|
Collection:
|
|
NASA Planetary Photo Journal Collection
Collection
NASA Planetary Photo Journal Collection
Collection
|
|
Title:
|
|
Callisto Hemispherical Globes
Title
Callisto Hemispherical Globes
Title
|
|
Original Caption Released with Image:
|
|
The images used for the base of this globe were chosen from the best image quality and moderate resolution coverage supplied by Galileo SSI and Voyager 1 and 2 (Batson, 1987; Becker and others, 1998; Becker and others, 1999; Becker and others, 2001). The digital map was produced using Integrated Software for Imagers and Spectrometers (ISIS) (Eliason, 1997; Gaddis and others, 1997; Torson and Becker, 1997). The individual images were radiometrically calibrated and photometrically normalized using a Lunar-Lambert function with empirically derived values (McEwen, 1991; Kirk and others, 2000). A linear correction based on the statistics of all overlapping areas was then applied to minimize image brightness variations. The image data were selected on the basis of overall image quality, reasonable original input resolution (from 20 km/pixel for gap fill to as much as 150 m/pixel), and availability of moderate emission/incidence angles for topography. Although consistency was achieved where possible, different filters were included for global image coverage as necessary: clear for Voyager 1 and 2; clear and green (559 nm) for Galileo SSI. Individual images were projected to a Sinusoidal Equal-Area projection at an image resolution of 1.0 kilometer/pixel, and a final global mosaic was constructed in this same projection. The final mosaic was enhanced using commercial software. The global mosaic was then reprojected so that the entire surface of Callisto is portrayed in a manner suitable for the production of a globe. A specialized program was used to create the "flower petal" appearance of the images; the area of each petal from 0 to 75 degrees latitude is in the Transverse Mercator projection, and the area from 75 to 90 degrees latitude is in the Lambert Azimuthal Equal-Area projection. The projections for adjacent petals overlap by 2 degrees of longitude, so that some features are shown twice. The northern hemisphere is shown on the left, and the southern hemisphere is shown on the right.
Names shown on the globe are approved by the International Astronomical Union. The number, size, and placement of text were chosen for a 9-inch globe. A complete list of Callisto nomenclature can be found at the Gazetteer of Planetary Nomenclature (http://planetarynam es.wr.usgs.gov).
Original_Caption_Rel eased_with_Image
The images used for the base of this globe were chosen from the best image quality and moderate resolution coverage supplied by Galileo SSI and Voyager 1 and 2 (Batson, 1987; Becker and others, 1998; Becker and others, 1999; Becker and others, 2001). The digital map was produced using Integrated Software for Imagers and Spectrometers (ISIS) (Eliason, 1997; Gaddis and others, 1997; Torson and Becker, 1997). The individual images were radiometrically calibrated and photometrically normalized using a Lunar-Lambert function with empirically derived values (McEwen, 1991; Kirk and others, 2000). A linear correction based on the statistics of all overlapping areas was then applied to minimize image brightness variations. The image data were selected on the basis of overall image quality, reasonable original input resolution (from 20 km/pixel for gap fill to as much as 150 m/pixel), and availability of moderate emission/incidence angles for topography. Although consistency was achieved where possible, different filters were included for global image coverage as necessary: clear for Voyager 1 and 2; clear and green (559 nm) for Galileo SSI. Individual images were projected to a Sinusoidal Equal-Area projection at an image resolution of 1.0 kilometer/pixel, and a final global mosaic was constructed in this same projection. The final mosaic was enhanced using commercial software. The global mosaic was then reprojected so that the entire surface of Callisto is portrayed in a manner suitable for the production of a globe. A specialized program was used to create the "flower petal" appearance of the images; the area of each petal from 0 to 75 degrees latitude is in the Transverse Mercator projection, and the area from 75 to 90 degrees latitude is in the Lambert Azimuthal Equal-Area projection. The projections for adjacent petals overlap by 2 degrees of longitude, so that some features are shown twice. The northern hemisphere is shown on the left, and the southern hemisphere is shown on the right.
Names shown on the globe are approved by the International Astronomical Union. The number, size, and placement of text were chosen for a 9-inch globe. A complete list of Callisto nomenclature can be found at the Gazetteer of Planetary Nomenclature (http://planetarynam es.wr.usgs.gov).
Original Caption Released with Image
|
|
Produced By:
|
|
U.S. Geological Survey
Produced_By
U.S. Geological Survey
Produced By
|
|
Mission:
|
|
Voyager
|
|
Mission:
|
|
Galileo
|
|
Spacecraft:
|
|
Voyager 2
Spacecraft
Voyager 2
Spacecraft
|
|
Spacecraft:
|
|
Voyager 1
Spacecraft
Voyager 1
Spacecraft
|
|
Spacecraft:
|
|
Galileo Orbiter
Spacecraft
Galileo Orbiter
Spacecraft
|
|
Target Name:
|
|
Callisto
Target_Name
Callisto
Target Name
|
|
Is a satellite of:
|
|
Jupiter
Is_a_satellite_of
Jupiter
Is a satellite of
|
|
Instrument:
|
|
Solid-State Imaging
Instrument
Solid-State Imaging
Instrument
|
|
Instrument:
|
|
Imaging Science Subsystem
Instrument
Imaging Science Subsystem
Instrument
|
|
Product Size:
|
|
8860 samples x 4490 lines
Product_Size
8860 samples x 4490 lines
Product Size
|
|
facet_what:
|
|
Jupiter
facet_what
Jupiter
facet_what
|
|
facet_what:
|
|
Voyager
facet_what
Voyager
facet_what
|
|
facet_what:
|
|
Voyager 2
facet_what
Voyager 2
facet_what
|
|
facet_what:
|
|
Voyager 1
facet_what
Voyager 1
facet_what
|
|
facet_what:
|
|
Galileo
facet_what
Galileo
facet_what
|
|
facet_what:
|
|
Galileo Orbiter
facet_what
Galileo Orbiter
facet_what
|
|
facet_what:
|
|
Solid-State Imaging
facet_what
Solid-State Imaging
facet_what
|
|
facet_what:
|
|
Callisto
facet_what
Callisto
facet_what
|
|
facet_what:
|
|
Imaging Science Subsystem (ISS)
facet_what
Imaging Science Subsystem (ISS)
facet_what
|
|
facet_where:
|
|
Jupiter
facet_where
Jupiter
facet_where
|
|
facet_where:
|
|
Callisto
facet_where
Callisto
facet_where
|
|
facet_where:
|
|
Jet Propulsion Laboratory (JPL)
facet_where
Jet Propulsion Laboratory (JPL)
facet_where
|
|
Image #:
|
|
PIA03876
|
|
UID:
|
|
SPD-PHOTJ-PIA03876
UID
SPD-PHOTJ-PIA03876
UID
|
|
orignial url:
|
orignial_url
orignial url
|
