Narrow Search
 
 
Advanced Search

Browse All : Altimeter of Jet Propulsion Laboratory and California

Printer Friendly
1 2
1-50 of 62
     
     
Radar Slice Through Subsurfa …
title Radar Slice Through Subsurface of Equatorial Deposits on Mars
description This image combining a topographic map viewed obliquely (color portion of image) with a radargram of the subsurface (monochrome portion) shows features of mysterious Martian deposits named the Medusae Fossae Formation. The westward-looking view includes the divide between Martian highlands on the south and lowlands on the north, spanning a range from about 12 degrees south latitude (left edge of image) to 5 degrees north latitude (right edge of image). The deposits of the Medusae Fossae Formation are found in the lowlands along the divide, in the center foreground. The radar sounder on the European Space Agency's Mars Express orbiter has revealed echoes from what is interpreted as a boundary between the overlying deposits and underlying lowland plains buried by these deposits. The radar information presented here is from downward-looking radar observations by the Mars Advanced Radar for Subsurface and Ionospheric Sounding (MARSIS, jointly funded by NASA and the Italian Space Agency) as Mars Express flew a south-to-north path at about 188 degrees east longitude. The topographic map, using 1990s data from the Mars Orbiter Laser Altimeter instrument on NASA's Mars Global Surveyor orbiter, extends from that transect to about 135 degrees east longitude. NASA's Jet Propulsion Laboratory manages NASA's roles in Mars Express for the NASA Science Mission Directorate, Washington. JPL is a division of the California Institute of Technology, in Pasadena. Credit: NASA/JPL-Caltech/ESA/Italian Space Agency/Univ. of Rome/Smithsonian
Acheron Fossae in Visible Li …
title Acheron Fossae in Visible Light
Description This visible-light image, taken by the thermal emission imaging system's camera on NASA's 2001 Mars Odyssey spacecraft, shows the highly fractured, faulted and deformed Acheron Fossae region of Mars. The scarps visible in this image are approximately one kilometer (3,300 feet) high, based on topography derived from the laser altimeter instrument on Mars Global Surveyor. Dark streaks only 50 meters (164 feet) across can be seen on some of the cliff faces. These streaks may be formed when the pervasive dust mantle covering this region gives way on steep slopes to create dust avalanches. The image also shows impact craters as small as 500 meters (1,640 feet) in diameter, as well as smooth and textured plains. Acheron Fossae is located 1,050 kilometers (650 miles) north of the large shield volcano Olympus Mons. This image covers an area about 18 by 9 kilometers (11 by 6 miles) centered at 37 degrees north, 131 degrees west. North is to the top of this image, which was acquired on February 19, 2002, at about 3:15 p.m. local Martian time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The thermal emission imaging system was provided by Arizona State University, Tempe. Lockheed Martin Astronautics, Denver, is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. Photo Credit: NASA/Jet Propulsion Laboratory/Arizona State University
First HiRISE Image of Mars: …
title First HiRISE Image of Mars: Topographic Model from Photoclinometry
Description http://www.nasa.gov/mro [ http://www.nasa.gov/mro ] or http://HiRISE.lpl.arizona.edu [ http://HiRISE.lpl.arizona.edu ]. For information about NASA and agency programs on the Web, visit: http://www.nasa.gov [ http://www.nasa.gov ]. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems is the prime contractor for the project and built the spacecraft. The HiRISE camera was built by Ball Aerospace and Technology Corporation and is operated by the University of Arizona. Credit: NASA/JPL/University of Arizona/USGS, This is a topographic map of part of the area covered by the first image of Mars obtained by the High Resolution Imaging Science Experiment (HiRISE) camera on NASA's Mars Reconnaissance Orbiter spacecraft. The image was processed at the U.S. Geological Survey, Flagstaff, by a technique called photoclinometry (or, more descriptively, "shape-from-shading"). This method allows elevations to be reconstructed from a single image by noting how surfaces sloping toward the sun appear brighter than areas that slope away from it. This image is almost ideal for such interpretation because the low sun angle reveals even subtle slopes with dramatic contrast, and variations in the brightness of surface materials (which could be confused with slopes) are minimal. At left is the region of the image that was analyzed, tinted to approximate the visual appearance of the Martian surface. This region is a square 20.4 kilometers (12.7 miles) wide (8,192 pixels by 8,192 pixels at a scale of 2.49 meters or 8.17 feet per pixel). At right is a color-coded topographic contour map of the same area. The total range of elevations is 1.6 kilometers (1 mile), with low areas shown in purple and high areas in red. Contours mark each 20-meter (66-foot) change in elevation. Photoclinometry gives relative rather than absolute heights, but the overall height and shape of features in this map, such as the ridge Ogygis Rupes in the center, agree reasonably well with results from the Mars Orbiter Laser Altimeter on NASA's Mars Odyssey spacecraft, an instrument with high absolute accuracy but relatively low spatial resolution. The real value of mapping by photoclinometry, however, is that it reveals the details of the smallest topographic features resolved by the image. In this example, the image was resampled by a factor of 2 before processing, so the topographic map has a scale of 5 meters (16 feet) per pixel and resolves features as small as 15 meters (49 feet). Computer-generated three-dimensional close-ups of the surface provide one way to visualize these small but important clues to Martian geologic history. This illustration shows a subset of AEB_000001_0000_Red, which was taken by the HiRISE camera on March 24, 2006. The image is oriented such that north is 7 degrees to the left of up. The range to the target was 2,493 kilometers (1,549 miles). At this distance the image scale is 2.49 meters (8.17 feet) per pixel, so objects as small as 7.5 meters (24.6 feet) are resolved. The image was taken at a local Mars time of 07:33 and the scene is illuminated from the upper right with a solar incidence angle of 78.1 degrees, thus the sun was about 11.9 degrees above the horizon. At an Ls of 29 degrees (with Ls an indicator of Mars' position in its orbit around the sun), the season on Mars is southern autumn. Images from the High Resolution Imaging Science Experiment and additional information about the Mars Reconnaissance Orbiter are available online at:
The Geodesy Campaign
PIA02023
Sol (our sun)
Mars Orbiter Camera
Title The Geodesy Campaign
Original Caption Released with Image Every day, Mars Global Surveyor (MGS) circles the red planet just over twelve times, and from their vantage point at 400 km altitude, the fisheye lenses of the Mars Orbiter Camera (MOC)Wide Angle (WA) cameras can see the entire surface. During typical operations, highly-summed two-color image strips are transmitted for each orbit and assembled into daily global weather maps, with a resolution of about 7.5 km (4.6 miles) per pixel. The small size and low resolution of these strips leaves most of the data bandwidth available for higher-priority Narrow Angle images. During May 1999, however, the Wide Angle cameras are being used instead to map the whole planet at the intrinsic resolution of the WA camera -- 230 meters (750 feet) per pixel. While the blue WA camera continues to capture the global map so that daily weather can still be monitored, the other WA camera (with the red filter) is building up swaths of full-resolution coverage. The Deep Space Network is tracking the spacecraft 24 hours a day during this geodesy campaign, and imaging data are being returned for about two-thirds of the time at 69 kbits/sec(somewhat faster than a 56K modem). During the other third of the time, the spacecraft is transmitting back to Earth one day's worth of recorded data from the other science instruments. Geodesy is the measurement of a planet's shape and the location of features on its surface. The intent of the geodesy campaign is to acquire, during a short period of time, simultaneous measurements by the Mars Orbiter Laser Altimeter (MOLA), the Radio Science (RS)investigation, and the MOC. MOLA observations provide precise, absolute measurements of a set of profiles around the planet, but their spacing is quite large relative to their resolution. RS measurements provide detailed information about the position of the spacecraft, critical to processing both the MOC and MOLA data. MOC provides both a higher resolution base map on which the other data can be overlain and, using stereoscopic measurements, provides the potential for a ten-fold improvement in the spatial resolution of the topography. Owing to the nature of the MGS orbit, the groundtrack returns to within about 30 km of a given orbit 88 orbits (about one week) later. Thus, it takes a week to build up global coverage at full resolution. Figure MOC2-127a [ http://photojournal.jpl.nasa.gov/catalog/PIA02022 ], shows the planning map of coverage during the first week of the campaign (top), and the resulting actual coverage (bottom). Gaps caused by recorder playbacks must be filled in a second week of imaging by moving the times of the playbacks. Also in the second week, stereo coverage is acquired by re-imaging areas from adjacent orbits at aside-looking angle. Figure MOC2-127b shows an example of such stereo from the Mare Tyrrhenum region, centered at 27.3°S, 227.0°W (NOTE: Red-blue glasses are needed to view the stereo effect). The crater that dominates the center of Figure MOC2-127b is about 50 kilometers (31 miles) across. Stereo coverage will be completed in the third and fourth weeks. The remaining data volume will be used to fill in gaps created by data losses, and to acquire a somewhat lower resolution global color image through the blue wide angle camera. The resulting dataset will provide global color and stereo coverage at about 300 m/pixel. Although similar coverage was obtained by the Viking mission in the late 1970s, Viking took over three years to cover the planet, and there are significant variations in lighting, weather, and surface features in the Viking images. A substantial improvement in the longitude/latitude grid is expected, which will have important benefits to future Mars exploration. Malin Space Science Systems and the California Institute of Technology built the MOC using spare hardware from the Mars Observer mission. MSSS operates the camera from its facilities in San Diego, CA. The Jet Propulsion Laboratory's Mars Surveyor Operations Project operates the Mars Global Surveyor spacecraft with its industrial partner, Lockheed Martin Astronautics, from facilities in Pasadena, CA and Denver, CO.
