000 web releases and in a paper published in the journal Science. Additional examples of these middle and high-latitude landforms can be seen among the other more than 1,600 web releases. The new gully deposit in an unnamed crater in the Centauri Montes region is located near 38.7 degrees south latitude, 263.3 degrees west longitude. Like the new gully deposit in Terra Sirenum, this one has a light tone relative to its surroundings. It is on an equator-facing slope on which numerous narrow gully channels occur. As this slope is always in sunlight during the afternoons when Mars Global Surveyor passes overhead, the gullies always appear somewhat "washed out," just as craters on a full Moon do when viewed from Earth with a telescope. The new, light-toned flow was first noticed by the Mars Orbiter Camera science operations team in an image acquired on Sept. 10, 2005. Re-examination of other images of this crater showed that the new deposit had actually been present on Feb. 21, 2004, when the distal (down-slope) end of the deposit was captured in other images. In February 2004, the deposit had gone unnoticed because only a small portion of it was imaged. This location was first imaged by the Mars Orbiter Camera on Aug. 30, 1999. The deposit was not present at that time. Thus, it formed between Aug. 30, 1999 and Feb. 21, 2004. Roughly 20 percent brighter than the surface as it appeared before the flow occurred, the new deposit exhibits characteristics consistent with transport and deposition of a fluid that behaved like liquid water and likely transported some fine-grained sediment along with it. The distal end of the flow broke into several branches, or digits, and the material diverted and flowed around low obstacles. As with the example in Terra Sirenum, the depth of the flow is too thin to be measured in 1.5-meter-per-pixel (1.7-yard-per-pixel) images, so a very small volume of liquid and sediment was involved. While the material flowed and easily budded into several branches, it also must have moved slow enough to not topple over some of the low obstacles in its path. This picture is a colorized view of the light-toned gully deposit, draped over a topographic image derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment. Figure A: This figure shows the southeast wall of the unnamed crater in the Centauri Montes region, as it appeared in August 1999, and later in September 2005. No light-toned deposit was present in August 1999, but appeared by February 2004. The 300-meter scale bar represents 328 yards. Figure B: The second figure is a, Two Martian southern mid-latitude craters have new light-toned deposits that formed in gully settings during the course of the Mars Global Surveyor mission. Images from the Mars Orbiter Camera documented one case in an unnamed crater in Terra Sirenum, described in an accompanying release (see PIA09027 [ http://photojournal.jpl.nasa.gov/catalog/PIA09027 ] or MOC2-1618 [ http://www.msss.com/mars_images/moc/2006/12/06/gullies/sirenum_crater/index.html ], mosaic of several Mars Global Surveyor images, colorized using a table derived from Mars Reconnaissance Orbiter camera color data and overlain on a sub-frame of a Mars Odyssey Thermal Emission Imaging System image. The 1-kilometer scale bar represents about 0.62 miles. Figure C: The third figure is a colorized view of the light-toned gully deposit as viewed from an oblique perspective, draped over topography derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter camera. The new light-toned flow, by itself, does not prove that liquid water was involved in its genesis. However, this observation and the similar light-toned flow in Terra Sirenum together show that some gully sites are indeed changing today, providing tantalizing evidence there might be sources of liquid water beneath the surface of Mars right now. In both cases, these new flows may be indicating the locations of aquifers (subsurface rocks saturated with water) that could be detected by orbiting, ground-penetrating radar systems such as the Mars Express Mars Advanced Radar for Subsurface and Ionosphere Sounding or the Mars Reconnaissance Orbiter's Mars Shallow Subsurface Radar. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by NASA's Jet Propulsion Laboratory, Pasadena, Calif., a division of the California Institute of Technology, also in Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ]. |
|
Estimated Radiation on Mars,
PIA03479
Sol (our sun)
Mars Radiation Experiment
| Title |
Estimated Radiation on Mars, Hits per Cell Nucleus |
| Original Caption Released with Image |
