|
|
Browse All
:
2001 Mars Odyssey and Polar of Jet Propulsion Laboratory from 2001
|
Printer Friendly |
First THEMIS Image of Mars
| title |
First THEMIS Image of Mars |
| Description |
This thermal infrared image was acquired by Mars Odyssey's thermal emission imaging system on October 30, 2001, as the spacecraft orbited Mars on its ninth revolution around the planet. The image was taken as part of the calibration and testing process of the camera system. This image shows the temperature of Mars in one of the 10 thermal infrared filters. The spacecraft was approximately 22,000 kilometers (about 13,600 miles) above the planet looking down toward the south pole of Mars when this image was acquired. It is late spring in the martian southern hemisphere. The extremely cold, circular feature shown in blue is the martian south polar carbon dioxide ice cap at a temperature of about -120 °C (-184 ° F). The cap is more than 900 kilometers (540 miles) in diameter at this time and will continue to shrink as summer progresses. Clouds of cooler air blowing off the cap can be seen in orange extending across the image to the left of the cap. The cold region in the lower right portion of the image shows the nighttime temperatures of Mars, demonstrating the "night-vision" capability of the camera system to observe Mars even when the surface is in darkness. The warmest regions occur near local noontime. The ring of mountains surrounding the 900-kilometer (540-mile) diameter impact basin Argyre can be seen in the early afternoon in the upper portion of the image. The thin blue crescent along the upper limb of the planet is the martian atmosphere. This image covers a length of over 6,500 kilometers (3,900 miles) spanning the planet from limb to limb, with a resolution of approximately 5.5 kilometers per pixel (3.4 miles per pixel), or picture elements, at the point directly beneath the spacecraft. The Odyssey's infrared camera is planned to have a resolution of 100 meters per pixel (about 300 feet per pixel) from its mapping orbit. JPL manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The thermal emission imaging system was developed at Arizona State University, Tempe with Raytheon Santa Barbara Remote Sensing, Santa Barbara, Calif. Lockheed Martin Astronautics, Denver, Colo., is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. Image credit: NASA/Jet Propulsion Laboratory/Arizona State University. |
|
First THEMIS Infrared and Vi
…
| title |
First THEMIS Infrared and Visible Images of Mars |
| Description |
This picture shows both a visible and a thermal infrared image taken by the thermal emission imaging system on NASA's 2001 Mars Odyssey spacecraft on November 2, 2001. The images were taken as part of the ongoing calibration and testing of the camera system as the spacecraft orbited Mars on its 13th revolution of the planet. The visible wavelength image, shown on the right in black and white, was obtained using one of the instrument's five visible filters. The spacecraft was approximately 22,000 kilometers (about 13,600 miles) above Mars looking down toward the south pole when this image was acquired. It is late spring in the martian southern hemisphere. The thermal infrared image, center, shows the temperature of the surface in color. The circular feature seen in blue is the extremely cold martian south polar carbon dioxide ice cap. The instrument has measured a temperature of minus 120 degrees Celsius (minus184 degrees Fahrenheit) on the south polar ice cap. The polar cap is more than 900 kilometers (540 miles) in diameter at this time. The visible image shows additional details along the edge of the ice cap, as well as atmospheric hazes near the cap. The view of the surface appears hazy due to dust that still remains in the martian atmosphere from the massive martian dust storms that have occurred over the past several months. The infrared image covers a length of over 6,500 kilometers (3,900 miles) spanning the planet from limb to limb, with a resolution of approximately 5.5 kilometers per picture element, or pixel, (3.4 miles per pixel) at the point directly beneath the spacecraft. The visible image has a resolution of approximately 1 kilometer per pixel (.6 miles per pixel) and covers an area roughly the size of the states of Arizona and New Mexico combined. NASA's Jet Propulsion Laboratory, Pasadena, Calif. manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington D.C. The thermal-emission imaging system was developed at Arizona State University, Tempe, with Raytheon Santa Barbara Remote Sensing, Santa Barbara, Calif. Lockheed Martin Astronautics, Denver, is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. Image credit: NASA/Jet Propulsion Laboratory/Arizona State University. |
|
First THEMIS Image of Mars
| title |
First THEMIS Image of Mars |