The Geodesy Campaign
PIA02022
Sol (our sun)
Mars Orbiter Camera
Title The Geodesy Campaign
Original Caption Released with Image Figure MOC2-127b [ http://photojournal.jpl.nasa.gov/catalog/PIA02023 ] is about 50 kilometers (31 miles) across. Stereo coverage will be completed in the third and fourth weeks. The remaining data volume will be used to fill in gaps created by data losses, and to acquire a somewhat lower resolution global color image through the blue wide angle camera. The resulting dataset will provide global color and stereo coverage at about 300 m/pixel. Although similar coverage was obtained by the Viking mission in the late 1970s, Viking took over three years to cover the planet, and there are significant variations in lighting, weather, and surface features in the Viking images. A substantial improvement in the longitude/latitude grid is expected, which will have important benefits to future Mars exploration. Malin Space Science Systems and the California Institute of Technology built the MOC using spare hardware from the Mars Observer mission. MSSS operates the camera from its facilities in San Diego, CA. The Jet Propulsion Laboratory's Mars Surveyor Operations Project operates the Mars Global Surveyor spacecraft with its industrial partner, Lockheed Martin Astronautics, from facilities in Pasadena, CA and Denver, CO., Every day, Mars Global Surveyor (MGS) circles the red planet just over twelve times, and from their vantage point at 400 km altitude, the fisheye lenses of the Mars Orbiter Camera (MOC)Wide Angle (WA) cameras can see the entire surface. During typical operations, highly-summed two-color image strips are transmitted for each orbit and assembled into daily global weather maps, with a resolution of about 7.5 km (4.6 miles) per pixel. The small size and low resolution of these strips leaves most of the data bandwidth available for higher-priority narrow Angle images. During May 1999, however, the Wide Angle cameras are being used instead to map the whole planet at the intrinsic resolution of the WA camera -- 230 meters (750 feet) per pixel. While the blue WA camera continues to capture the global map so that daily weather can still be monitored, the other WA camera (with the red filter) is building up swaths of full-resolution coverage. The Deep Space Network is tracking the spacecraft 24 hours a day during this geodesy campaign, and imaging data are being returned for about two-thirds of the time at 69 kbits/sec (somewhat faster than a 56K modem). During the other third of the time, the spacecraft is transmitting back to Earth one day's worth of recorded data from the other science instruments. Geodesy is the measurement of a planet's shape and the location of features on its surface. The intent of the geodesy campaign is to acquire, during a short period of time, simultaneous measurements by the Mars Orbiter Laser Altimeter (MOLA), the Radio Science (RS)investigation, and the MOC. MOLA observations provide precise, absolute measurements of a set of profiles around the planet, but their spacing is quite large relative to their resolution. RS measurements provide detailed information about the position of the spacecraft, critical to processing both the MOC and MOLA data. MOC provides both a higher resolution base map on which the other data can be overlain and, using stereoscopic measurements, provides the potential for a ten-fold improvement in the spatial resolution of the topography. Owing to the nature of the MGS orbit, the groundtrack returns to within about 30 km of a given orbit 88 orbits (about one week) later. Thus, it takes a week to build up global coverage at full resolution. Figure MOC2-127a shows the planning map of coverage during the first week of the campaign (top), and the resulting actual coverage (bottom). Gaps caused by recorder playbacks must be filled in a second week of imaging by moving the times of the playbacks. Also in the second week, stereo coverage is acquired by re-imaging areas from adjacent orbits at aside-looking angle. Figure MOC2-127b [ http://photojournal.jpl.nasa.gov/catalog/PIA02023 ] shows an example of such stereo from the Mare Tyrrhenum region, centered at 27.3°S, 227.0°W (NOTE: Red-blue glasses are needed to view the stereo effect). The crater that dominates the center of
Distributory Fan Near Holden …
PIA04869
Sol (our sun)
Mars Orbiter Camera
Title Distributory Fan Near Holden Crater
Original Caption Released with Image Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas.
Distributory Fan Near Holden …
PIA04869
Sol (our sun)
Mars Orbiter Camera
Title Distributory Fan Near Holden Crater
Original Caption Released with Image Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas.
Distributory Fan Near Holden …
PIA04869
Sol (our sun)
Mars Orbiter Camera
Title Distributory Fan Near Holden Crater
Original Caption Released with Image Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas.
Distributory Fan Near Holden …
PIA04869
Sol (our sun)
Mars Orbiter Camera
Title Distributory Fan Near Holden Crater
Original Caption Released with Image Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas.
Distributory Fan Near Holden …
PIA04869
Sol (our sun)
Mars Orbiter Camera
Title Distributory Fan Near Holden Crater
Original Caption Released with Image Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas.
Distributory Fan Near Holden …
PIA04869
Sol (our sun)
Mars Orbiter Camera
Title Distributory Fan Near Holden Crater
Original Caption Released with Image Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas.
Distributory Fan Near Holden …
PIA04869
Sol (our sun)
Mars Orbiter Camera
Title Distributory Fan Near Holden Crater
Original Caption Released with Image Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas.
Distributory Fan Near Holden …
PIA04869
Sol (our sun)
Mars Orbiter Camera
Title Distributory Fan Near Holden Crater
Original Caption Released with Image Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas.
Distributory Fan Near Holden …
PIA04869
Sol (our sun)
Mars Orbiter Camera
Title Distributory Fan Near Holden Crater
Original Caption Released with Image Click on image for larger view A region near the center of the fan has a loop, the inverted floor of a former meandering stream that was cut off as the channel adjusted its course. Meanders and cut-off meanders are the prime evidence for persistent flow of water through this area sometime early in martian history.Click on image for larger view A region near the southeast edge of the fan shows inverted channels at different levels within the sedimentary deposit, indicating a long and complex history of water-related processes. One ridge crosses over another just left of the center of this frame. The top of the lower ridge is the former floor of a channel that was transporting water and sediment toward the lower right. The top of the upper ridge was once the floor of a channel that moved material toward the right or upper right. The lower ridge is the older channel. It was completely filled and buried beneath the surface when the upper channel formed.Click on image for larger view A regional context image shows the location of the fan with a white box. West of the fan are several valleys that fed water and sediment to the crater holding the fan (labeled "Holden NE" Crater). This map is a mosaic of daytime infrared images from the Thermal Emission Imaging System on Mars Odyssey. The contours are topography relative to Mars' zero-elevation level, derived from observations by the Mars Orbiter Laser Altimeter on Mars Global Surveyor. Sunlight illuminates the scene from the upper left. The 10-kilometer scale bar is about 6.2 miles across.Click on image for larger view Additional information about Mars Global Surveyor is online at http://mars.jpl.nasa.gov/mgs/ [ http://mars.jpl.nasa.gov/mgs/ ]. The Jet Propulsion Laboratory, Pasadena, Calif., manages the Mars Global Surveyor mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. JPL's industrial partner is Lockheed Martin Space Systems, Denver, which built and operates the spacecraft., November 13, 2003 Details in a fan-shaped deposit discovered by NASA's Mars Global Surveyor orbiter provide evidence that some ancient rivers on Mars flowed for a long time, not just in brief, intense floods. The apron of debris filling the middle of this picture from the spacecraft's Mars Orbiter Camera is a hardened and eroded distributory fan, a type of geological feature that includes river deltas and alluvial fans. Sediments transported through valleys by water on early Mars formed the 13-kilometer-long (8-mile) deposit in the distant past, when it was still possible for liquid water to flow across the martian surface. Mars Orbiter Camera team members published discovery of this feature in the online edition of the journal Science. What is important about it? First, it provides unequivocal evidence that some valleys on Mars experienced persistent flow over considerable periods of time, as rivers do on Earth. Second, because the fan is today a deposit of sedimentary rock, it demonstrates that some sedimentary rocks on Mars were deposited in a liquid environment. Third, the fan's general shape, the pattern of its channels, and its low slopes provide circumstantial evidence that the feature was an actual delta -- that is, a deposit made when a river or stream enters a body of water. If so, this landform is a strong indicator that some craters and basins on Mars once held lakes. Hundreds of other locations on Mars where valleys enter craters and basins have been imaged by the Mars Orbiter Camera, but none has shown landforms like those presented here. The picture is a mosaic of images acquired between August 2000 and September 2003. The area covered 14 kilometer (8.7 miles) by 19.3 kilometers (12 miles). North is up. Sunlight illuminates the scene from the left. The spacecraft's narrow-angle camera takes grayscale images, the color added is based on information from a camera on Mars Odyssey. The fan is in an unnamed crater that is 64 kilometers (40 miles) in diameter, at 24.3 degrees south latitude, 33.5 degrees west longitude. The crater lies northeast of a larger one named Holden Crater. The fan is a fossil landform. That is, it is an eroded remnant of a somewhat larger and thicker deposit. The originally loose sediment was turned to rock and then eroded over time to present the features seen today. The channels through which sediment was transported are no longer present. Instead, only their floors remain, and these have been elevated by erosion so that former channels now stand as ridges. The floors of former channels became inverted in this way because they were more resistant to the forces of erosion, indicating they either were more strongly cemented than surrounding materials, or they have more coarse grains (which are harder to remove), or both. Closer looks at two portions of the fan show observations critical to the story. White boxes overlaid on the image show the locations of those two areas.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