This global map of Mars shows estimates for amounts of high-energy-particle cosmic radiation reaching the surface, a serious health concern for any future human exploration of the planet. The estimates are based on cosmic-radiation measurements made on the way to Mars by the Mars radiation environment experiment, an instrument on NASA's 2001 Mars Odyssey spacecraft, plus information about Mars' surface elevations from the laser altimeter instrument on NASA's Mars Global Surveyor. The areas of Mars expected to have least radiation are where elevation is lowest, because those areas have more atmosphere above them to block out some of the radiation. Earth's thick atmosphere shields us from most cosmic radiation, but Mars has a much thinner atmosphere than Earth does. Colors in the map refer to the estimated average number of times per year each cell nucleus in a human there would be hit by a high-energy cosmic ray particle. The range is generally from two hits (color-coded green), a moderate risk level, to eight hits (coded red), a high risk level. NASA's Jet Propulsion Laboratory, Pasadena, Calif. manages the 2001 Mars Odyssey and Mars Global Surveyor missions for NASA's Office of Space Science, Washington D.C. The Mars radiation environment experiment was developed by NASA's Johnson Space Center. Lockheed Martin Astronautics, Denver, is the prime contractor for Odyssey, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. |
|
Acheron Fossae in Visible Li
PIA03481
Sol (our sun)
Thermal Emission Imaging Sys
| Title |
Acheron Fossae in Visible Light |
| Original Caption Released with Image |
This visible-light image, taken by the thermal emission imaging system's camera on NASA's 2001 Mars Odyssey spacecraft, shows the highly fractured, faulted and deformed Acheron Fossae region of Mars. The scarps visible in this image are approximately one kilometer (3,300 feet) high, based on topography derived from the laser altimeter instrument on Mars Global Surveyor. Dark streaks only 50 meters (164 feet) across can be seen on some of the cliff faces. These streaks may be formed when the pervasive dust mantle covering this region gives way on steep slopes to create dust avalanches. The image also shows impact craters as small as 500 meters (1,640 feet) in diameter, as well as smooth and textured plains. Acheron Fossae is located 1,050 kilometers (650 miles) north of the large shield volcano Olympus Mons. This image covers an area about 18 by 9 kilometers (11 by 6 miles) centered at 37 degrees north, 131 degrees west. North is to the top of this image, which was acquired on February 19,2002, at about 3:15 p.m. local Martian time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The thermal emission imaging system was provided by Arizona State University, Tempe. Lockheed Martin Astronautics, Denver, is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. |
|
Estimated Radiation Dosage o
PIA03480
Sol (our sun)
Mars Radiation Experiment
| Title |
Estimated Radiation Dosage on Mars |
| Original Caption Released with Image |
This global map of Mars shows the estimated radiation dosages from cosmic rays reaching the surface, a serious health concern for any future human exploration of the planet. The estimates are based on cosmic-radiation measurements by the Mars radiation environment experiment, an instrument on NASA's Mars 2000 Odyssey spacecraft, plus information about Mars' surface elevations from the laser altimeter instrument on NASA's Mars Global Surveyor. The areas of Mars expected to have the lowest levels of cosmic radiation are where the elevation is lowest, because those areas have more atmosphere above them to block out some of the radiation. Earth's thick atmosphere shields us from most cosmic radiation, but Mars has a much thinner atmosphere than we have on Earth. The colors in the map refer to the estimated annual dose equivalent in rems, a unit of radiation dose. The range is generally from 10 rems(color-coded dark blue) to 20 rems (color coded dark red). Radiation exposure for astronauts on the International Space Station in Earth orbit is typically equivalent to an annualized rate of 20 to 40 rems. NASA's Jet Propulsion Laboratory, Pasadena, Calif. manages the 2001 Mars Odyssey and Mars Global Surveyor missions for NASA's Office of Space Science, Washington D.C. The Mars radiation environment experiment was developed by NASA's Johnson Space Center, Houston. Lockheed Martin Astronautics, Denver, is the prime contractor for Odyssey, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. |
|
|