| Description |
This thermal infrared image was acquired by Mars Odyssey's thermal emission imaging system on October 30, 2001, as the spacecraft orbited Mars on its ninth revolution around the planet. The image was taken as part of the calibration and testing process of the camera system. This image shows the temperature of Mars in one of the 10 thermal infrared filters. The spacecraft was approximately 22,000 kilometers (about 13,600 miles) above the planet looking down toward the south pole of Mars when this image was acquired. It is late spring in the martian southern hemisphere. The extremely cold, circular feature shown in blue is the martian south polar carbon dioxide ice cap at a temperature of about -120 °C (-184 ° F). The cap is more than 900 kilometers (540 miles) in diameter at this time and will continue to shrink as summer progresses. Clouds of cooler air blowing off the cap can be seen in orange extending across the image to the left of the cap. The cold region in the lower right portion of the image shows the nighttime temperatures of Mars, demonstrating the "night-vision" capability of the camera system to observe Mars even when the surface is in darkness. The warmest regions occur near local noontime. The ring of mountains surrounding the 900-kilometer (540-mile) diameter impact basin Argyre can be seen in the early afternoon in the upper portion of the image. The thin blue crescent along the upper limb of the planet is the martian atmosphere. This image covers a length of over 6,500 kilometers (3,900 miles) spanning the planet from limb to limb, with a resolution of approximately 5.5 kilometers per pixel (3.4 miles per pixel), or picture elements, at the point directly beneath the spacecraft. The Odyssey's infrared camera is planned to have a resolution of 100 meters per pixel (about 300 feet per pixel) from its mapping orbit. JPL manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The thermal emission imaging system was developed at Arizona State University, Tempe with Raytheon Santa Barbara Remote Sensing, Santa Barbara, Calif. Lockheed Martin Astronautics, Denver, Colo., is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. Image credit: NASA/Jet Propulsion Laboratory/Arizona State University. |
|
First THEMIS Infrared and Vi
…
| title |
First THEMIS Infrared and Visible Images of Mars |
| Description |
This picture shows both a visible and a thermal infrared image taken by the thermal emission imaging system on NASA's 2001 Mars Odyssey spacecraft on November 2, 2001. The images were taken as part of the ongoing calibration and testing of the camera system as the spacecraft orbited Mars on its 13th revolution of the planet. The visible wavelength image, shown on the right in black and white, was obtained using one of the instrument's five visible filters. The spacecraft was approximately 22,000 kilometers (about 13,600 miles) above Mars looking down toward the south pole when this image was acquired. It is late spring in the martian southern hemisphere. The thermal infrared image, center, shows the temperature of the surface in color. The circular feature seen in blue is the extremely cold martian south polar carbon dioxide ice cap. The instrument has measured a temperature of minus 120 degrees Celsius (minus184 degrees Fahrenheit) on the south polar ice cap. The polar cap is more than 900 kilometers (540 miles) in diameter at this time. The visible image shows additional details along the edge of the ice cap, as well as atmospheric hazes near the cap. The view of the surface appears hazy due to dust that still remains in the martian atmosphere from the massive martian dust storms that have occurred over the past several months. The infrared image covers a length of over 6,500 kilometers (3,900 miles) spanning the planet from limb to limb, with a resolution of approximately 5.5 kilometers per picture element, or pixel, (3.4 miles per pixel) at the point directly beneath the spacecraft. The visible image has a resolution of approximately 1 kilometer per pixel (.6 miles per pixel) and covers an area roughly the size of the states of Arizona and New Mexico combined. NASA's Jet Propulsion Laboratory, Pasadena, Calif. manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington D.C. The thermal-emission imaging system was developed at Arizona State University, Tempe, with Raytheon Santa Barbara Remote Sensing, Santa Barbara, Calif. Lockheed Martin Astronautics, Denver, is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. Image credit: NASA/Jet Propulsion Laboratory/Arizona State University. |
|
| Description |