Light-Toned Bedrock Along Cr …
PIA09190
Sol (our sun)
HiRISE
Title Light-Toned Bedrock Along Cracks as Evidence of Fluid Alteration
Original Caption Released with Image This enhanced-color image from the High Resolution Imaging Science Experiment Camera on NASA's Mars Reconnaissance Orbiter shows a landscape of sand dunes and buttes among a background of light-toned (tan-colored) bands and dark-toned (blue-colored) bands in the Candor Chasma region of Mars' Valles Marineris canyon system. The scene includes examples of thin dark lines bordered by light-toned bedrock [Figures 2A, 2B, and 2C]. The dark lines are interpreted as fractures, called joints, that were formerly underground but have been exposed at the surface by erosion of overlying material. The light-toned material along the joints is interpreted as features called halos, resulting from mineral alteration (bleaching, cementation or both) of the walls of the fractures by fluid moving through the fractures. The image was acquired on Sept. 30, 2006, during winter in Mars' southern hemisphere, at a local Mars time of 3:29 p.m. It combines separate band passes taken by the High Resolution Imaging Science Experiment in blue-green light, red light and near-infrared light. The scene is illuminated from the west (left) with a solar incidence angle of 58.5 degrees. The image scale is 26 centimeters (10 inches) per pixel, the scale of the red bandpass image. The other bandpasses were acquired with two-by-two pixel binning to 52 centimeters (20 inches) per pixel. The image, in the camera's catalogue as TRA_000836_1740, is centered at 5.7 degrees south latitude, 284.6 degrees east longitude. A locator map [Supplement 2] based on elevation data from the Mars Orbiter Laser Altimeter on NASA's Mars Global Surveyor indicates this location in the context of the Candor Chasma region. A full resolution file of this image is available for download by clicking here (82 MB). A subframe of the full image [Figure 1] shows the locations of smaller pull-outs selected for showing details of interest. Supplement 3 shows light-toned and dark-toned layers. Meter-scale dune forms are commonly observed within the dark layers. Also shown are joints and surrounding halos. In contrast to Figure 2, the halos along these joints are laterally more extensive and less localized along the trace of the joint. Supplement 4 shows two streamlined mesas of layered bedrock. The windward slopes of these mesas appear smooth, consistent with wind erosion. Boulders are common along the northwest slopes of the mesas. The horizontal spacing of joints appears to control the lateral dimensions of many of the largest boulders. Supplement 5, shows a high-density population of joints. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, is the prime contractor for the project and built the spacecraft. The High Resolution Imaging Science Experiment is operated by the University of Arizona, Tucson, and the instrument was built by Ball Aerospace and Technology Corp., Boulder, Colo.
TOPEX/El Niño Watch - Strong …
PIA02935
Sol (our sun)
Altimeter
Title TOPEX/El Niño Watch - Strong, Long-lasting La Niña Just Fading Away, June 19, 2000
Original Caption Released with Image ."Let's not forget that the legacy of two years of La Niña will be with us this summer and into the fall," said JPL oceanographer Dr. William Patzert. "Much of the nation's farmland is really dry in many regions. The reality is that the atmosphere is still acting as though La Niña remains." The National Oceanic and Atmospheric Administration's (NOAA) National Weather Service has forecasted continuing drought for much of the midwestern and southeastern United States and an active hurricane season for our coming summer. NOAA seasonal forecasts can be found at http://www.cpc.ncep.noaa.gov [ http://www.cpc.ncep.noaa.gov ] . The U.S.-French TOPEX/Poseidon mission is managed by JPL for the NASA's Earth Science Enterprise, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. For more information on the TOPEX/Poseidon project, see http://topex-www.jpl.nasa.gov [ http://topex-www.jpl.nasa.gov ], After dominating the tropical Pacific Ocean for more than two years, the 1998-2000 La Niña "cool pool" is continuing its slow fade and seems to be retiring from the climate stage, according to the latest satellite data from the U.S.-French TOPEX/Poseidon mission. These data, taken during a 10-day cycle of collection ending June 9, show that the equatorial Pacific continues to warm up and is returning to normal (green) as this latest, persistent, two-year La Niña episode is coming to an end. Only a few patches of cooler, lower sea levels (seen in blue and purple) remain across the tropics. It should be noted that in June 1999, La Niña barely had a pulse, but was resuscitated in fall 1999. (See June 1999 press release on that topic at http://www.jpl.nasa.gov/elnino/990629.html [ http://www.jpl.nasa.gov/elnino/990629.html ] .) The blue areas are between 5 and 13 centimeters (2 and 5 inches) below normal, whereas the purple areas range from 14 to 18 centimeters (6 to 7 inches) below normal. In the far-western tropical Pacific Ocean, the ocean remains higher and warmer than normal. In summary, it appears that the global climate system is finally emerging from the past three years of dramatic swings from the extra-large El Niño of 1997/1998, which was followed by two unusually cool and persistent La Niña years, according to scientists at NASA's Jet Propulsion Laboratory. But as the northern hemisphere summer begins, above-normal sea surface heights and warmer ocean temperatures (indicated by the red and white areas) still blanket the western equatorial Pacific and much of the north and south mid-Pacific. Red areas are about 10 centimeters (4 inches) above normal, white areas show the sea surface height is between 14 and 32 centimeters (6 to 13 inches) above normal. This contrasts with the Bering Sea and Gulf of Alaska region southward along the western coast of North America, where lower-than-normal sea levels and cool ocean temperatures continue, although this pattern is also weakening. A possible switch in this larger-than-El Niño/La Niña, slower-changing pattern -- the Pacific Decadal Oscillation -- was first noticed by many scientists in late 1998. See a January 2000 press release on that topic at http://www.jpl.nasa.gov/elnino/20000118.html [ http://www.jpl.nasa.gov/elnino/20000118.html ] , or for further information and graphics about the Pacific Decadal Oscillation, see http://topex-www.jpl.nasa.gov/discover/PDO.html [ http://topex-www.jpl.nasa.gov/discover/PDO.html ]
TOPEX El Niño/La Niña - Enti …
PIA01528
Sol (our sun)
Altimeter
Title TOPEX El Niño/La Niña - Entire Pacific is out of Whack, April 7, 1999
Original Caption Released with Image New sea surface height measurements from the TOPEX/Poseidon satellite show that the sea level and temperature of the entire Pacific is "out of balance," including a large area of abnormally cool water along the west coast of North America that scientists say will influence regional weather patterns along the west coast of the Americas this summer. Southern California's seasonal "June gloom" weather, caused by a marine layer that traps smog over the Los Angeles basin, may linger throughout the summer as a result, according to oceanographer Dr. William Patzert of JPL. "Our data certainly show that the unusual oceanic climatic conditions that gave rise to El Niño and La Niña are not returning to a normal state." he said. "Our planet's climate system continues to exhibit rather wild behavior. These large warm and cold, high and low sea levels are slow-developing and long-lasting, and will certainly influence global climate and weather for the coming summer and into next fall." The unusually cool water (areas of lower sea level shown in blue and purple) extends from the Gulf of Alaska along the North American coast, sweeping south-westward from Baja California, where it merges with the remnants of La Niña. The La Niña phenomenon's cool, lower sea levels across the equator continue to weaken and break into (purple) patches. The northwest Pacific continues to be warmer than normal, though the variations from normal are not as great as in recent months. Areas where the Pacific Ocean is normal appear in green. The data represented in the image were collected from May 12-22. TOPEX/Poseidon's sea-surface height measurements have provided scientists with a detailed view of the 1998-99 La Niña and the 1997-98 El Niño because the satellite's altimeter measures the changing sea-surface height with unprecedented precision. In this image, the purple areas are about 18 centimeters (7 inches) below normal, creating a deficit in the heat supply to the surface waters. The white areas show the sea surface is between 14 and 32 centimeters (6 to 13 inches) above normal, in the red areas, it's about 10 centimeters (4 inches) above normal. The TOPEX/Poseidon mission is managed by the Jet Propulsion Laboratory for NASA s Office of Earth Science, Washington, DC. JPL is a division of the California Institute of Technology, Pasadena, CA. For more information, please visit the TOPEX/Poseidon project web page at http://topex-www.jpl.nasa.gov
TOPEX/El Niño Watch - Los Ni …
PIA02969
Sol (our sun)
Altimeter
Title TOPEX/El Niño Watch - Los Niños may be Gone, But Pacific Pattern Remains August 14, 2000
Original Caption Released with Image After three years of El Niño and La Niña with their often devastating climate consequences, the Pacific is finally calming down in the tropics but still shows signs of being abnormal elsewhere, according to the latest satellite data from the U.S.-French TOPEX/Poseidon mission. These data, taken during a 10-day cycle of collection ending August 17, show that tropical Pacific sea levels, which indicate how much heat is stored in the ocean, have returned to near-normal (green) after three years of dramatic fluctuations. See http://www.jpl.nasa.gov/elnino/ . But as summer ends in the Northern Hemisphere, remnants of the past few years remain embedded in the upper ocean. Above-normal sea surface heights and warmer ocean temperatures (indicated by the red and white areas) still blanket the far-western tropical Pacific and much of the north (and south) mid-Pacific. Red areas are about 10 centimeters (4 inches) above normal, white areas show the sea surface height is between 14 and 32 centimeters (6 to 13 inches) above normal. This contrasts with the Bering Sea and Gulf of Alaska where lower-than-normal sea levels and cool ocean temperatures continue (indicated by blue areas), although this pattern is also weakening. The blue areas are between 5 and 13 centimeters (2 and 5 inches) below normal, whereas the purple areas range from 14 to 18 centimeters (6 to 7 inches) below normal. Looking at the entire Pacific basin, the Pacific Decadal Oscillation's (PDO) characteristic warm horseshoe and cool wedge pattern is still evident in this sea-level height image. The PDO is a long-term ocean temperature fluctuation of the Pacific Ocean that waxes and wanes approximately every 10 to 20 years. Most recent National Oceanic and Atmospheric Administration (NOAA) sea-surface temperature date also clearly illustrate the persistence of this basin-wide pattern. They are available at: http://psbsgi1.nesdis.noaa.gov:8080/PSB/EPS/SST/climo.html."The present calming started three to four months ago when the La Niña faded away," said oceanographer Dr. William Patzert of NASA's Jet Propulsion Laboratory, Pasadena, Calif. "It appears that the global climate system is finally recovering from the past three years of dramatic swings from the extra-large El Niño of 1997/1998, which was followed by two unusually cool and persistent La Niña years.""The good news is that we're finally out from under the El Niño and La Niña of the past three years," Patzert said. "Unfortunately, in the longer term, the reality is that the PDO pattern still dominates the Pacific and, in the short term, the atmosphere is still acting as though La Niña remains. The western United States continues hot and dry, and a larger than normal number of hurricanes are forecast by NOAA for both the Pacific and the Atlantic. Also for the remainder of the summer and into the fall, we are continuing to experience the legacy or hangover from El Niño and La Niña -- the devastating Western U.S. fires from the, Canadian to Mexican borders are one example." National Oceanic and Atmospheric Administration's (NOAA) National Weather Service has forecasted continuing heat in the Western United States and an active hurricane season for the end of summer and into the fall. NOAA seasonal forecasts can be found at: http://www.cpc.ncep.noaa.gov. This month marks the eighth anniversary of the launch of TOPEX/Poseidon, a mission that had been planned to last only three to five years. The satellite has orbited Earth more than 37,400 times and completed 290 10-day data collection cycles. More than 99 percent of all available mission data has been collected and archived by the operations team at JPL. The U.S.-French TOPEX/Poseidon mission is managed by JPL for the NASA's Earth Science Enterprise, Washington, D.C. JPL is a division of the California Institute of Technology in Pasadena. For more information on the TOPEX/Poseidon project, see http://topex-www.jpl.nasa.gov [ http://topex-www.jpl.nasa.gov ]
TOPEX/El Niño Watch - La Niñ …
PIA01526
Sol (our sun)
Altimeter
Title TOPEX/El Niño Watch - La Niña Hangs On, February 27, 1999
Original Caption Released with Image Propulsion Laboratory for NASA's Office of Earth Science, Washington, DC. JPL is a division of the California Institute of Technology, Pasadena, CA., The cold pool of water in the Pacific known as "La Niña" still persists, although it is slowly weakening, according to scientists studying new data from the U.S.-French TOPEX/Poseidon satellite. A new image, produced using sea-surface height measurements taken by the satellite, is available on the Internet at http://www.jpl.nasa.gov/elnino/. It shows sea-surface height on February 27, 1999 relative to normal ocean conditions, reflecting the heat content of the ocean. The low sea level or cold pool of water along the equator (shown in purple and blue), commonly referred to as La Niña, still dominates the equatorial Pacific Ocean. This La Niña, which first appeared in May through June 1998, still persists, although it is slowly weakening, scientists say. Given its persistence and present strength, the ocean cooling trend is expected to continue to exert a strong influence on global climate systems throughout the spring and into the early summer. This situation is similar to the 1997-1998 El Niño, which extended into early summer 1998. The world's oceans are the great reservoirs of heat that influence global climate because they can cool or heat the atmosphere above. This transfer of heat drives weather patterns across both land and sea. La Niña provides a physical link connecting the large, slow changes in the ocean with predictable changes in day-to-day weather."La Niña shifts the high-altitude weather highway known as the jet stream," said Dr. William Patzert, an oceanographer at NASA's Jet Propulsion Laboratory. "It funnels storm tracks to the Pacific Northwest, which has resulted in heavy rainfall and lots of snow in that region so far, as well as the upper Midwest. Much of the Southwest, by contrast, has been shielded from stormy weather and, as a result, has received significantly less precipitation than normal to date. This year's La Niña was average in its intensity, but at its peak, it was associated with a 15 to 20-centimeter deep trough (6 to 8 inches) in the central tropical Pacific," Patzert said. "The depression was correlated with a 2 to 3-degree Centigrade (about 3.5 to 5.5 degrees Fahrenheit) dip in normal ocean surface temperatures." The image also shows that the very large, unusual area of higher or warmer water (shown here in red and white) in the western Pacific Ocean, from the tropics to the Gulf of Alaska, continues to expand. Although the appearance of this feature is not fully understood, it is recognized as influential to overall weather and climate. The white areas in the image indicate that the sea-surface height is between 14 and 32 centimeters (6 to 13 inches) above normal, in the red areas, sea-surface height is about 10 centimeters (4 inches) above normal. The green areas indicate normal conditions. The purple areas are between 14 to 18 centimeters (6 to 7 inches) below normal, and the blue areas are between 5 to 13 centimeters (2 to 5 inches) below normal. The TOPEX/Poseidon mission is managed by the Jet
TOPEX/El Niño Watch - La Niñ …
PIA01586
Sol (our sun)
Altimeter
Title TOPEX/El Niño Watch - La Niña Barely Has a Pulse, June 18, 1999
Original Caption Released with Image Lingering just a month ago in the eastern Pacific Ocean, the La Niña phenomenon, with its large volume of chilly water, barely has a pulse this month, according to new satellite data from the U.S.-French TOPEX/Poseidon mission. The data, taken during a 10-day cycle of data collection ending June 18, show that the equatorial Pacific Ocean is warming up and returning to normal (green) as La Niña all but vanishes. The warming trend is most apparent in the equatorial Pacific Ocean, where only a few patches of cooler, low sea levels (seen in blue and purple) remain. The blue areas are between 5 and 13 centimeters (2 and 5 inches) below normal, whereas the purple areas range from 14 to 18 centimeters (6 to 7 inches) below normal. Like its counterpart, El Niño, a La Niña condition will influence global climate and weather until it has completely subsided. As summer begins in the northern hemisphere, lower-than-normal sea surface levels and cool ocean temperatures persist in the northeastern Gulf of Alaska and along the western coast of North America. In contrast, the trend is the opposite over most of the Pacific, where above-normal sea surface heights and warmer ocean temperatures (indicated by the red and white areas) appear to be increasing and dominating the overall Pacific Ocean. Red areas are about 10 centimeters (4 inches) above normal, white areas show the sea surface height is between 14 and 32 centimeters (6 and 13 inches) above normal. Scientists are not ready to administer last rites to La Niña, though. In the last 12 months, the pool of unusually cold water in the Pacific has shrunk (warmed) several times before cooling (expanding) again. This summer's altimeter data will help them determine whether La Niña has truly dissipated or whether they will see another resurgence of cool water in the Pacific. The TOPEX/Poseidon mission is managed by the Jet Propulsion Laboratory for NASA's Office of Earth Science, Washington, DC. JPL is a division of the California Institute of Technology, Pasadena, CA. For more information, please visit the TOPEX/Poseidon project web page at http://topex-www.jpl.nasa.gov/ [ http://topex-www.jpl.nasa.gov/ ]
Pacific Shows Signs of Morph …
PIA09208
Sol (our sun)
Altimeter
Title Pacific Shows Signs of Morphing From Warm El Nino To Cool La Nina
Original Caption Released with Image New data of sea-level heights from early February, 2007, by the Jason altimetric satellite show that the tropical Pacific Ocean has transitioned from a warm (El Niño) to a cool (La Niña) condition during the prior two months. The beginnings of a possible La Niña are indicated by the blue area (in the center of the image along the equator) of lower than normal sea level (cold water). It is not certain yet if this current cooling trend will eventually evolve into a long-lasting, well-developed La Niña. "La Niña could send an already parched Western United States to its knees," said JPL oceanographer Dr. Bill Patzert. "In the Southwest, we call La Niña the little lady with the big dry punch." A La Niña situation often follows an El Niño episode and is essentially the opposite of an El Niño condition. During a La Nina, trade winds are stronger than normal, and the cold water that normally exists along the coast of South America extends to the central equatorial Pacific. A La Niña situation changes global weather patterns and is associated with less moisture in the air, resulting in less rain along the coasts of North and South America. Jason will continue to track this developing switch in the climate. This image of the Pacific Ocean was produced using sea-surface height measurements taken by the U.S.-French Jason satellite. The image is based on the average of 10 days of data centered on February 12, 2007, compared to the long-term average of observations from 1993 through 2005. In this image, places where the Pacific sea surface height is higher (warmer) than normal are yellow and red, and places where the sea surface is lower (cooler) than normal are blue and purple. Green shows where conditions are near normal. Sea-surface height is an indicator of the heat content of the upper ocean. NASA's Jet Propulsion Laboratory manages the U.S. portion of the U.S./French Jason mission for NASA's Science Mission Directorate, Washington, D.C. JPL is a division of the California Institute of Technology, Pasadena, Calif. For more information on NASA's ocean surface topography missions, see http://sealevel.jpl.nasa.gov/ [ http://sealevel.jpl.nasa.gov/ ] or to view the latest Jason data see http://sealevel.jpl.nasa.gov/science/jason1-quick-look/ [ http://sealevel.jpl.nasa.gov/science/jason1-quick-look/ ].