MEDIA RELATIONS OFFICE JET PROPULSION LABORATORY CALIFORNIA INSTITUTE OF TECHNOLOGY NATIONAL AERONAUTICS AND SPACE ADMINISTRATION PASADENA, CALIF. 91109. TELEPHONE (818) 354-5011 http://www.jpl.nasa.gov [ http://www.jpl.nasa.gov ] PHOTO CAPTION PIA-03459 [ http://photojournal.jpl.nasa.gov/catalog/PIA03459 ] 2001 Mars Odyssey October 31, 2001 This thermal infrared image was acquired by Mars Odyssey's thermal emission imaging system on October 30, 2001, as the spacecraft orbited Mars on its ninth revolution around the planet. The image was taken as part of the calibration and testing process of the camera system. This image shows the temperature of Mars in one of the 10 thermal infrared filters. The spacecraft was approximately 22,000 kilometers (about 13,600 miles) above the planet looking down toward the south pole of Mars when this image was acquired. It is late spring in the martian southern hemisphere. The extremely cold, circular feature shown in blue is the martian south polar carbon dioxide ice cap at a temperature of about -120 °C (-184 ° F). The cap is more than 900 kilometers (540 miles) in diameter at this time and will continue to shrink as summer progresses. Clouds of cooler air blowing off the cap can be seen in orange extending across the image to the left of the cap. The cold region in the lower right portion of the image shows the nighttime temperatures of Mars, demonstrating the "night-vision" capability of the camera system to observe Mars even when the surface is in darkness. The warmest regions occur near local noontime. The ring of mountains surrounding the 900-kilometer (540-mile) diameter impact basin Argyre can be seen in the early afternoon in the upper portion of the image. The thin blue crescent along the upper limb of the planet is the martian atmosphere. This image covers a length of over 6,500 kilometers (3,900 miles) spanning the planet from limb to limb, with a resolution of approximately 5.5 kilometers per pixel (3.4 miles per pixel), or picture elements, at the point directly beneath the spacecraft. The Odyssey's infrared camera is planned to have a resolution of 100 meters per pixel (about 300 feet per pixel) from its mapping orbit. JPL manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The thermal emission imaging system was developed at Arizona State University, Tempe with Raytheon Santa Barbara Remote Sensing, Santa Barbara, Calif. Lockheed Martin Astronautics, Denver, Colo., is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. # # # # # Image credit: NASA/Jet Propulsion Laboratory/Arizona State University. |
|
First THEMIS Infrared and Vi
…
PIA03461
Sol (our sun)
Thermal Emission Imaging Sys
…
| Title |
First THEMIS Infrared and Visible Images of Mars |
| Original Caption Released with Image |
This picture shows both a visible and a thermal infrared image taken by the thermal emission imaging system on NASA's 2001 Mars Odyssey spacecraft on November 2, 2001. The images were taken as part of the ongoing calibration and testing of the camera system as the spacecraft orbited Mars on its 13threvolution of the planet. The visible wavelength image, shown on the right in black and white, was obtained using one of the instrument's five visible filters. The spacecraft was approximately 22,000 kilometers (about 13,600 miles) above Mars looking down toward the south pole when this image was acquired. It is late spring in the martian southern hemisphere. The thermal infrared image, center, shows the temperature of the surface in color. The circular feature seen in blue is the extremely cold martian south polar carbon dioxide ice cap. The instrument has measured a temperature of minus 120 degrees Celsius (minus 184 degrees Fahrenheit) on the south polar ice cap. The polar cap is more than 900 kilometers (540 miles) in diameter at this time. The visible image shows additional details along the edge of the ice cap, as well as atmospheric hazes near the cap. The view of the surface appears hazy due to dust that still remains in the martian atmosphere from the massive martian dust storms that have occurred over the past several months. The infrared image covers a length of over 6,500 kilometers (3,900 miles)spanning the planet from limb to limb, with a resolution of approximately 5.5 kilometers per picture element, or pixel, (3.4 miles per pixel) at the point directly beneath the spacecraft. The visible image has a resolution of approximately 1 kilometer per pixel (.6 miles per pixel) and covers an area roughly the size of the states of Arizona and New Mexico combined. An annotated image is available at the same resolution in tiff format. Click the image to download (note: it is a 5.2 mB file) NASA's Jet Propulsion Laboratory, Pasadena, Calif. manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington D.C. The thermal-emission imaging system was developed at Arizona State University,Tempe, with Raytheon Santa Barbara Remote Sensing, Santa Barbara, Calif. Lockheed Martin Astronautics, Denver, is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena. |
|
|