TOPEX El Niño/La Niña -La Ni …
PIA00031
Sol (our sun)
Altimeter
Title TOPEX El Niño/La Niña -La Niña Begins to Fade, April 7, 1999
Original Caption Released with Image The cold pool of water in the Pacific known as "La Niña" is beginning to fade, but ocean conditions have not returned to normal, according to scientists studying new images from the U.S.-French TOPEX/Poseidon satellite. New imagery of sea-surface heights taken this month by the ocean-observing satellite show cooler temperatures and lower sea levels across the equatorial Pacific Ocean (seen in blue and purple in the center of the image) are diminishing, which indicates that the equatorial Pacific is slowly returning to normal. However, in the north and south Pacific Ocean, temperatures and sea level remain high (seen in red and white), a pattern that began many months ago. In a nutshell, this means that although La Niña is fading, heat distribution in the Pacific Ocean remains dramatically out of balance. The TOPEX/Poseidon mission is managed by the Jet Propulsion Laboratory for NASA s Office of Earth Science, Washington, DC. JPL is a division of the California Institute of Technology, Pasadena, CA. For more information, please visit the TOPEX/Poseidon project web page at http://topex-www.jpl.nasa.gov
Proposed Mars Polar Lander L …
PIA02318
Sol (our sun)
Title Proposed Mars Polar Lander Landing Site (Perspective View 3)
Original Caption Released with Image This three-dimensional perspective view of the Martian polar layered terrain was created by combining Viking images with Mars Global Surveyor Mars Orbiter Laser Altimeter measurements of the height of the surface. A bright blue ellipse indicates the landing location of the landing site. The ellipse is 5 kilometers wide and 90 kilometers long. . The landing site is located at latitude 76 degrees South, longitude 195 degrees West. Launched Jan. 3, Mars Polar Lander will set down gently on the Red Planet Dec. 3 for the start of a three-month mission to help scientists study the planet's climate history. Polar Lander was launched toward a Colorado-sized area at about 75 degrees south latitude on Mars. Mission planners have been reviewing images and three-dimensional topographic measurements from NASA's orbiting Mars Global Surveyor mission to pick a safe and scientifically interesting spot to land. Piggybacking on the Polar Lander are two basketball-sized aeroshells containing the Deep Space 2 microprobes. Part of NASA's New Millennium program, which tests risky new technologies for future science missions, these two grapefruit-sized penetrators will smash into Mars at about 400 mph and search for signs of water ice about 3 feet below the surface. Mars Polar Lander and its companion mission, the Mars Climate Orbiter, make up the second wave of spacecraft in the long-term Mars Surveyor Program, which is managed by the Jet Propulsion Laboratory for NASA's Office of Space Science. JPL's industrial partner in the development and operation of the Mars Global Surveyor, Polar Lander, and Climate Orbiter spacecraft is Lockheed Martin Astronautics, Denver, CO. JPL is a division of the California Institute of Technology, Pasadena, CA. For additional information about the Mars Surveyor 1998 Project, please visit our website at:http://mars.jpl.nasa.gov/msp98/lander/launch.html [ http://mars.jpl.nasa.gov/msp98/lander/launch.html ] To view additional MOC images, please visit the MSSS website at http://www.msss.com For additional information on MOLA, please visit our website at: http://ltpwww.gsfc.nasa.gov/tharsis/98lander.html [ http://ltpwww.gsfc.nasa.gov/tharsis/98lander.html ]
Proposed Mars Polar Lander L …
PIA02316
Sol (our sun)
Title Proposed Mars Polar Lander Landing Site (Perspective View 1)
Original Caption Released with Image This three-dimensional perspective view of the Martian polar layered terrain was created by combining Viking images with Mars Global Surveyor Mars Orbiter Laser Altimeter measurements of the height of the surface. A bright blue ellipse indicates the landing location of the landing site. The ellipse is 5 kilometers wide and 90 kilometers long. . The landing site is located at latitude 76 degrees South, longitude 195 degrees West. Launched Jan. 3, Mars Polar Lander will set down gently on the Red Planet Dec. 3 for the start of a three-month mission to help scientists study the planet's climate history. Polar Lander was launched toward a Colorado-sized area at about 75 degrees south latitude on Mars. Mission planners have been reviewing images and three-dimensional topographic measurements from NASA's orbiting Mars Global Surveyor mission to pick a safe and scientifically interesting spot to land. Piggybacking on the Polar Lander are two basketball-sized aeroshells containing the Deep Space 2 microprobes. Part of NASA's New Millennium program, which tests risky new technologies for future science missions, these two grapefruit-sized penetrators will smash into Mars at about 400 mph and search for signs of water ice about 3 feet below the surface. Mars Polar Lander and its companion mission, the Mars Climate Orbiter, make up the second wave of spacecraft in the long-term Mars Surveyor Program, which is managed by the Jet Propulsion Laboratory for NASA's Office of Space Science. JPL's industrial partner in the development and operation of the Mars Global Surveyor, Polar Lander, and Climate Orbiter spacecraft is Lockheed Martin Astronautics, Denver, CO. JPL is a division of the California Institute of Technology, Pasadena, CA. For additional information about the Mars Surveyor 1998 Project, please visit our website at:http://mars.jpl.nasa.gov/msp98/lander/launch.html [ http://mars.jpl.nasa.gov/msp98/lander/launch.html ] To view additional MOC images, please visit the MSSS website at http://www.msss.com For additional information on MOLA, please visit our website at: http://ltpwww.gsfc.nasa.gov/tharsis/98lander.html [ http://ltpwww.gsfc.nasa.gov/tharsis/98lander.html ]
Proposed Mars Polar Lander L …
PIA02317
Sol (our sun)
Title Proposed Mars Polar Lander Landing Site (Perspective View 2)
Original Caption Released with Image This three-dimensional perspective view of the Martian polar layered terrain was created by combining Viking images with Mars Global Surveyor Mars Orbiter Laser Altimeter measurements of the height of the surface. A bright blue ellipse indicates the landing location of the landing site. The ellipse is 5 kilometers wide and 90 kilometers long. . The landing site is located at latitude 76 degrees South, longitude 195 degrees West. Launched Jan. 3, Mars Polar Lander will set down gently on the Red Planet Dec. 3 for the start of a three-month mission to help scientists study the planet's climate history. Polar Lander was launched toward a Colorado-sized area at about 75 degrees south latitude on Mars. Mission planners have been reviewing images and three-dimensional topographic measurements from NASA's orbiting Mars Global Surveyor mission to pick a safe and scientifically interesting spot to land. Piggybacking on the Polar Lander are two basketball-sized aeroshells containing the Deep Space 2 microprobes. Part of NASA's New Millennium program, which tests risky new technologies for future science missions, these two grapefruit-sized penetrators will smash into Mars at about 400 mph and search for signs of water ice about 3 feet below the surface. Mars Polar Lander and its companion mission, the Mars Climate Orbiter, make up the second wave of spacecraft in the long-term Mars Surveyor Program, which is managed by the Jet Propulsion Laboratory for NASA's Office of Space Science. JPL's industrial partner in the development and operation of the Mars Global Surveyor, Polar Lander, and Climate Orbiter spacecraft is Lockheed Martin Astronautics, Denver, CO. JPL is a division of the California Institute of Technology, Pasadena, CA. For additional information about the Mars Surveyor 1998 Project, please visit our website at:http://mars.jpl.nasa.gov/msp98/lander/launch.html [ http://mars.jpl.nasa.gov/msp98/lander/launch.html ] To view additional MOC images, please visit the MSSS website at http://www.msss.com For additional information on MOLA, please visit our website at: http://ltpwww.gsfc.nasa.gov/tharsis/98lander.html [ http://ltpwww.gsfc.nasa.gov/tharsis/98lander.html ]
MGS MOC Coverage of Mars Pol …
PIA02310
Sol (our sun)
Mars Orbiter Camera
Title MGS MOC Coverage of Mars Polar Lander Region
Original Caption Released with Image . The selection criteria were to find a place that was relatively flat and relatively smooth, but which displayed characteristics of the south polar layered materials. The inset (upper left) shows the location of the landing zone with respect to the south polar residual (year-round) ice cap. The base map used here is a mosaic of Viking Orbiter images from the U.S. Geological Survey. Malin Space Science Systems and the California Institute of Technology built the MOC using spare hardware from the Mars Observer mission. MSSS operates the camera from its facilities in San Diego, CA. The Jet Propulsion Laboratory's Mars Surveyor Operations Project operates the Mars Global Surveyor spacecraft with its industrial partner, Lockheed Martin Astronautics, from facilities in Pasadena, CA and Denver, CO., High-resolution views of the Mars Polar Lander [ http://www.marspolarlander.com/ ] landing zone were essential to the selection of a safe place for the December 3, 1999, landing to occur. The Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) took its first pictures of the landing zone in December 1997 [ http://www.msss.com/mars_images/3_9_98_release/7200/index.html ] and January 1998 [ http://www.msss.com/mars_images/3_9_98_release/9500/index.html ]. After that time, the south polar region was not accessible to the camera until June 1999, when the south polar winter was ending and the sun began to dawn on this region once again. Since the beginning of June 1999, an intense period of imaging has been conducted over the landing zone so that a safe site could be found. The final site has now been identified, and the pictures shown here give some idea of what the Mars Polar Lander will encounter a little more than three months from now. This figure shows the zone originally proposed by the Mars Volatiles and Climate Surveyor (MVACS) [ http://mvacs.ess.ucla.edu/ ] science team for the Mars Polar Lander mission, which spanned the region from 72° to 78°S latitude and 170° to 230°W longitude. The thin white boxes and lines crossing the proposed zone outline MOC images taken between the first week in June 1999 and the first week in August 1999. The longest images were taken at 12 by 18 meters (39 by 59 feet) per pixel, there are three sets of long images, each taken during a given week in June as the terminator (the line separating "night" from "day") moved south across the landing zone. Smaller swaths represent images at higher resolution. The best resolution so far achieved is about 4 meters (13 ft) per pixel, better images will be taken in September and October as the sun rises farther and the surface becomes better illuminated. This figure shows the location of the primary (blue) and secondary (white) landing ellipses, which were selected on the basis of interpretation of the MGS data, in particular data from the Mars Orbiter Laser Altimeter [ http://ltpwww.gsfc.nasa.gov/tharsis/98lander.html ] and the Mars Orbiter Camera [ http://www.msss.com/mars_images/index.html ]
Procedure for Finding New Im …
PIA09021
Sol (our sun)
Mars Orbiter Camera
Title Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera
Original Caption Released with Image ), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ].
Procedure for Finding New Im …
PIA09021
Sol (our sun)
Mars Orbiter Camera
Title Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera
Original Caption Released with Image ), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ].
Procedure for Finding New Im …
PIA09021
Sol (our sun)
Mars Orbiter Camera
Title Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera
Original Caption Released with Image ), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ].
Procedure for Finding New Im …
PIA09021
Sol (our sun)
Mars Orbiter Camera
Title Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera
Original Caption Released with Image ), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ].
Procedure for Finding New Im …
PIA09021
Sol (our sun)
Mars Orbiter Camera
Title Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera
Original Caption Released with Image ), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ].
Procedure for Finding New Im …
PIA09021
Sol (our sun)
Mars Orbiter Camera
Title Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera
Original Caption Released with Image ), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ].
Procedure for Finding New Im …
PIA09021
Sol (our sun)
Mars Orbiter Camera
Title Procedure for Finding New Impact Sites on Mars Using the Mars Global Surveyor Mars Orbiter Camera
Original Caption Released with Image ), the Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) science operations team considered it possible to find more such impact sites using the MOC red wide angle camera. The most recent, freshest craters would be expected to be quite small, ranging from a few meters across to maybe a few hundred meters or so, at most, in diameter (100 meters is about 109 yards, compare that with a 100 yard U.S.-style football field). Something less than 100 meters across would not show up easily in a 240 meters per pixel red wide angle image. But the 6 January 2006 image showed that it could, because these small impacts, if they occur in an area thickly mantled with dust, will create a much larger "blast zone" around them. Thus, the MOC science operations team set out to image a few of the dustiest regions on Mars -- Tharsis, Amazonis, and Arabia -- with the red wide angle camera. The same camera had, in May and early June 1999, already imaged most of the planet at about 240 meters per pixel scale. By repeating areas already imaged in May/June 1999 during the January/March 2006 timeframe, we would be able to identify more dark spots. And, so, that is what we did. The Tharsis, Amazonis, and Arabia regions were re-imaged using the MOC red wide angle camera during January through March 2006. The data covered about 21,506,000 square kilometers (~8.3 million square miles, ~1/3 the surface area of Mars and more than twice the area of the United States). As each picture was received on Earth, we compared it with the images acquired during May/June 1999. Over the entire area surveyed, we found 39 dark spots that were present in early 2006 but not visible in May/June 1999. The 39 dark spots, then, were the candidate impact sites. Each one of these became a target for the MOC narrow angle camera, which would be used to take an image of about 1.5 meters (4.9 feet) per pixel of each site. The targets were entered into the MOC database. Then, as the predicted MGS ground track came near each site, the MOC team targeted an image by working with the spacecraft engineers at Lockheed Martin Astronautics (Denver, Colorado) and the Caltech/Jet Propulsion Laboratory (JPL, Pasadena, California) to point the spacecraft and camera at each site using the Roll Only Targeted Observation (ROTO) maneuver. Of the 39 dark spots, 20 turned out to be fresh impact sites, and 19 of them were not. The other 19 included mistaken identifications (one was a transient, large dust devil shadow, several were craters that had been present in earlier images but had changed in brightness owing to dust removal), new dark wind streaks, and new dark slope streaks created by avalanching dust on steep slopes. Some of the 20 new impact sites received further attention, as the spacecraft and MOC were used to obtain cPROTO (compensated Pitch and Roll Targeted Observations) views that have a spatial resolution of 0.5 meters (1.6 feet) in the downtrack dimension and 1.5 meters (4.9 feet) in the cross, Having realized that a new dark spot on Mars, seen in a red wide angle camera image acquired on 6 January 2006, might be an indication of a recent meteor impact site (see PIA09020 [ http://photojournal.jpl.nasa.gov/catalog/PIA09020 ] or MOC2-1611 [ http://www.msss.com/mars_images/moc/2006/12/06/craters/site1/index.html ], track direction. The cPROTO views, where obtained, have a higher resolution and better signal-to-noise ratio than the original ROTO images. Finally, while our approach of comparing MOC red wide angle camera images obtained in May/June 1999 with those obtained in January/March 2006 constrains the 20 craters all to having formed during the May 1999 to March 2006 time interval, we found in all cases that there were already other images that had been received on Earth that helped constrain the time of the impact more tightly. In some cases, the date of the impact could be pinned down to within a month or two, in other cases the interval covered several years. Data from the MGS MOC, Mars Odyssey Thermal Emission Imaging System (THEMIS) [ http://themis.asu.edu/ ], and Mars Express High Resolution Stereo Camera (HRSC) [ http://berlinadmin.dlr.de/Missions/express/indexeng.shtml ], were all employed in the search. Shown on this page (above) are pictures that illustrate our work to find new impact craters: Figure A: This picture shows one of the new impact sites identified by the MOC team. Located in northern Arabia Terra near 29.3°N, 333.2°W, the actual crater is quite small, only 11.2 ± 3.0 meters in diameter. This is a sub-frame of MOC image S16-01105, acquired using a ROTO maneuver on 12 March 2006. Figures B and C: These pictures are MOC red wide angle camera images, obtained at a scale of about 240 meters per pixel, of portions of Arabia Terra. Figure B is M01-01610 and was acquired during the MOC Geodesy Campaign (see PIA02022 and PIA02023, or MOC2-127) on 14 May 1999. Figure C, MOC S14-02741, was obtained on 26 January 2006 as part of the campaign to find new impact craters. By comparing the two images, one from 1999 and one from 2006, we were able to identify all new dark spots that formed during that interval. In this case, the new dark spot seen in the 2006 image, S14-02741, is inside the white circle. The same location is also indicated by a circle in the May 1999 image, but no dark spot is present there. In both cases, the white circle is about 12 km (7.5 mi) across. Figure D: This map of Mars, showing the location of all the MOC red wide angle camera images acquired for the search for new craters during January through March 2006. These images cover most of Amazonis, Tharsis, and Arabia Terra. The base map is a product that combines the May/June 1999 MOC red wide angle data (plus later data for the south polar region) and laser altimeter data from MGS. Figure E: This picture shows portions of two red wide angle camera context images that more tightly constrain when the new crater shown here (above, top, left) formed. The first picture, R05-00427, was acquired on 5 May 2003 and shows no dark spot at the site of the impact. The second picture, S05-01885, shows that the dark spot was present on 29 April 2005. Thus, these two images tell us that the impact occurred sometime between those dates: 5 May 2003 and 29 April 2005. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by the Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ].
New Gully Deposit in a Crate …
PIA09028
Sol (our sun)
Mars Orbiter Camera
Title New Gully Deposit in a Crater in the Centauri Montes Region
Original Caption Released with Image ). The second case, in an unnamed crater in the Centauri Montes region, east of the Hellas Basin, is described here. Gullies were first described by Mars Orbiter Camera scientists in June 2000, and many examples were presented in our June 2000 web releases and in a paper published in the journal Science. Additional examples of these middle and high-latitude landforms can be seen among the other more than 1,600 web releases. The new gully deposit in an unnamed crater in the Centauri Montes region is located near 38.7 degrees south latitude, 263.3 degrees west longitude. Like the new gully deposit in Terra Sirenum, this one has a light tone relative to its surroundings. It is on an equator-facing slope on which numerous narrow gully channels occur. As this slope is always in sunlight during the afternoons when Mars Global Surveyor passes overhead, the gullies always appear somewhat "washed out," just as craters on a full Moon do when viewed from Earth with a telescope. The new, light-toned flow was first noticed by the Mars Orbiter Camera science operations team in an image acquired on Sept. 10, 2005. Re-examination of other images of this crater showed that the new deposit had actually been present on Feb. 21, 2004, when the distal (down-slope) end of the deposit was captured in other images. In February 2004, the deposit had gone unnoticed because only a small portion of it was imaged. This location was first imaged by the Mars Orbiter Camera on Aug. 30, 1999. The deposit was not present at that time. Thus, it formed between Aug. 30, 1999 and Feb. 21, 2004. Roughly 20 percent brighter than the surface as it appeared before the flow occurred, the new deposit exhibits characteristics consistent with transport and deposition of a fluid that behaved like liquid water and likely transported some fine-grained sediment along with it. The distal end of the flow broke into several branches, or digits, and the material diverted and flowed around low obstacles. As with the example in Terra Sirenum, the depth of the flow is too thin to be measured in 1.5-meter-per-pixel (1.7-yard-per-pixel) images, so a very small volume of liquid and sediment was involved. While the material flowed and easily budded into several branches, it also must have moved slow enough to not topple over some of the low obstacles in its path. This picture is a colorized view of the light-toned gully deposit, draped over a topographic image derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment. Figure A: This figure shows the southeast wall of the unnamed crater in the Centauri Montes region, as it appeared in August 1999, and later in September 2005. No light-toned deposit was present in August 1999, but appeared by February 2004. The 300-meter scale bar represents 328 yards. Figure B: The second figure is a, Two Martian southern mid-latitude craters have new light-toned deposits that formed in gully settings during the course of the Mars Global Surveyor mission. Images from the Mars Orbiter Camera documented one case in an unnamed crater in Terra Sirenum, described in an accompanying release (see PIA09027 [ http://photojournal.jpl.nasa.gov/catalog/PIA09027 ] or MOC2-1618 [ http://www.msss.com/mars_images/moc/2006/12/06/gullies/sirenum_crater/index.html ], mosaic of several Mars Global Surveyor images, colorized using a table derived from Mars Reconnaissance Orbiter camera color data and overlain on a sub-frame of a Mars Odyssey Thermal Emission Imaging System image. The 1-kilometer scale bar represents about 0.62 miles. Figure C: The third figure is a colorized view of the light-toned gully deposit as viewed from an oblique perspective, draped over topography derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter camera. The new light-toned flow, by itself, does not prove that liquid water was involved in its genesis. However, this observation and the similar light-toned flow in Terra Sirenum together show that some gully sites are indeed changing today, providing tantalizing evidence there might be sources of liquid water beneath the surface of Mars right now. In both cases, these new flows may be indicating the locations of aquifers (subsurface rocks saturated with water) that could be detected by orbiting, ground-penetrating radar systems such as the Mars Express Mars Advanced Radar for Subsurface and Ionosphere Sounding or the Mars Reconnaissance Orbiter's Mars Shallow Subsurface Radar. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by NASA's Jet Propulsion Laboratory, Pasadena, Calif., a division of the California Institute of Technology, also in Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ].
New Gully Deposit in a Crate …
PIA09028
Sol (our sun)
Mars Orbiter Camera
Title New Gully Deposit in a Crater in the Centauri Montes Region
Original Caption Released with Image ). The second case, in an unnamed crater in the Centauri Montes region, east of the Hellas Basin, is described here. Gullies were first described by Mars Orbiter Camera scientists in June 2000, and many examples were presented in our June 2000 web releases and in a paper published in the journal Science. Additional examples of these middle and high-latitude landforms can be seen among the other more than 1,600 web releases. The new gully deposit in an unnamed crater in the Centauri Montes region is located near 38.7 degrees south latitude, 263.3 degrees west longitude. Like the new gully deposit in Terra Sirenum, this one has a light tone relative to its surroundings. It is on an equator-facing slope on which numerous narrow gully channels occur. As this slope is always in sunlight during the afternoons when Mars Global Surveyor passes overhead, the gullies always appear somewhat "washed out," just as craters on a full Moon do when viewed from Earth with a telescope. The new, light-toned flow was first noticed by the Mars Orbiter Camera science operations team in an image acquired on Sept. 10, 2005. Re-examination of other images of this crater showed that the new deposit had actually been present on Feb. 21, 2004, when the distal (down-slope) end of the deposit was captured in other images. In February 2004, the deposit had gone unnoticed because only a small portion of it was imaged. This location was first imaged by the Mars Orbiter Camera on Aug. 30, 1999. The deposit was not present at that time. Thus, it formed between Aug. 30, 1999 and Feb. 21, 2004. Roughly 20 percent brighter than the surface as it appeared before the flow occurred, the new deposit exhibits characteristics consistent with transport and deposition of a fluid that behaved like liquid water and likely transported some fine-grained sediment along with it. The distal end of the flow broke into several branches, or digits, and the material diverted and flowed around low obstacles. As with the example in Terra Sirenum, the depth of the flow is too thin to be measured in 1.5-meter-per-pixel (1.7-yard-per-pixel) images, so a very small volume of liquid and sediment was involved. While the material flowed and easily budded into several branches, it also must have moved slow enough to not topple over some of the low obstacles in its path. This picture is a colorized view of the light-toned gully deposit, draped over a topographic image derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment. Figure A: This figure shows the southeast wall of the unnamed crater in the Centauri Montes region, as it appeared in August 1999, and later in September 2005. No light-toned deposit was present in August 1999, but appeared by February 2004. The 300-meter scale bar represents 328 yards. Figure B: The second figure is a, Two Martian southern mid-latitude craters have new light-toned deposits that formed in gully settings during the course of the Mars Global Surveyor mission. Images from the Mars Orbiter Camera documented one case in an unnamed crater in Terra Sirenum, described in an accompanying release (see PIA09027 [ http://photojournal.jpl.nasa.gov/catalog/PIA09027 ] or MOC2-1618 [ http://www.msss.com/mars_images/moc/2006/12/06/gullies/sirenum_crater/index.html ], mosaic of several Mars Global Surveyor images, colorized using a table derived from Mars Reconnaissance Orbiter camera color data and overlain on a sub-frame of a Mars Odyssey Thermal Emission Imaging System image. The 1-kilometer scale bar represents about 0.62 miles. Figure C: The third figure is a colorized view of the light-toned gully deposit as viewed from an oblique perspective, draped over topography derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter camera. The new light-toned flow, by itself, does not prove that liquid water was involved in its genesis. However, this observation and the similar light-toned flow in Terra Sirenum together show that some gully sites are indeed changing today, providing tantalizing evidence there might be sources of liquid water beneath the surface of Mars right now. In both cases, these new flows may be indicating the locations of aquifers (subsurface rocks saturated with water) that could be detected by orbiting, ground-penetrating radar systems such as the Mars Express Mars Advanced Radar for Subsurface and Ionosphere Sounding or the Mars Reconnaissance Orbiter's Mars Shallow Subsurface Radar. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by NASA's Jet Propulsion Laboratory, Pasadena, Calif., a division of the California Institute of Technology, also in Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ].
New Gully Deposit in a Crate …
PIA09028
Sol (our sun)
Mars Orbiter Camera
Title New Gully Deposit in a Crater in the Centauri Montes Region
Original Caption Released with Image ). The second case, in an unnamed crater in the Centauri Montes region, east of the Hellas Basin, is described here. Gullies were first described by Mars Orbiter Camera scientists in June 2000, and many examples were presented in our June 2000 web releases and in a paper published in the journal Science. Additional examples of these middle and high-latitude landforms can be seen among the other more than 1,600 web releases. The new gully deposit in an unnamed crater in the Centauri Montes region is located near 38.7 degrees south latitude, 263.3 degrees west longitude. Like the new gully deposit in Terra Sirenum, this one has a light tone relative to its surroundings. It is on an equator-facing slope on which numerous narrow gully channels occur. As this slope is always in sunlight during the afternoons when Mars Global Surveyor passes overhead, the gullies always appear somewhat "washed out," just as craters on a full Moon do when viewed from Earth with a telescope. The new, light-toned flow was first noticed by the Mars Orbiter Camera science operations team in an image acquired on Sept. 10, 2005. Re-examination of other images of this crater showed that the new deposit had actually been present on Feb. 21, 2004, when the distal (down-slope) end of the deposit was captured in other images. In February 2004, the deposit had gone unnoticed because only a small portion of it was imaged. This location was first imaged by the Mars Orbiter Camera on Aug. 30, 1999. The deposit was not present at that time. Thus, it formed between Aug. 30, 1999 and Feb. 21, 2004. Roughly 20 percent brighter than the surface as it appeared before the flow occurred, the new deposit exhibits characteristics consistent with transport and deposition of a fluid that behaved like liquid water and likely transported some fine-grained sediment along with it. The distal end of the flow broke into several branches, or digits, and the material diverted and flowed around low obstacles. As with the example in Terra Sirenum, the depth of the flow is too thin to be measured in 1.5-meter-per-pixel (1.7-yard-per-pixel) images, so a very small volume of liquid and sediment was involved. While the material flowed and easily budded into several branches, it also must have moved slow enough to not topple over some of the low obstacles in its path. This picture is a colorized view of the light-toned gully deposit, draped over a topographic image derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment. Figure A: This figure shows the southeast wall of the unnamed crater in the Centauri Montes region, as it appeared in August 1999, and later in September 2005. No light-toned deposit was present in August 1999, but appeared by February 2004. The 300-meter scale bar represents 328 yards. Figure B: The second figure is a, Two Martian southern mid-latitude craters have new light-toned deposits that formed in gully settings during the course of the Mars Global Surveyor mission. Images from the Mars Orbiter Camera documented one case in an unnamed crater in Terra Sirenum, described in an accompanying release (see PIA09027 [ http://photojournal.jpl.nasa.gov/catalog/PIA09027 ] or MOC2-1618 [ http://www.msss.com/mars_images/moc/2006/12/06/gullies/sirenum_crater/index.html ], mosaic of several Mars Global Surveyor images, colorized using a table derived from Mars Reconnaissance Orbiter camera color data and overlain on a sub-frame of a Mars Odyssey Thermal Emission Imaging System image. The 1-kilometer scale bar represents about 0.62 miles. Figure C: The third figure is a colorized view of the light-toned gully deposit as viewed from an oblique perspective, draped over topography derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter camera. The new light-toned flow, by itself, does not prove that liquid water was involved in its genesis. However, this observation and the similar light-toned flow in Terra Sirenum together show that some gully sites are indeed changing today, providing tantalizing evidence there might be sources of liquid water beneath the surface of Mars right now. In both cases, these new flows may be indicating the locations of aquifers (subsurface rocks saturated with water) that could be detected by orbiting, ground-penetrating radar systems such as the Mars Express Mars Advanced Radar for Subsurface and Ionosphere Sounding or the Mars Reconnaissance Orbiter's Mars Shallow Subsurface Radar. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by NASA's Jet Propulsion Laboratory, Pasadena, Calif., a division of the California Institute of Technology, also in Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ].
New Gully Deposit in a Crate …
PIA09028
Sol (our sun)
Mars Orbiter Camera
Title New Gully Deposit in a Crater in the Centauri Montes Region
Original Caption Released with Image ). The second case, in an unnamed crater in the Centauri Montes region, east of the Hellas Basin, is described here. Gullies were first described by Mars Orbiter Camera scientists in June 2000, and many examples were presented in our June 2000 web releases and in a paper published in the journal Science. Additional examples of these middle and high-latitude landforms can be seen among the other more than 1,600 web releases. The new gully deposit in an unnamed crater in the Centauri Montes region is located near 38.7 degrees south latitude, 263.3 degrees west longitude. Like the new gully deposit in Terra Sirenum, this one has a light tone relative to its surroundings. It is on an equator-facing slope on which numerous narrow gully channels occur. As this slope is always in sunlight during the afternoons when Mars Global Surveyor passes overhead, the gullies always appear somewhat "washed out," just as craters on a full Moon do when viewed from Earth with a telescope. The new, light-toned flow was first noticed by the Mars Orbiter Camera science operations team in an image acquired on Sept. 10, 2005. Re-examination of other images of this crater showed that the new deposit had actually been present on Feb. 21, 2004, when the distal (down-slope) end of the deposit was captured in other images. In February 2004, the deposit had gone unnoticed because only a small portion of it was imaged. This location was first imaged by the Mars Orbiter Camera on Aug. 30, 1999. The deposit was not present at that time. Thus, it formed between Aug. 30, 1999 and Feb. 21, 2004. Roughly 20 percent brighter than the surface as it appeared before the flow occurred, the new deposit exhibits characteristics consistent with transport and deposition of a fluid that behaved like liquid water and likely transported some fine-grained sediment along with it. The distal end of the flow broke into several branches, or digits, and the material diverted and flowed around low obstacles. As with the example in Terra Sirenum, the depth of the flow is too thin to be measured in 1.5-meter-per-pixel (1.7-yard-per-pixel) images, so a very small volume of liquid and sediment was involved. While the material flowed and easily budded into several branches, it also must have moved slow enough to not topple over some of the low obstacles in its path. This picture is a colorized view of the light-toned gully deposit, draped over a topographic image derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment. Figure A: This figure shows the southeast wall of the unnamed crater in the Centauri Montes region, as it appeared in August 1999, and later in September 2005. No light-toned deposit was present in August 1999, but appeared by February 2004. The 300-meter scale bar represents 328 yards. Figure B: The second figure is a, Two Martian southern mid-latitude craters have new light-toned deposits that formed in gully settings during the course of the Mars Global Surveyor mission. Images from the Mars Orbiter Camera documented one case in an unnamed crater in Terra Sirenum, described in an accompanying release (see PIA09027 [ http://photojournal.jpl.nasa.gov/catalog/PIA09027 ] or MOC2-1618 [ http://www.msss.com/mars_images/moc/2006/12/06/gullies/sirenum_crater/index.html ], mosaic of several Mars Global Surveyor images, colorized using a table derived from Mars Reconnaissance Orbiter camera color data and overlain on a sub-frame of a Mars Odyssey Thermal Emission Imaging System image. The 1-kilometer scale bar represents about 0.62 miles. Figure C: The third figure is a colorized view of the light-toned gully deposit as viewed from an oblique perspective, draped over topography derived from Mars Global Surveyor's Mars Orbiter Laser Altimeter data. The color comes from a table derived from the colors of Mars as seen by the Mars Reconnaissance Orbiter camera. The new light-toned flow, by itself, does not prove that liquid water was involved in its genesis. However, this observation and the similar light-toned flow in Terra Sirenum together show that some gully sites are indeed changing today, providing tantalizing evidence there might be sources of liquid water beneath the surface of Mars right now. In both cases, these new flows may be indicating the locations of aquifers (subsurface rocks saturated with water) that could be detected by orbiting, ground-penetrating radar systems such as the Mars Express Mars Advanced Radar for Subsurface and Ionosphere Sounding or the Mars Reconnaissance Orbiter's Mars Shallow Subsurface Radar. The Mars Global Surveyor mission is managed for NASA's Office of Space Science, Washington, by NASA's Jet Propulsion Laboratory, Pasadena, Calif., a division of the California Institute of Technology, also in Pasadena. Lockheed Martin Space Systems, Denver, developed and operates the spacecraft. Malin Space Science Systems, San Diego, Calif., built and operates the Mars Orbiter Camera. For more information about images from the Mars Orbiter Camera, see http://www.msss.com/mgs/moc/index.html [ http://www.msss.com/mgs/moc/index.html ].
1 2
1-50 of 62